Complete sawmill (stationary)

Artiglio 1100 / EO 700

Condition: new, Year of construction: 2025, functionality: fully functional, Professional WoodMizer LT70 sawmill, complete configuration, still packaged. The machine was delivered in April 2025 and has never been used. It was assembled by the manufacturer and is ready for operation. Dcjdpfx Aoyr I Dmjanjk

Condition: ready for operation (used), operating hours: 350 h, machine/vehicle number: LT70HE25SRAHSH4-SR2SWR, Brand: Wood-Mizer Model: LT70HE25SRAHSH4-SR2SWR 22 kW electric motor Djdjzln S Nepfx Aaneck 6.1 m saw length SW10 setworks LMS Operator station Inclined conveyor with board return Chain turner, 3 vertical side supports, central clamp on 2 shafts, 2 motorized rollers with dual cylinders, 2 clamps, absorption roller Band wheels for 50 mm wide blades Debarker Laser sight Leg set for raised frame ("H") Log deck, 2 chains, 6 x 1.66 m

Condition: used, Year of construction: 2010, functionality: fully functional, type of input current: three-phase, cutting length (max.): 12,000 mm, cutting width (max.): 640 mm, saw drive: 15,000 W, input voltage: 400 V, wheel diameter: 600 mm, – Year of manufacture: 2010 TECHNICAL SPECIFICATIONS: – Motor: 15 kW Cutting dimensions: – max. log diameter: 95 cm – clearance between rollers: 73 cm – max. cutting width (square timber): 64 cm – max. cutting height above saw blade: 39 cm – max. cutting length: 12 m Saw head equipment: – automatic cutting thickness adjustment device – electric head height adjustment: up/down – electric forward/reverse head feed: infinitely variable feed speed – electric saw blade guide arm – hydraulic sawblade tension system with air cushion – debarking unit Sawblade: – length: 4670 mm – width: 38 mm - 50 mm – sawblade guide wheels diameter: 600 mm – belt type: Z – material: cast iron The sawmill is equipped with full hydraulics: – hydraulic leveling system – side stops – material clamp – comb-type log turner – 3 loading arms Machine dimensions: – length: 1520 cm – width: 235 cm Dcjdpoy Na Hvsfx Aanjk – height: 240 cm

Condition: new, Year of construction: 2026, Engine Electric 30 kW Electric 37 kW Electric 45 kW Cutting dimensions Max. log diameter 105 cm Max. log length 4.5 m (Bed S) 8.4 m (Bed L) Up to 12 m (non-standard) Clearance between rollers 90 cm Max. cutting width (cant) 85 cm Headstock equipment Automatic cutting thickness adjustment device (Setworks) Industrial PLC controller with automatic mode Headstock up/down feed Electric (Servo) Headstock forward/backward feed Electric Saw blade guide arm Electric (joystick controlled) Saw blade cleaning system Automatic oil mist lubrication with pneumatic assistance Saw blade tensioning system Electric hydraulic with pressure accumulator Debarker Optional Chip outlet diameter 150 mm (6") Headstock features Four cameras Board discharge system Additional options Laser Saw blade Length 6270 mm Width 50 mm 75 mm (Standard) 100 mm 120 mm Saw blade guide wheels Diameter 800 mm Type Beltless Material Convex cast iron Bed equipment Bed structure Dual-sided headstock guide system Bed features Board conveyor belt Shock-absorbing roller Additional options Dodpfxszqz T Ro Aansck Saw-following conveyor Log maneuvering kit Industrial hydraulics 1 or more log clamps on two rods 1 or more bidirectional chain turners 2 or more driven leveling rollers 2 or more stops 7.5 kW or 11 kW hydraulic unit

Condition: reconditioned (used), Year of construction: 2022, operating hours: 1,025 h, functionality: fully functional, machine/vehicle number: LT70LG57SDH15-3.0AC, cutting length (max.): 8,400 mm, overall weight: 3,000 kg, height adjustment type: electric, tooth pitch: 22 mm, saw band length: 4,670 mm, saw band width: 38 mm, input current: 16 A, Equipment: chassis, LT70 mobile sawmill – built in 2022 – top-of-the-range equipment – 57 hp – 1-year warranty A very well-equipped mobile sawmill (built in 2022) with approx. 1,025 operating hours is for sale. The machine is in good condition and ready for immediate use. Thanks to its extensive range of features, it is ideal for professional users, contract sawmills or larger wood processors. Technical data & features: - 57 hp petrol engine - up to 95 cm Ø - AccuSET II cutting thickness calculator Dsdpfx Aaeypiz Usneck - Cutting length 8.4 m (optionally extendable) - Electric feed & height adjustment - Pre-cutter - LubeMizer belt lubrication system - Radio remote control - Hydraulic package 15 log turner, centre clamp, 4 pull-down clamps, 3 compensation rollers, 1 of which is driven, loading arm) - 3.0 t double axle - Year of manufacture: 2022 - Approx. 1,025 operating hours - 1 year warranty Item number: 25-G04 / LT70LG57SDH15-3.0AC

