Bandsaw/ resaw

CENTAURO R800

Condition: used, Functionality: fully functional, power: 15 kW (20.39 HP), Automatic resaw with pneumatic opening Kljlhcdwswdf Uhovsr

Condition: excellent (used), Year of construction: 2006, Centauro R800 Resaw Wheel diameter 800mm Maximum cutting height 400mm Kolhcjv S Dqljdwvolr Maximum saw width 80mm Cutting band length approx. 5550mm Main engine 11kw Work table tiltable at an angle of 15° Feed speed regulated by means of a variator Extraction port 120mm

Condition: new, Year of construction: 2025, - Smooth feed speed adjustment: 30 m/min - Feeding table with rollers - Maximum cutting width: 210 mm - Maximum cutting height: 38 cm - Year of production: 2025 - new Kelhcdwevzwigovjlr - Main motor power: 11 kW - Maximum saw length: 5530 mm - Minimum saw length: 5380 mm - Wheel speed: 680 RPM - Weight: 880 kg

Condition: new, Year of construction: 2024, A versatile saw for cutting wood for veneers, lamellas and the like. Height of workpieces up to 400 mm. The powerful feed rate gives a very high performance. The R800 is a solid saw. In the R800, it is possible to use tapes of different widths. It is equipped with a mechanical feed of the workpiece. It is designed so as to easily cope with work in conditions of high load of the main engine and high processing speed (up to 30 m / min). It is possible to use a tape with a width of 80mm. The sturdy frame of the machine is made of welded sheet steel. Massive flywheels made of cast iron ensure maximum efficiency, and the wheels are mounted on dustproof ball bearings. The lower part of the saw blade is specially reinforced, which allows a higher degree of inertia (inertia) to be achieved without excessive starting and braking loads. To further improve the evenness of work, the guides are specially ground so that they remain carefully balanced. Diameter of saw wheels 800 mm Max. cutting height 400 mm Max.cutting width 770 mm Height of table from 960 mm Table size 1060 x 800 mm Max. and min. blade length 5530/5380 mm Width of blade 80 x 0,8 mm Motor power 11 (HP 15) kW R.P.M. of wheels 680 R.P. M. Sawblade speed 28,5 mt./sec. Sawdust hoods 1 Ø 100 mm. 2 Ø 120 mm. Required capacity for extraction system (for air speed 20 mt./sec.) 3840 m3/h Compressed air consumption 60 Lt./min. Working pressure of pneumatic brake 6 - 8 bar Net weight 880 kg RVP210 Height of feeding roller 50 mm Feeding roller diameter 200 nm Standard feeding rollers 2 nr. Height of standard rollers fence 300 mm Length of Rollers fence 600 mm Rollers fence tilt 0-45° Max. Roller-blade clearance 200 mt/sec Max. fence-blade clearance 420 mm Klslhcdegp I U Nowvjr Motor power 0,37 kW Variable feed speed rate 0-30 mt./min Compressed air consumption 30 Lt/min. Working pressure 3 - 6 bar Net weight 180 Kg

Condition: new, Year of construction: 2024, power: 11 kW (14.96 HP), CENTAURO R800 band saw + feed RVP-210 Specifications: - condition - new - manufacturer - CENTAURO - diameter of circular wheels - 800 mm - maximum cutting height - 400 mm - maximum cutting width - 780 mm - maximum blade width - 80 x 0.8 mm - maximum and minimum blade length - 5530 / 5380 mm - wheel speed - 680 rpm - belt speed - 28.5 m/sec Kljlhcdwoqu Uy Sevjr - height of the working table from the floor - 950 mm - table dimensions - 1060 x 800 mm - inclination of the table - 15° - motor power - 11 kW = 15 HP - sawdust hood - 1 x Ø 100 mm. 2 x Ø 120 mm. - capacity of the extraction system (air speed 20m/8sec) - 1430 m3/h. - air brake working pressure - 6 - 8 bar - net weight - 700 kg - noise level - 81.6 dB - 2023 year of production - feed RVP-210 included in the price of the machine Additional information: - machine brand new - the presented photos illustrate the actual state of the object of sale - the price given in the auction does not include VAT and transport costs - available from stock in Italy

Condition: new, Year of construction: 2025, CENTAURO R800+RVP 210 slat and veneer band saw Kljlhevz A S Tjcdwvsr Maximum cutting height 38 cm Maximum cutting width 210 mm Main engine power 11 kW Feed RVP 210 manual or pneumatic opening Smooth feed speed adjustment 30 m/min Main engine power 11 kW Saw length 5530-5380 mm Maximum blade width 80 x 0.8 mm Feed table with rollers Year of production 2025

