Steam boiler 6000 kW

WEISS

Condition: excellent (used), CATALOGUE NUMBER 6907 TECHNICAL DATA - Loading hopper inlet at the top: 1980x1050mm - Loading hopper inlet at the bottom: 980x1050mm - Discharge for shredded wood: diameter 210mm - Rotor working width: 980mm - Main motor: 30kW - Pump motor: 1.1kW - Number of knives: 36 pcs - Knife size: 40x40mm - Screen: 18mm - Pusher drawer - Electric auto-reverse - Dimensions (L/W/H): 2100x2030x2070mm - Weight: approx. 3500kg – French-made – Similar to WEIMA WL 10 – New knives installed – Auto-reverse – Pusher drawer – Very good condition – Used shredder Net price: 88,900 PLN Net price: 2,160 EUR Net price calculated at exchange rate of 4.2 PLN/EUR Dedsyyzitopfx Adwocf (in case of major rate fluctuations, price may change)

Condition: used, Year of construction: 2010, functionality: fully functional, Max. working temperature 90° C. Max. working pressure: 2 kg/cm². Power 3.000.000 kcal Fuel: wood waste The MTN boiler is a hot water generator that uses sawdust as fuel, with "AUTOFOCO" type burner loading. The boiler is of horizontal type Tubular plates and shell are made of thick carbon steel sheet. The core is covered with refractory cement with a high percentage of alumina. At the rear there is a cast iron grate for burning solid pieces of wood, calculated for an output equal to 60% of the rated output of the boiler. The tube bundles are made of carbon steel. The base incorporating the hearth is of large dimensions, to allow the burner to be mounted with a plug. The boiler is supplied with an air distribution manifold. The boiler body is insulated with mineral wool and covered with cast iron Accessories: - 1 Adjustable thermostat - 1 safety thermostat - 1 safety thermostat with manual start - 1 thermometer - 1 hydrometer - 1 combustion control device - 1 thermostatically actuated valve positioned in the flue tube MANUAL FEED GRILL is a fixed grill made of special nodular cast iron bars, fixed in refractory material, easily interchangeable. 1 Complete electrical components, motor protections, contactors. 1 Complete set of wiring accessories 1 General circuit breaker 1 Power supply for auxiliary circuits 1 Circuit diagram 1 Pressure gauge 2 Temperature probes 1 Dust suction system consisting of a fan with belt transmission, with decanter cyclone, boiler-cyclone connections, cyclone-fan, fan-fan, fan-smoke stack, in painted carbon steel. Dedstywzqjpfx Adwecf 1 Chimney

Year of construction: 2019, condition: good (used), Weiss Model: WK 10/40-80 Test chamber volume approx. 10 m³ 10 m³ = 10,000 liters Modular climate test chamber Weiss WK 10/40-80 Version: water-cooled refrigeration unit Refrigerant type: R449A Special equipment for battery testing: The climate test chamber is equipped with extended safety features for battery and accumulator testing (e.g. lithium-ion): • Pressure relief flap for controlled pressure release in the event of a malfunction • Gas warning device for early detection of critical gas concentrations • Fire suppression system with SalgroMAG aerosol extinguishing generators This equipment significantly increases safety during battery testing and supports use in development and testing environments (subject to a customer-provided safety concept / BMS). Description: For sale is a professional climate test chamber from Weiss Technik, model WK 10/40-80, year of manufacture 2019. The unit is used for temperature and climate testing and is ideally suited for industry, research, development, and quality assurance. The system allows for temperature and humidity testing across a wide range and is designed for continuous operation in industrial and development laboratories. Particularly suitable for: - Functional and service life testing - Material and component testing - Pre-aging and climate simulation Dcodpfxeyyu Rqe Adwsf - Conditioning of samples - Testing of batteries and accumulators (e.g. lithium-ion) under defined climate conditions (subject to customer safety concept / BMS) Operation is via a modern S!MPAC® control system with web panel, programs can be stored and automated. The system was in operation until recently and is fully functional. General information: Manufacturer: Weiss Umwelttechnik GmbH Model: WK 10/40-80 Year of manufacture: 2019 Condition: used, functional CE marking: available Made in Germany Control system: S!MPAC® control Web panel / touch operation Program and time control possible Temperature & Climate: Temperature range: −40 °C to +80 °C Temperature accuracy: ± 1 K Humidity range: 10 % to 95 % RH Humidity accuracy: ± 5 % Dimensions: External dimensions (W×D×H): approx. 3,300 × 5,000 × 2,500 mm Internal dimensions (W×D×H): approx. 3,000 × 2,200 × 1,500 mm Test chamber volume approx. 10 m³ Media & Systems: Spray system: water pressure 3 bar Compressed air connection: min. 5 bar Refrigerant: R449A Electrical data: Mains connection: 3/N/PE, 400 V AC ±10 %, 50 Hz Rated power: approx. 44.9 kW Rated current: approx. 74 A Weight: approx. 3,900 kg Scope of delivery: Climate test chamber Weiss Technik WK 10/40-80 Control / web panel Operating manual (German) Nameplate & documentation Condition: used Scope of delivery: (see image) (Change and errors in technical details and specifications excepted!) For further questions, please feel free to contact us by phone.

