Used Felder Edgebander for sale (122)

Condition: like new (used), Year of construction: 2022, machine/vehicle number: 425.10.047.22, functionality: fully functional, We offer this Felder K700 panel saw in like-new condition, year of manufacture 2022. Manufacturer: Felder Model: K700 Year of manufacture: 2022 Condition: like new X-Roll sliding table Scoring unit Duodpfjyzfglox Ahbsw If you have any questions or require additional information, please contact us by message or phone.

Condition: like new (used), Year of construction: 2019, machine/vehicle number: 432.09.257.19, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, input current: 11 A, input frequency: 50 Hz, cutting height (max.): 133 mm, cutting width (max.): 800 mm, saw blade diameter: 400 mm, tilt adjustment saw blade: 45 °, height adjustment type: electric, saw blade bore: 30 mm, actuation type: electric, rotational speed (max.): 5,500 rpm, rotational speed (min.): 3,500 rpm, year of last overhaul: 2022, Equipment: CE marking, documentation/manual, very well maintained, Dedoy Ucp Ropfx Ahbjuw still in daily use.

Condition: good (used), Year of construction: 2016, - Table length (mm): approx. 3000 - Power (kW): 5.5 - Scorer: included - Saw blade: swiveling Dsdey Tm Twopfx Ahbouw

Condition: good (used), Year of construction: 2017, - Milling spindle swivel range: 90 degrees / 45 degrees - Spare milling spindle: included Dujdpfx Ajy Tm Rpjhbjw

Year of construction: 2021, condition: new, functionality: fully functional, A used one is for sale Felder Milling machine F-900 Z with tenoning and slotting table length 1300mm The machine is inot used at all and therefore in mint (new) condition. Technical data: Djdey Iyvnjpfx Ahbsuw - 5 milling speeds - Milling spindle swivels 90° - 45° - Milling stop for tools up to Ø 230mm - Multi-adjustment system - Tapping and slotting table 1300mm - electrically height-adjustable + swiveling "PowerDrive" - Engine power 7,3kW SD start

Condition: excellent (used), Year of construction: 2023, DEMONSTRATION MACHINE! For sale is a used Felder KF 700 SP sliding table saw & spindle moulder with a cutting width of 800 mm. The machine is in excellent condition and has been refurbished and inspected by our professional staff. (Fully functional) Technical data: - Tilting circular saw and spindle moulder 90-45° - Sliding table 2500 mm - Extension table with mitre fence 2600 mm - Rip fence with fine adjustment - Cutting width 800 mm - Spindle fence with multi-adjustment system - 4 spindle speeds - 3 motors, each 7.5 HP (5.5 kW) Dsdpfx Ajy Hgxmehbjuw - Automatic star-delta start The machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: saw, circular saw, spindle moulder, combination machine, combi machine, milling machine Reference: R-D1618

Condition: ready for operation (used), Year of construction: 2020, cutting length (max.): 5,300 mm, cutting depth: 80 mm, This Felder Format 4 Kappa V80 panel saw was manufactured in 2020. It features a powerful 5.5 kW motor, a saw blade diameter of 300 mm, and can handle cutting lengths up to 5300 mm and heights up to 2200 mm. Ideal for precise large-scale panel cutting. Contact us for more information about this machine. • Saw unit motor power: 5.5 kW Dodpsx D D Scefx Ahbouw • Saw blade diameter: 300 mm • Cutting depth: 80 mm • Cutting length: 5300 mm • Cutting height: 2200 mm • Maximum horizontal cut: 2080 mm

Condition: ready for operation (used), Year of construction: 2021, This Felder FORMAT 4 KAPPA 550 panel saw was manufactured in 2021. It features a sliding table saw with a saw blade diameter range of 250-550 mm, offering cutting heights of 202 mm at 90° and 140 mm at 45°. It supports three speeds: 3000, 4000, and 5000 rpm, and includes a cutting width of 1250 mm and length of 2800 mm. The machine also boasts e-motion control and a telescopic stop for crosscuts up to 3200 mm. Contact us for more information. • Saw blade diameter: 250–550 mm • Cutting height: 202 mm (90°), 140 mm (45°) Duodpfx Ajx D Exqjhbjw • Blade speeds: 3000 / 4000 / 5000 rpm • Cutting width: 1250 mm • Cutting length (sliding table stroke): 2800 mm • Control: Kappa 550 e-motion • Cantilever table support surface: 1250 x 650 mm • Telescopic stop for crosscuts up to 3200 mm • Crosscut stop swiveling range: 90° to 45° • Rear table extension behind saw axis: 1200 mm • Rip fence: electronically positioned via ball screw, enclosed/dust-free in the table

