Some blasting equipment for sale

USF, Gietart, Wheelabrator, GF

Year of construction: 2001, Condition: used, Technical details: Numbers of turbines: 1 Stck. drum length: 580 mm operating hours: 30.810 h compressed air: 5 - 7 bar filling volume: 100 dm³ total power requirement: 24,2 kW total wight: ca. 5,8 t DRUM - Shotblasting Plant in a closed drum Manual and automatic operation technical specifications: -spinning wheel Ø = 380mm -drum Ø = 1150 mm x length 580 mm -max. filling weight = 220 kg, filling volume 100dm³ -piece size (max. edge length) = 100mm -Turbines 380mm; 15.0 kW -blast media discharge speed approx. 80.0 m/s -Ablast media throughput/turbine approx. 240.0 kg/min. -Steel abrasive grade, nothing else possible! (recommended is: StD-Z 0,6 DIN 8201 HV 700) -Compressed air with cartridge filter system approx. 12 m³/h The plant is not electrically connected. Sale as currently is at the warehouse Leipzig (see last photos). Machine has been functional before dismantling. Bsh7Isfik2I *

Year of construction: 2009, Condition: used, Please contact us for more information. Z2Xmpgnlw

Condition: good (used), Centrifugal quick-release chucks, centrifugal chucks, three-jaw chucks -Outer: Ø 270 mm -Clamping range: Ø 90-140 mm -Take: Ø 140 mm -Hole circle: Ø 170 mm Qk8Dfgk8K -Weight: 25 kg

Condition: refurbished (used), Year of construction: 2008, GF AgieCharmilles Progress V3 Year of manufacture 2008 Travel paths: X= 500 mm, Y= 350 mm, Z= 426 mm Travel paths U/V axis: +/- 70 mm Maximum conicity: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 420 mm Maximum workpiece weight: 400 (in bath) / 800 (without bath) kg Achieveable surface quality: Ra: 0.20 µm Maximum cutting rate: 500 mm²/min Available wire diameters: 0.15 – 0.33 mm Water bath machine with automatic wire threading and re-threading after wire breakage With manual front door (accessible from 1 side) Incl. AGIEJOGGER handbox for comfortable Setting up AGIE IPG-V generator AGIEVISION 5 control Dimensions (length x width x height): 1940 x 2300 x 2600 mm Net weight: 3460 kg The machine is cleaned and overhauled after receipt of the order. You receive a 6-month warranty on all machine parts. Togmpdrm0 We are also happy to offer you commissioning and training

Condition: good (used), Year of construction: 2002, operating hours: 1,008 h, Functionality: fully functional, type of input current: three-phase, total height: 4,310 mm, total width: 2,372 mm, total length: 2,565 mm, input voltage: 400 V, power: 20 kW (27.19 HP), overall weight: 5,000 kg, workpiece weight (max.): 2,500 kg, operating pressure: 7 bar, inner dimension height: 1,000 mm, inner dimension length: 1,500 mm, turntable diameter: 1,500 mm, Equipment: documentation/manual, We sell a hanging - table jet blaster. The jet has a table load capacity of 2.5t. Possibility of using as a hanging jet blaster, maximum hook load capacity of 300kg. The jet blaster has a filter in it and the extraction works as a compact. Everything is inside the machine. It does not have external extraction. It is possible to try it, it is under voltage. Everything can be obtained and is still being produced. The total power of the engines is Turbine 2 x 7.5kw. Abrasive transport and extraction approx. 6kw. Total approx. 20kw. I will recommend the manufacturer with spare parts. Blade set: €245.00/set Blade spring: €1.15/pc C0Ujlub7 Top plate: €82.50/pc End plate: €82.50/pc Impeller: €86.00/pc Impeller casing: €93.70/pc SAF35 carrier: €95.00/pc Throwing wheel: €718.00/pc Metal unit housing €768.00/pc Metal unit housing lid €32.40/pc Otherwise the machine is functional, very little used. I will pack some blades as spare parts.

