Laser sinter

Farsoon FS HT1001P

Type: Farsoon FS HT1001P

System configuration: build station, preheating station, cooling station

Automated job changeover between two build cylinders

Scanner from Chinese manufacturer, deviates from standard series

Modifications and condition:
- Overflow system upgraded with automatic draining
- Laser protection windows renewed, approx. 200 operating hours
- Heating elements replaced, approx. 500 operating hours
- IR camera ports available (cameras not included)
- Curtains installed in build chamber
- Printer operating hours: less than 2,000 h

Dimensions: 5,585 × 3,410 × 2,980 mm
Weight: approx. 5,000 kg
Maximum build size: 1,000 × 500 × 450 mm
Build chamber throughput: up to 15 liters per hour
Scanner: 2 × high-precision 3-axis galvo system
Scan speed: up to 15.2 m/s
Layer thickness: 0.06 – 0.3 mm
Laser: 2 × CO₂ lasers, each 100 W
Maximum chamber temperature: 220 °C
Thermal control: multi-zone heating with intelligent temperature management
Temperature regulation: real-time monitoring and optimization
Operating system: 64-bit Windows 7
File format: STL
Software functions: manual and automatic control, real-time parameter adjustment, 3D visualization and diagnostics
Recommended materials: FS3300PA, FS3250MF, FS3400GF, FS-TPU
Voltage: AC 380 V, 3 phase, N/PE
Frequency: 50 to 60 Hz
Total power: 25 kW
Maximum current: 45 A
Voltage fluctuation: ± 10%
Protection: 3 × 50 A

Preheating station:
- No active preheating
- Used for storing build cylinders for automated changeover
- Roller blinds as protection from crushing and burning hazards

Cooling station:
- Nitrogen flooding with sealing
- Surface temperature measurement of powder cake
- Roller blinds as safety feature

Cooling system (Deltatherm):
- Compressor power: 1.32 kW
- Pump power: 0.45 kW
- Flow rate: approx. 18 l/min
- Pump pressure: approx. 5.0 bar
- Cooling medium: potable water
- Connections: supply and return, 3/4" female thread
- Tank volume: approx. 30 l
- Air volume: approx. 2,250 m³/h
- One axial fan
- Fan power: 135 W
- Dimensions: W 740 mm, D 740 mm, H 500 mm
- Weight: approx. 110 kg

Nledey Hg S Tjpfx Ah Noa
Unpacking station (Powder Breakout Station):
- Dimensions: 1,870 × 920 × 2,150 mm
- Weight: approx. 1,200 kg
- 200–240 V
- Frequency: 50–60 Hz
- Total power: 2 kW
- Max current: 10 A

Powder handling Schleiss RPTech:
- Function: mixing, sieving, and conveying plastic powders
- System creates a fully enclosed powder cycle
- Components: powder mixing unit with mixer and sieving machine, containers for mixed powder, overflow powder, used powder, and fresh powder
- Pumps for material transport between containers
- Humidification module included
- Vibrating motor for sieve not included

Powder handling mixing and sieving system technical data:
- Dimensions: 1,800 × 815 × up to 2,600 mm height
- Weight: approx. 240 kg
- Temperature range: 0 – 40 °C
- Mixing throughput: approx. 10 l in 8 min
- Sieving throughput: 5 kg in 3 min
- Voltage: 230 V at 50 Hz, 16 A protection
- Mixer power: 210 W
- Extraction power: 2,200 W
- Air requirement: approx. 100–140 l/min
- Operating pressure: 5–6 bar

Condition: used
Scope of delivery: (see picture)
(Technical data subject to change and error!)
Further questions gladly answered by phone.

The listing was translated automatically. Translation errors are possible.