Used bulk feeders / bulk conveying equipment for sale (51)

Condition: used, Year of construction: 2021, Manufacturer : Brabender Model : DDW-M-FW40 Type: Flexwall gravimetric dosing unit for feeding powders/granules. Year : 2023 Kodpeyr S Atjfx Abnjdi Hopper volume: +/- 50 litres. Capacity : 3 - 30 kg/h Filling : gravimetric Flexible polyurethane hopper agitated by blades with adjustable amplitude Sold with original speed controller and drive unit Technical Data available

Condition: used, Year of construction: 2023, Manufacturer : Brabender Model : DDW-M-FW40 Type: Flexwall gravimetric dosing unit for feeding powders/granules. Year : 2023 Hopper volume: +/- 50 litres. Capacity : 20 - 60 kg/h Filling : gravimetric Flexible polyurethane hopper agitated by blades with adjustable amplitude Sold with original speed controller and drive unit Technical Data available Kodpoyr S Amefx Abnodi

Condition: used, Screw conveyors, auger conveyors Heavy-duty construction, suitable for large capacities Dimensions: 1x screw conveyor diameter 470mm, length 4000mm Kedpfxeyhblpe Abnedi 1x screw conveyor diameter 320mm, length 3800mm (excluding electric motor) 1x screw conveyor diameter 420mm, length 8500mm 1x screw conveyor diameter 420mm, length 3550mm 1x screw conveyor diameter 420mm, length 4050mm Equipped with heavy-duty external bearings with shaft sealing. For sale individually or as a lot. For more information, please contact us. See our other advertisements VMA Wekerom

Condition: used, Slide belt magnetic conveyor, magnetic slide conveyor DGS System GmbH Z-conveyor, sliding belt conveyor, conveyor belt, magnetic belt conveyor Type no.: MBF 326P31,75 Com. no.: 44489-10 Year of construction 2017 Slide width 300 mm Distance between permanent magnets 250 mm Insertion length approx. 3400 mm (up to body box) Slide-in length approx. 3900 mm (without superstructure box) Slide-in height 210 mm Insertion width housing 370 mm Insertion width threaded mounts for adjustable feet 410 mm Kdodpfx Aei Huzxsbnei Insertion width at body box 470 mm Conveying height - discharge height approx. 1040 mm Conveyor speed approx. 2 meters/min. Motor power belt drive 0.37 kW Mains connection 400 Volt, 50 Hz - Circulating chain equipped with permanent magnets Space requirement L x W x H 5200 x 700 x 1500 mm Weight 410 kg Very good condition

Condition: new, Year of construction: 2026, operating hours: 12 h, functionality: limited functionality, Ezystack Stockpiling Conveyor R6536 TR with tracked chassis, slewing via wheel drive. Equipment: Wired and radio remote control Weight: approx. 9,000 kg Kdjdpfjyk S T Nox Abnoi Transport dimensions: 12,036 x 2,350 x 2,519 mm (L x W x H) Drive motor / power: CAT 1.7 / 36 kW Discharge height: 7,952 mm Belt width: 900 mm Belt length: 18,530 mm

Condition: used, Manufacturer : Gericke Model : 150 BS Type: Rotary valve for pneumatic transport Direct connection to pneumatic transport pipes Hopper with level sensor: 20 litres Input/Output: DN1 : Ø60 mm Kodpfjykcamex Abnedi DN2 : Ø75 mm Bearing: air purge