Condition: excellent (used), Year of construction: 2017, Functionality: fully functional, Bandsaw Centauro R-800 + RVP200 Year of Manufacture: 2017 Technical detalis: - Speed: 680 rpm - Dimensions: 1550 x 1900 x 2370 mm - Wheel Diameter: 800 mm - Maximum Cutting Height: 400 mm - Maximum Cutting Width: 780 mm - Maximum Blade Width: 80 x 0.8 mm - Blade Length Range: 5380 – 5530 mm - Wheel Speed: 680 rpm - Table Height from Floor: 950 mm - Table Dimensions: 1060 x 800 mm - Table Tilt: up to 15 degrees - Power: 11 kW + 0.55 kW - Weight: 700 kg Kolhcsv T Tc Tedwvslr RVP200 FEEDER

Condition: used, Roller diameter: 800 mm Max. cutting height: 440 mm Max. cutting width: 785 mm Table height: 970 mm Table dimensions: 1170 x 800 mm Blade width: 40 x 7/10 mm Blade length: 5630 mm Extraction diameter: 120 mm Dimensions: 1625 x 940 x 2516 mm Weight: 770 kg Storage location: Nattheim Kslhcdwewayzbevolr

Condition: new, Thin layer from 2 mm thickness Maximum cutting accuracy up to ± 0.15 mm Minimal kerf, cutting thickness from 1.3 mm Ideal for the cutting of dried and wet wood or alternative materials Surface of the thin layer ready for gluing without need of further processing steps Friendly user electronic control Two programmable speeds of the carpet (0-30 m/min) for the best cutting quality and to safeguard the blade life Optical sensor to start cutting cycle and speed change Ground table “Flexam” belt feeding for the best performance 6 rubber idler rollers adjustable in height, for opening/closing to ensure the best pneumatic pressure on the workpiece during feeding and cutting Oleo-pneumatic tensioning of the blade for better cutting performance Top and bottom ‘’Chaco’’ blade-guides which guarantee the best stability blade during cutting Internal/external lubrication of the blade to remove residues of resins and chips 4 dust extraction to optimize the suction of dust and chips Cutting height of 400 mm (500 mm optional) Cutting width up to 400 mm High quality powerful motor kW 15 (HP 20) Ethernet connection for on line service Carbide or stellite blades for best cutting performance DM of saw wheels mm 800 Max. cutting height mm 400 fixed working table mm 1290 x 800 Kjlodcd Dlshcdwvelr Max. saw blade width mm 54 x 0,9 Max. & min. saw blade length mm 5530 / 5380 motor Kw 15 (HP 20) suction connection nr 2x Ø 120 & 1 x Ø 100 compressed air requirement bar 6/ 27 ltd machine weight Kg 880 feed speed m/min 0 - 30 height of feeder belt mm 300 length of feeder mm 750 feeder roller DM mm 160 Max. feeder opening mm 200 Max. fence opening mm 200 feeder speed var. mt/ min 0-30

Condition: like new (used), Year of construction: 2021, operating hours: 100 h, Functionality: fully functional, machine/vehicle number: 32957, feed length X-axis: 2,800 mm, feed length Y-axis: 180 mm, feed length Z-axis: 150 mm, drill spindle length: 160 mm, working range: 3,000 mm, working width: 180 mm, type of input current: three-phase, input voltage: 380 V, feed rate X-axis: 35 m/min, feed rate Y-axis: 7 m/min, feed rate Z-axis: 7 m/min, travel distance X-axis: 2,800 mm, travel distance Y-axis: 180 mm, travel distance Z-axis: 150 mm, overall weight: 1,250 kg, workpiece length (max.): 2,800 mm, workpiece width (max.): 180 mm, workpiece height (max.): 100 mm, table height: 860 mm, table width: 180 mm, Equipment: documentation/manual, ELECTRONIC 3-AXES MILLING MACHINE Kslhcdjv Rf N Towvjlr

