Condition: good (used), Conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor, flat belt conveyor -Conveyor belt: Transport belt, belt conveyor -Total conveyor belt width: 250 mm / 2 x 100 mm belt width -Conveyor length: 1330 mm -Drive shaft: Ø 30 x 100 mm -Transport dimensions: 1355/560/H225 mm Ibelhcexxh Rfedwzsd -Weight: 87 kg

Condition: used, Refurbished granulator, heavy-duty series, hard-faced Can be used for dry and wet shredding Typical applications: Plastic hollow bodies, secondary shredding of pre-shredded waste, Rotor 800 mm diameter x 1600 mm width Ibelhcdoxxky Aswzed Open F7 rotor with replaceable blade supports Drive power 160-250 kw With forced feeding by 3 load-dependent controlled feed screws Hydraulically hinged, hydraulically swiveling screen basket Throughput capacity up to 5 t/h depending on material and grain size

Condition: excellent (used), Gruse Capricorn Type: ELD 1-16-1 SO Gruse lift table ELD 1-16-1 Lift heavy loads easily Scissor lift table: Lift table with double scissors Lift table ELD Type explanation: Type designation ELD Load capacity 1000 kg Overall height 350 mm Effective stroke 1600 mm Final height 1950 mm Table top 1250 x 800 mm Lower frame 1250 x 750 mm Lifting time approx. 21 sec. Power 2.3 kW Ibelsrhkimohcdwzjd Weight approx. 600 kg Condition: used Scope of delivery: (see picture) (We reserve the right to make changes and errors in the technical data!) We will be happy to answer any further questions you may have on the phone.

Condition: good (used), Year of construction: 2007, -6Pcs. Spaleck Feeders . Type: SFLU 1950-300x3000 . L X W: 3.000 x 1.950mm. . Year of Manufacture: 2007 . With 2 Pcs. Friedrich Unbalance motors of 2KW each, Springs and Frame with rubber springs. Feeders can be sandblasted and painted . Ibjloxwn H Dohcdwzod

Condition: used, Vibratory Bowl Feeder / Sorting Device / Bowl Feeder / Vibratory Feeder by RNA Vibratory bowl, sorting device / screw feeding unit with vibratory feeder for screwdriving technology Feeding system, feed unit Manufacturer: RNA Rhein-Nadel Automation GmbH Model: SRC-B200-2R Year of manufacture: approx. 2000 Bowl diameter (top): 200 mm Bowl diameter (bottom): 130 mm Iolhcoxw Rdlsdwzebd Bowl internal height: approx. 25 mm Sorting track width: approx. 3 mm Total height (drive + bowl with sorting track): 225 mm Control voltage: 24 Volt DC (external power supply required) Mains connection: 230 Volt, 50 Hz - An external 24 VDC power supply is required for start/stop signals (the controller does not have an internal 24 VDC power supply). - Control unit REO type Reovib R6 / 439 for adjustable vibration speed - The feeder was used for supplying automotive blade fuses - Mounted on an aluminum profile stand Space requirement Ø x H: 240 x 250 mm Weight: 17 kg Good condition A bowl feeder always consists of two essential components. 1) Sorting bowl, in which the parts are oriented 2) Drive unit, which generates vibrations in the sorting bowl via mechanical oscillations, thereby moving the parts.

Condition: good (used), Conveyor rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrying rollers -Conveyor belt rollers: Transport rollers -Roller diameter: 108 mm -Transport width: 1280 mm -Shaft: Mounting Ø20 x 65/10 mm M12 -Quantity: 150x transport rollers available Islhcdolug Shewzsbd -Price: per piece -Overall dimensions: Ø 108 x 1355 mm -Weight: 14.9 kg/piece

Condition: used, Refurbished granulator, heavy-duty series, hard-faced Can be used for dry and wet shredding Typical applications: Plastic hollow bodies, secondary shredding of pre-shredded waste, Rotor 800 mm diameter x 1600 mm width Open F7 rotor with replaceable blade supports Ibelhoxxkuyscdwzod Drive power 160-250 kw With forced feeding by 3 load-dependent controlled feed screws Hydraulically hinged, hydraulically swiveling screen basket Throughput capacity up to 5 t/h depending on material and grain size

