Laboratory batch Extrusion line

ALPHATEC AE-S 25-30 Strang

Year of construction: 2022, operating hours: 400 h, condition: as good as new (ex-display), functionality: fully functional, !!!Demonstration machine with low operating hours!!! Model: Lepton 5100 Year of manufacture: 2022 Operating hours: approx. 400 hrs Location: D 84069 Schierling Availability: short notice Hnsdpfsrt Uvzex Abier Equipment: - Base machine Lepton 5100 with screen decks 1 and 2 Screen deck 1 mesh size: 36 mm Screen deck 2 mesh size: 24 mm - Pre-screen deck with large hopper and variable dosing roller - Volume measurement via load - Prepared for air separator - Compressor - LED lighting package - Radio remote control for all key settings - Diesel-electric drive 80 kW - Axle levelling system - Tandem axle, road approval for 80 km/h - 19,000 kg total weight - Transport dimensions: 11.97 m total length, 3.98 m height, 2.53 m width, no special transport permit required Possible screening materials: Compost, green waste, biomass, root wood, waste wood, municipal waste, RDF, various recyclables (not suitable for construction rubble or excavated material) Miscellaneous: Very good used condition, fully operational

Condition: excellent (used), Year of construction: 2016, operating hours: 500 h, functionality: fully functional, System: Decanter centrifuge as a mobile, fully equipped dewatering unit housed in a container Condition: Used/demo machine, only 500 operating hours Type: Flottweg Z3E-4/451 Year of manufacture: 2018 Max. bowl speed: 5250 rpm Standard wear protection: 8° cone Differential: 1.5–29 min-1 Torque: 2750 Nm System: The "all-purpose" Flottweg Z3E-4/451 is a high-performance two-phase decanter, designed for the separation of solids and liquids. ROBUST DESIGN for separating various types of sludge, such as manure, digestate, industrial sludge, wastewater treatment plant sludge and more. Hsdpfoy Avtfox Abienr

Year of construction: 1981, condition: refurbished (used), functionality: fully functional, Previous application: Production of TPE films up to 6 mm thick. Many other polymers possible. The plant has been in operation until now and can be inspected at any time in Nuremberg. The line consists of: Kuhne K45-24D single-screw extruder Screw diameter: 48 mm Process length: 24D Drive power: Heating capacity: 6.0 kW Net weight: 1150 kg Wide slit nozzle: Foils up to max. 330 mm width Calender Gross roller width: 1200 mm Hodju Ttf Nspfx Abienr Net roller width: 1100 mm (max. film width) Take-off device and impact shears

Year of construction: 2016, condition: repair required (used), functionality: not functional, HS 800 basic package Spiral shaft screen deck AA209-150 Special paint finish: Green Hnedpjvm Uqrsfx Abijr

Year of construction: 2011, condition: good (used), Plant: PEMO pump, sludge pump, chamber filter press feeding pump Type: S-ATMAO/AB/DCB75 Series: AO/AB Year of construction: 2011 HP: 22/50 Engine: Cantoni Power: 37kW Speed: 2951 rpm Machine number: 3102 Dimensions: L 1200mm Hnsdpfx Asi Ezhbobier Application: Designed for very abrasive and/or acidic slurry applications. Delivery volume: from 1 to 1500 m3/h / depending on the medium

Year of construction: 1991, operating hours: 102,364 h, condition: good (used), This extrusion line from Hans Weber GmbH is in machine storage at Plastima Used Machinery. The line is from 1991 and is in used but good condition. - Brand: Hans Weber GmbH - Model: WEBER DS 6.5 - Year of construction: 1991 - Screw Ø: 65 mm - Working hours: 102.364 Hodpfoqpft Isx Abijnr

Condition: good (used), Single Screw Screw diameter 25 mm Hodjvri Ddjpfx Abionr Dimensions (LxWxH) 1860 x 900 x 1850 mm Options • Including haul-off • Including cooling bath

Condition: good (used), Manufacturer: Plastik-Maschinenbau GmbH (PM) Model: PM Wiska 30-25 D Serial No.: M0793 Made in: West Germany (Kelberg / Eifel) Type: Single-screw plastic extruder Documentation: Included (original German manual and correspondence from 1987) Condition: Used, but complete and fully functional Location: Ivanka pri Nitre, Slovakia Technical Details (approximate) Screw diameter: 30 mm L/D ratio: 25 D Main drive motor: Lenze GFOT 100-24 (440 V / 26 A / 2 kW / 3000 rpm) Power supply: 3 × 380–420 V / 50 Hz Control voltage: 220 V Cooling system: Air-cooled barrel with heating zones Control cabinet: Included, equipped with relays, circuit breakers, and analog meters Description Hnedpfxsxu E E So Abijr Compact single-screw extruder for laboratory or small-scale production, manufactured by Plastik-Maschinenbau GmbH in West Germany. Designed for processing thermoplastics, material testing, or small extrusion lines (e.g., tubing, profiles, or coating applications). Supplied with the original electrical cabinet, pressure gauge, and documentation. Mechanically and electrically complete; ready for standard commissioning.

Year of construction: 1970, condition: ready for operation (used), A complete extrusion line with a Reifenhäuser extruder and a gravimetric system Plast-Control (2006) is available. 1) Unwinder 1. 2) Primer unit and hotmelt unit for water-based adhesive lamination. 3) Dryer. 4) Unwinder 2. 5) Dolci extruder for extrusion lamination. 6) Unwinder 3. 7) Two printing units with additional dryer. 8) Extruder Reifenhäuser. 9) Rewinder. 10) Guide roller in the basement. 11) Web guiding under unwinder 1 in the basement. 12) 2x resin silos in the basement. This is a complete extrusion line with peripheral equipment. Documentation available. An on-site inspection is possible. Hodpfsw R Dhrjx Abijnr

Year of construction: 1988, condition: used, functionality: fully functional, Year: 1988 Material: LDPE/HDPE Winder width: 1100 mm, double winder Die diameter: 150, 100, 80, 50 Screw diameter: 60 Additional equipment: corona treatment + gravimetric system Hnjdpfx Ajzi Urwsbisr Maximum machine capacity: 90 kg The machine is in very good condition and can be seen in operation!