Condition: good (used), Code: 0460 Brand: CENTAURO Model: SRM GOLD LINE 5000 - CE Standard Rip saw for solid timber , wooden boards, furniture, window frames and various - CE Standard Composition: Automatic-cycle bridge sawblade guard with anti-static P.C. moving segments and built-in suction pipe Device for retractable sawblade with 3-position height selector Electronic programmer with measurement repeater Device for automatic slow down of cutting speed in heavy working conditions Klolhcdovg E Rijwvjr Blade feed with gear motor and three-phase inverter Max speed limiter with potentiometer Sliding control panel 2-speed fence movement (fast/slow) Two-handed safety electrical control Widia sawblade diameter 550 mm Laser unit complete with support and guard Cutting length mm 5320 Cutting width mm 600 Cutting height mm 160 Blade diameter mm 550 F 30 Blade motor Hp 15 Blade feed motor with inverter Hp 2 Variable blade feed speed mt/min 0-80 Blade return speed mt/min 80 Working table height mm 870 Working pressure 6 bar Diameter of suction ports N°. 2 mm 130 - N° 1 mm 200 Overall dimensions: mm 7135 x 1535 x 2125 h Weight kg 2200

Condition: new, Year of construction: 2025, Functionality: fully functional, exhibition machine minimum slat thickness 2mm magnetic fence position reader Kelhcdwjv Dh R Tjvolr adjustable pulling roller spacing material presence detector tape cooling/lubrication system wheel diameter 800mm engine power 15kW smooth feed speed adjustment pneumatic pulling roller pressure control panel with colour touch screen screw tape centring pneumohydraulic tape tensioning year of production 2025 - brand new machine total weight 1300kg 380V power supply Machine available in March

Condition: new, Functionality: fully functional, Centauro DDC/E-7P3 280 28KW Industrial Cubic Cooler Evaporator. Specifications: Capacity Size:28 KW Model:DDC/E-7P3/280DDC/ Kljlhcdstpiyrswvsr Voltage:400 VOLTS Frequency:50 HERTZ Phase:3 Good working condition. Please check out our other listings as well.

Condition: used, SECOND-HAND BAND SAW CENTAURO MOD. 800 Ksler Ilxcshcdwvolr

Condition: excellent (used), Year of construction: 1995, Functionality: fully functional, Centauro T5 1600,automatic copy lathe with hydraulic control S/N 5110 year of construction 1995 Max center width: 1600mm Max length of the production part: 1000mm Max length of the eccentric part: 520mm Max size of the square wood 60 x 60mm Maximum turning diameter allowed by the large steady rest 140mm Largest turning diameter that the large steady rest allows 90mm Kslhcjrclwxjdwvelr Diameter of the tailstock quill: 60mm Copying stroke 150mm Center height on the bed 226mm Largest turning and milling diameter 250mm Rotating steady rest ( ring steady rest ) Spindle speed: 900/ 1500/1800/2250 / 3000 / 4500 R.P.M Copied from sample workpiece Copied from template 2 copying supports Slide feed speed : 0-6m/min Spindle motor 4,5kW Hydrl. Pump motor : 1,5 kW Working pressure of the hydraulic system: 25 bar Installed power 5,67 Kw Net weight 1340 kg

Condition: excellent (used), Functionality: fully functional, Centauro CO700 Band Saw Klelhcdwevyp I Sovjr Saw wheel diameters 700mm Max. cutting height 460mm Max. cutting width 680mm Max. band width 40×0.6mm Motor power 3kw Wheel rpm 736r.p.m CE certificate Year of production 1997

Condition: new, Year of construction: 2025, Diameter of saw wheels mm 800 Max. cutting height mm 400 Stationary working table mm 1290 x 800 Max. blade width mm 54 x 0,9 Kjlhcdjglfv Dewvolr Max. and min. blade length mm 5530 / 5380 Motor power Kw 15 (HP 20) Sawdust hoods nr Nr. 2 Ø 120 Nr. 1 Ø 100 Compressed air consumption (wheels braking and feeder opening) bar 6 Net weight Kg 880 Feeder Height of feeding carpet mm 300 Length of carpet fence mm 750 Idle rollers dia. mm 160 Max. rollers-blade clearance mm 200 Max. fence-blade clearance mm 200 Variable feed speed rate mt/min 0-30

Year of construction: 1990, Condition: excellent (used), I sell the vertical band saw Centauro 1000ST. Klelskdzp Eehcdwvor Motor power 7,5KW Condition very good. Available immediately.

