Grey Horse LTD

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, MBO Z6 Year of manufacture 2002 Bwodexukm Uspfx Abcow Mobile knife folding unit with independent control Infeed width: min. 150 mm – max. 480 mm Infeed length: min. 80 mm – max. 320 mm Infeed height: min. 450 mm – max. 650 mm Speed: min. 20 m/min – max. 160 m/min Productivity: 15,000 cycles/h Immediately available

Condition: ready for operation (used), Year of construction: 2006, Herzog Heymann Year of manufacture: 2006 Bsdpoxukl Djfx Abcsww Second station with 10 pockets, 35 cm feed width, subsequent slitting shafts (for creasing and perforating), soundproof hood Immediately available

Condition: good (used), Duplo DC-445/DC-F1 Creaser Max 15 creases per sheet 30 job programmable set up and storage Up to 50 A4 sheets per minute Bedpfx Aexui U Dobcoww 110-350gsm nominal paper range 100mm feed pile height Suction feed 0.1mm increments and ±0.3mm accuracy Brochure as PDF

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, Heidelberg Stahlfolder VFZ 52 Bjdoxuif Nepfx Abcoww Year of manufacture: 2008 Max. format W × L (cm): 52 × 36 cm Min. format W × L (cm): 12 × 10 cm Max. speed (m/min): 160 Min. speed (m/min): 25 Max. cycles (pcs/h): 30,000 Feed height (cm): 51.5 – 91.5 Knife position: top / bottom Control: MCT Immediately available

Condition: excellent (used), functionality: fully functional, Mathias Bäuerle Folding Machine CAS 38 Consists of: * FSA 38 flat pile feeder with rear edge separator, double sheet control, and alignment table, total counter, pre-selection counter, sheet monitoring, performance display * Multimaster CAS 38-4 folding unit – 4 automatic adjustable folding plates – manually adjustable folding rollers * Shingle delivery SA from business liquidation Tel. 0173/3435277 Machine is located in Karlsruhe Bsdpfx Absxug Dpocjww

Condition: excellent (used), Year of construction: 2015, machine/vehicle number: 39499, P/N.: 375.501 Counter: 1 Mil. Equipment / Additional information: Voltage: 100 V - 240 V / 50/60 Hz / max 8.0 A Bjdoxug A Eepfx Abcsww

Condition: excellent (used), Automatic paper folding machine. Capable of performing various types of folds (single, letter, double, etc.). Easy and quick format adjustment. Maximum sheet size: 320 × 650 mm. Automatic paper feeding. Quiet and precise operation. Bsdpfxoxtxgae Abcjww

Condition: good (used), Year of construction: 2018, operating hours: 7,500 h, functionality: fully functional, Horizon fulll automatic folder including: • 6 pockets • B1 format • Pallet feeder Bwjdsxtnd Uopfx Abcow • Press Stacker • Working hours: 7600

Condition: used, Year of construction: 2012, functionality: fully functional, Equipment: compressor, Horizon AF-406T6A (2012) Used Bjdpfx Ajxtig Dsbcsww ▪Configurations AF-406A + T-406A + PR-40 + ED-40 ▪Language: Japanese ▪Specifications Machine Structure: 6/6 (6 Buckles and 6 Buckles) Sheet Size: Max. W400 x L650 mm Min. W50 x L100 mm Sheet Weight Range: 30 to 135 gsm Belt Speed: 50 to 180 / min. Voltage / Frequency: 3-Phase 200 V, 50 / 60 Hz Paper Feed Capacity Maximum height: 500 mm Maximum weight: 150 kg Processing Speed A4 fold: 30,000 sheets/ hour