Condition: good (used), Remote-controlled quick clamping cars fully hydraulic with hydraulic Dcjdpfx Aed Nqrqsdwof Help car. Track width 840 mm. Control Panel and electric control cabinet.

Condition: excellent (used), Year of construction: 2007, power: 1,600 kW (2,175.39 HP), Complete heating system Polzenith 1.6 Mw, 2007 The heating system consists of: Dcedovlkdxepfx Adwsf - Fuel storage. Steel construction with moving floor - Scratch requirement - Electric filter Beth with electrical cabinet - Chimney 12m - All smoke lines - Complete with electrical and hydraulic system Very good facility. Ready dismantled, ready for loading.

Condition: excellent (used), CATALOGUE NUMBER: 6943 TECHNICAL DATA - Feed hopper inlet: 1600x1500mm - Rotor working width: 1500mm - Main motor: 45kW Dcedpjyk Hfysfx Adwsf - Pump motor: 5.5kW - Number of knives: 44 pcs - Knife dimensions: 50x50mm - Screen: 59mm - Pusher drawer - Auto-reverse - Dimensions (L/W/H): 3430x2800x2850mm - Weight: approx. 9000kg ADVANTAGES – French manufacture - New knives installed – Auto-reverse – Pusher drawer – Very good condition – Used shredder Net price: 159,900 PLN Net price: 38,070 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), Weiss Type: TempEvent T/1000/70/5 Water-cooled Temperature Test Chamber 1000 liters Description: For sale is a high-quality climate test chamber from Vötsch Industrietechnik (Weiss Technik), model TempEvent T/1000/70/5. This unit is used for simulating temperature conditions and is ideally suited for: - Material testing - Electronics testing - Environmental and aging tests - Quality and endurance testing The chamber can generate extremely low temperatures down to approx. -70 °C as well as high temperatures up to +180 °C, with the ability to change temperatures at defined rates (temperature ramps). Precise control enables reproducible test conditions. Operation is user-friendly via an integrated touch panel. Key features: - Fast temperature changes (up to 5 K/min) - Uniform temperature distribution in the test space - Water-cooled system - Industrial standard – robust construction - Maintenance indicator and operating hours counter Technical data: Model: TempEvent T/1000/70/5 Temperature range: approx. -70 °C to +180 °C Temperature change rate: up to 5 K/min High precision & stability: Temporal temperature deviation: ±0.1 to ±0.5 K → highly stable temperature over time Spatial deviation: ±0.5 to ±1.0 K Dcodpjyxm Ulofx Adwef Temperature gradient: ≤ 2.0 K This makes the chamber ideal for demanding testing processes requiring high repeatability. Test space: approx. 950 × 1100 × 950 mm (W × H × D) External dimensions: approx. 2000 × 1415 × 2030 mm (W × H × D) Side access ports: 50 cm / 125 cm Electrical data: 400 V / 3~ / 50 Hz Rated current: approx. 34 A Power: approx. 21 kW Refrigerants: R449A (approx. 2.9 kg) R23 (approx. 1.3 kg) Weight: approx. 1200 kg For your peace of mind as a buyer, please note the following: The following points are carried out on all our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful checks, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Specifications and technical details subject to change and error!) For further questions, we are happy to assist you by phone.

