Used cranes for sale (667)

Condition: excellent (used), Hoisting unit Manufacturer: DEMAG Type: P 416 H7/2 3.2 t with trolley Load capacity: 3,200 kg Hook travel: 7 metres 2 lifting speeds: 8 / 0.8 m/min Year built: 1978 Trolley travel speed: 14 m/min Iasdpfx Aex Ncptsd Njl

Condition: good (used), functionality: fully functional, Year of construction: 1991, total height: 6,000 mm, total length: 0 mm, total width: 220,000 mm, load capacity: 3,200 kg, working height: 6,000 mm, Steel chain hoist with load hook and radio remote control ELK AS 308-20 4/1 Lifting capacity: 3,200 kg Lifting height: 6.00 m Lifting speed: 16 m/min. 400V, 3-phase, 50 Hz Year of manufacture: 1991 Radio remote control Dismantled, immediately available Ijdpfx Aewtf Dbjd Njal

Condition: good (used), Column jib crane, overhead crane, workstation crane Isdpfelb Iv Tjx Ad Nsal -Manufacturer: DEMAG, Column jib crane, lifting capacity 250 kg -Base plate: 550 x 550 mm -Protrusion: 2,860 mm -Total height: 5110 mm -Hook height: 3170 mm -Swivel range: 270° -Chain hoist: can be supplied for an additional charge -Transport dimensions: 5110/800/H550 mm -Weight: 380 kg

Condition: like new (used), - Total height: 4300 mm - Arm length: 4000 mm Iasdpfxovkcv Ds Ad Nsl - Schmalz vacuum suction cup - Suction cup height from the ground: 1700 mm - Maximum manipulator load capacity: 500 kg - Maximum horizontal suction cup load capacity: 400 kg - Maximum vertical suction cup load capacity: 150 kg

Condition: excellent (used), I will sell a 250kg crane + Demag winch. In very good condition. Iodpfxowdraqe Ad Neal - Total length 185cm/ working 140cm. - Height 278cm.

Condition: used, functionality: fully functional, overall weight: 6,410 kg, total length: 19,250 mm, load capacity: 10,000 kg, main lifting speed: 800,000 mm/min, Equipment: documentation/manual, Bridge Crane Manufacturer: ABUS Model: ELK Iaodex I Aapjpfx Ad Njl Span: 19,250 mm Lifting Capacity: 10,000 kg Operation via HBC radio remote control and pendant control possible Complete documentation available CE

Condition: excellent (used), Bridge crane Manufacturer: DEMAG Iaedpfx Adex Hfute Njl 3.2 t Single-girder suspension crane: span 12 meters Lifting height 5.5 meters Speeds: Main hoist 4 m/min Fine hoist 1 m/min Trolley travel 14 m/min Crane travel 20 m/min Year of manufacture 1974 Weight 2.6 t Trolley weight 400 kg

Condition: used, Demag PK 10 N electric chain hoist with electric trolley complete Iaedpforvkanjx Ad Nsl

Condition: excellent (used), Year of construction: 2020, Pillar jib crane, indoor crane, workstation crane -Manufacturer: Demag, pillar jib crane load capacity 125 kg -Base plate: 350 x 350 mm -Thrust: 2,000 mm -Total height: 1,780 mm Isdpfx Aoxmi R Ajd Njal -Hook height: 840 mm -Chain hoist: DEMAG type DC-Com 1 125 1/1 H4 V8/2 -Main stroke: 8.0 m/min -Fine stroke: 2.0 m/min -Transport dimensions: 540/2100/H500 mm -Own weight: 176 kg

Condition: ready for operation (used), Abus Jib crane 3 meter / 250 kg Isdpox Dd Iqsfx Ad Njal

Condition: like new (used), functionality: fully functional, Year of construction: 2023, total length: 7,240 mm, 2 overhead cranes available, as good as new, price per crane excl. VAT and excl. transport. Dismantling to be carried out by the buyer. Suction cup can be purchased additionally. Iaodpfx Aox N Ibujd Njl

Condition: excellent (used), functionality: fully functional, Year of construction: 1999, Demag slewing crane Jib length: 5000 mm Height: 3300 mm Load capacity: 500 kg TÜV: until 2026 Isdox Rn T Hepfx Ad Noal

Condition: excellent (used), Pillar jib crane Make: Abus Load capacity: 500 kg Jib length: 4000 mm Lifting height: 2600 mm Isdjx Hfuaepfx Ad Neal Total height: 3550 mm Height of yellow column: 2950 mm Height of extension: 550 mm Base plate: 800 x 800 mm - 40 mm thick Abus chain hoist with 2 speeds 7.2 m/min and 1.8 m/min.