Condition: used, Year of construction: 2023, TECHNICAL DATA AF-408F: Installation: 03/2023 Bsdpfx Absxtanlscsww Counter reading: 990228 folds Running time: 155 hours Machine configuration: 8 pockets Sheet feed formats: (width x length) Max. 430 mm x 660 mm Min. 50 mm x 100 mm Paper weights: 40 - 250 g/m² *Depending on material volume Transport speed: Up to 180 m/min Production speed: Up to 30,000 sheets/h Machine dimensions (width x depth x height): 2,168 x 922 x 1,487 mm KTU-40 mobile knife unit (description): The mobile knife unit can be used for a wide range of applications. Depending on the type of fold, both right-angled and parallel directions can be processed. The integrated upright sheet delivery is designed for easy handling of even the smallest folded products. Two additional folding pockets under the knife can be used for greater application flexibility. Power supply: 230V / 50Hz. Additional accessories: - Pressure/vacuum pump T4.40 - Standard delivery - BG-406 transfer bridge for ED-40 - ED-40 small format upright sheet delivery incl. MT-40 base frame - XL stop for AF-408F All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: used, Stehendbogenauslage mit integrierter Pressfunktion und Markiereinrichtung Horizontal stack delivery with pressing and marking device Bwsdpfx Absxr T Amjcjw Stehendbogenauslage / Horizontal stack delivery Stahl SBP-M 46.D Baujahr 1997 - Serien-Nr. 99836/97-255555 Format / Size min. (Breite × Länge) 120 × 100mm Format / Size max. (Breite × Länge) 460 × 300mm Produktdicke / Product thickness max. 4mm Stapellänge / Stack length 800mm Presskraft / Pressing force 8.000 N  Einlaufhöhe / Infeed high 360-960mm Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Year of construction: 2020, CYKLOS TriFold 360 Folding Machine?for connection to creasing machines (e.g. AirSpeed 450 or others) The CYKLOS TriFold 360 folding machine can be linked to the automatic creasing and perforating machine CYKLOS GPM 450 Speed or CYKLOS AirSpeed 450 (or other comparable creasing machines) to operate as a fully automatic creasing and folding system. Folding is achieved through the combination of manually adjustable fold plates and large-diameter rubber rollers – a simple and cost-effective yet revolutionary solution. All parameters can be adjusted according to the specific application and the speed of the creasing machine.? Special Features - easy connection to CYKLOS creasing and perforating machines AirSpeed 450 or GPM 450 Speed possible? - connection to a wide range of creasing machines from various manufacturers possible? - fold plate adjustment is manual? - standard fold types marked on fold plates: single fold, letter fold, zigzag fold, gate fold, parallel fold? Technical Details - paper weight: 100 – 350 g/m²? - paper size: max. 620 x 360 mm? - folding speed: up to 6,000 sheets/hour (depending on the speed of the creasing and perforating machine)? - easy operation and adjustment of feed, folding and delivery speed as well as suction air?transport table: L620 x W360 mm? - 2 interchangeable lower fold plates for different paper weights? - mobile stand with castors for easy handling - connection: 230 V / 50 Hz? - dimensions: L 1635 x W 565 x H 1310 mm? - weight (net): 113 kg All-Inclusive Service Package Bedpjxr Ah Ssfx Abcsww We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: used, Year of construction: 2015, Horizon AFC-746F Folding Machine with Pallet Feeder, used The Horizon AFC-746F is an advanced combination folding machine designed for efficient paper processing in various formats and weights. This machine has been thoroughly refurbished and offers a premium solution for demanding folding tasks in print shops. Key features: - PFU-74F pallet feeder: allows easy handling of large paper stacks directly from the printing press - User-friendly operation: The machine has a large, color touchscreen control panel for intuitive operation. All common fold formats and paper sizes can be easily selected. - Advanced automation: Automatic setup includes up to 47 adjustments, including feed, roller gap, pocket fold, and knife fold. This allows for quick changeovers without tools. - Versatile folding options: With 6 fold pockets, a first knife and 2 pockets under the knife, plus a second knife, the AFC-746F offers flexible folding options. - New Rollers Technical specifications: - Paper formats: Max. 738 x 1,300 mm (pallet feeder); Min. 210 x 297 mm - Maximum stack height: 1,200 mm when using the pallet feeder - Paper weight: 35 to 209 g/m² - Power supply: Three-phase, 400 V, 12.6 A; 5.3 kW - Dimensions: Length approx. 4,380 mm, Width approx. 1,870 mm, Height approx. 1,680 mm The Horizon AFC-746F is ideal for print shops looking for a reliable and versatile solution for large format processing. With its advanced technology and high flexibility, it efficiently and precisely meets the requirements of modern production environments. Bwsdpfxsxr Ahrs Abcjw

Condition: used, offer consists of: Bsdpfxexr Ag Uo Abceww KL 112 roller - for Herzog + Heymann folders working width 35cm - 325€ / pc. We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