Condition: excellent (used), Year of construction: 2009, Selling thermal power plant. Very good working condition. Djdpfx Adsxf Nxwewjcf

Condition: excellent (used), Weiss Weiss Climate Test Chamber WKL 100/70 -70°C to +180°C, Humidity, 100 Litres Compressor has been replaced! Air-cooled For sale is a professional climate test chamber from Weiss Umwelttechnik. This equipment is ideal for material testing, climate tests, as well as temperature and humidity simulation in industrial environments, laboratories, or R&D. The test chamber provides precise test conditions for extreme temperatures and high humidity levels. Data for Temperature Testing: - Temperature range: -70 to +180°C - Temporal temperature deviation at the centre of the usable space: ± 0.3 to ± 1 K - Spatial temperature uniformity (based on setpoint, range tmin to +150°C): ± 0.5 to ± 2 K - Temperature change rate: Heating 3.5 K/min, Cooling 3.5 K/min - Heat compensation: max. 700 W Data for Climate Testing: - Humidification system: - Reservoir capacity: approx. 13 l - Water quality: demineralised - pH value: 6 – 7 - Conductivity: max. 20 μS/cm - Water consumption at constant temp. +40°C, 92% r.h.: 2 l / 24 h - Temperature range: +10 to +95°C - Humidity range: 10 to 98% r.h. - Temporal temperature deviation at the centre of the usable space: ± 0.3 to ± 0.5 K - Spatial temperature uniformity (based on setpoint): ± 0.5 to ± 1.5 K - Temporal humidity deviation at centre: = 1 to ±3% r.h. Dcjdpsyw Nnfjfx Adwsf Internal dimensions: Height 400 mm, Width 470 mm, Depth 345 mm External dimensions: Height 1776 mm, Width 745 mm, Depth 980 mm Mechanical Load Data: - Maximum load of test compartment floor: 10 kg - Per shelf: 10 kg - Total rack load: 50 kg Operating Data: - Test compartment lighting: Halogen bulb 24V, 50W - Rated voltage: 1/N / PE AC 230V ±10% 50 Hz - Rated power: 3.5 kW - Rated current: 15.2 A - Customer-side fuse: 16A slow-blow - Protection rating: Control cabinet IP 22 and touch panel IP 54 Heat Dissipation (air-cooled chambers): - Max. heat output to environment: 2500 W Noise Level: - Sound pressure level (free-field measurement at 2 m in front, 1.0 m height): approx. 59 dB(A) Feedthrough: 50 mm ∅ Interfaces: Ethernet interface (RJ45), USB interface Refrigerants: R404A / R23 Test chamber volume: approx. 100 litres Weight: 210 kg Important Information for Buyers: For your safety, we perform the following steps before sale of our chambers: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certification 4. After successful testing, each chamber undergoes a documented trial run. Condition: used Scope of delivery: (see picture) (Specifications and information may be subject to change and error!) Feel free to contact us by phone for any further questions.

Condition: good (used), Year of construction: 2013, grinding diameter 390 mm grinding length 650 mm centre height 200 mm total power requirement 46 kW weight of the machine ca. 6 t dimensions of the machine ca. 3x3x2,4 m Universal cylindrical grinding – Type WUG21 (W27) Grinding length 650 mm EMAG Weiss stands for high-end technology in universal cylindrical grinding between centres. With its CNC-controlled WUG 21 machines, EMAG Weiss offers the right solution for virtually every user. --> Technical data Max. grinding length: 650 mm --> Centre height: 200 mm --> External grinding diameter: 1 – 390 mm --> Max. weight flying MK4: 100 kg --> Max. workpiece weight between centres: 250 kg --> Feed: --> X-axis travel: 480 mm --> Z-axis travel: 1.150 mm --> Workpiece headstock --> Tailstock --> Grinding spindle headstock Djdpfjw Inr Nox Adwocf --> Coolant device, manufacturer HYFRA, --> Belt filter, manufacturer Knoll, type KF 200 - year of manufacture 2012, --> Oil mist filter, manufacturer Cobaron