Condition: good (used), Year of construction: 2011, +GF+ AgieCharmilles Form 3000 HP EDM Die-Sinking Machine with Vison 5 Control X-axis Travel 600mm. Y-axis Travel 400mm. Z-axis Travel 500mm. Positioning speed in Manual mode, X / Y / Z axes 2 m/min. Z Axis Acceleration 10.0 m/s2. X/Y/Z axis resolution 0.1 μm. Laser correction X / Y / Z axes linearity / angularity / screw pitch. Work area Table Machine Plate with Grid Holes 50mm. Distance between table and spindle min./ max. 200 ÷ 700mm. Table ground distance 1000mm. Maximum table dimensions, length x width: 850 x 600mm. Dimensions of the work tank length x width x height 1280 x 1040 x 450mm. Nominal connection capacity 9 kVA (140 A variant). Current 13 A (140 A variant). Mains voltage 3 x 400 V ± 10%, 50/60 Hz (50 Hz standard). Cooling water Temperature: Ambient temperature − 7° C, Quantity: approx. 20 l/min. Integrated C-axis ECO Type ACCURA.Maximum electrode weight 50kgs. Rotational speed 0 ÷ 100 rpm. Maximum inertia 5,000 kgs.cm2. Positioning accuracy ISO230-2 0.007°. Resolution 0.0005°. Max. workpiece weight 800 kg 2,000 kg. Max. workpiece dimensions 1200 x 800 x 350mm. Dielectric level 0 – 390 mm. S/No.162. Dqv7Sj with Windows XP operating system. Data Input 15" LCD Color Screen, Mouse or Touchscreen, Keyboard and manual control VISION 5 User Surface.

Condition: reconditioned (used),  Wheelabrator Euro 80 Tumblast machine complete with: • 2 off 30kW blast wheels • Max. Load 2,500kgs • Max piece weight 220kgs • Chamber diameter 1800mm • 4BE air-wash separator • Hydraulic door • Mill torque converter drive  Platform extension with access ladder  Vibratory bottom screen  Media storage hopper with twin abrasive gates  Particle elevator  New hydraulic loader  Hydraulic power-pack Dnh7J2  New PLC electric control panel with HMI screen  Electrical trays and cabling Available • Transport to site • Unloading and positioning • Mechanical and electrical assembly • Commissioning and hand-over Excludes – dust extractor, ducting, vibratory discharge, power/air connections, civils.

Condition: used, Used Bottle Inspector GF HAWK 24 000 BPH Characteristics of the machine and of the products handled It is made through: – traditional commands (push button panel) – PC hardware (video, keyboard and mouse) Traditional commands In order to allow quick and safe intervention by the operator, the controls have been provided of a traditional type; for example: – machine stop – machine running – etc. PC hardware The machine is equipped with the main hardware elements of the PC, such as: – video – keyboard – mouse Ambient temperature In order not to jeopardize the safety and optimal operation of the machine, follow the values ​​indicated: – storage temperature: from -10 to 60 ° C – ambient operating temperature from 10 to 45 ° C – temperature inside panels: Power electrical cabinet: Dqri3P – electrical power cabinet temperature: t.MAX. <45 ° C obtained with a ventilated cabinet. Vibrations The machine was designed and built in compliance with the directives in force and with the permitted level of vibrations. MANUAL AND ELECTRIC DIAGRAM AVAILABLE.