Condition: ready for operation (used), Year of construction: 2019, This Felder FORMAT 4 Tempora60.06LX edgebander was manufactured in 2019. It features an x-motion PLUS control system, chain feed with a speed of 10 m/min, and a Teflon-coated gluing unit for EVA or PUR granulate. The machine supports edge thicknesses from 0.4 to 3 mm and includes a multifunctional milling unit. Consider the opportunity to buy this Felder FORMAT 4 Tempora60.06LX edgebander. Contact us for more information about this machine. • Control system: x-motion PLUS • Chain feed • Feed speed: 10 m/min • Drive motor: 0.75 kW (S6) – 1.1 kW (S6) • Minimum workpiece length: 140 mm • Minimum workpiece width: 70 mm • Note: Minimum width varies depending on workpiece length, height, and surface finish. • Turntable edge magazine (rolled edge material) • Turntable diameter: 750 mm • Edge thickness: 0.4 – 3 mm • Extendable frame • Workpiece support extendable up to 450 mm • Upper pressure bar • Manually adjustable workpiece height: 8 – 60 mm • Edge feed • For rolls and rigid material • Joining unit • Power: 2.2 kW (2 × 1.1 kW) • Diamond cutter Z2 • Speed: 12,000 rpm Dodox D D R Sjpfx Ahbsuw • Gluing unit • Teflon-coated for 1.5 kg EVA or PUR granulate • Ready after approx. 10 min heating time • Tool-free quick-change system • Pressure unit • Pneumatically controlled • 1 driven and 2 conical pressure rollers • Shear • For roll edge material thickness: 0.4 – 3 mm • Cutting unit • Two high-frequency motors, each 0.35 kW, 12,000 rpm • Pneumatically swiveling 0° – 10° • Multifunctional milling unit (x-motion PLUS) • Flush and radius milling • One HF motor top and bottom, each 0.75 kW, 12,000 rpm • Each with 4 interchangeable blades • Corner processing unit • For soft and postforming workpieces • Front edge processing • Edge thickness: 0.4 – 3.0 mm • Workpiece height: 10 – 60 mm • Radius scraper unit • 2-axis motor-driven, position-controlled • Pneumatic release function • Polishing unit • Top and bottom

Condition: used, Year of construction: 2007, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting width (max.): 1,250 mm, saw blade diameter: 450 mm, tilt adjustment saw blade: 45 °, height adjustment type: electric, – Year of production: 2007 – Austrian manufacture TECHNICAL SPECIFICATIONS: – Total power: 7.35 kW – Max. saw blade diameter: 450 mm – Min. saw blade diameter: 250 mm – Scoring blade diameter: 125 mm – Pro Gline carriage guides – Carriage length: 2,800 mm – Fence with two stops – Cutting width to the right: 1,250 mm – Three spindle speeds: 3,500 / 4,500 / 5,500 RPM – Main motor power: 5.5 kW – Electric height adjustment of cut – Electric angle adjustment of cut – Electric setting of cutting width on the right side – Automatic scoring unit advance – Extraction port diameters: 100 mm and 120 mm Duedpfx Ahoymz Ubobjw Transport dimensions: – Length: 290 cm – Width: 230 cm – Height: 180 cm – Weight: approx. 1,000 kg

Condition: ready for operation (used), Year of construction: 2002, Brand: Felder Modell: FS2200 Year of manufacture: 2002 With sanding shoe in good condition Driven left and right Tech. info: Work table size: 2200x800 mm Wheel diameter: 250 mm Band width: 150 mm Belt length: 6200 mm Djdpfx Ahsth R Tljbeuw Chip nozzle: 160 mm Motor: 4 kW, 50 Hz, 380V, 3-phase Size for transport: 320x110x145 cm Stock no: 2002056

