Used Bale presses for sale (214)

Condition: used, Year of construction: 2012, Strautmann Baler, Type Bale Tainer, Pressing Force 60 t, Year of Manufacture: 2012 Technical Specifications: Manufacturer: Strautmann Umwelttechnik Type: Bale Tainer Year of Manufacture: 2012 Dkjln E Sov Umw Ho Hvol Operating Hours: 11,238 Pressing Force 60 t Total Power 20 kW, 400 V/50 Hz Filling Opening Height 2,032 mm Filling Opening Width 1,069 mm Bale Dimensions 1,100 x 1,100 x 700 mm (W x D x H), 3 Discs Bale Weight up to 400 kg (3 Discs) 4-Way Vertical Tying Machine Dimensions with Feeder: 6,572 x 2,056 x 2,756 mm (L x W x H) Weight Approx. 7,450 kg Materials: Paper, cardboard, PET bottles, film Remarks: The press is in good condition. It was inspected and tested by us in 28816 Stuhr, Germany. The video can be found above with the pictures, or on our website or YouTube channel. Viewings, including live viewings, are possible at any time by appointment. Upon request, we can also conduct tests with your material for a fee. We are happy to answer any questions about the machine by phone Monday through Thursday from 8:00 a.m. to 2:00 p.m. On Fridays, we are available from 8:00 a.m. to 1:00 p.m. Please note: All technical data refers to the manufacturer's specifications. We assume no liability for the information provided or for any errors. This offer is subject to change without notice, subject to prior sale, and revocable at any time. Viewings are possible by appointment. Sales against advance payment are ex works, without warranty or guarantee.

Condition: ready for operation (used), Year of construction: 2003, Baling press Hsm 500.2 vl Four-fold bale tying with wire Dkeln E S Hsra Ak Ejvjl Bale dimensions: L x W x H (mm): 1200 x 800 x 1000 - 1200 Bale weight (kg): approx. 500 kg Technical data: L x W x H (mm): 1213 x 1824 x 2987 Loading opening (mm): 1200 x 565 Cycle (sec): 35 Compressive force (T): 54 Power supply (V): 400 (three phases) Year of manufacture 2002-2005 Baling press Hsm V press 500.2 VL Year of manufacture 2006-2008 price 3600eur Transport height: 2600 mm

Condition: used, Year of construction: 2009, Mil-tek waste compactor 509HD 2495 x 1400 x 1040 RA2167 Type: 509 HD Year of manufacture: 2009 Dkjln E Seq Tq U Ns Hvsl Condition: functionally tested, used optical: traces of use Height: 2495 mm Width: 1400 mm Depth: 1040 mm Pressure: 8500 kg at 8 bar Safety valve: 11 bar Waste bale size: 875 x 1250 x 800 mm Automatic bale ejection Own weight: 925 kg Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply get in touch with us. Simply contact us by phone or by mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team of Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: excellent (used), Year of construction: 2002, Functionality: fully functional, pressing force: 15 t, bale weight: 220 kg, bale height: 700 mm, bale width: 700 mm, input voltage: 400 V, power: 4 kW (5.44 HP), net weight: 2,700 kg, Manufacturer: Borg Baling Company Dkjln E Seh Dy Rfj Hvol Type: S-15KK Year of production: 2002 3x400V, 4kW, 14.5A Compression force: 15t Net weight: 2.7 t Bale max. sizes 700x700x1000 mm weight of a bale: ca 120 – 220kg Wide Range of Used Machinery, Industrial Equipment

Condition: good (used), Year of construction: 2013, Functionality: fully functional, pressing force: 42 t, bale weight: 400 kg, HSM VK 4212 Year of production: 2013 Fully automatic press. After a major service, the device was installed with new and fully refurbished most important elements of the press. The machine was also painted. Crush force: 420 kN Unit pressure force: 75 N/cm² Drive power: 22 kW Voltage/frequency: 400V/50Hz Efficiency at 50 kg/m³: 9.05 t/h Bale width x height x length: 700 x 800 x 600-1200 mm Length x width x total height: 7378 x 2882 x 2030 mm Machine weight: 6.3 t Pressed material: foil, mixed paper, cardboard, die cutting machine waste Bale tying: 4-fold with wire We also have other presses in stock. Transport costs depend on weight, volume and, above all, distance, the following information is important for inquiries: Delivery address (postal code and city name), but further details require telephone contact, so please inquire about transport costs and other delivery methods to contact us contact us by phone. Our contact details can be found in the seller's legal information. We sell and export worldwide, and thanks to our very large storage capacity we can also deliver larger quantities flexibly and quickly. We issue intra-Community invoices - without VAT. Djln E Sjwdtr Is Hvjkl opening hours Mon-Fri: 8:00-16:00 Sat: closed