Condition: excellent (used), AdBlue refueling truck Type: HT-Mobilus 200 AdBlue Whether in the automotive industry or directly in vehicle operation: Iolhcdwjrp Enmjzebd with the MOBILUS-AdBlue, the safe refueling of your vehicles is possible in a safe and economically efficient manner. The MOBILUS AdBlue mobile refueling system complies with all relevant technical and legal regulations and is therefore often used in research and development projects. Convince yourself of the quality of this mobile urea refueling device. Technical data: Manufacturer: Rietbergwerke GmbH & C0. KG Type: HT-Mobilus 200 AdBlue Year of construction 2018 Technical data: Dimensions L x W x H: 142 x 73 x 135cm Empty weight: approx. 260kg Useful volume tank: approx. 175 liters Power supply: Connected load: 3.0KW Supply voltage: 400/230V / 50 HZ NPE Fuse protection: 16A Heating: Connected load: 4.0KW Supply voltage: 400V Delivery pump: Output: 0.75KW Supply voltage: 400V / 50 HZ Further technical data: Suction and circulation pump: Power: 0.4KW Supply voltage: 230V / 50 HZ Dispensing valve: Volume flow: max. 40l/min Operating pressure: 0.5 - 3.5 bar Control range: Volume flow: 3.5 l/min. - 45.0 l/min Temperature: 15°C - 45°C Frequency converter: 1,800 1/min BNC sockets: Output: 0 - 10V Operating temperature Operating temperature: max. 45°C Storage temperature: down to -30°C Materials Container: LDPE All other components in contact with the product: LDPE or stainless steel Transport trolley: Steel, powder-coated Seals / hoses: EPDM Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data and specifications) We will be happy to answer any further questions you may have on the phone.

Condition: good (used), roller conveyor, conveyor track, roller conveyor belt, roller conveyor, pallet roller conveyor -Roller conveyor: 45 sections, 39 x 2.39 m / 6 x 2.79 m -Brake roller: Distance every approx. 1.3 m -Total length: approx. 110 m -Roll width: 855 mm -Rollers: Ø 60 mm -Roller spacing: 150 mm, see photos -Dimensions: 2390/955/H90 mm / 2790/955/H90 mm -Price/Delivery: complete Ijlhcdev I Rc Tewzobd -Base: various heights in stock, see ID 35351 to 35358 -Transport dimensions: mm (4 pallets) -Total weight: 3357 kg

Condition: excellent (used), Gruse Type: ELD 1-16-1 Gruse lift table ELD 1-16-1 Lift heavy loads easily Scissor lift table: Lift table with double scissors Lift table ELD Type explanation: Type designation ELD Load capacity 500 kg Overall height 350 mm Effective stroke 1600 mm Final height 1950 mm Table top 1250 x 800 mm Ibelhcorgpc Tjdwzed Lower frame 1250 x 750 mm Lifting time approx. 21 sec. Power 2.3 kW Weight approx. 600 kg Condition: used Scope of delivery: (see picture) (We reserve the right to make changes and errors in the technical data!) We will be happy to answer any further questions you may have on the phone.

Condition: good (used), Linear bearing, linear rail, linear guide, roller guide rail, guide carriage, guide rail, roller carriage, electric carriage, linear carriage -Manufacturer: Afag, linear slide electric slide -Type: ES30-300 Ielhcdsxw Ub Uewzsbd -Stroke: 300 mm -Shaft: Ø 20 mm -Dimensions: 525/60/120 mm -Weight: 5.8 kg

Condition: good (used), Linear bearing, linear rail, linear guide, roller guide rail, guide carriage, guide rail, roller carriage, electric carriage, linear carriage Ielhcdexw Ubbewzobd -Manufacturer: Afag, linear slide electric slide -Type: ES30-400 -Stroke_ 400 mm -Shaft: Ø 20 mm -Dimensions: 630/60/120 mm -Weight: 6.6 kg

Condition: good (used), Servo motor, electric motor, DC motor, stepper motor, compact asynchronous motor -Manufacturer: SEW Eurodrive, DC geared motor type ECG-A2M-09-A-K0 -Voltage: 24V -Translation: 9 -Shaft: Ø 16 x 25 mm -Technical data: see photo of the nameplate -Quantity: 10x motors available Ibelhcjxw Tvwsdwzjd -Price: per piece -Dimensions: 230/50/H50 mm -Weight: 1.3 kg/pc.

Year of construction: 2000, condition: good (used), Metering rotary valve, rotary valve, metering valve, rotary valve for screw conveyor, transport screw, screw conveyor, conveying technology, pipe screw conveyor Rotary valve. Type JK-S without 6 wings, with drive -Speed: 20 rpm -Drive motor: KEB 0.37 kW -Inlet/outlet opening: 225 x 215 mm -Dimensions: 650/350/H305 mm Islhcowq I Tgodwzebd -Weight: 45 kg

Condition: good (used), Linear drive, linear gearbox, lifting gearbox, spindle drive, pneumatic drive, slide, guide, electromechanical linear axis, mini slide, mini slide -Manufacturer: Festo: Mini slide type DGSL-12-50-Y3A 543979 -Stroke: 50 mm -Number: 15 sleds available -Price: per piece -Dimensions: 185/60/H45 mm Islsxw Tc Rehcdwzobd -Weight: 0.9 kg

Condition: good (used), Fan, ventilator, electric motor, blower, emergency ventilation fan, flue gas fan, axial fan, axial ventilator, axial fan, suction fan, diagonal fan, duct fan, diagonal fan -Manufacturer: Maico, axial fan, tube fan, diagonal fan -Type: EDR 71-0080.0665 -Power: 3.74 kW -Conveying volume: approx. 23140 m³/h -Quantity: 3 pieces available -Price per piece -Dimensions: 730/720/H720 mm -Weight: 48 kg/piece Ijlhcdsrxgv Njwzsbd

Condition: good (used), Pneumatic cylinder, air cylinder, pneumatic piston, air piston -Manufacturer: Festo, standard cylinder type DSBC-40-20-PPVA 2123166 -Stroke travel: 20 mm -Piston: Ø 40 mm -Piston rod: Ø 16 mm / M12 -Max. pressure: 12 bar -Number: 16 cylinders available -Price: per piece Ibjljxwvp Tohcdwzed -Dimensions: 180/55/H55 mm -Weight: 2.6 kg/pc.

