Mesh welding line

FROMA 8/SR12

Condition: used, fuel type: diesel, Year of construction: 2015, operating hours: 5,093 h, Empty weight: 73.100 kg Make of engine: Cat 15 Track width: 90 cm CE mark: yes Number of owners: 1 EPA Marked: yes Gtodsw U Iu Rjpfx Ag Sjt Please contact Kristoff Van Havere for more information - Hydraulic quick hitch CW70 - Bucket full hardox Verachtert 2000mm - Full piping - Central grease system - Cab overpressure filterunit

Year of construction: 2025, condition: new, functionality: fully functional, working width: 2,400 mm, wire diameter (max.): 8 mm, mesh size: 6,000 mm, welding power (max.): 900 kVA, Double cross wire mesh welder VM-15/25-1000NC-UD-2C Technical characteristics - power: 14 x 63 kVA - drawing motors: 155 kW - el. voltage: 3 x 400 VAC - controlled by: PC - wire mesh dimension: 6000 x 2000 mm - wire diameter: 4-8 mm/6-10 mm - distance between line wires 150 mm and 200 mm - distance between cross wires from 150 to 200 mm Gtsdpfx Aeuv Eg Hjg Sst - working speed 180 cross wires/min - machine dimension: 55 x 11 x 4 mm - machine is operated by two workers

Condition: good (used), functionality: fully functional, We offer for sale a complete line for multi-point automatic welding of SCHLATTER brand steel wires. We have three fully operational production lines. There are also automatic machines for the production of transverse wires (so called slitting machines with a cutter). We also have a number of single point welding machines for steel wires. Gtsdpotvpiljfx Ag Sst

Condition: excellent (used), Year of construction: 2003, working width: 215 mm, welding power (max.): 750 kVA, Complete Mesh welding/Lattice girder factory Factory consists : - Mesh welding line SCHLATTER PG 24 , Semi- automatic , Year - 2002 - Lattice Girder Line SMEI , Full automatic , Year - 2003 - Straightening and cutting machines 1x Wafios R4 2 x VITARI NR16 1X VITARI NR10 - Cold drawing line SMEI , Input wire max.10mm, Speed - 4m/sec. - But welding achine SMEI - Wire sharpener SMEI Gjdpfx Agoqy Ek Ao Sstt

Year of construction: 2009, condition: new, belt dimensions 2000x100mm Belt speed 30m/sec Angle adjustable from 30 to 90 Power 3kW 4000V50Hz Weight 200kg Rollers for grinding rye 3/4";1/2"; 1"; 11/4" Gtsdox Davepfx Ag Sjt

Condition: refurbished (used), SCHLATTER Welded wire mesh production line MG24 Full revamped WORKING RANGE Panel width: max. 2500 mm Weft wire length: min. 900 mm Weft wire length with QF5 dispenser: min. 300 - 1600 mm Spacing between extreme warp wires: max. 2400 mm Mesh length (warp wire length): max. 2500 - 6000 mm Spacing between warp wires: min. 100 mm Spacing between weft wires: 25-250 mm Adjustable by cutting device (0-1) Warp wire diameter: 4.0 - 12.0 mm Weft wire diameter: 4.0 - 12.0 mm Number of warp wires: max. 24 WELDING MESH MACHINE MG 24.1/8C, Basic equipment including: - 1 Machine frame - 1 Upper support for press reception, continuously adjustable by hand crank - 1 Magnet supports with retaining magnets and weft wire monitoring. - 1 Row of pneumatic solenoid valves for press actuation. - 1 Installation for air and water. - 2 Pneumatic rotary drives with oil damping - Static motor torque with 5 bar compressed air: 480 Nm - Front continuously adjustable from: 25 - 250 mm adjustable by cutting device (0-1) - 1 Advance carriage with panel lifting device - 1 Set of tools for machine adjustment WELDING SECTION 8 Type C Transformers Rated power of each transformer: 100 kVA No-load secondary voltage: 7.1 V Rated secondary current: 14 kA 8 Thyristor contactors ES 130 12 Welding presses: 5.0 kN 12 Chain current bridge for spacing of warp wires: 50-100 mm 12 Chain current bridge for spacing of warp wires (for offset warp wires): 100 mm Godpfx Aowu Tu Djg Sott 10 Chain current bridge for spacing of warp wires: 100-150 mm 8 Chain current bridge for spacing of warp wires (for offset warp wires): 150 mm 6 Chain current bridge for spacing of warp wires: 150 - 200 mm 6 Chain current bridge for spacing of warp wires (for offset warp wires): 200 mm 24 Lower electrode holders Cu with standard angled electrodes and each with a water-cooled current cable, width: 58 mm 24 Wire clamping pliers Panel width: max. 2500 mm Weft wire length: min. 900 mm Weft wire length with QF5 dispenser: min. 300 - 1600 mm Spacing between extreme warp wires: max. 2400 mm Mesh length (warp wire length): max. 2500 - 6000 mm Spacing between warp wires: min. 100 mm Spacing between weft wires: 25-250 mm Warp wire diameter: 4.0 - 12.0 mm Weft wire diameter: 4.0 - 12.0 mm Number of warp wires: max. 24