Year of construction: 1989, Condition: excellent (used), Hydraulic copy lathe for wood Automatic cycle turning system with one programmable copier for one or two passes Hydraulic copying unit with touch probe Maximum distance between centers mm 1300 Maximum diameter mm 250 Tailstock sleeve diameter mm 60 Stroke of the tailstock sleeve mm 100 Carriage feed speed mt/min 0/6 Kslhjm Tz Tuocdwvjlr Trolley return speed mt/min 7.33 Spindle speed rpm 900/1500/1800/2250/3000/4500

Condition: excellent (used), Saw wheel diameter 800 mm Max. Cutting height 520 mm Max. Cutting width 780 mm Table height from floor 970 mm Table dimensions 1170×800 mm Max. min. belt length 5670/5540 mm Max. Belt width 45 x 0.7 mm Klelstrdk Dehcdwvjr

Condition: excellent (used), saw band length: 4,650 mm, saw band width: 35 mm, total height: 2,075 mm, Centauro CO 600 Roller diameter 600 mm cutting height 360 mm cutting width 580 mm Table dimensions 810 x 580 mm Kjlju Uictshcdwvelr Belt length 4650/4550 mm RPM 715 Space requirement LWH 1165 x 760 x 2075 Motor power 2.2 kW Condition as good as new year of construction 2012 Price 2800.-

Condition: used, Technical data: Max cutting height: 360 mm Max cutting width: 680 mm Wheel diameter: 700mm Belt adjustment range: 4870-4970 mm Max tape width: 40mm Minimum tape width: 10 mm Work table dimensions: 650x700 mm Kljlhcdwei D D D Tover Working table inclination: 0-20° Extraction spigot diameter: 2x100 mm Culag: 630mm Motor power: 3 kW Voltage: 400V Brake Safety switch Overall dimensions: Length: 830mm Width: 1200mm Height: 2190mm

Condition: good (used), Year of construction: 2000, Functionality: unexamined, machine/vehicle number: 00/8541, USED Band saw Wheels diameter 800 mm Max Cutting hieght 520 mm Max Cutting width 780 mm Table Dimensions 1170x800 mm Tilting table 20 degree Motor 4 kW R.P.M. of wheels - 660 rpm Compressed air 6 bar Outlet 2x120 mm Kljlhcdwoqu Nwfsvsr

Condition: as good as new (ex-display), Year of construction: 2023, Automatic loading and unloading Advanced machining capabilities Ideal for volume production Elevate your door frame lining production with the Centauro Alfa Jamb, a state-of-the-art machine designed for the automatic loading, machining, and unloading of door frame linings and jambs. Combining precision, efficiency, and user-friendly technology, the Centauro Alfa Jamb is the ultimate solution for door frame manufacturing. The powerful CNC router head is capable of performing both vertical and horizontal machining operations. This versatile router head excels in hinge and lock plate recessing or slotting, ensuring each cut is executed with precision and consistency. Additionally, a specialised small router is included for spot drilling hinge screw holes and squaring the corners of hinge recesses, enhancing the accuracy and finish of your products. The Alfa Jamb automates the entire process from loading to unloading, allowing your operators focus on higher-level tasks while the machine handles the repetitive work. Programming is simple thanks to the latest generation TOP12-S color graphic touch screen controller. This user-friendly interface features pre-installed electronic macros, allowing you to quickly set up and adjust machining operations with ease. Kljlheul Uaaecdwver Specification Technical Information X Axis stroke 2800mm Y Axis stroke180mm Z Axis stroke 150mm Suitable for Jamb dimensions of 2400mm x 200mm x 75mm Router / Milling head 3.3kw, ER25, 0 to 18000 rpm Pilot Hole Drilling Head 2.2kw ER 25, 0 to 18000 rpm 3 x pneumatic vertical workpiece clamps, automatically activated through the program 3 x pneumatic horizontal workpiece clamps, automatically activated through the program Top 12-S industrial touch screen control 12" with simple macro programming CE safety perimeter guarding to sides / rear with a front light beam curtain Dust extraction connection 120mm Pneumatic supply 6 Bar Overall Dimensions 9644 x 1844mm Overall weight 2000kg Total load 5.6kw Year - 2023 CE. Condition - As new, only used for showroom demonstrations

Condition: ready for operation (used), Technical characteristics Max. mortise depth : 150 mm Max. mortise length : 340 mm Longitudinal stroke : 300 mm Cross-travel : 80 mm Max. height of upright on worktable : 300 mm Working table dimensions : 400 x 135 mm Table inclination : -45° to +45°. Mechanical front press Pneumatic door locking Aluminium extension with mechanical stops Guiding rod for horizontal door positioning Compressed-air gun for machine cleaning Door support Automatic chain lubrication pump Kslhcdst Dga Njwvslr Manual vertical travel Power and Motors Voltage: 400 V Pluging: Three-phased Power: 2,2 Kw Motor: 3 CV Overall dimensions Lenght: 1916 mm Width: 1400 mm Height: 1026 mm Weight: 420 Kg