Used Haas Vf-3 for sale (15)

Condition: used, Year of construction: 2011, HAAS VF-3 Vertical Machining Centre (2011), Traverses X Y Z: 1016 x 508 x 635mm, Table 1200mm x 460mm, Spindle Speed 0 – 7,500rpm, Spindle Taper BT40, Spindle Motor 20Hp, HAAS Control, 40 Station Side Arm ATC, Through Spindle Coolant, Low Volt Light. S/No. 1083369. Country of Origin: U.S.A. Godpfx Ae Ah Hbcsgljkd Location: This lot is located in Leicester, UK. A charge of £250 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: excellent (used), Year of construction: 2013, operating hours: 7,100 h, functionality: fully functional, HAAS control with LCD screen and USB interface Table dimensions: 1219 x 457 mm Max. table load: 1588 kg T-slots in table: 16 x 80 x 5 mm X-axis: 1016 mm Y-axis: 508 mm Z-axis: 635 mm Distance from spindle nose to machine table: 107 - 742 mm Spindle speed: 8100 rpm Drive power: 22.4 kW Rapid traverse X/Y/Z = 24.5 m/min Tool changer: 20-fold (or 20-station) Weight: 5320 kg Dimensions LxWxH = 3400 x 2400 x 2600 mm Equipment, Accessories - Coolant system - Chip auger - RENISHAW zero-point probing system with OMP60 probe - RENISHAW tool setter (not mounted) - Machine feet Gsdpfxjz R Alts Agljkd - Documentation The machine has been used very little and is in very good condition. It is still under power in Hungary. First owner. It was purchased as new in Hungary and has not run long hours.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, controller manufacturer: Haas, total height: 2,500 mm, total length: 3,500 mm, total width: 2,800 mm, table width: 450 mm, table length: 1,200 mm, overall weight: 6,000 kg, number of spindles: 1, number of slots in tool magazine: 20, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, A Haas VF3 CNC vertical machining center is available. X/Y/Z axis travels: 1010mm/508mm/635mm, table dimensions X/Y: 1200mm/450mm, maximum table load: 1500kg, rapid traverse rate: 25m/min, feed rate: 16m/min, number of tool positions: 20, machine dimensions X/Y/Z: approx. 3500mm/2500mm/2800mm, weight: approx. 6000kg. On-site inspection is possible, and the machine can be powered on. Godszu Dfdjpfx Aglokd

Condition: used, Year of construction: 2014, operating hours: 7,500 h, 5-AXIS MACHINING CENTER Gsdpfxjzminnj Aglekd BRAND: HAAS VF-3 SS YEAR OF FIRST INSTALLATION: 2014 TABLE DIMENSIONS: 1,219 mm x 457 mm MAXIMUM TABLE LOAD: 800 KG TRAVEL: X: 1,016 mm Y: 508 mm Z: 635 mm SPINDLE SPEED: 12,000 RPM TOOL MAGAZINE: 40 POSITIONS HIGH PRESSURE / INTERNAL SPINDLE COOLING RENISH PROBE PRESETTING ADJUSTABLE COOLANT NOZZLE

Condition: excellent (used), Year of construction: 2009, operating hours: 3,262 h, functionality: fully functional, machine/vehicle number: 1072682, overall weight: 6,000 kg, HAAS VF-3SSHE CNC vertical machining center, manufactured in January 2009, available for sale. Condition: Excellent condition, fully operational, all inspections / services done. Visible features and equipment: Gsdez Ag Nujpfx Aglskd • Inline direct-drive spindle • Maximum spindle speed: 12,000 rpm • High-speed tool changer • Through-spindle coolant (TSC) • Electrical supply: 360–480 V, three-phase, 50/60 Hz • HAAS CNC control Recorded operating hours: • Power On Time: 3,262 h 57 min • Cycle Start Time: 1,251 h 29 min • Feed Cutting Time: 1,103 h 02 min • M30 cycle count: 5,815 h The machine can be inspected in Baia Mare, Romania. Price: 38.500 EURO Price does not include tools and spare parts.

Condition: good (used), Year of construction: 2011, Haas VF-3YT/50 vertical machining center, manufactured in 2011. Gkede Ahxqyjpfx Agled

Condition: good (used), Year of construction: 2007, HAAS VF-3BHE vertical machining center, 5-axis Year of manufacture: 2007 Godpfx Ags Ahn N Uolskd Specifications: Axis travel: X-1016mm, Y-508mm, Z-635mm Table: 1219 mm x 457mm Table load: 1814 kg Spindle taper: SK40 Spindle speed: 10000 rpm Distance from spindle nose to machine table: 107 - 742 mm Drive power: 22.4 kW Rapid traverse X/Y/Z = 24.5 m/min Tool changer capacity: 40 positions Weight: 6500 kg Dimensions LxWxH = 3400 x 2400 x 2600 mm Accessories/options: - 4/5 axis, TR210 rotary/tilting table - Renishaw OMP40 touch probe - Renishaw TS27 tool measuring unit - Swarf conveyor - Programmable coolant nozzle - Automatic door opening closing PLC possibility - Tool holders with tools, 17 pieces - Coolant tank Run time: 12233 hours Tool changes: 208476 Under power in our warehouse, possible to test it anytime!