Condition: like new (used), Year of construction: 2008, YEAR : 2008 Year MAXIMUM PRESSURE OF THE RAM : Ton. 2.000 Ram capacity SLIDE STROKE : mm. 1500 Slide strok Gtodpfxovm Eixs Ag Sst TABLE DIMENSIONS : mm. 5000 x 2380 Table size PRESSION OF THE BLANKHOLDER UPPER : Ton.300 Blankholder STROKE OF THE BLANKHOLDER SLIDE : mm. 200 Cushion stroke ram RAPID SPEED : mm/sec 220 Fast stroke PRESSION OF THE BLANKHOLDER CAPACITY : Ton. 600 Cushion capacity STROKE OF THE BLANKHOLDER SLIDE : mm. 400 Cushion stroke HEIGHT ABOVE GROUND : mm. 9,145 Ground up to floor FRONT LIGHT: 5000 mm Distance btw uprights TOTAL WEIGHT: KG. n.d

Condition: excellent (used), Year of construction: 2007, COMPLETE mesh welding plant Plant consist of - 1. Mesh welding line SCHLATTER model MG-230 Min/Max wire diam - 3,5 - 14,00 mm Max width of mesh - 2.500mm Line and Cross wire feeding - from precut wires / bars Construction year - 2007 2. COMBINED rolling/ribering/straightening/cutting line Line is COMBO - wire rolling/ribering/straightening/cutting Construction year - 2023. 3. Straight and cut machine WAFIOS model R-41-L Min/Max wire diam - 3,00 - 10,00 mm Max cutting length - 10.000 mm Construction year - 1990. Please contact us for more details. Gtodpfowr Tk Hjx Ag Sst VIDEOS AVAILABLE upon request.

Condition: good (used), Year of construction: 1991, Mesh welding line EVG model G95/102 Min / max wire diam - 4,00 - 12,00 mm Max width of mesh panels - 2.750 mm Gtsdpfx Agovxq Eij Sjt FULLY AUTOMATIC - Lines wires and CROSS wires feeding from coils / spools. Please see attached document !

Year of construction: 1999, condition: used, Lattice girder line PITTINI IMPIANTI (Italy) Brand name – Pittini Impianti ( made in Italy) Gtjdpoikvg Nefx Ag Sot Built year – 1999. Still installed, under power, production stoped 5 years ago. Min – Max UPPER longitudinal wire diam. - 5,00 – 12,00 mm Min – Max LOWER (2 wires) longitudinal wire diam. - 4,20 – 12,00 mm Min – Max Fret(zig-zag) wire diameter – 3,60 – 8,00 mm Min – Max lattice girder height – 90 – 250 mm Lattice girder base width – 100 mm Lattice girder pitch – 200 mm Min - Max. Cutting length (run-out table) – min. 3,60 m - max 12 meters. Min. Cutting length – 200 mm Max speed (capacity) – 24 meters per minute Power – 380 V , 50 Hz Total installed power – 85 kW