Condition: good (used), Pneumatic cylinder, flat cylinder, pneumatic drive, piston, flat cylinder -Manufacturer: Festo, flat cylinder type DZH-32-100 PPV-A 14045 -Stroke travel: 100 mm -Piston rod: Ø 12 mm / M10 -Pmax: 10 bar -Quantity: 1 piece -Dimensions: 245/65/H80 mm Iolhcexwvkqsdwzebd -Weight: 1 kg

Condition: good (used), Linear drive, linear gearbox, lifting gearbox, spindle drive, pneumatic drive, slide, guide, electromechanical linear axis, mini slide, mini slide -Manufacturer: Festo: Mini slide type DGST-16-125- -Stroke: 125 mm -Shafts: Ø 6 mm -Number: 2 sleds available -Price: per piece -Dimensions: 210/85/H40 mm Ibjlhjxwvh Ajcdwzod -Weight: 1.4 kg/pc.

Condition: excellent (used), Year of construction: 2020, Servo motor, geared motor, electric motor, three-phase motor -Manufacturer: Lenze, servo motor with gearbox -Speed: 92.7 rpm -Engine: Type MCA 10140-RS0B0 -Voltage: 390 V / 140 Hz Ijlhsxwu Riscdwzjbd -Power: 0.80 kW -Transmission: Type G50BH121MVAR2C00 i=42.593 -Shaft: Ø 25 x 50 mm -Quantity: 1x geared motor available -Dimensions: 483/160/H170 mm -Weight: 12.5 kg

Condition: good (used), Hydraulic power unit, hydraulic pump, universal power unit, hydraulic station, diesel-hydraulic power unit, hydraulic power unit with diesel engine, diesel-powered hydraulic power unit -Manufacturer: Lombardini Denison, diesel-hydraulic power unit -Engine: Lombardini 9 LD 625-2 Ibolhcju Tyvnedwzod -Hydraulic pump: Denison type PV20 2LIC L02 000 -Liter output at 1500 rpm: 30 l/min -max. Displacement hydraulic pump: 20 cm³/rev -Max. pressure hydraulic pump: 350 bar -Max. speed of hydraulic pump: 2300 rpm -Individual components: see photos -Dimensions: 1450/810/H880 mm -Weight: 388 kg

Condition: good (used), Gear motor, electric motor, electric gear motor -Speed: 116 rpm -Power: 0.25 kW -Diameter: Ø 16 mm -Construction: B5 -Protection class: IP 54 Ibjlhcoc U Hgzedwzed -Number: 7x motors available -Price: per piece -Dimensions: 340/180/H145 mm -Weight: 9.8 kg

Condition: good (used), Flat geared motor, geared motor, electric motor, electric geared motor, flat geared motor, flat geared motor -Manufacturer: Nord, flat geared motor Islst E D Exehcdwzobd -Type: SK 2080A-80 L/4 i= 10.27 -Speed: 136 rpm -Engine: Type SK 80 L/4 -Power: 0.75 kW / 1380 rpm -Hollow shaft: Ø 30 x 100 mm Protection class: IP54 -Dimensions: 320/290/H205 mm -Weight: 20 kg

Condition: good (used), Guide cylinders, guide pneumatic cylinders, pneumatic cylinders, compact cylinders -Manufacturer: Festo, guide cylinder type DFM-20-125-B-PPV-A-GF 532316 Islhcdwjxwll Dozjbd -Piston: Ø 20 mm -Stroke: 200 mm -Max. pressure: 10 bar -Number: 2 cylinders available -Price: per piece -Dimensions: 260/85/H55 mm -Weight: 2.0 kg/pc.

Condition: good (used), Geared motor, electric motor, electric geared motor, aseptic motor -Manufacturer: SEW-Eurodrive, geared motor aseptic motor type WAF30 DAS80K4/TF/IS -Speed: 173 rpm -Power: 0.25 kW -Hollow shaft: Ø 20 x 100 mm, built-in shaft Ø 15 x 30 mm -Flange: Ø 120 mm -Recess: Ø 80 mm Protection rating: IP66 Ibjlhcdwogx Aluezod -Number: 2x geared motors available Price: per piece -Dimensions: 385/150/H210 mm -Weight: 14 kg/pc.