Complete painting plant

SORBINI /VIET 800

Condition: used, Year of construction: 1994, SECOND-HAND 5 SPINDLES MOULDER WEINIG MOD. PROFIMAT 23 - Working width 230 mm - Working height 120 mm. Lrsdpsrm Rxwsfx Ab Esi Composition : - horizontal bottom - vertical right - vertical left - horizontal top - horizontal bottom Year 1994 V 380/50

Year of construction: 1990, condition: reconditioned (used), 4-sided planer unimat U23, 7 heads Ljdpfxjpqxnxe Ab Esri 4-sided Weinig 7-head planer, 7 universal arrangement: horizontal, lower vertical, right, left, vertical, right, vertical, upper horizontal, lower horizontal, and the last universal. The drive is realized by means of cardans. The drive is secured with Rotax clutches. Pressure of the element using pneumatics. Feed smoothly regulated by an inverter. Machine feed 0-42 m/min. 2.5 kW and 7.5 kW engines. Grinding table and a new one. Additionally, new wiring and new electrics. The machine has been completely renovated. Warranty .

Condition: ready for operation (used), Year of construction: 2002, For sale used Rilesa Unix drilling machine - 4 drilling units top Lrjdpfx Abeu Shx Dj Eji - 4 drilling units rear - Right and left

Year of construction: 2007, condition: excellent (used), functionality: fully functional, Electromagnetic belt separator IFE MEL 1400 length: 3200mm width: 1200mm Year of manufacture: 2007 Ledspcf Etspfx Ab Esri Protection class of magnetic housing IP65; Magnet power 7.55 kW; Material flow rate 1.8 m/s; Drive power 4 kW; Control voltage 230 V; Operating voltage 3x400 V; Frequency 50 Hz; cylinder diameter: 500mm Total weight: 6480 kg Adjusting the device belt and tension

Condition: new, Year of construction: 2025, CNC-controlled drilling, gluing, and dowel insertion machine Complete in standard configuration with: - Support with linear guide consisting of: 1 pc. single-spindle horizontal drilling unit, motor 0.65 kW, stroke 70 mm Tool speed selectable via operator software (3000/5000/8000 rpm) 1 pc. blow-out, gluing, and dowel insertion station for dowels Ø 8 mm, dowel length 25–50 mm - Fully automatic, electronically controlled central lubrication - X-axis NC controlled, with working length 700 mm, max. traversing speed 95 m/min - Z-axis manually adjustable via mechanical digital counter, position on support table 5–40 mm - Dowel insertion projection adjustable from 7–20 mm via mechanical digital counter, drilling depth 0–35 mm (with drill length TL 70 mm), automatically set with insertion projection - Closed glue system with 6 bar glue pressure via glue nozzle, for glues with viscosity from 150 to 350 mPas - Glue quantity steplessly adjustable via operator software - Selector switch GLUE/WATER to flush glue system, each with: 1 stainless steel container for 7.5 kg glue and 7.5 l water - Indicator lamp for residual glue level in glue container - 1 pc. left side stop, 1 pc. right side stop (all removable) - 2 pcs. start buttons for individual operation with 1–2 workpieces - 2 pcs. pneumatic angled clamping cylinders 10° for workpiece thickness up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. extraction funnel, connection Ø 80 mm - 1 pc. TCT controller with: Lrsdpfow Sgm Hox Ab Eoi Integrated industrial PC, incl. Beckhoff TwinCAT soft PLC, operating temperature range 0–50°C, 15" capacitive touchscreen TFT industrial display, operating system: WINDOWS 10 IoT LTSC (long term support channel) - Programming via menu-guided user software, drilling distances freely programmable with ABSOLUTE, RELATIVE, or GRID dimensioning, automatic workpiece mirroring and process optimization, 2 working fields assignable with different programs, graphical workpiece display, parametric programming, zero-point shift, programmable work lists, plain text error diagnosis - Integrated options: - Electronic optical glue monitoring system G.I.C. (Glue Insert Control) for 1 pc. glue nozzle, art. no. 0470-0810 - 1 EASY CLEAN system, for automatic test glue shots before starting the drilling/gluing/dowel insertion program. E.C.S. for 1 pc. glue nozzle, art. no. 0471-Z010 - 1 single-spindle vertical drilling unit from ABOVE, 0.65 kW, (3000/5000/8000 rpm), position (Y) manually adjusted via mechanical digital counter Adjustable from 5–40 mm, drilling depth (Z) max. 30 mm (with drill length TL 57 mm) Workpiece thickness (Z) max. 50 mm, workpiece length (Y) min. 130 mm (incl. drilling depth compensation, e.g., for Häfele Minifix) Art. No. 0471-0830 - 4 vertical angled clamping cylinders 10° with mount, additional, Art. no. 0470-0850 Available: short notice