Condition: ready for operation (used), Year of construction: 2002, operating hours: 13,400 h, Technical specifications of horizontal automatic Press Model Konti 275 D Manufacturer: PAAL, Germany Press force: 75t Channel cross-section 75x110 cm. Feed opening 102x155 cm. Filling volume approx. 2.0 m3 Binding vertically 5 wires Drive power 37 kW Dkslewb H Tgjn E S Hvjl Material throughput • Density 35 kg/m3 9.5 tonnes/hour. • Density 60 kg/m3 16.5 tonnes/hour. • Density 100 kg/m3 26 tonnes/hour. Bale weight from 500 to 750 kg. Adjustable bale length Bale size (WxH) 75 x 1100 mm Press weight 25 tonnes Press dimensions see brochure Year of manufacture 1997. Operating hours, approx. 40,000 hours

Condition: excellent (used), Year of construction: 2021, Functionality: fully functional, pressing force: 5 t, filling opening width: 810 mm, filling opening length: 710 mm, bale length: 695 mm, total width: 920 mm, total height: 2,410 mm, total length: 940 mm, bale height: 600 mm, bale width: 510 mm, noise level: 60 dB, power: 1.1 kW (1.50 HP), We have a lot of brand new or used CK International balers CK51, CK101, CK100VX, CK250, CK300VX and more on our stock. Dkoln Ejvy Drxo S Hvsl Please contact us and to get a quote.

Condition: ready for operation (used), Baler Model HSM V-press 1160 plus Pressure (kN) 532 Efficiency (bales/h) 1-2 Djln Esra Nyue S Hvskl Max. bale size (mm) 1200x1100x1000-1200 Dimensions L x W x H (mm) 1780x1150x2985 Power (kW) 7.5 Year 2007-2008 price 5300eur Year 2009-2010 price 5600eur Year 2011-2013 price 6300eur Weight (kg) 2300 ALSO AVAILABLE YEARS 20017- 2018 - 7500eur

Condition: good (used), Manufacturer: Comp Dkslnsh Eic Ao E S Hvjl Tip: SB5 Engine: 2,2 KW Cylinder stroke length: 500 mm Chamber size: 500 x 350 x 400 mm

Condition: good (used), Year of construction: 1985, Functionality: fully functional, pressing force: 50 t, bale weight: 500 kg, bale length: 1,000 mm, bale height: 750,750,750 mm, bale width: 750 mm, input voltage: 400 V, overall weight: 7,500 kg, oil tank capacity: 500 l, power: 30 kW (40.79 HP), net weight: 7,500 kg, input frequency: 50 Hz, Manufacturer: Paal Typ: Pacomat V Dkolsic Rl Djn E S Hvel Year of construction: 1985 Press power main press: 50 t Specific press capacity: 5 kg/cm² Feed channel: 1.000 x 720mm (l x w) Theoretic throughput rate: 200 cbm/h Bale size: 700 x 1.000 mm (w x h) length adjustable Driving motor: 30 kW Bale weight: approx. 500 kg Machine weight: approx. 8t The hydraulic unit is functional, the drive motor is in the removed state.