Condition: excellent (used), Year of construction: 2000, overall weight: 2,000 kg, total length: 3,000 mm, Overhead Crane ABUS - VS 2t x 3000 MACH-ID 9306 Make: ABUS Type: VS 2t x 3000 Ijdpfx Adjx Dkxio Neal Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Column jib crane, overhead crane, workstation crane, mobile column jib crane, transportable column jib crane, traveling crane -Manufacturer: VEB, Column jib crane type KHZ 250, lifting capacity 120 kg (column jib crane designed for 250 kg) -Base plate: 440 x 440 mm -Protrusion: 1,780 mm -Total height: 2,940 mm -Hook height: 2,280 mm -Swivel range: 360° -Chain hoist: Pfeifer type CH1, year of manufacture 2007 -Main stroke: 8.0 m/min -Fine stroke: 2.0 m/min -Base: 820x820x285 mm -Dimensions: see photo technical drawing Iaodpfjxnwnlex Ad Nel -Transport dimensions: mm -Empty weight: 1300 kg

Condition: ready for operation (used), Dalmec PEC 50 kg Iaedjx Dd I Rjpfx Ad Nol

Condition: excellent (used), Year of construction: 2000, overall weight: 1,000 kg, total length: 6,000 mm, Overhead Crane ABUS - VS 1t x 6000 Iajdpfx Aox Dkrvjd Nsl MACH-ID 9307 Make: ABUS Type: VS 1t x 6000 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Column jib crane, overhead crane, workstation crane -Load capacity: approx. 250 kg -Reach: 1100-1800 mm Iasdpfx Adeb A Iknj Nsl -operated: pneumatically -swivel -Weight: 85 kg

Condition: excellent (used), Year of construction: 2000, overall weight: 1,000 kg, total length: 4,250 mm, Overhead Crane ABUS - VS 1t x 4250 MACH-ID 9308 Make: ABUS Type: VS 1t x 4250 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Iaedpfxex Dkqlo Ad Nsl

Condition: used, Air tube bundle extractor, air tube bundle assembly station for heat exchangers, cooling coil, cooling pipe, cooling spiral, tube bundle heat exchanger Iajdpfx Aew Ty Dned Nel -Handover: in its current condition as inspected (without documentation) -Condition: Diesel engine currently out of service -Air tube bundle extractor: Hydro-Extractors INC -Type: 504- Diesel -Dimensions: 8400/1900/H2850 mm -Transport dimensions: 8400/1900/H1700 mm -Weight: 6860 kg

Condition: good (used), Year of construction: 1967, Overhead crane, crane, electric hoist, lifting device, motor winch, motor winch, tackle, winch, pulley system -Rated load: 500 kg Iedpfx Adob A Hazj Neal -Lifting speeds: 1/3 m/min -Lifting height: 6 m -Double strand

Condition: good (used), Year of construction: 1995, Double girder traveling crane, bridge crane, overhead crane, assembly crane, workstation crane, ceiling-mounted traveling crane, traveling crane, crane system Iajdpfsb A Ny Esx Ad Nel -with 2x electric cable winches -Load capacity: 2 x 1600 kg -Bridge load capacity: 3.2 tons -Wingspan: 6.4 m -Hallway service -Dimensions: 2000/6400/H1000 mm -Weight: approx. 2000 kg

Condition: excellent (used), Bridge crane, indoor crane, disc brake, crane brake, disc, drum and storm brakes, overhead crane brake, brake ring, conical brake disc, conical brake disc, conical brake ring -Manufacturer: Demag, conical brake disc conical brake ring -Type: Mounting: Shaft Ø 46/50 mm -Bolt circle: Ø 70 mm M10 -Dimensions: see photos -Number: 2x brake disc available -Price: per piece -Dimensions: Ø 288 x 90 mm -Weight: 6.3 kg/piece Ijdpfjxc Ezcox Ad Njal

Condition: good (used), Year of construction: 1985, Manipulator, lifting aid, lifting device, workstation crane, overhead jib crane, overhead crane, workstation crane, material grabber, column jib crane -Manufacturer: Thyssen, pneumatic manipulator type ESP -Load capacity: 30 kg -Operating pressure: 6 bar -Reach: max. 2900 mm -Hook height: min. 500 mm / max. 1500 mm -Swivel range: 360° -Minimum ceiling height: 4400 mm -Transport dimensions: 3410/800/H2000 mm -Empty weight: 610 kg Iajdpfex Ec Ifex Ad Nol

Condition: good (used), Year of construction: 1998, Column jib crane, overhead crane, workstation crane -Base plate: Ø 910 mm -Load capacity: 3000 kg -with chain hoist: Vetter type SIE 10F, year of manufacture 1998 -Lifting speed: 2.8/0.9 m/min Iasdpsx D Uwvofx Ad Nol -Drive system: yes -Swivel drive: yes -Reach: 6000 mm -Total height: 4150 mm -Hook height: 3000 mm -Swivel range: 360° -Transport dimensions: 2110/6770/H2020 mm -Empty weight: 1880 kg