Condition: ready for operation (used), Year of construction: 2016, Functionality: fully functional, workpiece weight (max.): 1,000 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, total height: 2,320 mm, total length: 3,400 mm, total width: 2,160 mm, workpiece height (max.): 350 mm, workpiece width (max.): 800 mm, workpiece length (max.): 1,030 mm, type of input current: three-phase, table width: 630 mm, overall weight: 5,440 kg, table length: 950 mm, net weight: 4,440 kg, feed rate X-axis: 3 m/min, feed rate Y-axis: 3 m/min, feed rate Z-axis: 3 m/min, table load: 1,000 kg, input voltage: 380 V, tank capacity: 1,000 l, Equipment: cooling unit, documentation/manual, fridge, Wire EDM machine Manufacturer: GF Machining Solutions Model: CUT E 600 Year of manufacture: 2016 Travels: X / Y / Z: 600 / 400 / 350 (mm) Extras: 16kg spools Condition: Very good and well maintained condition Terms of payment: 100% before disassembly and loading We are a tool shop and are downsizing our production. We bought the machine new in 2016 and it has been in use with us ever since. The machine is under power and will continue to be used. A viewing and trial run are possible. The machine can be handed over at short notice by arrangement. We can also offer the following with a purchase: - Training of your personnel - Cleaning of the machine - Attachment of transport locks - Loading onto the truck - Transportation with our own truck - Unloading at your site - Bringing the machine to your location Bhnfg8Op - Alignment of the machine - Connecting and commissioning

Condition: reconditioned (used), Year of construction: 2021, Functionality: fully functional, GF Machining Solutions CUT P550 Pro Year of manufacture 2021 Uniqua control Travel paths (X / Y / Z): 550 x 350 x 400 mm Travel paths (U / V): 550 x 350 mm Max. taper angle: +/- 30° at 400 mm height Integrated Collision Protection (ICP) on all 5 axes Maximum workpiece dimensions: 1200 x 700 x 400 mm Maximum workpiece weight: 1500 kg Cutting speed of 400 mm²/min Best surface: Ra 0.08 µm Available wire diameters: 0.15 to 0.33 mm Dqxg97 Incl. wire cutter Incl. 3D probe Dimensions of the complete system: 2600 x 2640 x 2340 mm Total weight of the system: 3300 kg The machine is still in use by our customer and will be cleaned, serviced and thoroughly tested by us before delivery. You receive a 6-month warranty on the machine. We would be happy to offer to commission the machine for you.

Year of construction: 2001, Condition: ready for operation (used), Shot Blasting Machine, PARTICLE BLASTING MACHINE, Shot Blaster Units, , Schlick Particle Blasting, Roto-jet, Used Machine Dnuqgl Manufacturer: USF SCHLICK, Heinrich Schlick Model: Roto-Jet, 24/23457 Year: 2001 Installation dimensions: 4560 x 3920 x 5080 mm Electrical Cabinet, PLC: - Siemens S7 1200 - Servomotor Controller 2 - Siemens Simatic HMI Display - 400 V ; 20 A Particle Blasting Chamber: Equipped with a servomotor, which synchronously drives the rotating table and the screw conveyor. Another servomotor provides the vertical movement of the particle sprayers. The chamber is lined and has doors that can be opened from multiple sides, with one side having a lifting opening. Table size: 900 mm in diameter. Maximum object size that can be placed: 1000 mm x 1000 mm in diameter Extraction System: Ensures the extraction of dust resulting from spraying, which it can perform in its own airspace. Equipped with bag filters on the exhaust side and cartridge filters on the extraction and dust separation side. Cup-type Distributor and Particle Sprayer Tank: The cup-type distributor transports the shot to a collector after the screw dispenser, which has a 3-stage filter for cleaning the particles (vibrating filter). The tank has outlets where the dosage of particle spraying can be regulated. - It is possible to connect to 10 adjustable particle spraying points. - Currently, 5 particle spraying points are connected.

Condition: good (used), Year of construction: 2007, operating hours: 12,462 h, Functionality: fully functional, feed length X-axis: 1,850 mm, feed length Y-axis: 1,400 mm, feed length Z-axis: 905 mm, spindle speed (max.): 15,000 rpm, table load: 5,000 kg, Equipment: documentation/manual, Machine in in good working condition with Heidenhain controller, HSK63 high torque spindle, making finishing on big molds. The machine comes with fully load magazine with tools with diverse tools. Machine has as extra option: - Pallet magazine with 3 pallets and 2 stand by station that can be prep while machining, pallet size 1000x1250 - 1 Renishaw probe - laser tool measuring system. - High pressure coolant thru spindle - Band Filtration - Chip conveyor - Chiller - Rotational window - Suction and mist collector Jowkslrgg The front window was damage 1 month ago, if requested we could change it before, the change will be done by GF team and will be tax according to repair price offer. If requested the machine can be clean before pickup. All the specs of the machine can be found in attachment. Price do not VAT, include transport, preparation or lifting on truck. If the purchases is until 25'th of January crane an loading preparation will be free