Condition: excellent (used), Year of construction: 2014, Functionality: fully functional, pressing force: 60 t, bale weight: 450 kg, DIXI 60 SLD horizontal press baler 2014 year of production Semi-automatic 60 ton press system for economical volume reduction of residual (recyclable) materials in industry and retail: Cardboard Tetra Packs foils Foams PET bottles Insulating mats and other compressible materials. Dkolnowdtrze E S Hvol Machine dimensions L x H x W approx. mm: 4150 (5080) x 1725 x 2035 Filling opening W x H (standard) mm: 990 x 1110 Machine weight approx. kg: 5420 Pressing force max. kN: 60 t / 600 kN Ironing cycle (average value) approx. s: 47 Bale size W x H x L approx. mm: 800 x 1100 x 1200 Bale weight (depending on material) approx. kg: 370-410 Binding: manual Number of ties: 3, with wire Drive power: 7.5 kW; 400V/32A Freight costs depend on the weight, volume and above all on the distance, the following information is relevant for inquiries: Delivery address (postcode and name of the town), but further details require a telephone call, so we ask you to inquire about transport costs and other delivery modalities to contact us by phone. Our contact details can be found under the legal information of the seller. We sell and export worldwide, due to our very large storage capacity we can also deliver larger quantities flexibly and quickly. We issue intra-community invoices - excluding VAT. Opening hours Mon-Fri: 8 a.m.-4 p.m. sat .: closed

Condition: used, Year of construction: 2014, pressing force: 122 t, overall weight: 40,000 kg, pressure: 315 bar, Machine has been used but is surplus and therefore for sale! Dkjlewa N U Den E S Hvol

Condition: used, Year of construction: 2001, power: 4 kW (5.44 HP), The Strautmann PP 1207 Baler Potential recyclable materials: Cardboard, film, PET bottles, foam, cans, electronic waste Djlnewc Rv Us E S Hvskl Technical details: Manufacturer: Strautmann Type: PP 1207 Bale size (LxWxH): 1200 x 700 x 800 mm Bale weight: approx. 400 - 500 kg External dimensions (LxWxH): 1844 x 1067 x 2868 mm Transport height: 1970 mm Filling opening: 1145 x 430 mm Pressure: 580 kN Throughput: 1 - 2 bales / hour Number of belt channels: 4 Baler weight: 2200 kg Power supply: 400 V / 50 Hz Power consumption: 4 kW Installation location: indoors / outdoors Covered Noise level: under 80 dB(A) Year of construction: 2001

Condition: excellent (used), operating hours: 2,658 h, Functionality: fully functional, pressing force: 71 t, bale weight: 600 kg, filling opening width: 1,000 mm, filling opening length: 1,620 mm, bale height: 720 mm, bale width: 1,100 mm, oil tank capacity: 1,250 l, net weight: 29,000 kg, nominal current: 200 A, Technical data baler: Manufacturer BOA Recycling Systems B.V. Type M75-45-A-5-1.6 Ecoline Year of construction 2021 Hours of operation 2,658 hours (as of May 2024) Number of pressed bales 42,212 pieces (as of May 2024) Press power main press 71,2 kN (71 t) Specific press capacity 9 kg/cm² Operating pressure 280 bar Cylinder stroke 2,200 mm Feed channel 1,620 x 1,000 mm Capacity per cycle time 2,4 m³ Theoretic cycle time 21 seconds Theoretic throughput rate 450 m³/hour Bale size 1,100 x 720 mm, length variably adjustable up to 1,400 mm Driving motor 45 kW Connected load 100 kW Current consumption 200 A Tying system 5-fold vertical, fully automatic, the press stamp is prepared for an additional 3-fold horizontal binding Throughput rate at a bulk weight of 30 kg/cbm approx. 13,6 tons/hour bulk weight of 50 kg/cbm approx. 24,2 tons/hour bulk weight of 100 kg/cbm approx. 36,4 tons/hour bulk weight of 150 kg/cbm approx. 54,7 tons/hour Bale weight up to 600 kg, depends on material Volume hydraulic oil tank 1,250 l SPS controller Siemens S7 1500 Operating panel Siemens SIMATIC HMI TOUCH Transport dimensions of press 10,000 x 2,800 x 3,385 mm (l x w x h) Press height set up with feed chute 4,743 mm Press height with conveyor belt 7,123 mm Dksln Esu Thcve S Hvjl Machine weight baler approx. 29 tons Noise level <85 dB (A) Condition of the baler: With 2,658 operating hours, the press is almost as good as new and in very good condition, has hardly any signs of wear and is ready for immediate use. Due to larger material input quantities, the pressing force and throughput of the machine no longer meet the customer's current requirements and is therefore being replaced by a new 120 tonne baler. Only the baler is for sale, without conveyor belt and wire drawing stations. Comments: The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: excellent (used), Year of construction: 2013, Functionality: fully functional, pressing force: 60 t, bale weight: 450 kg, DIXI 60 SLD horizontal press baler 2013 year of production Very good condition of the device - constantly serviced by an authorized service. The press has one factory new actuator installed. Ready for use. Dksln Eowcwg To S Hvol Perfect cutting range of the press stamp. Number of bales made: 4028 Semi-automatic 60 ton press system for economical volume reduction of residual (recyclable) materials in industry and retail: Cardboard Tetra Packs foils Foams PET bottles Insulating mats and other compressible materials. Machine dimensions L x H x W approx. mm: 4150 (5080) x 1725 x 2035 Filling opening W x H (standard) mm: 990 x 1110 Machine weight approx. kg: 5420 Pressing force max. kN: 60 t / 600 kN Ironing cycle (average value) approx. s: 47 Bale size W x H x L approx. mm: 800 x 1100 x 1200 Bale weight (depending on material) approx. kg: 370-410 Binding: manual Number of ties: 3, with wire Drive power: 7.5 kW; 400V/32A Freight costs depend on the weight, volume and above all on the distance, the following information is relevant for inquiries: Delivery address (postcode and name of the town), but further details require a telephone call, so we ask you to inquire about transport costs and other delivery modalities to contact us by phone. Our contact details can be found under the legal information of the seller. We sell and export worldwide, due to our very large storage capacity we can also deliver larger quantities flexibly and quickly. We issue intra-community invoices - excluding VAT. Opening hours Mon-Fri: 8 a.m.-4 p.m. sat .: closed

