Dust test chamber dust chamber

Testzentrum Baden Primus Engineering DST350

Primus Engineering
Lhjdpfxszgbtis Am Tsh
Type: DST 350
This testing equipment was designed for performing IP protection class tests for "dust" according to, for example, DIN 40050 Part 9 and DIN EN 60529.
The testing equipment is intended for testing technical components under the influence of dust and negative pressure within the limits specified in the technical data.
Operation / HMI
Control panel with screen and buttons
Manual controls
Predefined test sequences
Integrated vacuum circuit with flow measurement
Technical data:
Total electrical power: Max. 5 kW
Connection voltage: 400V/50Hz 3-N/PE (16A CEE socket)
Dimensions: Width approx. 920 mm, Depth approx. 710 mm, Height approx. 1,770 mm
Dimensions of test chamber: Width approx. 700 mm, Depth approx. 650 mm, Height approx. 770 mm
Volume approx. 350 l
Weight: approx. 200 kg
Vacuum: 0 to -100 mbar
Suction air flow: 0 to approx. 5 l/min
Operating climate range: Temperature: +12 °C to +30 °C
Humidity: 25 % rel. to 75 % rel., non-condensing

Protection class tests according to DIN 40050 Part 9 and DIN EN 60529 (VDE 0470 Part 1)
Dust test:
Dust-protected IP5X and IP5KX
Dust-tight IP6X and IP6KX
with and without vacuum
Condition: used
Scope of delivery: (See image)
(Changes and errors in the technical data and specifications are subject to change!)
We will be happy to answer any further questions you may have by phone.

The listing was translated automatically. Translation errors are possible.