Condition: repair required (used), Year of construction: 2008, operating hours: 4,000 h, Functionality: limited functionality, Shotblasting machine for plates and europrofiles. 2.6 m width, 0,5 m height, 12 m infeed and 12 m outfeed motorised rollers. Machine is in working condition but needs a specialist that can do some refurbishments. Some refurbishments made already: - new suction ventilator motor, new turbine blades, interior protection plates like new, new elevator belt, new coupling between 1 turbine and motor. Needs refurbishments: C0Dnp37Fcq - electrical cabinet (machine runs with a new controlling system, old control panel is not setup and not functional) - brush repair (present but defective - we are not using it) - electrical connections and sensors (some of them present but not used)

Year of construction: 2007, Condition: good (used), GIETART. SPRINT 1.4. YEAR OF MANUFACTURE: 2008. C/W 20 meters of powered KALTENBACH T13 infeed Rollers . 20 meters of powered KALTENBACH T13 outfeed rollers. 6 X 11 meters Lift and Carry Infeed Crosstransfers. 6 X 11 meters Lift and Carry Outfeed Crosstransfers. Ccbtwzo

Condition: ready for operation (used), Year of construction: 2018, Functionality: fully functional, workpiece weight (max.): 1,000 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, total height: 2,320 mm, total length: 3,400 mm, total width: 2,160 mm, workpiece height (max.): 350 mm, workpiece width (max.): 800 mm, workpiece length (max.): 1,030 mm, type of input current: three-phase, table width: 630 mm, overall weight: 5,440 kg, table length: 950 mm, net weight: 4,440 kg, feed rate X-axis: 3 m/min, feed rate Y-axis: 3 m/min, feed rate Z-axis: 3 m/min, table load: 1,000 kg, input voltage: 380 V, tank capacity: 1,000 l, Equipment: cooling unit, documentation/manual, fridge, Wire EDM machine Manufacturer: GF Machining Solutions Model: CUT E 600 Year of manufacture: 2018 Travels: X / Y / Z: 600 / 400 / 350 (mm) Extras: 16kg spools Condition: Very good and well maintained condition Terms of payment: 100% before disassembly and loading We are a tool shop and are downsizing our production. We bought the machine new in 2018 and it has been in use with us ever since. The machine is under power and will continue to be used. A viewing and trial run are possible. The machine can be handed over at short notice by arrangement. We can also offer the following with a purchase Bsbshvffgxi - Training of your personnel - Cleaning of the machine - Attachment of transport locks - Loading onto the truck - Transportation with our own truck - Unloading at your site - Bringing the machine to your location - Alignment of the machine - Connecting and commissioning

Year of construction: 2012, Condition: refurbished (used), Functionality: fully functional, GF AgieCharmilles CUT 2000 Year of construction 2012 Equipped with AWC (Automatic Wire Changer) for the use of two different wire diameters Travels: X= 350 mm, Y= 250 mm, Z= 256 mm U/V axis travel: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200/450 kg AGIE IPG-V generator Achievable surface quality: Ra: 0.05 µm Available wire diameters: 0.07 - 0.30 mm Water bath machine with automatic wire threading With automatically lowerable container (accessible from 2 sides) Incl. AGIEJOGGER hand box for convenient set-up Incl. AGIESETUP 3D Incl. glass scales for X- and Y-axis VISION 5 control unit 15" LCD color screen, lifting keyboard and mouse Dimensions (length x width x height): 2095 x 1950 x 2232 mm Net weight: 3600 kg Incl. 6 months warranty The machine is completely overhauled and tested by us. An individual test cut is also possible. Nnqpk2Stih We also offer commissioning and on-site training for this machine.

