Used Dalian for sale (10)

Condition: ready for operation (used), Year of construction: 2018, L&Z Lathe / DMTG - Dalian CW6163E / 5 - Meter Turning Length -Year of manufacture: 2018 -CE marking -Turning diameter over bed: 630mm -Turning diameter over cross slide: 350mm -CENTER DISTANCE: 5000 mm -Spindle bore: 100mm -Bed width: 550mm -Spindle nose: C11 -Spindle speeds: 7.5 - 1000 RPM -Number of speed steps: 18 -Automatic longitudinal / crossfeed -Rapid traverse in bed slide / longitudinal & crossfeed -Thread cutting / Metric / Inch / Module etc. -Main drive: 11 KW -Tailstock quill diameter: 100mm -Tailstock quill stroke: 250mm Dwedpfx Apo Ah E I Hs Aod -Coolant system -3-jaw chuck: 300mm -2 x Steady rests -Chuck guard Dimensions: L x W x H: 7.4 x 1.4 x 1.6 meters / Weight: 6700 KG Errors and omissions excepted.

Condition: excellent (used), Year of construction: 2010, operating hours: 1,000 h, functionality: fully functional, Controller FANUC Oi-MD Table size 1120 x 560 mm Max. table load 750 kgs X-axis travel 1020 mm Y-axis travel 560 mm Z-axis travel 600 mm Distance spindle nose to table surface 135 – 735 mm Speed ​​60 – 8000 rpm Spindle taper BT40 Tool magazine 20 positions (umbrella magazine) Main drive power 7,5/11 kW Rapid traverse X/Y/Z 24/24/18 m/min Machine dimensions (L x W x H) 2820 x 2530 x 2500 mm Machine weight approx. 6000 kg Accessories - Chip conveyor - Workplace lighting Dodey Id Tkjpfx Ap Aswd - Signal light - Handwheel - Feet The machine was modified to a special-purpose machine, but this only refers to side covers. The machine can be used for bar material automatical machining (sawing and milling). However these can be converted back to normal function (just machining center). The machine was hardly used and has 1000 operating hours. Still powered up in Hungary.

Condition: excellent (used), Lead/Pull spindle lathe Manufacturer: Dalian Inv. No. 3857 Type: CDS 6232 Year of manufacture: 2008 * Distance between centers: 750 mm * Center height: 170 mm * Swing over bed: 340 mm * Spindle speed: 59 - 2100 rpm Dwodpjzrvn Eofx Ap Asd * Spindle bore: 52 mm * 2-axis digital display SINO * 3-jaw chuck * Coolant system Machine weight: approx. 1450 kg

Condition: like new (used), Dalian XK-550 roller mill complete (control, hydraulics, motor). Good condition, factory-assembled, ready for immediate use. Type: Dalian XK-550 Roller width: 550 mm Design: closed, industrial roller mill Working length: 1500 mm Roller speed: 18–30 m/min Speed ​​ratio: 1:1.27 Gap adjustment: hydraulic Djdpfx Aey Eyy Ujp Ajwd Max. gap: ~0.5–12 mm Capacity: 2–6 t/h Power: 110kW Material: hardened cast iron rollers

Condition: excellent (used), Year of construction: 2011, Centre height: 330 mm Swing over bed: 660 mm Swing over cross slide: 430 mm Distance between centers: 1500 mm Bed width: 400 mm Spindle mount DIN 55029: A 8 Spindle bore: 82 mm Speed range, 3 steps: 7 – 135, 30 – 550, 110 – 2200 rpm Feed rate X/Z: 3000 / 6000 mm/min Rapid traverse X/Z: 4 / 8 m/min Tailstock quill taper: MK 5 Drive power: approx. 9 kW Dwedel D Rddopfx Ap Ajd Dimensions (L x W x H): 3450 x 1750 x 1770 mm Weight: 2850 kg Equipment / Special features: • Cycle control FAGOR 8055-i A TC with TFT color display • Electronic handwheels • Interface • 4-position tool turret, programmable change via motorized drive • 3-jaw chuck, make BISON, diameter 300 mm • Full enclosure, sliding doors with electric safety interlock • Coolant system • Air-conditioning for the control cabinet • Central lubrication • Machine feet • Lighting • CE conformity Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: good (used), Year of construction: 2020, Geared motor, electric motor, electric geared motor, worm geared motor -Manufacturer: Dalian NET, worm gear motor -Gearbox: Type NMRV 1:10 -Speed: 143 rpm -Engine: Type Y2-90S-4 -Power: 1.1 kW -Protection rating: IP54 -Shaft: Ø 28 x 110 mm -Dimensions: 440/220/H260 mm -Weight: 24 kg Dwsdpfoy Ai T Ejx Ap Aod

Condition: good (used), Year of construction: 2018, Geared motor, electric motor, electric geared motor, worm geared motor -Manufacturer: Dalian NET, worm gear motor -Gearbox: Type NMRV 050 1:100 Djdpfx Apoy Ai N Hs Aowd -Speed: 9 rpm -Engine: Type Y2-802-6 -Power: 0.55 kW -Protection rating: IP55 -Shaft: Ø 25 x 90 mm -Dimensions: 390/200/H250 mm -Weight: 18.8 kg

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: G00399, turning length: 2,000 mm, turning diameter: 560 mm, spindle bore: 82 mm, spindle speed (max.): 2,200 rpm, controller model: FANUC Series oi-TC CNC, TECHNICAL DETAILS Turning diameter: 560 mm Turning length: 2,000 mm Spindle speeds: 2,200 rpm Spindle bore: 82 mm Tailstock quill taper: MK 5 Quill stroke: 150 mm MACHINE DETAILS Control: FANUC Series oi-TC CNC Total power requirement: 7.5 kW Dimensions & weight Space requirement: approx. 3,800 x 1,750 x 1,600 mm Machine weight: approx. 3,800 kg EQUIPMENT 3-jaw chuck 250 mm 6-position tool turret Coolant system Automatic pressure lubrication 1x travelling steady rest 1x fixed steady rest 2x machine lights Djdpfx Aoygxipjp Aowd

Condition: good (used), Year of construction: 2020, electric motor, three-phase motor Djdoy Ai Iijpfx Ap Aowd -Manufacturer: Dalian Keshunwei, electric motor with fan -Type: YSJF 112-12.0/4 -Power: 12 Nm -Speed: 1430 rpm -Shaft: Ø 28 x 60 mm -Design: B5 -Protection rating: IP23 -Fan: Type G-112A, see photo of the nameplate -Dimensions: 450/290/H235 mm -Weight: 34.1 kg

Condition: excellent (used), Brand: DMTG DALIAN Model: CKE 6180 Z Cnc : FAGOR 8055 iT Turning diameter : 800 mm Turning length: 2.000 mm Center height over bed: 400 mm Face slide travel: 420 mm Longitudinal travel : 1.835 mm Dwjdju U Htcepfx Ap Aod Spindle bore: 100 mm Spindle speeds: 40-1000 rpm Feed in X : 0-4000 m/min Feed range Z direction : 0-8000 m/ min Turret : 4 estaciones Chuck diameter 4 jaw: 400 mm Quill stroke: 260 mm Voltage : 400 v Total power requirement: 18,5 kw Machine dimensions : 4.500 x 2.000 x 1.800 mm