Twin lane linear weigher

cotsswold mechanical CMW4000

Year of construction: 2025, condition: new, Automatic container/capsule filling and sealing machine. - Suitable for the filling of powdery products (coffee, coffee blends, chocolate, milk powder, etc.) in different sized capsule containers (e.g. Nespresso, K-Cup, Lavazza, Tassimo, Bellissimo, without filter, etc.) and subsequent sealing. Automatic dosing, filling by an auger filler. UV sterilization system, anti-static device and vacuum cleaning system for mould formats included. Automatic film feeding and double heat sealing of the capsule. - Specifications: max. speed of the machine in neutral: 90 cups/minute; filling range: 0-20g; filling accuracy: +/- 0.15g; capacity of hopper: 10L (approx. 6kg powder); power supply and consumption: 220V, 7.5kW; required compressed air and flow rate: 6-8 bar, approx. 300L/min; flow rate inert gas: approx. 200L/min; machine dimensions: L3420xW2200xH2688mm; weight: 900 kg. Specifications refer to Nespresso capsules, by use of other brands of capsules specifications may vary. Dodpfjv Nkz Esx Agtswb Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Year of construction: 2012, condition: ready for operation (used), We are offering this ready-to-use Giesen W15A coffee roaster, manufactured in 2012, for sale. Appliance category: I3P Gas: G31 Gas pressure: 30-37-50 mbar Maximum rated power: 29 kW Gas consumption: 1.22 kW Mains voltage: 230 V Dwjdpfx Aozc Na Dogteb Maximum current: 4.6 A Appliance type: B22 If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: new, Year of construction: 2025, Automatic container/capsule filling and sealing machine. - Suitable for the filling of powdery products (coffee, coffee blends, chocolate, milk powder, etc.) in different sized capsule containers (e.g. Nespresso, K-Cup, Lavazza, Tassimo, Bellissimo, without filter, etc.) and subsequent sealing. Automatic dosing, filling by an auger filler. UV sterilization system, anti-static device and vacuum cleaning system for mould formats included. Automatic film feeding and double heat sealing of the capsule. - Specifications: max. speed of the machine in neutral: 55 cups/minute; filling range: 0-20g; filling accuracy: +/- 0.15g; capacity of hopper: 5L (approx. 3kg powder); power supply and consumption: 220V, 1.5kW; required compressed air and flow rate: 6-8 bar, approx. 300L/min; flow rate inert gas: approx. 200L/min; machine dimensions: L1900xW1118xH2524mm; weight: 800 kg. Specifications refer to Nespresso capsules, by use of other brands of capsules specifications may vary. Djdpfx Aev Nkzxjgtewb Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: ready for operation (used), Year of construction: 1996, Two Bosch vertical form fill and seal machines are available. 1) Bosch SVB 2501 A, year of manufacture: 1993, bag type: pillow bag, bag weight: 250g/500g, bag length range: 80mm-250mm, max. production output: 40 cycles/min, power consumption: 3kW, machine dimensions X/Y/Z: approx. 1300mm/2500mm/1700mm, weight: approx. 1100kg. Including clipping unit PS mako BS 600-CSP, year of manufacture: 2015. 2) Bosch SVB 3601 L, year of manufacture: 1996, bag type: pillow bag, bag weight: 250g/500g, max. bag length: 400mm, bag width range: 80mm-360mm, max. production speed: 40 cycles/min. Including clipping unit PS mako BS 600-CSP, year of construction: 2015, documentation available. On-site inspection is possible. Expected to be available from mid-January 2025. Djdpfx Aeu Rc R Segtswb

Condition: refurbished (used), Year of construction: 2021, Project-related overhaul completed in 2020–2021. Originally built in 1991 and fully refurbished by DL Packaging in 2021. Now available again! Since the refurbishment, the machine has operated for only approx. 150 hours – available immediately. Included: FS 110 forming set for pillow bags, 110 mm width Dwedpjx Dapwefx Agtsb FS 180 forming set for pillow bags, 180 mm width Markem X65 TTO printer The machine can produce both pillow bags and block-bottom bags. Includes SDX, printer, and forming sets. Capacity: 50–80 bags/min, depending on bag format, film thickness, filling product, dosing system, and synchronization. Delivery time: On request. If you are interested in this machine, it will be modernized by DL Packaging according to your product and specific requirements.

