UV line

Barberan

Condition: used, machine/vehicle number: 007650, Max working width: 450 mm Dkodpeu Evi Refx Aitsp Max. machinable height: 120 mm Gluing System: EVA Hotmelt

Condition: refurbished (used), DIFFERENT TYPE OF MOTOR AND SLIDE for CELASCHI DET SECOND-HAND, FULLY RECONDITIONED Dedpfodvlcyex Aitskp

Condition: used, machine/vehicle number: 007649, Max working width: 600 mm Dksdpfou Eviqjx Aitjp Gluing System: EVA Hotmelt

Condition: used, machine/vehicle number: 007924, Position 1: Panel Feeding and Loading BARBERAN-RFU-4-C-1700 Position 2: Brushing Machines BARBERAN-RFU-4-C-1700 Position 3: Calender BARBERAN-RFU-4-C-1700 Position 4: Gluing Machine BARBERAN-RFU-4-C-1700 Position 5: Continuous Cycle Presses BARBERAN-RFU-4-C-1700 Dkodpfx Aiowu Agcetop Position 6: Panel Stacking and Offloading BARBERAN-RFU-4-C-1700

Condition: new, Cefla painting system Djdpfxowhbrwj Aitekp

Condition: used, machine/vehicle number: 007676, Position 1: Brushing Machines BARBERAN-ECO-1700-H-SI Position 2: Gluing Machine BARBERAN-ECO-1700-H-SI Dkedpfx Aiswuzzrstop Position 3: Continuous Cycle Presses BARBERAN-ECO-1700-H-SI Position 4: Continuous Cycle Presses BARBERAN-ECO-1700-H-SI

Condition: used, Year of construction: 2001, - Manufacturer Barberan - Type BRB-1400 - year of construction 2001 - Working width 1330 mm - Working height ~ 880 - 900 mm - Part height ~ 5 - 100 mm - Operating side right - Lacquer application roller ~45 Shore - Roller diameter 245 mm - Application cylinder speed 4 - 24 m/min - Quick-change system Application roller - Hard chrome-plated metering roller 174 mm - Dosing roller Speed 4 - 24 m/min Dsdpfezf N I Ssx Aitskp - Reverse drive - Solvent-resistant conveyor belt - Double diaphragm pump - Travelling on flanged rollers without - Feed adjustable via frequency converter 5 - 25 m/min - Length: 980mm - Width: 2.800mm - Weight 1,680 kg - Volt, Hz 400 / 50 - Location, in stock - Machine has been overhauled in 2022

Condition: good (used), Year of construction: 1969, Work table Clamping area 500 x 200 mm Distance between milling spindle and work table 300 mm Longitudinal movement of the table, manual 300 mm Transverse movement of the table, manual 160 mm Template table Template table 550 x 324 mm Distance between pantograph arm and clamping area 20 mm Rotatable 360° Template slots 7 pcs., spacing 45 mm Milling spindle Spindle speeds 1,900 – 15,000 rpm Cutting speed 1 – 226 m/min Motor speed 2,800 rpm Internal taper of the tool spindle 1:5 Size of the collet bore 6 mm Adjustability of the spindle 1 mm fine, 3 mm coarse Pantograph Transmission ratio 1:1 to 1:50 Drive power 0.2 kW Dimensions Footprint L x W x H 1400 x 1000 x 1420 mm Weight 260 kg Accessories / Special features: • 1 set of templates with letters and numbers • Stylus Dksdpfx Aeidckfoitsp

