Used Felder Edgebander for sale (152)

Condition: excellent (used), Year of construction: 2019, Edgebanding machine Dkjdpoxix Hxjfx Agtot Manufacturer: Felder Model: Tempora 60.06, F600 Year of manufacture: 2019 Fully automatic operation from the control panel. Jointing unit: Yes End trimming unit: Yes Radius milling unit: Yes Radius scraper: Yes

Condition: excellent (used), Felder TEMPORA F600 edge bander with glue box Liquids Pre-milling cutters, Glue application with roller, Interchangeable glue tank Second tank included Features glue box, enabling edge banding with PUR glue Pneumatic pre-cut guillotine Liquids End-trimming sawblades Top/bottom trimming unit Djdpfjy N Sdyjx Agtokt Corner rounding unit, Profile scraper Cleaning fluids Flat scraper Polishing unit The machine has NC control Max workpiece height: 60mm Max edge banding thickness (roll): 3mm Feed rate: 10 m/min Original working distance: 30,000 meters, in my opinion the technical condition is very good Year: 2023 Possibility to inspect and test on site

Condition: excellent (used), Year of construction: 2020, Panel saw K 540 S incl. clean air extraction unit RL 140 Max. saw blade diameter: 400 mm Cutting width: 800 mm with full table length Max. cutting height: 140 mm Dkjdpfx Aoyyaifogtot Cutting length: 3200 mm Angle adjustment: manual

Condition: excellent (used), Year of construction: 2010, 4 kW motor Dkedpfx Agoul Utmotst 4 knives Table length 198 cm Table width 41 cm

Condition: good (used), Year of construction: 2017, functionality: fully functional, operating hours: 130 h, power: 6.5 kW (8.84 HP), input voltage: 400 V, input frequency: 50 Hz, Further technical data Edge thickness: 0.4–3 mm Workpiece height: 10–45 mm Chain feed with 8 m/min Total running length: 5,864 linear meters Jointing unit with max. 2 mm material removal Strip edgebander in single-feed operation Guillotine for hard PVC/ABS up to 3 mm thickness Teflon-coated glue pot, 1.2 kg capacity, with glue roller End trimming unit, 0.18 kW Extraction connections: 2x 80 mm, 1x 120 mm 2x HW saw blades, D-80 mm, Z16 Multi-milling unit with 12,000 rpm and 0.22 kW, 'Quickset' system for radius, flush and chamfer milling Control panel with LCD display and keypad Extendable workpiece support, extendable up to 450 mm Manually adjustable workpiece height: 10–45 mm Rotary table for edge banding rolls Minimum workpiece width: 70 mm Minimum workpiece length: 210 mm Extendable workpiece support, extendable up to 450 mm Manually adjustable workpiece height: 10–45 mm Additional equipment: Surface scraper, mechanically engageable Radius scraper knife Dedpfjyfvhajx Agtskt

Condition: excellent (used), Felder F 700 Z Spindle Moulder Dkedpfxsyn Iu Re Agtst 205 cm sliding table integrated in the worktop, Spindle adjustable in height and tiltable 0-45 degrees, Interchangeable 30 mm spindle, 7.3 kW motor, electric brake, Forward and reverse rotation, 4 spindle speeds, Very good condition, fully ready for operation.

Condition: excellent (used), Felder RL 250 Extraction Unit Capacity: 6200 m³/h Extraction port: 250 mm Chip container capacity: 500 L Fire extinguishing system with water connection Motor: 5.5 kW Weight: 750 kg Very good condition Dedpfx Agox A Exustskt

Condition: used, Felder AD 741 Surface and Thickness Planer Spiral cutter block Dsdpexxavmofx Agtjkt Main motor 4 kW, Surface planer table length 2000 mm, Planing width 410 mm, Thicknessing capacity height 230 mm, 1 feed speed, Manual thickness table adjustment with digital height indicator Machine ready for operation, quiet

Condition: excellent (used), Thickness planer Felder D963 Dsdpfx Aoxdmu Tjgtokt Max. planing width: 630 mm, Max. planing height: 300 mm, Spiral cutterhead, two rows, Electric height adjustment with readout, Feed with adjustable speed, 7.3 kW motor, Machine in very good condition.