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, nominal power (apparent): 3,000 kVA, Industrial hot water boiler 3,000,000 kcal/h. Rated power: 3,000 kcal, approximately 3.4 MW. Dsdpfxot Ngfie Adwecf

Year of construction: 1978, condition: used, machine/vehicle number: 5181, temperature: + 10 to + 80°C usable space: width 1200 mm Dedpfo Dq Adjx Adwjcf depth 1600 mm height 1750 mm electrical connection: 220 V space needed: 1550 x 1900 x 2200 mm high weight: 500 kg

Condition: new, We offer you spare parts of all kinds for your conventional or CNC Karstens / EMAG WEISS / GP cylindrical grinding machine—covering your tailstock, workpiece headstock, grinding spindle headstock, ball screw spindles, glass scales, grinding wheel flanges, drive motors, axis drives (BOSCH SIEMENS), ECKELMANN controls, bellows, bearings, K11/K21 infeed controls (new and used), as well as Z-axis reversing blocks for exchange. We service machines from year of manufacture 1955 onwards: ASA-ASE-K10-K11-K12-K13-K16-K19-K21-K22-K23-K24-K25-K26-K27-K28- K29-K33-K35-K37-K50-K51-K52-K53-K57-W11-W21-GP cylindrical grinding machines—all assemblies based on Karstens design. Dcedjup Aikopfx Adwof Comparable/ EMAG-WEISS/ GP cylindrical grinding machines/ Studer/ Kellenberger/ Schaudt/ Tschudin/ Tacchella/ Dannobat.

Condition: used, Year of construction: 1986, functionality: fully functional, heating capacity: 1,500 kW (2,039.43 HP), nominal heat output: 1,500 kW (2,039.43 HP), operating pressure: 6 bar, pressure: 6 bar, Equipment: documentation/manual, hot water, We are offering this used MAWERA FU 1300 RA heating system, year of manufacture 1986. Includes control cabinet, flue gas cleaning, and induced draft fan. Model: FU 1300 RA Year: 1986 Nominal heat output: 1,500 kW Permissible operating overpressure: 6 bar Permissible flow temperature: 120°C Price: €5,000 We are also offering a used MAWERA FU 550 RIA heating system, year of manufacture 2001. Model: FU 550 RIA Year: 2001 Nominal heat output: 550 kW Permissible operating overpressure: 6 bar The FU 550 RIA has already been dismantled. Price: €4,500 In addition, the shared push floor discharge system with twin auger and hydraulic power unit, as well as an Eder pressure maintenance and degassing system, are available for sale. Dimensions of the system can be found in the pictures. Dsdoykmd Aopfx Adwscf Prices apply to the boilers only. The system is still in operation and can be inspected at any time. Scheduled dismantling date: mid-May 2026. Dismantling by the seller is possible; dismantling costs will be charged separately. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), Weiss Type: WK 27'/50-150 Climatic Test Chamber Water-cooled Technical Data: Test Chamber Designation: WK 27'/50-150 External Dimensions Height 3500 mm, Width 3400 mm, Depth 6000 mm Control Cabinet Dimensions Height 2000 mm, Width 2400 mm, Depth 400 mm Internal Dimensions Height 3000 mm, Width 3000 mm, Depth 3000 mm Floor load capacity: 30,000 N/m³ (surface load) Test chamber volume: approx. 27,000 liters Specimen mass: 1000 kg Cooling / Heating Operation -50°C to 150°C Heating rate: 1.0 K/min Cooling rate: 1.0 K/min Temperature stability: ±0.3 to 1.0 K (over time) Temperature stability: ±0.1 to 0.5 K (over time) Climatic Operation Dcedpfx Adovx Nfbowsf 10 to 90°C Humidity: 10...98% rH Temperature stability: ±0.1 to 0.5 K (over time) Dew point range: +4 to +84°C 3/N / PE AC 400 V ±10% 50 Hz Weight: 7000 kg Refrigerants: R23 and R404A Equipped with extra floor plates to increase floor load capacity Important safety information for buyers: The following steps are carried out on all chambers we offer in advance: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant 3. After successful inspection, the chambers undergo a trial run monitored with calibrated equipment. Condition: used Scope of delivery: (see picture) (Subject to alterations and errors in the technical data and specifications!) If you have further questions, we are happy to assist you by phone.