Condition: refurbished (used), Year of construction: 2011, Machine coming from the Swiss watch industry in excellent condition.   X-Axis Travel (mm): X-Axis Travel (mm): X-Axis Travel (mm): Worktank length: Worktank width: Worktank height: Max. workpiece length: Max. workpiece width: Max. workpiece height: Max. workpiece weight: Cz9Mblhhvc Taper angle/height: Automatic Wire Feeding: Length x width x height: Weight (kg): Worked power hours: The technical data and illustrations are not binding. They are not warranted characteristics and are subject to change.

Condition: used, Stretch blow molding machine from Etek ISBM Line = Injection stretch blow molding Stretch blow molding machine for disposable PET bottles made from PET preform blanks Stretch blow molding machine for production in rotary transfer mode Manufacturer: ETEK / GF-Industries Type Supra 800 sv 1 Serial number: 22000225 Sbihj Year of manufacture: 2012 Power: 90 kW Mains connection: 400 Volt, 50 Hz own weight approx. 6000 kg mint condition

Year of construction: 2007, Condition: good (used), GIETART 1500 Dqm7Tt 4 Turbines. DCE Unit. Sound proof enclosure. Infeed Outfeed Rollers Outfeed Crosstransfers.

Condition: like new (used), Year of construction: 2021, operating hours: 600 h, Functionality: fully functional, GF AgieCharmilles CUT P 350 Year of manufacture 2021 Travel paths: X= 350 mm, Y= 220 mm, Z= 220 mm Travel paths U/V axis: U= 350 mm, V= 220 mm Maximum conicity: +/- 30° at 220 mm height Maximum workpiece dimensions: 800 x 550 x 220 mm Automatic lifting door accessible from 1 side (820 mm opening width) Maximum workpiece weight: 750 kg Achieveable surface quality: Ra: 0.08 µm Maximum cutting speed: 400 mm²/min Water bath machine with automatic wire threading Available wire diameters: 0.15 - 0.33 mm Closed diamond wire guides for various Wire diameter Rhkt0Ecd3 Collision protection on all 5 axes (ICP) AC CUT HMI-2 control 19" TFT touchscreen with mouse and keyboard Incl. LAN connection for network integration and USB for data transfer Hard chrome-plated machine table Wire guides 0.25mm Dimensions (length x width x height): 2050 x 2234 x 2154 mm Net weight: 2450 kg

Condition: refurbished (used), Year of construction: 2008, Functionality: fully functional, travel distance X-axis: 700 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 400 mm, workpiece weight (max.): 2,000 kg, quill stroke: 400 mm, distance table to quill: 215 mm, workpiece length (max.): 920 mm, workpiece width (max.): 550 mm, workpiece height (max.): 550 mm, overall weight: 4,000 kg, Die-sinking EDM machine GF AgieCharmilles Spirit 4 Year of construction 2008 Travel (X/Y/Z): 700 x 500 x 400 mm Max. Workpiece dimensions: 920 x 550 x 370 mm Max. Workpiece weight: 2000 kg Distance table - quill: 215 -615 mm Bath level up to 415 mm Incl. pneumatic chuck 3R-Systems or Erowa ITS 50 of your choice Dr9Rhknu7 Incl. 28-fold electrode changer Max. Electrode weight: 80 kg Incl. C-axis with U=0-40 rpm Total weight (without dielectric): 4000 kg Dimensions: 3000 x 3000 x 2865 mm The machine is cleaned, serviced and tested by us after receipt of order. We are happy to offer you the following additional services and products: - Commissioning - transportation - training - Clamping devices - Dielectric - Cooling unit