Condition: excellent (used), Year of construction: 2025, Format 4 Kappa 450 x-Motion 2-axis control, height and tilt adjustment Technical data: - Cutting length: 2800 mm - Cutting width: 1300 mm - Cutting height: 155 mm - Max. saw blade Ø 450 mm Dsdpfx Aey Rp D Tegtekt - X-motion control - Angle scale with length compensation - Extractable Ø 120 mm - Motor power: 10 kW - Year of construction: 2025 Duplex mitre fence

Condition: new, Year of construction: 2025, Band saw BS940RS3"SP V400/3/50 HP 20 CE CE VERSION Manual blade tensioning Standard equipment Self-braking motor 400 V/3/50 Dkodpfexzu Nmox Agtet Reinforced twin-column base Steel blade tensioning system with guide lubrication system Front emergency stop activated via cable Rear emergency stop button Robust flywheels (1/3 crown in front) without rubber Bronze scrapers on flywheels Gravity blade lubrication system with felt pad Automatic star-delta starter Blade tension indicator Rack-and-pinion blade guide elevation with integrated blade guard Blade width: max. 90 mm Blade is not included This configuration includes: - Upper and lower blade guides with bronze side elements; - Three-phase 400V/50Hz/20HP self-braking motor; - Horizontal transport pallet FEEDER RA260 ELP (SR026) V400/3/50*CE WE VERSION Pneumatic control – Electronic variable speed drive

Condition: good (used), Year of construction: 1990, functionality: fully functional, planing width: 310 mm, cutting width at rip fence: 80 mm, Panel saw, milling machine, planer, mortising machine, combination woodworking machine, table saw, circular saw, joiner's saw, panel saw, table router, tilting spindle moulder Manufacturer: FELDER Model: BF6-31 Year of manufacture: 1990 Sliding carriage: 1.6 m Manual height adjustment for saw blade Manual tilting of the saw blade up to 45° Rip fence with fine adjustment up to approx. 80 cm Support table Mitre fence Dodpfx Ageyzdnbstekt Main motor power: 3 kW Tilting spindle moulder Manual height adjustment of the spindle Manual spindle tilt up to 45° to the rear Spindle diameter: 30 mm 3 speeds, adjustable by belt Spindle retractable below table and removable Motor power of milling unit: 3 kW Milling fence with fine adjustment Surface and thickness planer Planing width: 31 cm Maximum workpiece height: approx. 22 cm Central dust extraction hood for planing and thicknessing Tilting fence 2-knife Felder cutterblock system Motor power: 3 kW Mortiser Single-lever control Workpiece hold-down Chuck up to 16 mm

Condition: excellent (used), For sale is a used Felder AD5-31 jointer-thicknesser with a planing length of 1500 mm. The machine is used as a demonstration unit in our showroom and is therefore in like-new condition. Technical data: - 4-knife cutterblock - Planing width 310 mm - Planing length 1500 mm - Max. workpiece height 230 mm - Suction port Ø 120 mm - Motor power 4 kW / 5.4 HP - Year of manufacture 2022 Dkedpfx Agjw Hcygjtjt The machine is located at A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Contact: Tel. 06244-20299. Related terms: jointer, thicknesser, planer, jointer-planer, thickness planer Reference: R-A0117

Condition: like new (used), Year of construction: 2024, For sale is a used Felder RL-300 clean air extraction unit with a maximum air flow rate of 6,000 m³/h. The extraction unit is in very good condition and has been inspected and refurbished by our qualified staff. Technical Data: - Extraction capacity: 6,000 m³/h - Maximum negative pressure: 2,450 Pa - Extraction connection diameter: 300 mm - Chip collection volume: 2 x 210 liters - Dimensions: 3,015 x 970 x 2,280 mm (L x W x H) - Automatic fire extinguishing system with powder extinguisher - Steel impeller - Motor power: 8.2 kW - Year of manufacture: 2024 The clean air extraction unit is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Related terms: extraction, extraction unit, clean air extraction unit, clean air, RL Reference: R-S1522 Dksdpfxjxdlwmo Agtst

