Hoist motor KBH 125 B2/12

Demag

Condition: excellent (used), Bridge crane, overhead crane, disc brake, crane brake, disc, drum and storm brakes, traveling crane brake, brake ring, conical brake disc Fgodpozixx Ujfx Anpei -Manufacturer: Demag, brake ring for conical brake disc, unused -Type: 628 626 44 RIW -Dimensions: see photos -Dimensions: Ø 310 x 37 mm -Weight: 1.0 kg

Condition: excellent (used), Year of construction: 2011, Ficep 1003 DZB CNC Drilling / Sawing Line – Year 2011. 3 Spindles. Automatic Tool Changer. Scribing. Short Piece Removal. Hard Stamping. Gripper feed. Infeed and Outfeed Cross Transfers. 1000mm Section Capacity. Fgjdpfexmvnusx Anpji

Condition: used, Electric chain hoist, electric lifting unit, crane DEMAG type DKUN 2-160 K V3 F6 Manufacturer's serial number: 61620975 Year of manufacture: 1995 Load capacity: 310 kg Hook travel: 1.45 meters Distance from suspension point to load hook: 450 mm Lifting speed: 12.5 m/min (2-strand) Control pendant cable length: approx. 1.9 meters Power supply: 400 volts, 50 Hz - 2 load strands = 300 kg Fedpfj Aipkcjx Anpsgi - only one lifting speed Weight: 33.5 kg

Condition: excellent (used), Year of construction: 2014, Sumitomo Demag Systec 210/580-430 with Sepro Success 22 robot / Hybrid machine Year of manufacture: 2014 Injection unit: Screw diameter: 35 mm Shot weight: 153 g Injection pressure: 2640 bar Dosing volume: 168 ccm Clamping unit: Clamping force: 210 t Tie bar spacing: 580x580 mm Platen size: 860x860 mm Ejector: hydraulic Clamping unit: toggle Controller: NC5 Additional equipment: Very good technical condition Hybrid machine: high-speed, energy-saving and quiet Operating hours: approx. 30,000 h in automatic operation Euromap 67 Robot interface Air valve x 9 Hydraulic needle core pull, controlled by a proportional valve x 1 Hydraulic core pull x 4 Air core pull x 5 Fjdsz Ipkcepfx Anpogi Controller with hot runners x 8 Injection unit hardened - bimetal Main motor of the machine - servo motor driven by an inverter - energy saving Proportional valve on the injection unit – precise injection Parallel movements Integrated printer Dimensions: Weight: 8930 kg Length/Width/Height: 6.02x1.76x2.15 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in technical live tests at our company in Łódź. Price: On request

Condition: used, Year of construction: 2009, machine/vehicle number: 0102-250002, The Behringer HBP310-523GA double mitre bandsaw is a high-quality, robust machine that has been specially designed for professional use in metalworking. It offers an excellent combination of performance, precision and versatility, making it suitable for a wide range of applications in the industry. The HBP310-523GA is sold including roller conveyor in the infeed and outfeed side, feed gripper system and cross feed system in the outfeed area. The machine is in very good condition. Working areas of the HBP310-523GA saw Mitre left Fgjdpfx Anjyh Ixaepji 75° round 310 mm, flat W x H = 520 x 310 mm 60° round 310 mm, flat W x H = 450 x 310 mm 45° round 310 mm, flat W x H = 350 x 310 mm 30° round 230 mm, flat W x H = 230 x 310 mm Mitre right 75° round 310 mm, flat W x H = 500 x 310 mm 60° round 310 mm, flat W x H = 420 x 310 mm 45° round 270 mm, flat W x H = 270 x 310 mm Minimum round: 20 mm Maximum material length: 10 m

Condition: excellent (used), Year of construction: 1995, Demag Ergotech Compact 250-80 Year of manufacture: 1995 Injection unit: Screw diameter: 18 mm Injection weight: 20 g injection pressure: 2400 bar Dosing volume: 22.8 ccm Clamping unit: clamping force: 25 t Fgsdpfez Iqlbox Anpoi tie bar distance: 280x280 mm size of clamping platens: 410x410 mm ejector: hydraulic clamping unit: hydraulic Control system: NC4 Additional equipment: Air valve x 2 Hydraulic core pull x 1 Injection unit hardened - bimetal Original Demag mold crane: chain, electrically controlled, 2 lifting speeds Dimensions: Weight: 2600 kg Length/width/height: 3.20x1.30x1.80 m Drive: Pumps/motor: 7,5 kW Heating power: 3,7 kW Total power: 11,2 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2006, Demag Ergotech System 80/420-430 Year of manufacture: 2006 Injection unit: Screw diameter: 40 mm Injection weight: 205 g Injection pressure: 2020 bar Metering volume: 231 ccm Clamping unit: clamping force: 80 t tie bar distance: 420x420 mm size of clamping platens: 580x590 mm ejector: hydraulic clamping unit: hydraulic Fgsdpfoz Iql Iox Anpji Control system: NC4 Additional equipment: Euromap 67 Robot interface Air valve x 2 Hydraulic core pull x 3 Control with hot runners Injection unit hardened - bimetal Built-in printer It is possible to change the screw diameter Dimensions: Weight: 4100 kg Length/width/height: 4.10x1.40x1.90 m All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: used, Year of construction: 2013, functionality: fully functional, HD-X 918 – HBP 410/923G: complete, state-of-the-art, CNC-controlled system for efficient and rapid fabrication by drilling and sawing of almost all types of structural sections and flat bars. Fjdpfx Ajw Hf T Nonpegi

