Condition: good (used), Forced mixer, agitator, stirring device, mixing tool, stirrer -Nominal input: 1000 watts -Connection: 230 volts Ppsdpfob A Rglsx Agpel -Speed: 500 rpm -Dimensions: 500/200/H100 mm -Weight: 5 kg

Condition: good (used), Forced mixer, agitator, stirring device, mixing tool, stirrer -Nominal input: 1000 watts Ppjdpfx Agob A Rgkjpol -Connection: 230 volts -Speed: 500 rpm -Dimensions: 650/300/H200 mm -Weight: 6 kg

Condition: good (used), Forced mixer, agitator, stirring device, mixing tool, stirrer Psdeb A Rnzjpfx Agpjpl -Nominal input: 1400 watts -Connection: 230 volts -Speed: 0-510 rpm -Dimensions: 600/500/H180 mm -Weight: 8.5 kg

Condition: good (used), Forced mixer, agitator, stirring device, mixing tool, stirrer Ppodpfxjb A Hhwo Agpel -Nominal input: 1400 watts -Connection: 230 volts -Speed: 0-510 rpm -Dimensions: 600/500/H180 mm -Weight: 8.5 kg

Condition: good (used), Forced mixer, agitator, stirring device, mixing tool, stirrer -Nominal input: 1400 watts -Connection: 230 volts Podpfob A Ikajx Agpepl -Speed: 150-470 rpm -Dimensions: 920/450/H220 mm -Weight: 7 kg

Condition: good (used), Rotary hammer, chisel hammer, combination hammer, Bosch hammer -Nominal power input: 620 W -Mains connection: 230 V -Drill -div. drills -Suitcase -Weight: 5.5 kg Ppsdpfxeb A Hxue Agpel

Condition: good (used), Schleuniger CS 9100 Cut & Strip Machine for cable processing: Conductor cross-section: 0.0324 mm² to 6 mm² Wire length: 1 mm to 1000 meters Accuracy: Repeatability +/- 0.2% (resolution 0.14 mm). Stripping length: Partial stripping up to 30 mm, complete stripping up to 50 mm right and 30 mm left. Production rate: Up to 3,600 pieces/hour (100 mm length, 4 mm partial strip). Transport speed: 210–1400 mm/s. Blades & jaws: V-blades (standard), optional radius V-blades, diamond or knurled jaws. Interfaces: RS 232 serial port for PC communication Dimensions: 610 x 540 x 310 mm Weight: 42 kg Ppedpfx Agjx Sthlepol #8450

Condition: good (used), Rotary hammer, chisel hammer, combination hammer, Bosch hammer -Drilling/Chiseling -SDS Plus: Recording -Transport case Podpob A Rl Isfx Agpjpl -Weight: 5 kg

Condition: good (used), Rotary hammer, chisel hammer, combination hammer, Bosch hammer, impact drill, chisel hammer -Manufacturer: Hitachi, Rotary hammer type DH 25V with transport case -Nominal power input: 600 W -Drilling/Percussion drilling -Speed: 0 - 800 rpm Psdpjir E Syefx Agpjpl -Drilling capacity: Steel 13 mm / Concrete 25 mm -Case dimensions: 445/340/H170 mm -Weight: 10.3 kg

Condition: good (used), Clamp welding machine, foil welding machine -Connection: 220 V -Working width: 300 mm Ppsdpfeb A Sm Dsx Agpel -Weight: 10 kg

Condition: used, Atlas Copco type RIL-10 balancer/spring balancer for guiding pneumatic hand tools or similar. The spring balancer relieves the operator of the weight of the tool. Ppedpswuug Uofx Agpel Min / Max: 1.8 / 4.5 KG

Condition: excellent (used), Thyristor controller with field regulator (28211) Make Unitek type 82 Classic Q. 3 400/450-60 UE 400 UA 450 ld 60 A Ia 120 A Weight 11 kg Pedpfx Agjhhyy Rjpjpl Width 290 mm Depth 230 mm Height 225 mm

Condition: new, We are selling various Hilti suction drill bits from our remaining stock. Pjdpfx Aext Uflogpjpl