Condition: new, Year of construction: 2025, operating hours: 99,999,999 h, functionality: fully functional, machine/vehicle number: 1101, usable tank capacity: 86,000 l, water tank capacity: 86,000 l, Steel horizontal storage tanks are designed for the containment of water, oil, and petroleum products. They are available in capacities ranging from 3 m³ to 100 m³. These tanks are characterized by high strength and reliability, ensuring safe storage and transportation. The horizontal steel tanks we manufacture are engineered for efficient use in various industrial environments, including fire protection, the oil and gas industry, and the processing and storage of petroleum products. Kedpfeyr Axfjx Abnedi For straightforward classification and customs clearance, these tanks are assigned the following TN VED codes: 7309005100, 730900, 7309005900. This simplifies import and export procedures for these products and ensures compliance with international standards. When ordering these tanks, you receive the most suitable solution for storing water and petroleum products in capacities from 3 to 100 cubic meters. Such volume options fulfill the requirements of both small businesses and large industrial facilities. Our steel horizontal tanks provide reliable handling and protection of stored materials from external factors, which is especially important for volatile and potentially hazardous petroleum products. To order steel horizontal tanks with a volume from 3 to 100 m³ and to receive further information, please contact us. We are confident that our tanks will serve as a dependable solution for storing oil and petroleum products at your facility.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SCC, warranty duration: 12 months, volume flow: 45 m³/h, screw conveyor length: 6,000 mm, type of input current: three-phase, screw diameter: 323 mm, input voltage: 400 V, rotational speed (max.): 240 rpm, rotational speed (min.): 140 rpm, NEW Cement Screw Conveyor – SCC Type | Made to Order | ISO 9001 Certified | Exported to 40+ Countries Custom-manufactured to order. Send us your diameter, length, and installation angle — receive a full technical quote within 24 hours. INOTEK SCREW manufactures heavy-duty SCC-type cement screw conveyors for bulk material handling in cement plants, dry mortar facilities, fly ash transfer, lime and gypsum processing lines. Based in Ankara, Turkey, we have supplied equipment to over 40 countries with full export documentation and ISO 9001:2015 certified production. KEY SPECIFICATIONS: - Diameter: Ø114 / Ø168 / Ø219 / Ø273 / Ø323mm – any size made to order - Drive speed: 140 / 200 / 240 RPM - Motor power: 1.5 kW to 22 kW (IE2 efficiency class) - Material: Carbon steel S235/S355 standard | AISI 304/316 stainless steel on request - Screw flights: cold-rolled, 3–10mm thickness - Orientation: horizontal, inclined (up to 45°), or vertical - Custom inlet/outlet: conical, square, or rectangular - Surface treatment: primer + epoxy topcoat standard | hot-dip galvanizing on request APPLICATIONS: Cement | Fly ash | Limestone powder | Dry mortar | Gypsum | Clay | Silo filling & emptying | Batching plants | Asphalt facilities WHY INOTEK: ✔ ISO 9001:2015 certified factory ✔ Exported to 40+ countries – full documentation (packing list, EUR.1, certificate of origin, test reports) Kodpfxsyq H Iue Abnodi ✔ References: Coca-Cola, Unilever, Anadolu Efes, major construction groups ✔ 20–35% more competitive than equivalent European pricing ✔ Production lead time: 3–5 weeks from drawing approval REQUEST A FREE QUOTE WITHIN 24 HOURS: Send us your required diameter, length, material type, and installation angle – we return a full technical offer and delivery schedule.

Condition: like new (used), Year of construction: 2010, functionality: fully functional, You are planning to expand your central drying system but would prefer not to incur the high costs associated with original manufacturers. We are pleased to offer you a cost-effective and technically reliable solution for this purpose. Kdodpfx Aewub E Rjbnoi Your in-house electrical engineering setup allows you to flexibly integrate the SIMAR conveying separators into any existing control system. All that is required for commissioning is the control signal “Conveying Start” (flap closed)—the conveying process then starts automatically. The units were operated exclusively with PP material without glass fibers in a cleanroom environment and are therefore in very good condition. 22 SIMAR conveying separators—from a cleanroom production facility near Karlsruhe. Features: - With machine hopper - Some units equipped with shut-off valve for emptying and mixing diverter - All units made of stainless steel If you wish to purchase a unit, the price is €785 each including machine hopper, valve, magnet, and much more! If you purchase all 22 units, you get the entire package including all accessories for €11,500. The estimated new price is at least €35,000. This is definitely worth a look!