Condition: excellent (used), Felder TEMPORA F600 edge bander with glue box Liquids Pre-milling cutters, Glue application with roller, Interchangeable glue tank Second tank included Features glue box, enabling edge banding with PUR glue Pneumatic pre-cut guillotine Liquids End-trimming sawblades Top/bottom trimming unit Corner rounding unit, Profile scraper Cleaning fluids Flat scraper Polishing unit The machine has NC control Max workpiece height: 60mm Max edge banding thickness (roll): 3mm Feed rate: 10 m/min Original working distance: 30,000 meters, in my opinion the technical condition is very good Year: 2023 Possibility to inspect and test on site Dsdpfxey N Sdys Ahbeuw

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, power: 18 kW (24.47 HP), travel distance X-axis: 3,300 mm, travel distance Y-axis: 1,280 mm, travel distance Z-axis: 250 mm, number of spindles: 16, TECHNICAL DETAILS Working area X-axis: 3,300 mm Working area Y-axis: 1,280 mm Working area Z-axis: 250 mm Travel X-axis: 4,000 mm Travel Y-axis: 1,670 mm Travel Z-axis: 500 mm Dodpjyux I Uefx Ahbeuw Number of horizontal drilling spindles: 4 pcs. Number of vertical drilling spindles: 12 pcs. MACHINE DETAILS Voltage: 400 V Current consumption: 40 A Power: 18 kW Number of transport packages: 2 EQUIPMENT Documentation CE marking HSK-F63 tool clamping system Drilling tool Saw unit

Condition: ready for operation (used), Year of construction: 2013, machine/vehicle number: 200.04.007.13, functionality: fully functional, power: 11 kW (14.96 HP), workpiece height (max.): 60 mm, total height: 1,700 mm, total length: 4,800 mm, total width: 900 mm, TECHNICAL DETAILS Workpiece height min.: 8 mm Workpiece height max.: 60 mm Duedpfx Ahsyux Egobow MACHINE DETAILS Power: 11 kW Line voltage: 400 V Current: 28 A Phases: 3 Frequency: 50 Hz Dimensions & Weight Dimensions (L x W x H): 4,800 x 900 x 1,700 mm Machine weight: 1,250 kg EQUIPMENT Multifunction milling unit Pre-milling unit Profile milling unit Gluing unit

Condition: excellent (used), Year of construction: 2025, Format 4 Kappa 450 x-Motion 2-axis control, height and tilt adjustment Dujdey Rp D Tjpfx Ahbsw Technical data: - Cutting length: 2800 mm - Cutting width: 1300 mm - Cutting height: 155 mm - Max. saw blade Ø 450 mm - X-motion control - Angle scale with length compensation - Extractable Ø 120 mm - Motor power: 10 kW - Year of construction: 2025 Duplex mitre fence

Condition: excellent (used), Machine available from mid/end of June. Further information to follow. Dedpey Hl Nwsfx Ahbeuw

Year of construction: 2021, condition: ready for operation (used), This Felder RL 300 was manufactured in 2021. It features a new extraction system, never used, with a maximum volume flow of 6000 m3/h and a nominal volume flow at 20 m/s of 5090 m3/h. The machine includes a filter area of 50 m2 and dual 250-liter chip collection containers. Sound pressure level is at 75 dB. For more information about this machine, please reach out to us. Duedpex D Ex Rjfx Ahbjw • Volume flow: Max 6000 m3/h • Nominal volume flow 20 m/s: 5090 m3/h • Negative pressure at total connection at 20 m/s: 2680 Pa • Extraction connection: Ø 300 mm • Filter area: 50 m2 • Sound pressure: 75 dB • Chip collection container: 2 x 250 liters • Extraction connection can be mounted on the left or right