Condition: used, No. 3198 Machine package painting & surface treatment BUETFERING, HEESEMANN, Barberan Used Consisting of: - Wide belt sanding machine BUETFERING Classic 313 - QCE - UV lacquer roller Barberan BRB - 1400 - Drying channel Barberan HOK - 14/2 - Lacquer sanding machine HEESEMANN FGA 8 - Suction unit Schuko Vacomat S/N 25/45 Technical data: - Wide belt sanding machine BUETFERING Classic 313 - QCE Used, year of construction 2000 Sanding width 1350 mm Sanding belt width cross belt 150 mm Sanding belt length cross belt 4700 mm Sanding belt width wide belt 1370 mm Sanding belt length wide belt 1900 mm Workpiece thickness 3 - 150 mm Feed infinitely variable 2.5 - 13 m/min Power cross belt 15 kW 1st wide belt 12.5/16 kW 2nd wide belt 11 kW Total connection 49 kW Sanding of veneered workpieces with the cross sanding unit and the link pressure beam in one or two passes Precise calibration with the contact roller of the 2nd unit Sanding solid wood: 1st pass with the contact roller / 2nd pass with the cross sanding unit and the link pressure beam Weight of the machine 4500 kg - UV lacquer roller Barberan BRB - 1400 Used, year of construction 2006 For application of primer and top coat - Drying channel Barberan HOK - 14/2 Used, year of construction 2006 With half pressure lamp made of mercury or gallium, with an output of 80 W/cm or 120 W/cm Elliptical point reflector, air cooled, made of aluminum Air cooling system for each lamp or reflector - Lacquer sanding machine HEESEMANN FGA 8 Used, year of construction 1994 Multi-purpose surface sanding machine 1 sanding belt, oscillating Sanding belt width 1350 mm Drive 11 kW Workpiece height max. 140 mm Sanding belt dimensions 2620 x 1350 mm LW - Suction unit Schuko Vacomat S/N 25/45 Used, year of construction 2000 Filter area 45 m2 Sale on behalf of the customer, ex location near 86156 Augsburg, without dismantling, without transport and assembly Dismantling, loading and transport by us optionally possible Errors in the description and price excepted To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Dkjdsvxrynjpfx Aitsp Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: ready for operation (used), Year of construction: 2008, total width: 1,350 mm, total height: 2,100 mm, overall weight: 2,200 kg, product length (max.): 7,000 mm, Laminating press manufactured in 2008. This Barberan PUR 46 L features a total power of 45.5 kW and operates at a voltage of 400 V. The machine dimensions are approximately 7000 × 1350 × 2100 mm, with a weight of around 2200 kg. If you are looking to get high-quality laminating capabilities, consider the Barberan PUR 46 L machine we have for sale. Contact us for further details regarding this machine. • Total power: 45.5 kW • Power supply voltage: 400 V Dedoyz Tgmjpfx Aitjkp • Operating voltage: 110 V • Current type: AC • Frequency: 50 Hz • Motor protection: IP55 • Air pressure: 6 bar • Air consumption (primer): 100 NL/min • Air consumption: 40 NL/min • Extraction diameter: Ø100 mm • Air flow rate: 700 m³/h Additional equipment • Pre-melter: approx. 200 kg; dimensions approx. 1050 × 820 × 1830 mm • Flame treatment unit with ozone filter: approx. 500 kg

Condition: like new (used), Year of construction: 2017, Barely used UV line for panels or flooring Dkedpfxsv Ux R Sj Aitep

Condition: used, Complete factory for the production of furniture cabinets, composed by: SZ0M23) Angular Panel Saw "GIBEN" Tip 17 (mm 5600x2700) with "SIRIO" automatic unloading and stacking system SZ0M25) Panel Saw “GIBEN” Mod. GammaDue (mm 3800x2200) SZ0M26) Panel Saw (Multi-saws) “GABBIANI” (finished panels mm 4250x2120) SZ0M27) Laminating Line “BARBERAN” for melamine papers (glue on paper) SZ0M29) Pressing Line “COLOMBO REMO” (mm 1400 x 9600) for paper / veneer / laminates SZ0M30) Pressing Line “FRIZ” (mm 1400 x 6200) for paper / veneer / laminates SZ0M41) 4-sides Sizing & Edge Banding Line “IMA” Combima fast handling “RBO-BIESSE” SZ0M42) 4-sides Sizing & Edge Banding Line “IMA” Combima softforming with a second double side Sizing & banding machine STEFANI and automatic handling equipment “TOMASSINI” SZ0M39-40) Edge Banding Line (single side) for narrow pieces “HOMAG” Mod. KAL 310 with Splitter "NARDELLO" Mod. Elegance SZ0M35-36) Multi-Borer “BIESSE” Techno Logic with Loader + Unloader “TOMASSINI” SZ0M45) CNC Multi Boring and Dowels Inserting Line “BIESSE” Techno FDT with fast handling “RBO-BIESSE” SZ0M37) CNC Working Center “MORBIDELLI” Mod. Author 600 KL Dkjdjcr U Urspfx Aitjp SZ0M56) Reel Cutting and winding machine “CEFLA-DUSPOHL” Tipo RSW 2200 T SZ0M01) Wooden strips end-cutting Line "OGAM+SALVADOR" SZ0M07) Wooden strips end-cutting and stacking Line “SALVADOR+SACOT” SZ0M08) Wooden strips end-cutting and stacking Line “SALVADOR+CMA” SZ0M11-17) Preparing Line for honey-comb panels SZ0M18) No. 6 Mutli-openings (daylights) hot hydraulic presses "COLOMBO REMO" SZ0M21) Sizing and top & bottom Calibrating line for honey-comb panels "GABBIANI + CELASCHI + ELMAG + COSTA Sanding Machines" And many other machines (i.e. multi-borer "VITAP", circular saws, glue spreaders, etc.), saw-dust suction system, rollers ways, shelvings, fork-lift, transpallets, etc. Machines still installed at the end-user's factory. They can be inspected by appointment.

