Powder Coating Line

Coperion ZSK 34

Condition: good (used), Year of construction: 2006, machine/vehicle number: Serien Nr. 64019447, Used Coperion Werner and Pfleiderer ZSK 34 Mvc twin-screw extruder for sale. The extruder was used for powder coatings Nlodpfevcyk Njx Af Ssk

Year of construction: 2022, condition: new, Machine Type: Extruder - Sheet line Nedpsh E Dx Ijfx Af Solk Brand: Dupatech Model: HIPS/PP Year: NEW Output (Kg/hr): 250 - 1050 Energy consumption: 0.18 - 0.2 Kwh/Kg.hr Sheet width: 400 mm - 1500 mm Sheet thickness: 0.25 mm - 2.0 mm

Condition: used, Year of construction: 2006, Kahl Twin Screw Extruder is a machine manufactured by Kahl in 2006. Currently stored in Germany, it comes equipped with a fine grain hopper, fine grain discharge, fine grain sack, a belt unit (Type: BTK 1510-0), water addition, extruder, supply air blower, reconditioned in 2016. It also includes dust removal, tumbler sieve, dedusting, final packaging, belt dryer, product hopper, pipe chain conveyor, cyclone, rotary valve, distributor, dust sack, exhaust air blower, air stream rotation dryer, feed table, mixer, and an additional air supply blower and belt dryer. The delivery terms are FCA. Equipment: 1 x feed table, 1 x tube chain conveyor, 1 x mixer 1 x water addition, 1 x extruder, 1 x supply air fan, 1 x cyclone, 1 x rotary valve, 1 x distributor, Nlsdpfx Afsvfxqyj Sek 1 x belt dryer, 1 x product hopper, 1 x tube chain conveyor, 1 x fine grain hopper, 1 x fine grain discharge, 1 x fine grain bag, 1 x supply air fan, 1 x belt dryer, 1 x rotary valve, 1 x dust bag, 1 x exhaust fan, 1 x airflow rotary dryer, 1 x dedusting, 1 x tumbling screen, 1 x bar removal, 1 x final packaging 1 x belt unit, type: BTK 1510-0 refurbished 2016

Condition: excellent (used), Year of construction: 2014, operating hours: 19,000 h, functionality: fully functional, Gabler M92L thermoforming machine, in excellent running condition. Nedpfx Ajwcdvnjf Selk

Condition: excellent (used), Haitian Type: Mars3 5300WM/2400-720 Overall dimensions: WxHxD mm (8700 x 2800 x 2500) Screw diameter 2400: 70 mm 720: 45 mm Injection volume 2400: 1239 cm³ 720: 334 cm³ Nlodpfx Aovvlv Ref Sok Injection capacity 2400: 1127 g  720:  304 g Injection rate 2400: 300 g/s 720: 142 g/s Injection pressure 2400: 198 MPa 720: 222 MPa Screw speed 2400: 0-184 r/min 720: 0-180 r/min Diameter of turntable : 1250 mm Max load on turntable: 3.3 t Power connection: AC 400V 3P/N/PE 50 Hz 25 kA 227 A Injection unit: Single and double cylinder control 3 modes for injection retraction Closing unit: Closing force 5300 kN Connection for Euro 18 robot Safety door Condition: used Scope of delivery: (See picture) Sale from location! Weight: approx. 31000 kg (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: new, Year of construction: 2025, SAPI Powder Coating The perfect layer for lasting protection. Powder coating is a highly effective and widely used method for applying a protective and decorative finish to various types of surfaces. It is a dry finishing process in which a fine powder composed of resin, pigments, and additives is applied to a substrate. The powder is electrostatically charged so that it adheres evenly to the surface, forming a uniform coating. To achieve optimal adhesion and durability, the substrate is first thoroughly cleaned and prepared. Oils, dirt, and other contaminants are removed to ensure a clean surface. This is crucial for the powder to bond effectively to the substrate and achieve a strong and long-lasting coating. A powder coating system typically consists of various components and equipment required for the application and curing of powder coatings. SAPI_Powder_spray_gun Spray Booth and Spray Area The booth provides a clean environment for the application process and ensures even powder distribution. Powder Coating Gun A powder coating gun is used to apply the powder coating to the workpiece. Powder Feed System The powder feed system consists of a hopper or container in which the powder coating material is stored. It typically includes equipment such as powder pumps, feed hoses, and powder screens to transport the powder from storage to the spray gun. Pretreatment Equipment Pretreatment equipment is used to prepare the substrate before the powder coating is applied. This may include processes such as cleaning, degreasing, rinsing, and surface treatment to ensure good adhesion and durability of the coating. Curing Oven A curing oven is an essential component of a powder coating system. It is used to heat the coated substrate to the correct temperature so that the powder coating can melt, flow, and cure into a durable finish. The oven typically consists of a conveyor system or racks to transport the coated parts through the oven chamber. Nodpswf Dpgofx Af Sslk Exhaust system An exhaust system will be installed in the facility to extract excess powder, fumes, or volatile compounds generated during the coating process. This system helps maintain a clean and safe working environment for personnel and prevents the accumulation of powder particles in the air.