Condition: ready for operation (used), Year of construction: 2013, operating hours: 20 h, working width: 650 mm, Belt sander manufactured in 2013. This FELDER FW 650 features a working width of 650 mm and a powerful 7.5 kW motor. It includes a variable feed speed ranging from 3.7 to 16 m/min and an automatic belt centering system. The machine comes with interchangeable sanding pads and a rubber contact roller. If you are looking to get high-quality sanding capabilities, consider the FELDER FW 650 machine we have for sale. Contact us for further details. • Sanding belt dimension: 670 × 1900 mm • Motor power: 7.5 kW (upgraded from 5.5 kW) • Voltage: 3 × 400 V Duodpfx Ahjyli H Aebsw • Duty type: S1 • Variable feed speed: 3.7–16 m/min • 1 combination aggregate • Interchangeable sanding pad • Rubber contact roller: 85 Shore • Electropneumatic sanding shoe • 2nd feed speed • Automatic belt centering • Automatic star-delta start (SD start) • Extraction connection: 120 mm • Control: Conventional (non-CNC) • Minimum transport height: 2370 mm • Minimum transport width: 2200 mm Additional equipment • Double-sided roller table extension • Abrasive belts included: • 670 × 1900 mm K80 (12 pcs) • 670 × 1900 mm K120 (12 pcs)

Condition: ready for operation (used), Year of construction: 2021, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,670 mm, travel distance Z-axis: 500 mm, number of axes: 4, This 4-axis CNC processing center was manufactured in 2020. It features a 12 kW milling spindle with a speed range of 1000-24000 rpm and a C-axis rotation of 0-360°. The machine includes a 12-station linear tool changer and a comprehensive drill head with 16 spindles. It also boasts a robust safety system with a light barrier. Consider the opportunity to buy this Felder Format 4 Profit H 200 CNC processing center. Contact us for more information about this machine. • Automatic central lubrication • Working area: X 3300 mm / Y 1280 mm / Z 250 mm (clearance height from console level depends on clamping system) • Operating terminal on left side of machine • Hand terminal with axis speed control and emergency stop Djdpfxsx D D Hmj Ahbjuw • Software: Woodflash (CNC board, tool database, program editor) • Positioning display for workpiece support and vacuum suction cups • Vacuum connection for template milling (left side), connection diameter 12 mm • Vacuum pump: 1x, total suction power 90 m³/h @ 50 Hz or 108 m³/h @ 60 Hz • Milling spindle: 12 kW (S6), HSK F63, 1000–24,000 rpm, full rated power at ~12,000 rpm, air-cooled; C-axis 0–360° • Tool changer: 12-station linear on left side of machine stand, incl. pickup space for aggregates; max tool diameter 250 mm; max tool length 240 mm • Drill head DH 16 4H 2S: 12 vertical spindles (7X / 5Y); 4 horizontal spindles (2X / 2Y); pre-stroke 70 mm; drilling length 70 mm; shank Ø 10 mm • Groove saws: 2 (one X, one Y); max blade Ø 120 mm; max thickness 5 mm; continuously variable speed up to 7,500 rpm • Safety: front light barrier system

Condition: ready for operation (used), Year of construction: 2021, This Felder FW 1102 P was manufactured in 2021. A used wide belt sander featuring a contact roller unit and a fine sanding with segmented electro-pneumatic sanding shoe. It includes a 7" touch color screen, digital grain compensation, and a vacuum table. The feed speed is variable from 2.5 to 18 m/min, sanding width of 1100 mm, and height range from 3 to 170 mm. Consider the opportunity to buy this Felder FW 1102 P belt sander. Contact us for more information. • Contact roller unit Djdpfx Ajx D Eyhehbsuw • Fine sanding with segmented, electro-pneumatic sanding shoe, 25 mm segment width • 7" color touch screen • Digital grain compensation • Vacuum table with blower integrated in the machine stand • Infinitely variable feed speed 2.5–18 m/min (controllable from the touch screen) • Sanding width: 1100 mm • Sanding height: 3–170 mm • Sanding length: 1900 mm