Condition: excellent (used), PAOLONI SAC RD 230 15/24 four-sided srtug machine Technical data: Max planing width: 230 mm Max planing height: 120 mm Diameter of the spindles: 40 mm Number of spindles: 4 Order of spindles: bottom right left top Lredpfx Aouy H Nweb Eji Number of top steel pulling rollers: 2 Number of top rubber pulling rollers: 1 Number of smooth rollers in countertop: 1 Extraction spigot diameter: 3 x 120 mm Working table lubrication pump Manual lifting of the body Power supply: 400 V Total power: 21 kw Overall dimensions: Length: 3280 mm Width: 1290 mm Height: 1500 mm

Condition: good (used), Year of construction: 1982, functionality: fully functional, Power 380V 3.3A Motor power 1.1kW 2800 rpm Automatic pneumatic control with control panel Drill head with 23 spindles, pitch 32 mm Drill hole depth adjustable Lodpfx Ajq Auwtsb Eori drill shaft 10 mm position adjustment 5-60 mm Clamping height 80 mm Passage width 800 mm Dimensions: 1200 x 900 mm Weight approx. 400 kg 1x setting gauge row bore 1x setting gauge side stop 1x stop ruler 1500 mm 1x fence 2000 mm

Condition: used, Year of construction: 2000, Used machine MAKA CNC Door Processing Center HC 55 TBZ Year of manufacture: 2000 CNC machining center for processing interior doors (hardware mortising, vision panel cut-outs, peephole machining, etc.) CNC control BWO 900C, with 1 MB memory, integrated PC. Working ranges: For door width: 250 – 1,280 mm For door height: max. 2,500 mm For door leaf thickness: max. 80 mm Rapid traverse speed: X / Y-axis: 45 m/min Z-axis: 10 m/min 1 universal milling unit SK40 With integrated A-axis swivel 190° (+/- 95°), along X-axis for lock/hinge machining on both sides along the longitudinal door edge directly with the unit. Water-cooled milling spindle, nominal output 8 kW, available from 7,000 rpm, continuously variable speed from 1,000 – 17,100 rpm, SK40 tool holder for automatic tool change. 1 chain-type tool magazine with 24 positions, for tools up to Ø 90 mm, for sorted storage up to max. Ø 160 mm, positioned at unit’s service position. Max. tool length 200 mm from spindle mount. Milling spindle and 2 x magazine positions equipped for angle/feeler heads with torque support. Machine table with width adjustment via program, as well as width measurement for edge processing for consistent milling depth on both sides. 1 set of infeed rollers for manual loading, automatically elevating and lowering. 1 longitudinal stop with pneumatic insertion stroke, mounted on the traversing unit for positioning according to door length and thickness. 4 pneumatic lateral stops, swing-in type, for doors with veneer/cover overhang up to max. 15 mm, with selectable height adjustment for varying stop heights on finished doors (single/double rebate doors). 2 vacuum clamping lines, 5 vacuum suction cups per line, 130/200 x 70 mm, with touch valve and blow-off device. Per line, 3 vacuum cups can be lowered according to the door height being processed. Lrjdpsv S Dn Dsfx Ab Eji 1 vacuum pump, approx. 128 m³/h suction capacity, with 250-liter intermediate tank, enabling rapid vacuum build-up. Automatic central lubrication, free-standing control cabinet with air conditioner. Safety features: Bumper on both sides of the gantry, protective fencing on the sides. Various tools and tool holders can be taken over by agreement. The machine can be inspected in Hermaringen.

Condition: used, Year of construction: 2017, functionality: fully functional, feed length X-axis: 1,200 mm, feed length Y-axis: 800 mm, feed length Z-axis: 45 mm, drilling depth: 45 mm, type of input current: three-phase, compressed air connection: 7 bar, input voltage: 400 V, workpiece height (max.): 45 mm, operating pressure: 7 bar, input frequency: 50 Hz, input current: 10 A, The KOCH SPRINT-PTP Basic is a high-precision CNC point-to-point drilling and dowel insertion machine designed for efficient production in furniture and cabinet manufacturing. Built in 2017 by the renowned German manufacturer KOCH Maschinenfabrik, this machine ensures reliable and accurate drilling, gluing, and dowel insertion operations. It is ideal for small to medium-sized woodworking companies looking to automate and increase productivity in carcass and panel production. The machine features a horizontal drilling unit with dowel vibration system, glue injector, and four horizontal clamps with central zero positioning for precise workpiece alignment. The mechanical Z-axis readout allows accurate depth control. Equipped with a 15” screen and Windows (7) -based control system, the machine offers user-friendly operation and easy programming. Technical Data Working range X-axis: 20 – 1200 mm Working range Y-axis: 110 – 800 mm Working range Z-axis: 14 – 45 mm Power: 5 kW Voltage: 400 V Frequency: 50 Hz Max. current: 10 A Lrsdpfx Abeylhkao Eji Compressed air requirement: max. 7 bar Year of manufacture: 2017 The machine is in good working condition.