Condition: good (used), Year of construction: 2015, functionality: fully functional, type of input current: AC, input voltage: 400 V, ground cable length: 5,000 mm, type of cooling: water, TIG welding unit, water-cooled, DC/AC power source CITOTIG 350W AC/DC Welding current range 3...350A DC / 10...350A AC with 5m power cable with plug for mains connection 3 x 400V - Gas hose 1.5m - Ground cable with fixed clamp 5m, 50mm2 - Transport trolley TY2A - Coolant FREEZECOOL 10l - TIG torch CITORCH T 35W EB C5B, 5m water-cooled Ppedpox A S Txsfx Agpel - TIG torch CITORCH T 10W EB C5B, 5m water-cooled - Argon / CO2 pressure regulator

Condition: like new (used), Fronius used -TPS4000CMT / TransPuls Synergic 4000 CMT R Ppedpfx Aspa N Aaegpol - cooling unit FK4000-RFC (4,045,837,632) water cooled - RCU5000i remote control Univ.SD (4,046,098) - VR7000 CMT R (4,045,963,000 - Angle encoder CMT (43,0001,1219) with robot hose package kPL Robacta - Interface Interbus Rugged Line(4,045,885) (optional Profibus and Profinet connections available)

Condition: new, Year of construction: 2018, functionality: fully functional, High-performance gas-powered tool for concrete, steel, and solid masonry fixings Pjdpfx Agexx Dffspjpl Driving energy: 105 J Rated voltage: 6 V/DC Battery capacity: 1.5 Ah Number of fixings per battery charge: 3,000 pcs Magazine capacity: 40 pcs Length: 435 mm Width: 124 mm Height: 365 mm Machine weight with battery: 3.7 kg Scope of delivery: 1x new/unused device Numerous collated nails and gas cartridges A used machine in very good condition is also available separately. Surcharge: 250 EUR

Condition: used, Diamond core drilling machine, drill, REMS Picus S1 Basic-Pack electric diamond core drill + REMS Simplex 2 drill stand, Used machine Manufacturer: Rems Type: Picus S1 Overall dimensions: Pjdpfx Agjxpqvrepspl Width: 670 mm Depth: 260 mm Height: 160 mm REMS Picus S1 Basic-Pack Motor: 1850 W universal motor Speed (under load): ~ 580 rpm Max. drilling diameter in reinforced concrete: Ø 102 mm (up to Ø 132 mm under certain conditions) Max. drilling diameter in brick / masonry: Ø 162 mm Drilling depth: up to 420 mm Weight: approx. 5.2 kg Connections & accessories: Drill bit connection: UNC 1¼ external thread, G ½ internal (water connection) Water supply unit with shut-off valve, quick coupling, and water stop function Multifunctional electronics: soft start, overload protection, idle speed limiter, blockage protection Safety slip clutch REMS Simplex 2 Drill Stand Suitable for core drilling up to Ø 200 mm Drill column: precision, square steel profile Ø 50 mm Adjustable for floor unevenness: 4 screws for correction Slide guide: adjustable on all sides, with preloaded plastic bearings Drive: rack-and-pinion system with ratchet lever operation Clamp and collar for Ø 60 mm gearbox mounting Integrated spirit level, with slide lock for easier adjustment and transport Weight: approx. 12 kg

Condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 6159326930, 6159326910 – CVI3 Vision Controller (Touchscreen) • Interface: 5.7-inch color touchscreen for intuitive operation and programming • Power & Ports: Single-phase 115–230V AC supply; equipped Ethernet port and USB ports for peripheral connectivity • Capability: Controls one or two tools (expansion via Twin module) with advanced tightening strategies • Features: Full-featured controller with user-friendly GUI, supports both corded Ppedpfx Agswfrdlspjl and battery tools integration The CVI3 Vision is a high-end controller in the Desoutter CVI3 series, featuring a large touchscreen interface for easy confiuration and monitoring. It offrs extensive connectivity and supports complex assembly processes with visual feedback and menu navigation. This controller is ideal for stations requiring an operator-friendly interface and comprehensive control over tightening parameters

Condition: used, machine/vehicle number: 149774, for screws: M 8 - M 16 Psdpsby Np Ejfx Agpopl max. tightening torque: 140 Nm Tool holder, square: 1/2" electrical connection: 220 V, 280 W weight: 3,3 kg