Condition: ready for operation (used), Year of construction: 2013, A lifting, tilting, and sorting system for bulk materials within grid boxes is available. The system lifts the grid boxes approximately 3-4 meters high, tilts them into a transport vibrator, and the parts are then provided to the sorting system in a reduced quantity (feed rate regulation). Load capacity: 1000kg, pressure: 140bar. Documentation available. On-site inspection is possible. Expected to be available from the end of 2024. Kedpfouxdhhox Abnodi

Condition: used, functionality: fully functional, Sturdy feed hopper Kdodpfx Aeu Dhncsbnji Working area: 800 x 2,200 mm Electric motor, gearbox, eccentric reduction gear on a sturdy base frame

Condition: used, Stainless steel rotating valve. Diameter 250 mm. Kdjdpfx Ajx Rz Rxobnji Motor 0,75 kW, IP 55.

Condition: used, Year of construction: 2013, machine/vehicle number: HF 130: 0130410, overall weight: 1,910 kg, inner dimension length: 5,000 mm, inner dimension width: 2,159 mm, total length: 6,530 mm, total width: 2,480 mm, total height: 3,640 mm, rotational speed (max.): 1,400 rpm, power: 1.5 kW (2.04 HP), Technical data Capacity: 15cbm Empty weight: 1910kg Gearbox type: Double gearbox 063/130 Manufacturer: HF lnventer Electric motor power: l,SkW Number of motor revolutions: 1400 rpm Transmission ratio: 1/400 Kdjdpfer Dridex Abnei Serial number: HF 130: 0130410 NMRV063: 708271842 Power supply: 400 VAC Chain scraper: 168-1 Z=22 Removal of tractive force: Bearing set UCP207, 2 pcs. Coupling: Yes, LC170 l 1tk Chain scraper: 168-1 Z=25 Remove expansion shaft: UCT207 Bearing set 61, 2 pcs. Partition detection: UCP204 Bearing set, 2 pcs. Number of rollers: 10 Tosk type: 6006

Condition: used, Flowveyor International Ltd aeromechanical conveyor Cable conveyor Kodpoyf Aztsfx Abnedi Suitable for conveying powders Tube diameter: 76.1 mm Conveyor made of stainless steel Cable is made of food-grade plastic-coated cable Motor power: 1.5 kW Lifting height: 2350 mm (adjustable) See our other listings VMA Wekerom

Condition: excellent (used), Year of construction: 2000, A feed conveyor with steel hinge plate belt. It was last loaded using a wheel loader and tipper truck. Overall structural length: 9.6 m Hopper size: 8.0 x 3.6 m Conveyor width at the bottom: 1.85 m Maximum width with drives: 3.2 m Conveyor belt width: 1.3 m Kdsdpfeiwxmbjx Abnoi Overall height: 5.3 m Belt speed: 0.05–0.29 m/min Conveyor chain: FV 315 with bushing and wear-resistant roller Throughput capacity: 3 to 14 m³/hour Belt geared motor SEW: 0.75 kW Speed: 0.2 rpm Torque: 18,000 Nm Reel shaft speed: 64 rpm Reel geared motor Flender: 7.5 kW Total weight: approx. 20 tonnes With steep conveyor belt included.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, DMN-WESTINGHOUSE PTD plug-type deflectors are specially designed for conveying powder and pellets with minimal degradation in pneumatic conveying systems. PTD plug type baffle is used in chemical, pharmaceutical, plastic, food and other related industries. The smooth passage of products is guaranteed by precision machining, good sealing and completely unobstructed passage. The user-friendly, foolproof design enables quick in-situ internal inspection, cleaning and replacement of seals if necessary. The PTD design complies with all applicable workplace safety legislation. Consequently, there are no moving parts on the outside. Pressure up to 3 bar g with static seals PTD 80 Ksdpfx Aomgb Hhsbnodi Aluminum housing, tube stainless steel Ø 76.1 x 2.0 mm Pneumatic operation 5/2 with two-way valve 2 coils 24 V DC With 2 inductive limit switches