Condition: as good as new (ex-display), functionality: fully functional, Demonstration machine For sale is our Felder RL-140 clean air extraction unit from our showroom, with a maximum air volume flow of 2,500 m³/h. The extraction unit is in like-new condition and has been inspected and serviced by our professional staff. Technical data: - H3 dust-tested - Extraction connection diameter: 140 mm - Extraction can be configured for right or left side - Manual chip shaker - 10 m² filter area - Max. air volume flow: 2,500 m³/h - Minimal footprint: 1,040 x 898 x 1,940 mm (L x W x H) The clean air unit is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: extraction, extraction unit, clean air unit, clean air, RL Reference: R-A0117 Dkedpoxdkw Eofx Agtst

Condition: like new (used), DEMONSTRATION MACHINE For sale is a Felder FD-21 dowel boring machine. The machine is in use in our showroom and is therefore in mint condition. Technical data: - Version with 21 spindles - 2 hold-down clamps - 2 stops, each 1.5 m, for line boring - 2 side stops with reading optics - Indexing system for side stop with 8 positions - Motor power: 2 HP - Year of manufacture: 2025 Dsdpfexxi T Uex Agtjkt The machine is located in A-5431 Kuchl and can be inspected and picked up during our opening hours at any time. Subject to prior sale! Related terms: dowel milling machine, drilling machine, line boring Reference: R-A0117

Condition: like new (used), For sale is a used Felder AD7-41 surface-planer thicknesser with a planing thickness up to 230 mm. The machine is in use as a demonstration unit in our showroom and is therefore in like-new condition. Technical specifications: - 4-knife cutterblock - Planing width: 410 mm Dkjdsw Hckrspfx Agtjt - Table length: 2000 mm - Max. workpiece height: 230 mm - Electric thickness adjustment PowerDrive - Extraction port Ø 120 mm - Motor power: 4 kW / 5.4 HP - Year of manufacture: 2023 The machine is located in A-5431 Kuchl and can be inspected during our business hours at any time. Subject to prior sale! For information call 06244-20299. Related terms: surface planer, thickness planer, planing machine, jointer, thicknesser Reference: R-A0117

Condition: excellent (used), Year of construction: 2023, DEMONSTRATION MACHINE! For sale is a used Felder KF 700 SP sliding table saw & spindle moulder with a cutting width of 800 mm. The machine is in excellent condition and has been refurbished and inspected by our professional staff. (Fully functional) Technical data: - Tilting circular saw and spindle moulder 90-45° - Sliding table 2500 mm Dkjdpfx Asy Hgxmsgtot - Extension table with mitre fence 2600 mm - Rip fence with fine adjustment - Cutting width 800 mm - Spindle fence with multi-adjustment system - 4 spindle speeds - 3 motors, each 7.5 HP (5.5 kW) - Automatic star-delta start The machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: saw, circular saw, spindle moulder, combination machine, combi machine, milling machine Reference: R-D1618

Condition: ready for operation (used), Year of construction: 2016, Felder clean air extraction unit | Dust extraction system RL 200 | Ø 200 mm Maximum flow rate: 4000 m³/h Nominal flow rate: 20 m/sec, 2300 m³/h Dedpfx Agswa Rlkotjkt Valve pressure: 2380 Pa Filter area: 20 m² Extraction connection diameter: 200 mm Residual dust content: < 0.1 mg/m³ Felder Briquetting Press FBP 50 Briquette diameter: 50 mm Throughput: 30–50 kg/h Motor power: 4 kW Dimensions (L x W): 1750 x 1270 mm Weight: 950 kg Hydraulic oil capacity: 125 liters Year of manufacture: 2016 Condition: Ready for use Price: €15,500 The system has already been dismantled and is stored in the Raasdorf warehouse.