Condition: excellent (used), Year of construction: 2013, Sumitomo Demag Systec 100/420-310 with Sepro SR SDR11 S3 TRANS robot / Hybrid Machine Year of manufacture: 2013 Injection unit: Screw diameter: 35 mm Shot weight: 149 g Injection pressure: 2024 bar Dosage volume: 168 ccm Clamping unit: Clamping force: 100 t Tie bar spacing: 420x420 mm Platen size: 600x600 mm Ejector: hydraulic Clamping unit: hydraulic Control system: NC5 Additional equipment: Hybrid machine: high-speed, energy-saving, and very quiet Operating hours: approx. 38,000 h in automatic mode Robot interface Fgedpfxjz Ipi So Anpji Air valve x 2 Hydraulic core pull x 1 Hardened injection unit - bimetallic Main motor of the machine - servo motor driven by inverter - energy saving Built-in printer Machine was regularly serviced by authorized Sumitomo Demag service Robot Sepro SR SDR11 S3 TRANS Year of manufacture: 2013 5-axis robot: 3 axes driven by servomotors (electric); axes A and C (rotation) - pneumatic Touch control panel Robot safety package Robot with adapter, safety enclosure Robot acquisition available at an additional cost Dimensions: Weight: 4400 kg Length/Width/Height: 4.20x1.40x2.00 m All machines offered are started up by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine, or to take part in technical live tests at our facility in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2012, Sumitomo Demag Systec 350/720-2300 / Production Line with Wittmann-Demag DR833 Robot Year of manufacture: 2012 Injection Unit: Screw diameter: 70 mm Shot weight: 1103 g Injection pressure: 1877 bar Dosage volume: 1212 cm³ Clamping Unit: Clamping force: 350 t Tie bar distance: 720x720 mm Platen size: 1040x1060 mm Ejector: hydraulic Clamping system: toggle lever Control system: NC5 Additional equipment: Euromap 67 Robot interface 5x air valves 1x hydraulically operated core pull with proportional valve 5x hot runner controls Hardened injection unit – bimetal Moog proportional valve on the injection unit – high-precision injection Parallel movements Central lubrication 3 variable-capacity hydraulic pumps Integrated printer Machine has been regularly serviced by authorized Sumitomo Demag technicians Robot Wittmann-Demag DR833 Year of manufacture: 2011 4-axis robot: 3 axes driven by servomotors (electric), Y-axis telescopic; C-axis pneumatic, A-axis movement Axis travel: X-900, Y-1600, Z-3000 Touch control panel Robot safety package Fgjdpfsz Iplmsx Anpsi Robot with adapter, conveyor belt, and protective enclosure Purchase of the robot and conveyor belt at additional cost Dimensions: Weight: 15,750 kg L x W x H: 8.26 x 2.01 x 2.27 m All offered machines are started up by our service technicians prior to sale. It is possible to obtain a video of technical tests for the selected machine, or to participate in live technical tests at our facility in Łódź. Price: On request

Year of construction: 1984, condition: used, 1x Wimag gantry crane Load capacity: 20,000 kg Fodpfeyx Ercsx Anpjgi Span: 16 m (adjustable to 12 m in 500 mm increments) Outreach: 0 m Lifting height above rail: 7.5 m Hook travel: 25 m Radio remote control Cable reel suitable for 40 m

Condition: used, Electric chain hoist, electric lifting mechanism, DEMAG crane, type DKUN 1-100 K V1 F4 Manufacturer's serial no. 61801900, year of manufacture 1997 Load capacity: 100 kg Hook travel: 3 meters Fedpj Ah Iknefx Anpogi Main lifting speed: 8 m/min Fine lifting speed: 2 m/min Chain size: 3.6 x 10.6 mm Control cable length: approx. 1.8 meters Power supply: 400 volts, 50 Hz 1 load strand = 100 kg Weight: 16.5 kg In good condition.

Condition: used, Electric chain hoist, electric lifting unit, DEMAG crane, type DKES 2-200 K V2 DI with Dematik BUS control via crane control system Fgeds Ah Ikkspfx Anpei Factory No. 61456646, Year of manufacture 2003 Load capacity: 200 kg Hook travel: 4.0 meters Main lifting speed: 14.0 / 19.2 m/min Fine lifting speed: 0.20 m/min Chain size: 4.2 x 12.2 mm 1 load strand = 200 kg - with DKES2/5 500V control logic - without crane operating control - Dematik BUS control via crane control system - without trolley Mains connection: 400 volts, 50 Hz Rated power: 750 W Rated current: 2.4 A in good condition

Condition: excellent (used), functionality: fully functional, 15 new DEMAG crane travel motors / crane motors, some with gearboxes Fgodsv Uvuhjpfx Anpji KBF / KBA 71 80 90 100 112 125 140 160 Very good used and tested condition Well below manufacturer's retail price Info: We have over 20,000 DEMAG items in stock! Over 20,000 DEMAG spare parts in our warehouse! Check out my other offers from my inventory!

Condition: used, Electric chain hoist, electric lifting mechanism, DEMAG crane, type PK2N-F Serial No.: 5785034 Year of manufacture: 1988 Load capacity: 500 kg Hook travel: 5 meters Main lifting speed: 5 m/min Fgodpfx Aj Ah Iiuenpoi Fine lifting speed: 1.25 m/min Control pendant cable length: approx. 3.5 meters Power supply: 400 volts, 50 Hz - 2 load chains = 500 kg - Electric travel unit DEMAG, type 13/3 PF8 with 1 travel speed of approx. 8 m/min. Type 13/3PF 8 - For double T-beams with approx. 100 to 200 mm width Weight: 63 kg In good condition