Condition: used, Year of construction: 2000, COMPLETE BOTTLING LINE PET 18,500 BPH Product: PET Bottles Speed: 18,500 BPH (2 L bottles) PET Preform Tipper VE.CO. – Year 1997 Model: 30L917 PET Preform Orientator Sidel – Year 1999 Model: XMMC94 PET Blower Sidel – Year 1999 Model: SBO14 Number of molds: 14 Air recovery system Air Conveyors Lanfranchi – Year 2007 Monoblock Sidel-Simonazzi and Capper Arol Model: EUROSTAR RAA282 – Year 1985 Direction: Clockwise Rinser 50 grippers Manual carousel height adjustment Fixed nozzle 1 treatment with water Fillers 80 valves Filling type: Isobaric Valve type: Mechanical Valve functions: Degassing and sanitization Electric tank height adjustment Capper Arol 10T – Year 1998 Model: TS EURO/K10T.350O Manual head height adjustment Cap type handled: 3-START HEXALITE Cap dimensions: Ø 28.6 mm h: 10.5 mm Cap feeding system: Pick & Place Nitrogen Doser Terboven – Year 2008 Model: ISTE-CON 5 Cap Elevator P.Q.L. Mechanics – Year 2011 Model: 09B3 Type: Pneumatic Level and Cap Inspector Heuft (Spectrum) – Year 2013 Model: HBBVXTXXX Inspection type: Cameras Checks the fill level; cap presence; incorrectly screwed caps Complete with ejector Labeller Krones – Year 1998 Nedjwditnspfx Af Sjlk Model: CONTIROLL Direction: Clockwise Electric head height adjustment 15 plates with mechanical cam Number of stations: 1 Labeling type: Roll-fed Label types: WRAP-AROUND Label Presence Inspector Heuft (Reflexx) – Year 2023 Model: ONE Inspection type: Cameras Lumonics Laser Marker – Year 2009 Model: SL301 Bottle Conveyor Belts Procomac – Year 2000 Model: P 3233/1A Divider Procomac – Year 2000 Model: P3227 Shrink Wrapper Zambelli – Year 1999 Model: LFT3657 Version: Film launch Type: Film only Shrink Pack Conveyors Procomac – Year 2000 Model: P 3233/1A Batch Coder Markem – Year 2010 Model: 9040 Type: Inkjet Handle Applicator Comag – Year 1999 Model: H65/1 Bundle Divider L.M. – Year 2000 Model: 28809 Palletizer ACMI – Year 1999 Model: RASAR C/1350 Type: Pusher Double infeed Pallet magazine Interlayer System Pallet Wrapper Tosa-Acmi – Year 2012 Model: 120+475 Wrapping type: Rotating arm Top sheet dispenser Pre-stretch Pallet Printer Eidos – Year 2009 Model: 7P6NRSA General Information: Supported bottle dimensions: Ø min: 89 mm; Max Ø: 95 mm Height min: 145.90 mm; Max height: 344 mm

Year of construction: 2015, condition: excellent (used), Machine for electro-chemical deburring incl. automation, washing system for removing the electrolyte from the parts surface and filtration unit. SALE IN EU / SWITZERLAND / UK ONLY. Nodjlgzbnopfx Af Sslk

Year of construction: 2014, condition: used, Used powder coating line. Shutdown in 2024. - container mixer Mixaco, typ CM1000-MT, with 4 x ss tank 800Ltr new.: 2014 - extruder Coperion, ZSK 43 MV, new.: 2014 - SBS Cooling Conveyer 800mm wide x 5000mm long - mill Hosokawa Alpine, typ ACM40 EC CL, new: 2014 - dosing device Gericke, typ GL D 7, new: 2014 - feeding device Hosokawa, new: 2014 - pressure filter Hosokawa Alpine, new: 2014 Nedsvxrm Uopfx Af Sjlk - stainles steel cyclone diam.: 500 mm - 2x rotary screen AZO, typ E 240 - pocket filter, with 45 kW el. motor - cooling unit Climaveneta typ NX/K 0914P - cooling unit Climaveneta typ NX/K 0552P

Condition: used, Powder coating line Includes: - Polyester-lined paint booth with 3x1m internal capacity - Equipped with an external door for painting - Inlet and outlet opening size for parts carousel: X - Side window opening size for painting: X - Drying oven 3x1m Nlodpfx Aexgnpkof Sok - Brand: SART - Model: HE - Power: 18,000W - Powder coating gun - Brand: X - Model: X - Carousel with roller carts for part transport (approx. 20 meters) - Cyclone for air and powder re-circulation (blue) - Powder filter with Telemecanique frequency inverter - Silent piston compressor (used) NUAIR + HERTZ dryer - Silent piston compressor, brand Nuair, model AIRSIL 2, 5.5hp, 270L tank, 640L/min, 952 hours of use, year 2020 - Air dryer, brand Hertz, model HRD 40, single phase 220V *Installation dismantled and in storage at our premises. Sold as is.