Condition: like new (used), Year of construction: 2023, Felder FST 160 Sanding Table Technical Data Dimensions [mm]: 1660 x 1020 Working height [mm]: 726–1026 Dkedpfxey Agp Ds Agtet Extraction port diameter [mm]: 140 Year of manufacture: 2023 Price: 1100.-

Condition: excellent (used), Year of construction: 2024, DEMONSTRATION MACHINE!! For sale: a used Felder membrane press MVP with a tiltable worktable. The machine is in like-new condition and has been serviced and inspected by our professional staff. (Fully functional) Technical data: - Worktable: 3290 x 1560 mm - HPL vacuum table with channels - 3 mm rubber membrane Dkodpfoxzppbjx Agtjt - Rotary vane vacuum pump - Undercarriage The membrane press is located in A-8561 Söding and can be inspected at any time during our business hours. Subject to prior sale! Related terms: press, veneer press, pneumatic press Reference: R-D1618

Condition: like new (used), Year of construction: 2023, functionality: fully functional, For sale is a Felder F-700 Z milling machine with 4 spindle speeds. The machine is used as a showroom model at our facility and can be considered as new, with full warranty/guarantee. Technical specifications: - 4 milling speeds - Milling spindle tiltable 90° - 45° - Milling fence for tools up to Ø 230 mm - Multi-adjustment system - Tenoning and slotting table - Motor power 5.5 kW / 7.5 HP, SD start - Year of manufacture: 2023 / as new Dsdswp Ri Uepfx Agtskt The machine is located at A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Info Tel.: 03137-3109 Related terms: milling cutter, milling machine, milling Reference: R-D1618

Condition: excellent (used), Year of construction: 2008, working width 510mm 4-knives shaft tables length 2250mm Dsdpfx Asy Dawkogtjkt motor power 7,35kW angle regulated fence year 2008 iron cast tables

Condition: excellent (used), Year of construction: 2013, I sell the format sliding table saw with scoring Manufacutrer: FELDER Dkjdpfx Ajtt Nq Djgtot Model: K975 Year 2013 Cutting length 3200mm. Cutting width 1350mm Cutting height 130mm (at saw blade 400mm) Saw blade and scoring tilting 0-45° digital Saw blade and scoring height adjustment digital Parallel fence manual adjustable. Turn on the main saw blade and scoring unit from control panel Turn on the main saw blade and scoring unit from aluminium sliding table Main motor format sliding table saw 5,5KW (7,5 HP) (3500/4500/5500 rpm adjustable) Scoring motor format sliding table saw Tools, Optionals, and equipment on photos included in price. Very good condition. Available immediately.

Year of construction: 2006, condition: used, functionality: fully functional, Planer, jointer FELDER plan51 Specification: • Condition – used, after inspection • Manufacturer – FELDER • Model – plan51 • Working width – 510 mm • Table length – 2250 mm • Adjustable tilting fence • Motor power – 7.35 kW • Spindle speed – 5000 rpm • Chip thickness indicator • Max cutting depth – 8 mm • Noise-reducing combs at the shaft • Motor brake • 4-knife shaft, 120 mm diameter, compatible with Tersa knives • Start/stop 0-1 • Chip extraction outlet – diameter 140 mm • Year of manufacture – 2006 • Overall dimensions: 225 x 105 x 125 cm (L x W x H) Additional information: • The machine is in perfect technical condition and ready for immediate use • Photos shown reflect the actual condition of the item • Possibility to run and test the machine on site • Free operator training provided at the company headquarters • Listed price does not include VAT or transport costs Financing and transport: Dsdpfxsyy Sr So Agtokt • We organize transport via MDD fleet, courier services, or external carriers • Financing options available: lease or lease loan