Condition: refurbished (used), Year of construction: 2011, Functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, workpiece weight (max.): 200 kg, quill stroke: 250 mm, workpiece length (max.): 800 mm, workpiece width (max.): 500 mm, warranty duration: 6 months, workpiece height (max.): 265 mm, year of last overhaul: 2024, GF AgieCharmilles FORM 20 overhauled die-sinking EDM machine year of construction 2011 Traverse paths (X/Y/Z): 350 x 250 x 250 mm Max. Workpiece dimensions: 800 x 500 x 265 mm Max. Workpiece weight: 200 kg Integrated C-axis, speed U=0-50 1/min Manual bath height adjustment: 140-310 mm APG FORM generator with 72 A Removal rate: 750 mm³/min Best surface finish: Ra 0.2 µm Dqm2Xj 4-fold electrode changer in the magazine Operation via 15" flat screen with mouse Jogbox for manual operation Simple program creation via AEP Machine dimensions: 1300 x 1850 x 2500 mm Total weight: 2000 kg The machine is cleaned, fully serviced and extensively tested by us. We are happy to offer you the following options: - transportation - Commissioning and instruction - Clamping device - Dielectric

Condition: reconditioned (used), Year of construction: 2011, Functionality: fully functional, workpiece weight (max.): 400 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, total height: 2,200 mm, total length: 2,500 mm, total width: 2,500 mm, workpiece height (max.): 250 mm, workpiece width (max.): 680 mm, workpiece length (max.): 900 mm, table width: 700 mm, overall weight: 3,000 kg, table length: 480 mm, Equipment: cooling unit, documentation/manual, GF AgieCharmilles CUT 20P Year of manufacture 2011 Wire EDM machine with automatic wire threading and rethreading after wire breakage Thermocut system for annealing the wire for perfect threading Travel (X/Y/Z): 350 x 250 x 250 mm Travel (U/V): +/- 45 mm Max. Taper: +/-25° at 80 mm height Max. Workpiece dimensions: 900 x 680 x 250 mm Cjhnxto83M Max. Workpiece weight: 400 kg Table dimensions: 700 x 480 mm available wire diameters: 0.15 / 0.20 / 0.25 / 0.30 mm Best achievable surface: Ra 0.25 µm Dialogue-guided control for easy set-up of the eroding process Machine dimensions: 2500 x 2500 x 2200 mm Machine weight: 3000 kg The machine is cleaned, serviced and tested by us after receipt of order We are happy to offer you optional commissioning and training

Condition: excellent (used), Year of construction: 2016, Functionality: fully functional, GF AgieCharmilles Drill 20 Year of construction 2016 Travel paths (X/Y/Z): 300 x 200 x 300 mm Support surface: 400 x 300 mm Maximum drilling depth: 200 mm Electrode diameter: 0.1 to 3 mm Maximum workpiece weight: 300 kg Generator output: 30 amps Dielectric volume: 16 liters Machine dimensions: 1340 x 910 x 1940 mm Total weight of the machine: 870 kg The start hole erosion machine is cleaned, serviced and tested by us before delivery. Cfwchr89Lg We are also happy to offer transportation, commissioning and training.

Condition: refurbished (used), Year of construction: 2015, Functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 300 mm, workpiece weight (max.): 500 kg, total height: 2,398 mm, total width: 1,690 mm, total length: 1,900 mm, quill stroke: 300 mm, workpiece length (max.): 790 mm, workpiece width (max.): 530 mm, workpiece height (max.): 275 mm, overall weight: 2,800 kg, tank capacity: 410 l, GF Machining Solutions FORM 200 mS Year of manufacture 2015 Die-sinking EDM machine in C-design Fixed table with lowerable container Travels (X/Y/Z): 350 x 250 x 300 mm Maximum workpiece dimensions: 790 x 530 x 275 mm Maximum workpiece weight: 500 kg Programmable bath height: 100-325 mm Incl. pneumatic chuck Erowa ITS 50 or 3R Systems (optional) Max. Electrode weight: 50 kg Max. Inertia: 2000 kgcm² 32-fold electrode changer AC FORM HMI user interface Operation via 15" LCD color display with touchscreen Keyboard and manual control unit also available Machine dimensions: 1900 x 1690 x 2398 mm Total weight: 2800 kg The machine is cleaned and serviced by us after receipt of the order. This is followed by an erosion test. We will be happy to commission the machine on your premises and provide operating instructions. Cfqpnqp7Pg Optional: - Transportation - Cooling unit - Dielectric - Clamping device