Condition: used, offer consists of: New roller (knurled part 810mm) - for MBO folders working width 78cm - 435€ / pc. We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs Bwodpfx Aboxr Ag Iocow

Condition: used, offer consists of: New roller included ball-bearing - for Horizon folders working width 54-56cm - 400€ / pc. We can also organize the following for you: Bwodpfx Ajxr Ad Tjbcsw packaging, loading, transport ( by ship or plane) including customs

Condition: used, offer consists of: New roller - for Stahlfolder/Heidelberg folders New roller, hand wheel: working width 36cm - 415€ / pc. New roller: working width 36cm - 320€ / Stck. New roller, hand wheel: working width 40cm - 415€ / pc. New roller: working width 40cm - 350€ / pc. Bwedpfx Aexr Ad Hobcsw New roller, hand wheel: 52cm - 415€ / pc. New roller: working width 52cm - 350€ / pc. New roller: working width 56cm - 365€ / pc. New roller: working width 66cm - 400€ / pc. New roller: working width 78cm - 435€ / pc. New roller: working width 82cm - 440€ / pc. New roller: working width 94cm - 485€ / pc. We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

Condition: used, offer consists of: New roller - for MB Bäuerle folders working width 38cm - 360€ / pc. working width 52cm - 400€ / pc. Bodpfx Asxr Adyebcjww We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

Condition: used, offer consists of: New roller Bwedpfoxr Adtsx Abcew - for Stahlfolder/Heidelberg folders working width 56cm - 330€ / pc. working width 66cm - 365€ / pc. working width 78cm - 400€ / pc. ball-bearing for rollers: working width 40-94 cm - 28€ / pc. We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