Condition: good (used), Year of construction: 2019, operating hours: 2,320 h, Functionality: fully functional, pressing force: 60 t, filling opening width: 1,100 mm, filling opening length: 1,400 mm, bale height: 1,100 mm, bale width: 720 mm, overall weight: 12,500 kg, oil tank capacity: 800 l, power: 37 kW (50.31 HP), Technical data baler: Manufacturer Riko Ekos d.o.o Type S-60K (6) Year of construction 2019 Operating hours 2,320 hours, as of August 24 Number of pressed bales 4,359 bales, as of August 24 Pressing force main press 60 tonnes Dimensions of feed chute 1,100 x 1,400 mm Filling volume / pressing cycle 2.1 m³ Bale dimensions 720 x 1,100 mm (W x H), the length is variable Drive power 37 kW Connected load, total 47 kW Tying 4-fold horizontal, fully automatic Throughput capacity with a bulk density of 30 kg/cbm approx. 5 - 6 tonnes/hour Bulk weight of 50 kg/cbm approx. 9 - 11 tonnes/hour Bulk weight of 100 kg/cbm approx. 15 - 19 tonnes/hour Filling volume of hydraulic oil tank 800 litres PLC control Siemens SIMATIC S7-1200 Siemens SIMATIC HMI control panel Press dimensions assembled without hopper and chute 12,220 x 3,654 x 2,685 mm (L x W x H) Effective transport dimensions excluding press, with dismantled tying system 7,230 x 1,750 x 2,685 mm (L x W x H) Transport weight press 12.5 tonnes Dkjlneu Thipe E S Hvel Condition of the baler: The machine is part of a sorting line and was only partially used for pressing individual material flows. The machine is now no longer needed and has therefore been sold. However, the baler is regularly put into operation once a week for two to three bales so that the machine remains in working order. Due to the extremely low operating hours, the baler is in good condition and ready for immediate use. Scope of delivery for the baler: 1 piece baler without conveyor belt, hopper and chute 8 pieces wire pulling stations, without wire 1 piece bale chute 1 set of machine documentation Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, Functionality: fully functional, pressing force: 100 t, bale weight: 1,400 kg, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale height: 1,100 mm, bale width: 1,100 mm, overall weight: 36,000 kg, oil tank capacity: 1,300 l, nominal current: 238 A, For sale is a overhauled baler, with 100 tonnes pressing force, large format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K / 75 kW Year of construction 2007 Press power main press 100 tons Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm Driving motor 75 kW Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight up to 1400 kg, depends on material and bale lenght Dsljvf E Avon E S Hvokl Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Machine weight baler approx. 36 tons Comments: The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. The following overhaul work was carried out: Rust removal and partial painting of the press. Remaining hydraulic oil tank drained, oil filter and air filter replaced. New hydraulic oil topped up. All hydraulic hoses replaced. Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Both bearings of the shaft of the prepress flap replaced. Upper material deflector on the frame of the prepress flap replaced. Press ram dismantled, checked and both front rollers replaced. Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. General maintenance and service work carried out in accordance with the manufacturer's specifications. Press was tested in manual and automatic mode, accepted and stored after completion of overhaul work. We accept no liability for the technical specifications or any errors.

