Drying oven for Cefla UV line

Cefla

Condition: excellent (used), Year of construction: 1999, I sell the 1-lamp UV-drying tunnel Cefla UV TTE 2000 Year 1999 Working width 1400mm. Total length 2,00m 1 Lamp GA 120 W Gsdpfx Ahjynvw Ho Sjtw Very good condition, available immediately.

Condition: good (used), functionality: fully functional, number of engines: 4+4 opening: 6 meters Godpfjw D Nq Tsx Ah Sotw

Condition: excellent (used), Year of construction: 2006, I sell the roller coater Cefla Sorbini Smartcoater M. Year 2006 Gtedpfxsg D Uuie Ah Sjw Working width 1300mm Suitable for wet on wet, stains, primers and sealers coating application. Very good condition. Fully working. Available immediately.

Condition: excellent (used), Year of construction: 1998, I sell the roller coater Cefla Sorbini Smartcoater T/20-MF. Year 1998 Working width 1300mm Suitable for wet on wet, stains, primers and sealers coating application. Very good condition. Fully working. Gsdpfx Ajynvwyeh Sstw Available immediately.

Condition: like new (used), Through feed double end trimmer saws. 2x 3kW saw motors. Feed motor with variator. 300mm to 3100mm end trimming capacity. Suitable for use with a moulder infeed or similar. Gsdpeif N Sxjfx Ah Sstw

Condition: excellent (used), Year of construction: 2001, I sell the roller coater Cefla Sorbini Smartcoater T/20-MF. Year 2001 Working width 1300mm Gtodpfxjwink Ne Ah Sew Suitable for wet on wet, stains, primers and sealers coating application. Very good condition. Fully working. Available immediately.

Condition: used, for installation on an existing bar conveyor scope of delivery: Housing of the tube with exhaust fan and switch cabinet without cross bar conveyor - Producer Cefla - Type ECO LIGHT - Working width 1.300 mm - Number of lamp from top 1 Stk. - Lamp straight to conveyor - For mercury lamps - For gallium lamps - Mirror pivoting - Total connection power 14,61 kW - Location Gjdevun Uyopfx Ah Sotw - Voltage / HZ 400 / 50

Condition: good (used), Year of construction: 2010, Poliedra is a dryer suitable for the curing of UV lacquers on three-dimensional surfaces. In the case of spray applications, the UV dryer must also cure the product applied to the vertical edges of the panel. Superfici developed UV modules with special reflectors. The special geometry of the reflector of the "Poliedra" UV supports a uniformly UV irradiation distribution, both on the surface and on the edges. In this way, with a single lamp, inclined with respect to the direction of advancement of the pieces, Gtjdommbvtopfx Ah Sjw lamp length 1700 mm – 120 W/cm available lamp power from 40 to 120 W/cm type of lamps gallium and mercury (new lamps)

Condition: used, Year of construction: 2018, machine/vehicle number: 318113001, The machine has been partially overhauled and tested. - Manufacturer: Cefla - Model: UV-R3 - Year of manufacture: 2018 - Working width: 1300 mm - Workpiece height: ~ 3 - 70 mm - Number of top lamps: 3 pcs. - With rod conveyor - Rod spacing: 60 mm - Suitable for mercury lamps - Suitable for gallium lamps - Lamp power: max. 120 W/cm - Connected load: 56 kW / 104A - Voltage, Hz: 400 / 50 - Control cabinet integrated under the machine - Feed speed adjustable: ~ 1.25 - 21.25 m/min Gjdsx Tpx Aspfx Ah Sjtw - Length: ~ 3,500 mm - Width: ~ 2,700 mm - Height: ~ 1,600 mm - Exhaust air volume: 3,600 m³/h - Location: in stock - Voltage, Hz: 400 / 50