Condition: excellent (used), Year of construction: 2017, HAAS VF-3SS vertical machining center Year: 2017 Gsdo Af Ncwjpfx Aglskd Technical details: X-axis travel 1016 mm, Y-axis travel 508 mm, Z-axis travel 635 mm, Table size of 1219 x 457 mm, Spindle 12000 rpm ATC 24 positions Spindle type SK40 Accessories/options: Renishaw touch probe Renishaw TS27 tool measuring Swarf conveyor Through spindle coolant Software options Under power ihnspection is available at anytime!

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 1,016 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, controller manufacturer: HAAS, total height: 2,692 mm, total width: 2,794 mm, overall weight: 5,670 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 224,000 W, number of slots in tool magazine: 24, tool weight: 5,400 g, product length (max.): 2,235 mm, number of axes: 3, This 4-axis HAAS VF-3SS was manufactured in 2017. It features an X-axis travel of 1016 mm, Y-axis travel of 508 mm, and Z-axis travel of 635 mm. The machine includes a table size of 1219 x 457 mm and can support a maximum part weight of 794 kg. If you are looking to get high-quality machining capabilities, consider the HAAS VF-3SS vertical machining centre we have for sale. Contact us for further details. • Table size: 1219 x 457 mm Gksdpfxjz E Sy Uo Aglod • Max part weight on table: 794 kg • max torque 122 Nm • Tool capacity limits: max diameter (all tools) 76 mm; max diameter (adjacent position empty) 127 mm; max length 330 mm • Power supply: 3x400 V, 50 Hz

Condition: ready for operation (used), A Haas CNC vertical milling center is available. Travel X/Y/Z: 1010mm/508mm/635mm, table dimensions X/Y: 1200mm/450mm, max. table load: 1500kg, rapid traverse: 25m/min, feed rate: 16m/min, tool stations: 20, machine dimensions X/Y/Z: approx. 3500mm/2500mm/2800mm, weight: approx. 6000kg. An on-site inspection is possible. Gjdpfx Ageyv H Hisljkd

Condition: ready for operation (used), Year of construction: 2017, operating hours: 3,163 h, travel distance X-axis: 1,016 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, controller manufacturer: HAAS, table load: 794 kg, spindle speed (max.): 12,000 rpm, number of axes: 3, This 3-axis HAAS VF-3SS was manufactured in 2017 and features a robust Haas CNC Control. It offers X-axis travel of 1,016 mm, Y-axis travel of 508 mm, and Z-axis travel of 635 mm. The machine supports a spindle speed of 12,000 rpm and a rapid traverse of 30.5 m/min. If you are looking to get high-quality milling capabilities, consider the HAAS VF-3SS machine we have for sale. Contact us for more information. • Machine hours (as shown on the screen): Gjdpfx Agex D I Stelokd • Power On: 25,416 h • Cycle Start: 8,164 h • Table: • Size: 1,372 × 457 mm • Tool changer: 30+1 positions (side-mount) • CNC control: Haas CNC Control

Year of construction: 2010, condition: ready for operation (used), Travel X/Y/Z: 1016mm/508mm/635mm, speed: 10000rpm, table dimensions X/Y: 1219mm/457mm, max. table load: 1550kg, tool positions: 20, rapid traverse X/Y/Z: 25m/min/25m/min/25m/min. Machine dimensions X/Y/Z: approx. 4000mm/2800mm/2600mm, weight: approx. 5400kg. Documentation available. On-site inspection is possible. Gkedju T Rgqepfx Aglsd