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: 001, cutting length (max.): 5,000 mm, Offered is an automatic edge trimming line with singulation, trimmer for cross-cutting, 2 stacking machines, additional discharge, and trimming of stacking slats: Boards 2000-5280 mm long, 16 - 40 mm thick, 70 - 260 mm wide, cycle rate of 29 or 58 pieces/minute, operated by one person sitting at the joystick: - Cross-transfer of boards with a 4-strand chain cross conveyor - Singulation inclined conveyor 6000 mm wide, 3000 mm at an angle Dedpfxoy Uzhfo Aanjck - Alignment roller conveyor - Chain cross conveyor as a layer former - Star turners and sorters before the trimmer - Edge detection (ALFHA edger) - Trimmer with 11 saws in a 50.5 cm grid: The operator (sitting) at the joystick evaluates: without re-trimming, 5000 mm to stacking machine 1, alternatively: without re-trimming, 4000 mm to stacking machine 1 with re-trimming, 4000 mm to stacking machine 2 with re-trimming, 3000 mm to stacking machine 2 with re-trimming, short lengths for discharge into a box with re-trimming, short lengths for discharge into a box with re-trimming, 2 or 3 x 101 cm for stacking slats with re-trimming, 2 or 3 x 101 cm for stacking slats or waste cut - cut length 505 mm for the underlying vibration trough - 2 stacking machines: 1 x 2500 to 5280 mm and 1 x 2000 to 4280 mm - Automatic lowering of finished packages and transfer to automatic strapping - FROMM strapping with 16 mm plastic band and automatic transfer to the discharge roller conveyor - ALFHA control system with Siemens S 7 - ensures perfect operation. Performance records/daily logs - Control cabinets with Siemens components, SEW motors, Telco light barriers For example, one employee, processing side boards of 4000/17 x 76 mm, produced, packaged, and strapped approximately 15,000 boards in 9 hours. The system is still assembled, but the upstream chipper has already been dismantled. Therefore, the system is immediately available. It is very robustly built and has always operated smoothly and without any problems. We can provide a process video via WhatsApp!

Condition: new, Year of construction: 2026, Electric Motor 22 kW Cutting Dimensions Max. log diameter 105 cm Max. log length 6.1 m 7.9 m (with BX6 bed extension) 9.7 m (with BX12 bed extension) Min. log length 1.8 m Clearance between rollers 84 cm Max. cutting width (cant) 78 cm Max. cutting height above the blade 34 cm Max. width of clamped material 66 cm Min. width of clamped material 5 cm Max. log weight 2.5 t Head Equipment Automatic thickness setting device (Setworks) Industrial PLC controller Head feed up/down Electric (Servo) Head feed forward/backward Electric Blade guide arm Electric (joystick controlled) Blade cleaning system LubeMizer Blade tensioning system Hydraulic with air cushion Debarker Optional Chip outlet diameter 150 mm (6") Head Features Board discharge system Laser Blade Length 5000 mm Width 38 mm 50 mm (Optional) Blade guide wheels Djdpfxozqz Sgj Aaneck Diameter 600 mm Type With flange-pressed and brush belt Material Cast iron Bed Equipment Bed construction Single-sided head guide system Cribbing beds Standard Bed extension BX6 bed extension: 1.8 m BX12 bed extension: 3.6 m Bed Features Board conveyor belt Shock-absorbing roller Log maneuvering kit Industrial hydraulics Center clamp with two bars 2 double-sided clamping devices (optional) 2 two-way chain log turners 2 driven leveling rollers 3 stoppers on two bars 7.5 kW hydraulic unit

Condition: new, Year of construction: 2025, EG300EH25S-EMR Main motor power 18.5 kW 5 circular saw blades (4 fixed and 1 movable), Setworks device for automatic setting of cutting parameters Set of two lasers Set of 5 circular saw blades Adjustable feed speed 0-25 m/min 4 driven rollers Infeed/outfeed table Dedpfxeyynq Re Aansck Roller conveyors Saw blade diameter: 350mm Min. board length: 700mm Max. board thickness: 60mm Min. board thickness: 16mm Max. board width: 550mm Max. cutting width: 420mm Min. cutting width: 20mm Chip box

Condition: used, power: 18.5 kW (25.15 HP), input voltage: 400 V, cutting height (max.): 320 mm, cutting width (max.): 300 mm, total length: 1,000 mm, overall weight: 3,100 kg, table height: 1,250 mm, Slitter-Rewinder equipped with hydraulic drive, self-centering option roller diameter: 915 mm Dcjdpfszh Dz Eox Aanjk saw width: 100 mm variable speed from 10 to 60 m/min.

Condition: excellent (used), Year of construction: 2021, operating hours: 370 h, functionality: fully functional, For sale is a complete sawmill line from Woodmizer, consisting of: LT70 Remote, EG800, HR700, 3-log handling table, 6 cross conveyors, log loading system, and more. The sawmill line is fully functional. Customer service has been recently updated. The line is still in operation and can be inspected at any time. The price includes approximately 100 saw blades (value approx. €3000) for LT70/HR700 and 11 saw blades for EG800 (value approx. €1400). Currently, the HR700 is not in use and is stored. The HR700 is fully functional and has only 30 operating hours. An alternative configuration of the line with the HR700 can be seen in the last picture. If interested, the sawmill line can also be sold with ongoing operations (approx. 500-1000 m3 of sawn timber/year). Dcodpoyz Ia Isfx Aanek If you have any questions, please do not hesitate to contact me.