Condition: used, Year of construction: 1998, machine/vehicle number: 71257/1, - Producer Cefla/Sorbini - Type Ecolight - Year of construction 1998 - Working width 1,300 mm - working height 870 + - 20 mm - max. part height ~ 70 mm - Number of tubes from above 1 pc. - Tubes placed straight 1 pc. - Suitable for mercury tubes - Suitable for gallium tubes Gjdeumvp Eopfx Ah Sotw - Bar transport - Rod pitch ~ 95 mm - Feed adjustable 5 - 25 m/min - Length 1,500 mm + 500 mm - Volt,Hz 400 /50 - Total electrical connection 12.56 kW - Voltage fluctuations max. +/- 5 %

Condition: excellent (used), functionality: fully functional, Filter for extraction of dust and sawdust. Gtedpfx Aetzld Ush Ssw

Condition: used, Year of construction: 1998, - Producer Sorbini - Type T/20MF - Year of construction 1997 - Working width 1.300 mm - Maschine is overhauling, very good condition - Working height ~ 880 - 920 mm Gedpfjvupc Eox Ah Sjtw - Part height ~ 5 - 80 mm - Operating side, left - roller diameter ~ 248 mm - Metering roller ~ 174 mm - Reverse drive - Double diaphragm pump 1 Stk. - Length 950 mm - Width 2.550 mm - Height 1.540 mm - Weight ~ 1.220 kg - With switch cabinet - Voltage / HZ 400 / 50 - Location, on stock - Voltage fluctuation max. +/- 5 % THE PICTURES are not original pictures, They are only an example of a reconditioned machine

Condition: used, Year of construction: 2003, AVAILABLE from 08/2026 UV dryer, Cefla UV 2000 - Manufacturer Cefla/Sorbini - Type UV 2000 M2 / TTE2500 - Year of manufacture 2003 - Working width 1.300 mm (1.445) mm Gtedsyifwpjpfx Ah Sjw - Working height 900 + - 40 mm - Operating side right - Max. part height 70 mm - Number of tubes from above 2 pcs. - Straight tubes 2 pcs. - Suitable for mercury tubes - Suitable for gallium tubes - Tube power max. 120 W/cm - Bar transport - Length 2.500 mm - Width 2.300 mm - Height 1.500 mm - Volts, Hz 400 /50 - Total electrical connection 86 A / 36.4 kW - Voltage fluctuations max. +/- 5% Images are only examples of a machine of the same design*

Year of construction: 1969, condition: good (used), Work table Clamping surface 500 x 200 mm distance milling spindle - work table 300 mm longitudinal movement of the table by hand 300 mm transversal movement of the table by hand 160 mm template table stencil table 550 x 324 mm distance pantograph arm - clamping surface 20 mm Gsdpfx Asidckfeh Sjtw Rotatable 360 stencil grooves 7 pcs., distance 45 mm Milling spindle spindle speed 1.900 - 15.000 rpm cutting speed 1 - 226 m/min motor speed 2.800 rpm Internal taper of the graver spindle 1:5 Gr. bore of the collet 6 mm Adjustability of the spindle 1 mm fine, 3 mm coarse Pantograph Transmission ratio 1 : 1 to 1 : 50 driving power 0,2 kW Dimensions Required area L x W x H 1400 x 1000 x 1420 mm Weight 260 kg Accessories / special features: - 1 set of fonts with letters and numbers - stylus

Condition: used, Year of construction: 1997, machine/vehicle number: MR1TLL97037, - Manufacturer Cefla / Sorbini - Type T / 20-SP-1 - year of construction 1997 - Working width 1300 mm - working height 880 - 940 mm - Part height ~ 3 - 80 mm Gtsdsumvpfopfx Ah Sjw - Operating side right - Filler application cylinder ~250 mm - Hard chrome-plated metering roller 174 mm - Hard chrome-plated smoothing roller 245 mm - Reverse drive - Belt transport - Belt control - Length ~ 1640 mm - width 2590 mm - height ~ 1700 mm - Feed rate 6 - 24 m/min - Total connection 4.5 kW - Weight 2,000 kg - With switch cabinet - Volt, Hz 400 / 50 - Location, not in stock