Condition: reconditioned (used), Year of construction: 1989, functionality: fully functional, volume flow: 12.6 m³/h, overall weight: 200 kg, total length: 1,250 mm, total width: 415 mm, total height: 450 mm, type of input current: three-phase, input voltage: 400 V, rotational speed (max.): 25 rpm, rotational speed (min.): 20 rpm, torque: 390 Nm, 2 pieces of unused rotary valve dosing sluices. Both sluices have been completely overhauled. New bearings and seals have been installed. ! Price per item ! Manufacturer: Kreisel Industries GmbH Type: ZS315-1 Size inlet / outlet: 300 x 300 mm Housing material: cast iron / Rotor: welded steel sheet Overall height: 450 mm Number of cells: 7 Cell dimensions: length 300 mm / width 100 mm / height 40 mm Weight: 200 kg per piece The geared motors are also unused old stock. Manufacturer: Thurm DDR Year of manufacture: 1990 Function tested! Bearings can be relubricated from both sides externally. Kjdpex N A N Tefx Abnjdi Sluice 1 Drive power: 0.75 kW Speed: 20 rpm Theoretical delivery rate: 10 m³/hour Sluice 2 Drive power: 1.1 kW Speed: 25 rpm Theoretical delivery rate: 12.6 m³/hour

Condition: good (used), functionality: fully functional, “4 Pcs. AEG OA 1750 / 900 – AS – GY” for Sale Manufacturer: AEG Type: OA 1750 / 900 – AS – GY Size: 1.750 x 900 (750)mm Magnetic Vibrator: MV G (8 kW) / MV 400 (7 kW) Thyristor controller: Included Frame: With/Without With Stainless steel wear plate. Kdodpfeu Tkrajx Abnsi

Condition: used, Flowveyor Kdedpfsx Nzzbsx Abnji Powder intake cabinet with cable conveyor Tube diameter: 76 mm Total length: 4600 mm Motor power: 2.2 kW Plastic-coated cable (food-grade) See our other listings VMA Wekerom

Condition: used, Entecon conveyor flowveyor cable conveyor aerodynamic transport Tube diameter: 76.1 mm Completely stainless steel Total length: 4300 mm In very good condition See our other listings Kdjdpfjx Nymcox Abnoi VMA Wekerom

Condition: used, Stainless steel dosing screw, pipe screw, auger Diameter: 150 mm Ksdpex Nykhjfx Abnsdi Motor power: 1.1 kW, 148 rpm Entirely stainless steel See our other listings VMA Wekerom

Condition: used, Stainless Steel Vibrating Chute Kjdox Nygiepfx Abnsdi Dimensions: 800x220 mm See our other listings VMA Wekerom

Condition: good (used), D-1035-Double bulk feeder with weight Used Stainless Steel double bulk feeder with weight. Dimension: Vat L 1800 X W 850 X H 1300 mm Kdjden Nxqwjpfx Abnoi Bigger belt: 460 mm, Small belt 100 mm, flight 80 mm L 2700 + weight 500 mm , Total L 3200 mm

Condition: good (used), Item: D-1036-Bulk feeder. ABK Sweden Type: STR 301 Stainless Steel bulk feeder with close vat at bottom. Kdodpfxsn Nxprj Abnei Discharge height: 2700 mm Dimension: L 3500 x H 2700 x W 1500 mm Vat: W 1500 x L 1450 x H 1350 Vat inside: W 900 x L1050 x H700 Flight height: 100 mm Belt width: 300 mm

Condition: like new (used), Year of construction: 2021, operating hours: 15 h, functionality: fully functional, input voltage: 230 V, Equipment: CE marking, Bin tipper with 130° rotation Maximum load 200kg at 350mm from the carriage Loading of 80, 120, 140, 240-litre wheelie bins at floor level Kdsdpfxex Hq Ave Abnsi Bin retention by the wheels Discharge height 1284mm from ground level Cycle time: lifting 17s; lowering 12 seconds Power supply 230V Double control panel Up and down buttons with operator safety; Continuous contact and operation validation required