Condition: ready for operation (used), Year of construction: 2019, operating hours: 4,456 h, functionality: fully functional, machine/vehicle number: 1163744, travel distance X-axis: 1,016 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, workpiece weight (max.): 1,814 kg, spindle speed (max.): 10,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel, X-axis: 1,016 mm Travel, Y-axis: 660 mm Travel, Z-axis: 635 mm Spindle speed: 10,000 rpm Rapid traverse rate, X-axis: 18,000 mm/min Rapid traverse rate, Y-axis: 18,000 mm/min Rapid traverse rate, Z-axis: 18,000 mm/min Feed length, X-axis: 1,016 mm Feed length, Y-axis: 660 mm Feed length, Z-axis: 630 mm Feed rate, X-axis: 12,700 mm/min Feed rate, Y-axis: 12,700 mm/min Feed rate, Z-axis: 12,700 mm/min Workpiece length (max.): 1,370 mm Workpiece width (max.): 610 mm Workpiece height (max.): 630 mm Workpiece weight (max.): 1,814 kg Table width: 610 mm Table height: 630 mm Table length: 1,372 mm Table load capacity: 1,814 kg Number of tool positions in the tool magazine: 30 MACHINE DETAILS Operating hours: 20,865 h (as of July 26, 2026) Machining hours: 4,456 h (as of July 26, 2026) Cycle hours: 6,745 h (as of July 26, 2026) Control system manufacturer: Haas Rated power: 45 kVA Torque: 460 Nm Spindle motor power: 44.7 kW Dimensions (L x W x H): 1,370 x 660 x 630 mm EQUIPMENT Chip conveyor with 4 additional feed screws ISO 50 tool holder 30-position automatic tool changer (ATC) RTAP-3 synchronized thread cutting Gkodpjzlxnhjfx Aglod TSC 300 psi (21 bar) Coolant cooler Programmable coolant nozzle MIN QTY LUBE (minimum quantity lubrication) Automatic air nozzle Air cooling through the spindle Renishaw WIPS High Speed Machining ACF 25-micron filter Control cabinet cooler Mist separator 4th axis pre-wired DWO/TCPC WIFI connection to the local network WIFI camera Automatic door 15 tool holders

Condition: ready for operation (used), Year of construction: 2019, travel distance X-axis: 1,016 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, controller manufacturer: HAAS, table load: 1,814 kg, overall weight: 7,485 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 44,700 W, number of slots in tool magazine: 30, number of axes: 3, This 3-axis HAAS VF-3YT/50 was manufactured in 2019. It features an impressive X-axis travel of 1,016 mm, Y-axis travel of 660 mm, and Z-axis travel of 635 mm. The machine is equipped with a high-performance spindle capable of 10,000 rpm and a 30-position automatic tool changer. If you are looking to get high-quality machining capabilities, consider the HAAS VF-3YT/50 vertical machining centre we have for sale. Contact us for further details. • Condition: Used, fully operational • Operating/cycle hours: 6,744 h • Spindle/cutting hours: 4,454 hTravels • Spindle nose to table: 201–836 mm • Rapid traverse: 18 m/min • Maximum cutting feed: 12.7 m/minSpindle and tool changer • Maximum torque: 460 Nm • Drive system: Vector drive with 2-speed gearbox Gkjdpfx Aozwd Auogled • Tool changer capacity: 30 toolsTable • Table size: 1,372 × 610 mm • T-slots: 7 • T-slot width: 15.9–16 mmShipping • Note: Dimensions listed as 1,370 × 660 × 630 mm are not overall machine dimensions • Export shipping dimensions (approx.): 3,970 × 2,600 × 3,230 mm • Approx. shipping weight: 7,485 kg Additional equipment • Chip conveyor with four additional augers • Haas Chip Lift • Through-Spindle Coolant (TSC), 300 psi / 21 bar • Programmable coolant nozzle • Coolant chiller • ACF 25-micron auxiliary coolant filter • Coolant mist condenser • Minimum Quantity Lubrication (MQL) • Automatic air gun • Through-Tool Air Blast (TAB) • PulseJet system • Renishaw Wireless Intuitive Probing System (WIPS) with probe riser block • Fourth-axis drive and wiring • High-Speed Machining (HSM) • DWO/TCPC (Dynamic Work Offsets/Tool Center Point Control) • RTAP-3 synchronized tapping • Wi‑Fi network connection and Wi‑Fi camera • Automatic door • High-intensity lighting • Approximately 15 tool holders • Complete documentation Technical Specification Taper Size ISO 50

Condition: ready for operation (used), Year of construction: 2015, operating hours: 5,792 h, travel distance X-axis: 1,016 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, controller manufacturer: HAAS, table load: 794 kg, spindle speed (max.): 12,000 rpm, number of axes: 3, This 3-axis HAAS VF-3SS vertical machining center was manufactured in 2015. It features a 1,372 × 457 mm table, a maximum load of 794 kg, and a spindle speed of 12,000 rpm. The machine includes a 30+1 side-mount ATC and a rapid traverse of 30.5 m/min. If you are looking to get high-quality milling capabilities, consider the HAAS VF-3SS machine we have for sale. Contact us for more information about this machine. • Electrical: • Voltage: 354 / 488 V • Phase: 3 • Frequency: 50/60 Hz • Full load: 40 A • Largest load: 70 A • Short circuit interrupting capacity: 10,000 A • Short circuit current: 5,000 A RMS symmetrical • Machine hours (from control): • Power on time: 19,635 h Gsdpfx Ajx D I Smsglokd • Cycle start time: 8,564 h • Table: • Size: 1,372 × 457 mm • Tool changer: 30+1 side-mount ATC • Control unit: Haas CNC Control