Year of construction: 2023, condition: new, Semi-automatic auger filler for 100-5000g. Suitable for dosing and filling powdery products. Stand-alone version including screw conveyor and storage container. Also included are: horizontal screw conveyor to prevent undesired trickling, dust removal preparation, PLC control and touch monitor, weighing sensor (works automatically with each dose), bag clip mechanism, screw conveyor for 500 and 2000g doses, lid for screw conveyor so it is closed. Suitable for filling into bags, cans, glasses, other containers. - Specifications auger filler: hopper volume: 50 litres; filling weight: 10-5000g (change of dosing screws required); stainless steel version AISI 304; servo motor; packaging accuracy: 1-2% (depending on product and total weight); max. speed of the machine in neutral: 50/minute; current: 1.5kW, 3P, 380V; machine dimensions: L600xW800xH1000mm; weight: 100kg. The screw conveyor has a stainless steel AISI 304 body with stainless steel pipe. The feed hopper holds 230 litres and is equipped with a vibration motor for uniform product flow. - Specifications screw conveyor: Conveying capacity depending on product: up to 3 m³/h; standard angle: 45° (can be customized 30-60°); pipe diameter: 141mm; power: 1P, 380V, 3kW; machine dimensions: size depends on the customized end system (hopper, conveying length and angle can be adjusted); weight: approx. 150kg. The drawing just shows the auger filler. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Dwsdpfogzp Ekex Agtsb

Condition: new, Year of construction: 2025, Complete vertical packaging system for dosing coffee beans AND ground coffee and packaging in coffee stand-up pouches with aroma valve. The system is equipped with two separate dosing systems (auger filler for powder, volumetric cup dosing unit for granules) and also has a Z-conveyor, screw conveyor, outfeed conveyor and an AMTEC PRO P60L as VFFS packaging machine. A hot stamping printer for date, batch number (optional: thermal transfer printer on request), an anti-static module, stand-up pouch module (gusset device) and flat-bottom module (bottom seam is applied tightly to bottom, depending on the film material) are also part of the equipment. - Specifications VFFS: Stable film pulling by vacuum; MITSUBISHI/SIEMENS PLC, WEINVIEW touch screen operator interface; mark sensor registration control; quick change former assembly, pneumatic sealing unit; servo motor film pulling; bag size: L(100-300)xW(80-240)mm; max. speed of the machine in neutral: 60 cycles/minute; stainless steel; 220V/3.5kW; 6bar, 0.36m³/min; machine dimensions: L1550xW1160xH1480mm; weight: 600/700kg. - Specifications volumetric dosing unit: 4 cups; perfect for free flowing granulate like products (rice, salt, sugar, etc.); stainless steel; dosing range: 80-2.000ml; max. speed of the machine in neutral: 60 cycles/minute; - Specifications: stainless steel; filling system with rotating screw; Servo motor; filling weight: 10-2000g; 50 liter filling hopper; accuracy: 0.5-2%; max. speed of the machine in neutral: 60 cycles/minute; airproof; damp pressure, side opening hopper, including dust collector. Dwsdpfx Agsv Nmh Ijtob Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: used, functionality: fully functional, Original PROBAT 60 industrial roaster, manufactured in 1970, equipped with a wood-fired heating system. A robust, heavy-duty machine, renowned for its high durability and excellent roasting quality. Dedpfozcl U Dex Agtjwb Includes: - Cooler - Cyclone - Exhaust system The machine is currently disassembled and ready for transport.

Condition: used, Year of construction: 2006, Multihead weigher with platform and conveyor. Manufacturer: Bilwinco Model: DW6014-D Year: 2006 Power consumption: 5000 VA Weighing range: 10g - 1000g IK max : 10 KA Frequency: 50 Hz Voltage: 3 x 400V, PE Compressed air: 5 - 10 bar Dwodpfx Agox Rz E Njtob Equipment included : 1 x Multi-head dosing machine 4 x feet 1 x Spare parts 1 x Elevator conveyor with electrical cabinet and belt 1 x Storage trolley for washing and transporting buckets

Year of construction: 2025, condition: new, Auger dosing unit for powder. Dosing by rotating auger. - Specifications: filling range: 5-3000g; filling hopper capacity: 50 liters; hopper with side opening; stainless steel 304 design; power supply: 220~415V; power consumption: 1.4kW. Djdpfxsv Nnmrj Agtowb Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.