Condition: used, LCV-54 Horizon Stream Delivery The Horizon LCV-54 Stream Delivery is an efficient and precise solution for stacking folded printed products, specifically designed for use with Horizon folding machines. Key Features - Stream Delivery: The LCV-54 provides consistent and orderly stacking of folded products, facilitating further processing and increasing efficiency Bwodpjxr Aabjfx Abcjw - Height Adjustable: Flexible adjustment of the inlet height allows for optimal integration into various production environments - Wide Compatibility: The LCV-54 is compatible with all Horizon AFC-5xx folding machines Specifications - Inlet Height: Maximum: 911 mm; Minimum: 429 mm - Format Range: Minimum: 128 x 148 mm; Maximum: 558 x 850 mm - Machine Speed: Up to 240 m/min All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: used, Year of construction: 2020, Mobile Knife Fold Unit, Horizon MKU-38, Used The Horizon mobile knife fold unit is a standalone folding unit that can be connected to various folding machines to provide additional folding options. Key Features: - Can be used as a standalone unit or in conjunction with other machines - Fully automatic operation with user-friendly touchscreen control - Compatible with various Horizon folding machines such as AF-series and AFC-series - Flexible folding options with reversible folding mechanism (knife from top or bottom) - Adjustable delivery direction (left or right) - Precise fold positioning through manual adjustment options - Integrated safety features such as emergency stop switch Technical Specifications: - Production speed: Up to 9,500 cycles per hour - Paper size: Max. 380 x 280 mm, Min. 90 x 20 mm - Paper thickness: 35 to 210 gsm - Folding thickness: Up to 2.3 mm or 0.09" thickness of folded sheet - Dimensions: 685 x 858 x 1,283.5 mm (W x D x H) - Weight: 182 kg All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Bwodpfxexrz I Dj Abcew Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: used, Year of construction: 2016, Used Horizon PSX-56 Sheet Press and Stacker The Horizon PSX-56 is a fully automatic sheet press and stacker designed for processing folded sheets or booklets. It can be connected to various Horizon machines as a standalone module. Bodpexrz Iqefx Abcjww Key features: - Presses products after folding for better flatness and sharp edges - Ideal for small to medium print runs - Versatile use for folded sheets and booklets - Compatible with various Horizon machines - Fully automatic pressing and stacking - Electronic measurement of products - Removal of poorly folded products - Precise and mark-free jogging of stacks - Touchscreen control panel for easy settings - Memory for up to 20 jobs - Two operating modes: Single sheet and Stream feeder - Adjustable infeed height Technical specs: - Paper size: Max. 546 x 330 mm, Min. 128 x 92 mm - Stack height: Max. 200 mm, Min. 10 mm - Folded sheet thickness: Max. 4 mm - Production speed: Max. 900 stacks/hour - Infeed height: Adjustable between 440 - 1000 mm - Roller set: 1 pre-press roller pair, 2 press roller pairs - Power: 230 V, 50/60 Hz - Current: 4.5 A - Power consumption: 620 W - Size (W x D x H): 1,940 x 2,280 x 1,080 mm - Weight: Main unit 621 kg, Stacker 24 kg - Paper weight: 52.3 to 157 g/m² (normal paper) 3 MONTHS WARRANTY We guarantee that the machine operates perfectly and we take responsibility for 3 months. Even after this period, we are always there for you and support you in solving any problems. All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: used, Zählgerät mit Kicker zum Versetzen Counter with kicker for moving Zähler mit Kicker / Batch Counter Stahl PCS 100 SN. 9407008 Bedsxrkdnepfx Abcjww Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: excellent (used), Overview The Touchline CPC375 is a high-performance, multifunction finishing system capable of cutting, creasing, and perforating in both lengthways and crossways directions. Designed for digital printers, in-plants, and commercial finishing operations, the CPC375 delivers professional-quality output with minimal setup time. Its automated tool detection and patented changeover unit allow quick adjustments, enabling fast production of vouchers, tickets, coupons, reply cards, and other print products. With support for a wide range of paper stocks and automated operations via a touchscreen interface, the CPC375 combines speed, accuracy, and versatility in a single, compact system. Key Features of the Touchline CPC375 Multi-functional finishing: Cut, crease (positive & negative), and perforate (stop or continuous) in a single pass. Wide paper range: 80–400gsm for cutting/creasing; perforates up to 300gsm. Automated setup: Patented changeover unit allows quick, tool-free swaps; tools detected electronically, and working depth automatically adjusted via touchscreen. Flexible tooling: Dual tool module, cross knife, and lateral rotating longitudinal knives; stores up to three additional tools; up to four perforating heads for length of sheet perforation. High-speed operation: Up to 6,000 sheets per hour, with high-capacity feed load. Large sheet capacity: Maximum sheet size 370mm × 1200mm with table extension. Vacuum conveyor feeder: Supports offline or inline feeding from printers. Touchscreen control: Intuitive interface for easy job setup, adjustments, and monitoring. Complete System Includes Touchline CPC375 finisher with crease, perf and cut – refurbished and fully tested One optional start/stop perforation unit for length of sheet perforation Touchscreen interface for full control and automated adjustments Tool magazine with storage for multiple tools Vacuum conveyor for reliable sheet feeding Why Choose the Touchline CPC375? Versatility: Crease, perforate, and cut multiple paper stocks in one machine. Accuracy: Automatic tool detection and setup ensure precise finishing every time. Ease of operation: Touchscreen interface with quick setup reduces training and changeover time. Productivity: High-speed operation and large sheet capacity handle small and high-volume jobs with ease. Professional results: Produces high-quality output for tickets, vouchers, coupons, cards, and other printed materials. Specifications Manufacturer Multigraf Model Touchline CPC375 Condition Refurbished Stock Number 114963 Min sheet size 105mm x 148mm Max sheet size 370mm x 1200mm with extension Creasing paper weight 80gsm to 400gsm or 0.4mm Perforating paper weight 80gsm to 300gsm or 0.3mm Cutting paper weight 80gsm to 400gsm or 0.4mm Feeder system Suction feed Bedpfoxrdp Dsx Abcsww Control panel Touchscreen Double sheet detection Ultrasonic (standard) Max number of creases/perfs 20 per sheet Possible cuts Front 4-120mm. Centre 4-40mm. End 4-27mm Standard tooling 1 crease bar (2 crease widths), 1 cross perforation tool (11 tpi) Optional tooling Stop/Start rotary perforation. 1 unit included. Option to add 4 in total Electrical requirements 240v 50/60Hz

Condition: used, Year of construction: 2018, Year: 2018 Condition: good Counter Status: 26,500,000 Bwedpfx Abjxqf R Hocsw Configuration: - Pallet feeder - 6 pockets - Automatic rollers set up - Automatic pockets set up - 1+1 knife + pocket - Automatic delivery - Palamides Alpha 500