Condition: good (used), Year of construction: 2015, operating hours: 19,173 h, Functionality: fully functional, pressing force: 150 t, filling opening width: 1,100 mm, filling opening length: 2,000 mm, bale height: 750 mm, bale width: 1,100 mm, overall weight: 35,800 kg, oil tank capacity: 4,300 l, Technical data baler: Manufacturer Europress Umwelttechnik GmbH, Germany Type EP5 150 V5 Year of construction 2015 Operating hours 19,173 hours Number of pressed bales 282,961 bales Number of press strokes from the press ram 1,895,112 press strokes Pressing force of main press 150 t Specific pressing force 181.8 N/cm² Dimensions of feed chute 1,000 x 2,000 mm (w x l) Bale dimensions 750 x 1,100 mm (h x w), length variable Drive power 2 x 55 kW + 15 kW + 2 x 0.75 kW Rated current 230 A Djln Eou Thfds S Hvjkl Cable cross-section supply 120 mm² Tying 5-fold vertical, fully automatic Hydraulic oil tank capacity 4,300 l PLC control Siemens S7 / ET200S Transport weight press 35,800 kg Special equipment: Base plates and side walls made of HARDOX steel Free tamper in front of the counter blade, with cleaning cycle Scope of delivery: 1 piece baler 1 piece control cabinet 1 set of oil collecting pans under the baler 1 piece maintenance platform on the baling channel 1 piece Feed hopper 1 piece Drop chute 10 pieces wire reel stands 2 pieces wire drawing stations with deflection rollers 1 set of machine documentation (operating instructions, electrical circuit diagram, hydraulic circuit diagram, CE confirmation) Remarks: The machine is still completely assembled and available at short notice. Dismantling and loading is the responsibility of the buyer. The documentation (operating instructions, electrical circuit diagram, hydraulic circuit diagram, CE confirmation declaration) is available in German. An inspection is possible by arrangement. We do not assume any liability for the technical data and possible errors.