Condition: used, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, cutting height (max.): 104 mm, cutting width (max.): 1,250 mm, saw blade diameter: 315 mm, tilt adjustment saw blade: 45 °, height adjustment type: mechanical, – Austrian production – X-Roll sliding carriage guide system – DTR and CE user manuals TECHNICAL SPECIFICATIONS: – Carriage length: 2050 mm – Cutting width (right): 1250 mm – Max. blade diameter: 315 mm – Scoring unit diameter: 100 mm – Main motor: 5.5 kW – Scoring unit motor: 0.75 kW – Brake – X-Roll guide system – Cutting height adjustment – Manual angle adjustment: 0° - 45° – Max. cutting height: 104 mm – Possibility to install cutter: thickness: 6 - 20 mm – Max. diameter: 228 mm – Pawl – Blade guard Dedpfxoym Amlj Ahbsuw – Extraction port diameter: 50 and 120 mm – Dimensions (L/W/H): 220 / 200 / 130 cm – Weight: ~ 550 kg

Condition: ready for operation (used), Year of construction: 2016, Felder clean air extraction unit | Dust extraction system RL 200 | Ø 200 mm Maximum flow rate: 4000 m³/h Nominal flow rate: 20 m/sec, 2300 m³/h Duodjwa Rlkspfx Ahbjw Valve pressure: 2380 Pa Filter area: 20 m² Extraction connection diameter: 200 mm Residual dust content: < 0.1 mg/m³ Felder Briquetting Press FBP 50 Briquette diameter: 50 mm Throughput: 30–50 kg/h Motor power: 4 kW Dimensions (L x W): 1750 x 1270 mm Weight: 950 kg Hydraulic oil capacity: 125 liters Year of manufacture: 2016 Condition: Ready for use Price: €15,500 The system has already been dismantled and is stored in the Raasdorf warehouse.

Condition: used, Year of construction: 2021, functionality: fully functional, power: 14 kW (19.03 HP), input voltage: 400 V, input current: 36 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 80 mm, cutting width (max.): 3,200 mm, overall weight: 4,200 kg, Equipment: documentation/manual, rotational speed infinitely variable, saw blade guard, scorer, We offer this used Felder kappa automatic 80 sliding table saw. Machine can be very fast in production if presented with an equally fast operator. The cuts are perfect, 90 degree angle is easy to adjust (and should be done regularly). We also offer all of the saw blades as well as undercutters we have to it. Duedsy Dda Aopfx Ahbjw Model: kappa automatic 80 Voltage: 400 V Phases: 3 Frequency: 50 Hz Current: 36 A Power: 14.0 kW Year of construction: 2021 year Weight: 4200 kg If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, operating hours: 1,800 h, power: 19 kW (25.83 HP), input voltage: 400 V, input current: 40 A, input frequency: 50 Hz, type of input current: three-phase, travel distance X-axis: 3,500 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 250 mm, workpiece length (max.): 3,300 mm, workpiece width (max.): 1,280 mm, workpiece height (max.): 150 mm, number of axes: 4, number of slots in tool magazine: 41, controller manufacturer: Tpa Srl – Tecnologie e Prodotti per l'Automazione, actuation type: electric, Equipment: USB port, documentation/manual, We offer this very good FORMAT4 PROFIT H200 13.33 machining center. The machine is equipped with 4th axis spindle and max-version drilling head. It only worked about 1800 hours and has some small marks from usage. In the bundle we will provide everything that came with the machine as well as additional suction cups. Milling tools and holders are not a part of the deal FOR NOW. Machine is working daily and is an excellent choice for any woodworking company. Type designation: PROFIT H200 13.33 Serial number: 302.07.040.20 Code: 0491 Supply voltage: 400.0 V Phase: 3P+N Frequency: 50/60 Hz Current: 40.0 A Power: 19.0 kW Dsdpjy Dcvvofx Ahbeuw Year of construction: 2020 year Control voltage: 24 VDC Minimum fuse: 47 A Maximum fuse: 64 A Minimum compressed air pressure: 8 bar Air consumption: 350 Nl/min If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: ready for operation (used), functionality: fully functional, power: 7.35 kW (9.99 HP), 2-speed (Vario) feed gearbox 4-spindle thickness table guide Electric thickness table adjustment Dsdpfoyzc Efox Ahbsuw