Year of construction: 1970, condition: used, machine/vehicle number: 3566, Melting chamber dimensions Length: 240 mm width: 200 mm Depth: 40 mm Podpfob Nxf Tox Agpspl Solder capacity: 16 kg Power input: 2400 W for mains voltage: 220 V

Condition: used, machine/vehicle number: 050189, for groove width: 13 - 30 mm Pjdpfx Ageb Amlhopopl for groove depth: 22 - 35 mm Milling cutter speed approx.: 1200 rpm drive motor: alternating current 220 V, 1020 W Weight: approx. 6 kg

Condition: new, functionality: fully functional, overall weight: 7 kg, SAUER DUO S3 renovation milling machine, brand new Voltage: 230V / 50 Hz Power: 1500 Watts RPM: 2200, head diameter 150 mm. A floor milling machine for: removing adhesives, removing paints, levelling concrete, etc. With proper dust extraction, the machine is suitable for asbestos remediation. We can offer the machine HM Splite with multiple milling heads HM Split. SAUER Trioschleifer DTS 850. Demonstration machine 230 Volts / 50 Hz 750 Watts, weight 2.6 kg. Pjdpfxexp Supo Agpspl Speed: 1500 - 13,000 RPM. We can supply this machine with a wide range of accessories (see the pictures).

Condition: used, length mm height mm total power requirement kW weight of the machine ca. t dimensions of the machine ca. m Podpfjl Ebxkex Agpjpl Pulse welder Hybrid 4002 Year of manufacture 2005 Feeding device / 4 rolls wire feed DV 39 machine no.: 940 16 222 - Welding hose 4000mm - Ground cable 70 square 5000mm - Intermediate hose package approx. 4000mm - Hose package Binzel MB511 Pulse current

Condition: new, functionality: fully functional, Inline Screwdriver Station with Reaction Arm (Higher Torque) Podpfx Agswduq Eopspl This station is designed for medium to high torque fastening applications, using an inline electric screwdriver mounted on a reaction arm for enhanced precision and ergonomics. Controlled by a Desoutter CVI3 Vision Controller, it offers advanced tightening strategies, real-time data logging, and full integration with plant networks via Profinet. The screwdriver delivers accurate torque and angle feedback, suitable for applications up to approximately 12 Nm. A positioning reaction arm with encoded axes ensures proper tool alignment and absorbs reaction forces, improving operator comfort and process consistency.

Condition: like new (used), DELFIN INDUSTRIAL VACUUM CLEANER INDUSTRIAL VACUUM 400V EXCELLENT CONDITION SCOPE OF DELIVERY = AS SHOWN IN PICTURES Psdpfxswd D R Uo Agpopl (Approx. 1/4 - 1/5 of the price of a new unit – TOP OFFER) 4 units available Delfin ESD.DX.0036 Industrial Vacuum Cleaner – Excellent condition, ideal for industrial applications Manufacturer: Delfin Model: ESD.DX.0036 Condition: Very good, with only minor signs of use Functionality: 100% operational Features: ✅ ESD protection: Specifically designed for use in electrostatically sensitive areas – ideal for cleaning electronic components and delicate equipment ✅ High suction power: Efficient cleaning with a high-performance motor and excellent suction capacity ✅ Robust and durable: The Delfin ESD.DX.0036 is built for continuous operation in industrial environments and workshops ✅ Versatile: Ideal for dust extraction, cleaning machines, production areas, and construction sites ✅ Easy to operate: Simple handling with ergonomic handles and a user-friendly control panel ✅ Low energy consumption: Powerful yet energy-efficient and environmentally friendly Technical details: Easy maintenance: The Delfin ESD.DX.0036 is easy to maintain and spare parts are readily available Robust construction: Optimized for industrial use, with exceptionally durable materials capable of withstanding extreme conditions Industrial businesses Cleaning laboratories and production facilities ⚡ Use in ESD-protected areas ️ Workshops, machine cleaning Cleaning electronics and sensitive devices Why choose this vacuum? The Delfin ESD.DX.0036 is the ideal choice for companies seeking a reliable, high-performance, and energy-efficient industrial vacuum cleaner. With ESD protection and powerful suction.