Condition: reconditioned (used), Year of construction: 2005, operating hours: 30,408 h, Functionality: fully functional, pressing force: 50 t, bale weight: 550 kg, filling opening width: 1,100 mm, filling opening length: 1,250 mm, bale height: 720 mm, bale width: 1,100 mm, overall weight: 16,000 kg, oil tank capacity: 600 l, year of last overhaul: 2024, Technical data baler: Manufacturer Presona AB Type LP 50 EH1 Year of construction 2005 Operating hours 30,408 hours, as of April Number of pressed bales 198,059 as of April Pressing force main press 50 tonnes Specific pressing force 63 N/cm² Theoretical throughput capacity 530 m³/hour Throughput capacity under operating conditions 260 m³/hour Dimensions of feed chute 1,250 x 1,100 mm Dksln E S Hju Thhrevjl Bale chamber volume 2.2 m³ Bale dimensions 1,100 x 720 mm, variable length Drive power 22 kW Tying 5-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm 6 up to 7 tonnes/hour Bulk weight of 50 kg/cbm 7 up to 9 tonnes/hour Bulk weight of 100 kg/cbm 11 up to 14 tonnes/hour Bale density (paper/newspapers) 400 to 550 kg/m³ Hydraulic oil tank capacity 600 litres PLC control Telemecanique TSX Micro Schneider Magelis control panel Effective transport dimensions excl. baler 8,125 x 2,300 x 3,000 mm (L x W x H) Transport weight press approx. 16 tonnes Condition of the baler: The machine was partially overhauled in our workshop and general maintenance work was carried out. After completion of the overhaul work, the press was tested during operation and is available for sale at short notice. Scope of delivery: Only the baler will be sold. The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: good (used), Year of construction: 2010, operating hours: 3,641 h, Functionality: limited functionality, pressing force: 36 t, filling opening width: 1,100 mm, filling opening length: 1,080 mm, bale height: 750 mm, bale width: 1,100 mm, power: 15 kW (20.39 HP), net weight: 4,000 kg, volume flow: 90 m³/h, Technical data baler: Manufacturer Presto GmbH & Co. KG Typ CC 36 M Year of construction 2010 Hours of operation 3,641 h Press power main press 36 t Specific press capacity 467 N/cm² Feed channel 1.080 x 1100 mm (l x w) Cycle time 34 sec. Dksleu Thh Esn E S Hvol Capacity per cycle time 0,85 m³ Theoretic throughput rate 90 m³/h Throughput rate under operating conditions with a material bulk density of 35 kg/m³ approx. 51 m³/hour Bale size 1100 x 750 mm (w x h), length variable Driving motor 15 kW Tying 4-fold vertical, semi-automatic, with polyester synthetic yarn Throughput rate at a bulk weight of 35 kg/cbm 1,8 to/h bulk weight of 60 kg/cbm 2,5 to/h bulk weight of 100 kg/cbm 3,1 to/h Transport dimensions only baler 4.200 x 1.640 x 2.200 mm Machine weight baler approx. 4 to Comments: The press was checked for function in our workshop, then stored and is therefore available at short notice. The machine documentation (operating ins3.641tructions, CE, electrical and hydraulic circuit diagram) is available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: excellent (used), Year of construction: 2014, operating hours: 5,059 h, Functionality: fully functional, pressing force: 48 t, bale weight: 550 kg, filling opening width: 1,020 mm, filling opening length: 1,250 mm, total height: 2,800 mm, bale height: 750 mm, bale width: 1,100 mm, overall weight: 12,000 kg, transport height: 2,800 mm, oil tank capacity: 300 l, power: 30 kW (40.79 HP), net weight: 12,000 kg, volume flow: 332 m³/h, nominal current: 59 A, Technical information baler: Dkjln E S Hovtpq Hovjl Manufacturer HSM GmbH + Co. KG Typ VK 4812 Year of construction 2014 Hours of operation 5,059 hours, stand November 2024 Press power main press 48 tons Specific press capacity 58,2 N/cm² Feed channel 1,250 x 1,020 mm Theoretic cycle time 11.2 sec. Theoretic throughput rate 332 m³/hour Bale size 1,100 x 750 x 600 up to 1,200 mm Driving motor 30 kW Connected load 32 kW Rated current 59 A Tying system 4-fold horizontal, fully automatic Throughput rate at a bulk weight of 20 kg/cbm up to 6 tons/hour bulk weight of 50 kg/cbm up to 13 tons/hour Bale weight up to 550 kg, depends on material SPS controller Siemens SIMATIC S7-200 Operating panel Siemens HMI Touch Panel Filling quantity hydraulic oil tank 300 L Oil type HVI 46 Machine installation dimensions with bale chute 10,046 x 4,387 x 2,705 mm (l x w x h) Transport dimensions baler 8,500 x 2,500 x 2,750 mm (l x w x h) Machine weight press approx. 12 t Scope of delivery: Baler HSM VK 4812, without hydraulic oil, without conveyor system. Two wire reel boxes for 8 pieces 40 kg wire reels, without wire Bale chute Machine documentation in German Comments: The press is equipped with an oil cooler and potential-free contacts for external control. The control cabinet is operated from the left in the direction of pressing, the needle unit is located on the right-hand side and can be folded back for transport. The press is in good condition, is currently still in operation and is used in a distribution warehouse for film compaction. In the 14th calendar week, the baler will be dismantled and replaced with a new, larger machine and will then be available for loading. A truck with an effective internal height of 2,800 mm is required to transport the baler. The press is loaded without hydraulic oil. The conveyor technology shown in the photos is not for sale and is not included in the scope of delivery. The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagrams) is available in German. Viewing is possible by appointment. We accept no liability for the technical details or any errors.