Year of construction: 2025, condition: ready for operation (used), This Barberan WM-33 was manufactured in 2025. A profile wrapping machine designed for versatility, it handles various materials including PVC and aluminum. It supports a wide range of foil types and utilizes PUR hot melt adhesives. Key features include a max mechanical speed of 60 m/min, profile dimensions up to 300 mm wide and 120 mm high, and a total machine length of 6000 mm. Contact us for more information about this machine. Additional equipment • Machine bed, slot nozzle head, mounts for wrapping tools • Complete tool set for PVC/Aluminum profiles • Operator safety system and control cabinet • Set of nozzles for profile cleaning Dodpeyaa Utsfx Aitskp • Protective foil unwinder and hot air turbines • Infrared screen with lamps and tool cassette Machine Benefits Qualitative Machine Benefits • Machine entry section with heavy-duty steel frame • Transport rollers with motor-driven frequency converter • Integrated control cabinet • Emergency safety systems • Glue unit safety mesh • Operator control panel for adhesive management • Two 15 mm wide rollers per shaft, 240 mm diameter • Quick positioning in 5 mm steps • Air blowers & ionization for static and dust removal • Automatic primer station with precise application Technical Machine Benefits • The profile wrapping machine is designed to wrap profiles of various shapes, sizes, and materials using different foils with hot melt adhesives. • Operates as a standalone unit or part of a complete production line. • Capable of working with materials such as pvc, aluminum, and some composites. • Various foil types are compatible, special configurations may be needed for certain materials. • Profile dimensions: width 25–300 mm, length ≥600 mm, height 4–120 mm • Foil dimensions: width 25–330 mm, outer roll diameter ≤600 mm, inner roll diameter 76 mm • Max mechanical speed: 60 m/min • Working height: 900 mm • Voltage: 400v – 50hz • Compressed air: 6 bar Extra Information Machine still under power. 6 self-regulating heaters, expandable to 8. Slot Nozzle Head (330 mm) for adhesive application. Roll diameter up to 600 mm. Magnetic powder brake for tension control. Infrared screen for foil heating. Foil applied with shaped rubber rollers. Quick profile shape change system. For foil rolls up to 600 mm diameter. Height-adjustable for pressure control. The system is versatile with components designed to enhance processing efficiency and adaptability for various production needs. Dimensions Machine Depth 6000 mm

Condition: new, Volumes: available in 10 m³ or 20 m³ versions Dedpew Hfzaefx Aitokp Product description: The Easyplan is a compact yet powerful drying system designed for drying softwood and hardwood, as well as for treating pallets and wood packaging to comply with ISPM-15 standards. It ensures complete phytosanitary compliance and consistently delivers high-quality drying results for a wide range of timber types. Installation takes less than one day, making it ideal for rapid deployment in small to medium-sized production facilities. The process is fully automatic – simply load the kiln and let the system manage the entire drying or heat treatment cycle. Available heating options: Electric: 27 and 36 kW Gas: 200 kW gas burner Hot water/steam Wood stack size for EASYPLAN 10 and EASYPLAN 20: 4 m - 6 m 180 - 300 EPAL pallets Key benefits: Capacities of 10 m³ or 20 m³ to suit different production requirements Suitable for both softwoods and hardwoods ISPM-15 compliant pallet and wood packaging treatment, firewood drying Fully automatic drying process Quick installation in less than 24 hours Flexible heating options to match available energy sources

Year of construction: 2007, condition: ready for operation (used), Barberan machine manufactured in 2007. This Barberan PUR-33-L is a continuous wrapping line designed for applying PVC foil, CPL, paper, and veneer on various materials using hot-melt technology. It features a robust one-piece electro-welded steel frame, motorized rubber-coated feed wheels, and a slot die extrusion system for precise glue application. If you are looking to get high-quality wrapping capabilities, consider the Barberan PUR-33-L machine we have for sale. Contact us for further details. Djdpfoym U Diex Aitokp • Base Frame: One-piece electro-welded steel frame with high structural rigidity. It is designed to absorb vibrations and maintain pressure roller alignment. • Transport System: Motorized rubber-coated feed wheels with speed controlled via inverter, ensuring precise synchronization between glue application and profile feed. • Pressing / Calendering Zone: Universal supports and multiple pressure rollers with various shapes and hardness levels, suitable for complex profile geometries. • System Type: Slot die extrusion system with adjustable lips. • Working Width: 330 mm. • Glue Application Accuracy: Constant gram-per-square-meter distribution, independent from line speed. Closed system reduces oxidation, prevents premature PUR crosslinking, and minimizes material waste. • Adjustment: Micrometric lip adjustment for precise control of glue film thickness. • Type: 20 kg PUR drum melter with heated platen, where only the top layer is melted to preserve the chemical integrity of the remaining adhesive. • Sealing System: Airtight design with dedicated seals to prevent air/moisture ingress. • Pump: Integrated gear pump providing constant, pulsation-free adhesive flow to application head. • Function: Maintains adhesive working temperature between approximately 120–150 °C during transfer from melter to slot die head. • Length: 4.5 meters. • Technical Features: Internal core made of PTFE (Teflon), high pressure, and PUR-resistant. It includes a uniform electric heating element to prevent cold spots, high-efficiency thermal insulation, an integrated thermocouple, and temperature control via machine PLC.