Condition: reconditioned (used), Year of construction: 1996, Functionality: fully functional, pressing force: 170 t, filling opening width: 1,020 mm, filling opening length: 1,800 mm, bale height: 1,100 mm, bale width: 1,100 mm, overall weight: 40,000 kg, oil tank capacity: 3,000 l, year of last overhaul: 2024, For sale is a used baling press system consisting of a chain belt conveyor for underfloor operation, with a feed hopper, a hydraulic pre-compactor with whirlulator, a MACPRESSE 111A baling press, two complete wire drawing frames with 5 wire reel stands each, without wire. Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 111A Year of construction 1996, refurbished in 10/2024 Press power main press 170 tons Specific press capacity 14 kg/cm² Feed channel 1,800 x 1,020 mm Filling volume 2,5 cm³ Theoretic throughput rate 750 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 55 kW Tying system 5-fold horizontal, full automatic Deln E S Hou Th D Rsvokl Throughput rate at a approx. 30 up to 35 tons/h, depends on material Volume hydraulic oil tank 3,000 l Transport dimensions of press with new machine feets 113,700 x 2,300 x 2,900 mm (l x w x h) Machine weight baler approx. 40 tons Comments: The baler was partially overhauled in our workshop and tested after completion of the work, please look at our functional video. The system was previously used to bale paper and cardboard from municipal collections. The contract was awarded elsewhere after the end of the contract period, so the complete system is for sale. The overhaul work carried out and the spare parts replaced can be found in the detailed photo documentation and in our quotation. The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors. Technical data conveyor belt: Manufacturer Wagensfeld B.V. Type chain belt conveyor 1700 mm Year of construction 2017 Drive power 7.5 kW Belt speed 14 m/minute Length of infeed conveyor 6,900 mm Length of ascending belt 12,885 mm Length of gooseneck 1,747 mm Overall length 21,271 mm Pitch 32° Effective width 1,644 mm Height of drive shaft above ground 5,777 mm Wall height of feed conveyor 500 mm Wall height of ascending conveyor 880 mm Steel flights height 40 mm Distance between flights 1200 mm Transport dimensions conveyor disassembled 15,005 x 2,503 x 2,435 mm (l x w x h) Pit dimensions 11,500 x 2,700 x 1,015 mm (l x w x d) Remarks: The chain belt conveyor, built in 2017, was later made to fit the baler during the last installation of the baler in the Netherlands and is newly installed. The conveyor belt is in good, operational condition and has therefore not been overhauled. An installation drawing with the pit dimensions is available. Scope of delifery: 1 chain belt conveyor, Wagensveld B.V. 1 piece feed hopper with pre-compressor flaps 1 piece wirbulator 1 baler MACPRESSE, type 111A 2 wire drawing frames with wire reel stands, without wire 1 operating manual with CE declaration, electrical and hydraulic circuit diagram

Condition: good (used), Year of construction: 1994, operating hours: 51,551 h, Functionality: fully functional, pressing force: 78 t, bale weight: 850 kg, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale height: 720 mm, bale width: 1,100 mm, overall weight: 24,000 kg, oil tank capacity: 900 l, A complete baling system is for sale, consisting of a conveyor belt with feed hopper, the baling press with bale chute and wire pulling stations, without wire. Technical data baler: Manufacturer Bollegraaf Recycling Machinery B.V. Type HBC 80 AF Year of construction 1994, overhauled by the manufacturer Bollegraaf 2003 Operating hours 51,551 hours, as of December 2024 Number of pressed bales 613,446 pieces, as of December 2024 Main press pressing force 78 tonnes Pre-press pressing force 45 tonnes Dimensions of feed chute 1,500 x 1,100 mm (l x w) Filling volume / pressing cycle 2.9 m³ Theoretical cycle time 22 seconds Throughput capacity under operating conditions 300 - 450 m³/hour Bale dimensions 1,100 x 720 mm (w x h), the length is variable Drive power 45 kW Connected load, total 60 kW Tying 5-fold vertical, fully automatic Throughput capacity with a bulk density of 30 kg/cbm approx. 10 tonnes/hour Bulk weight of 50 kg/cbm approx. 18 tonnes/hour Bulk weight of 100 kg/cbm approx. 30 tonnes/hour Throughput in whirling mode approx. 20 tonnes/hour Bale weights with a bale length of approx. 1.2 m approx. 550 - 850 kg Hydraulic oil tank capacity 900 litres SPS control manufacturer Schneider Electric Transport weight of baler approx. 24 tonnes Accessories: Conveyor belt with feed chute, bale chute and wire pulling stations Condition of the baler: Dkjln E Sevf E Das Hvol The machine was completely overhauled by the manufacturer Bollegraaf in 2003 and later fitted with a new PLC control system from Schneider Electric. The baler was used to compress dried grass into bales. Despite its age, the entire system, including the conveyor belt, is in really good condition and has been regularly serviced. The system is still fully assembled, connected to the power supply and can be inspected during operation without the use of materials. Scope of delivery for the baler: Baling press with conveyor belt, feed hopper, wire drawing stations and bale chute. Comments: Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: excellent (used), Year of construction: 2012, operating hours: 18,593 h, Functionality: fully functional, pressing force: 140 t, bale weight: 1,300 kg, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale height: 1,100 mm, bale width: 1,100 mm, overall weight: 47,000 kg, nominal current: 470 A, Technical data baler: Manufacturer Bollegraaf Typ HBC 140 K Year of construction 2012 Working hours 18.593 hours, stand September 2024 Press power main press 140 tons Press power of pre-press 70 tons Feed channel 1,600 x 1,100 mm Capacity per cycle time 4,34 m³ Theoretic cycle time 16 sec. Bale size 1,100 x 1,100 mm Driving motor 2 x 75 kW Connected load 248 kW Full load current 470 A Tying system 5-fold vertical, fully automated Throughput rate at a Dksln E S Heu Thy Esvel bulk weight of 30 kg/cbm approx. 30 tons/h bulk weight of 50 kg/cbm approx. 46 tons/h bulk weight of 100 kg/cbm approx. 82 tons/h Bale weight 800 up to 1300 kg, depends on material and bale lenght SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Baler dimensions built up with hopper 13,200 x 2,750 x 7,344 mm (l x w x h) Transport dimensions only baler 13.200 x 2.750 x 3.450 mm (l x w x h) Machine weight baler approx. 47 tons Special equipment: 2-flap pre-compressor for large cardboard boxes and octatainers Wirbulator for magazines and books Comments: The press is currently in operation and is to be replaced by a new machine in the second calendar week of 2025. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: good (used), Year of construction: 2019, operating hours: 673 h, Functionality: fully functional, pressing force: 60 t, filling opening width: 1,100 mm, filling opening length: 1,400 mm, bale height: 1,100 mm, bale width: 720 mm, overall weight: 12,500 kg, oil tank capacity: 800 l, power: 37 kW (50.31 HP), Technical data baler: Manufacturer Riko Ekos d.o.o Type S-60K (5) Year of construction 2019 Operating hours 673 hours, as of August 24 Number of pressed bales 1,127 bales, as of August 24 Pressing force main press 60 tonnes Dimensions of feed chute 1,100 x 1,400 mm Doln E S Hsu Thicsvekl Filling volume / pressing cycle 2.1 m³ Bale dimensions 720 x 1,100 mm (W x H), the length is variable Drive power 37 kW Connected load, total 47 kW Tying 4-fold horizontal, fully automatic Throughput capacity with a bulk density of 30 kg/cbm approx. 5 - 6 tonnes/hour Bulk weight of 50 kg/cbm approx. 9 - 11 tonnes/hour Bulk weight of 100 kg/cbm approx. 15 - 19 tonnes/hour Filling volume of hydraulic oil tank 800 litres PLC control Siemens SIMATIC S7-1200 Siemens SIMATIC HMI control panel Press dimensions assembled without hopper and chute 12,220 x 3,654 x 2,685 mm (L x W x H) Effective transport dimensions excluding press, with dismantled tying system 7,230 x 1,750 x 2,685 mm (L x W x H) Transport weight press 12.5 tonnes Condition of the baler: The machine is part of a sorting line and was only partially used for pressing individual material flows. The machine is now no longer needed and has therefore been sold. However, the baler is regularly put into operation once a week for two to three bales so that the machine remains in working order. Due to the extremely low operating hours, the baler is in good condition and ready for immediate use. Scope of delivery for the baler: 1 piece baler without conveyor belt, hopper and chute 8 pieces wire pulling stations, without wire 1 piece bale chute 1 set of machine documentation Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.