Heating

Schmid UTSK 550

Condition: used, machine/vehicle number: 005108, Position 1: Front-Loading Panel Saws HOLZMA-HPP 380/43/43 + TLF Position 2: Horizontal Storage Systems HOLZMA-HPP 380/43/43 + TLF Gsdpfx Agjwuck Iolokd

Condition: good (used), Year of construction: 2002, operating hours: 123 h, functionality: unexamined, heating capacity: 350 kW (475.87 HP), Mawera Type FU350RIA, fully automatic wood-fired boiler, bottom-feed firing, output: 350 kW. Hot water system, maximum flow temperature 95°C. Year of manufacture: 2002. Parts: boiler body: combustion chamber and heat exchanger, automatic feed screw, multi-cyclone, flue gas fan with piping to the chimney, operating instructions, Logic control system. Already disassembled. Viewing: possible by appointment in Budapest. Gsdowa Ax Ajpfx Agljkd

Year of construction: 2020, condition: excellent (used), hopper with an integrated conveyor belt, featuring a metering screw at the front. Length: 9 meters, width: 2 meters. Gkedpfx Agsilqfqeljd

Year of construction: 2002, condition: ready for operation (used), Clamping force: 2500kN, clear tie bar distance: 630mm/630mm, opening stroke: 1150mm, min. mold installation height: 330mm, screw diameter: 60mm, specific injection pressure: 2000bar, max. stroke volume: 670cm³, connected load: 74kW, control: MC4. Machine dimensions: 5700mm/2200mm/2300mm, machine weight: 12.5t, operating hours: 47,572h. Available from February 2025, including special accessories, Krauss Maffei LRX-S 100, 8x hot runner control points, 4x core pull, blow-out unit, pressure accumulator, hydraulic tie-bar pulling device, energy-saving circuit, ALS interface, 20mA interface and color dosing device interface. On-site inspection is possible, documentation available. Gkodpfxeuiykde Aglsd

Condition: new, Year of construction: 2025, Genie GS4046 NEXT GENERATION E-Drive scissor lift, new, used, demonstration units available Gkjdpfxerqfdrj Aglsd

Condition: used, Year of construction: 2010, functionality: fully functional, Max. working temperature 90° C. Max. working pressure: 2 kg/cm². Power 3.000.000 kcal Fuel: wood waste The MTN boiler is a hot water generator that uses sawdust as fuel, with "AUTOFOCO" type burner loading. The boiler is of horizontal type Tubular plates and shell are made of thick carbon steel sheet. The core is covered with refractory cement with a high percentage of alumina. Gsdetywzqspfx Aglekd At the rear there is a cast iron grate for burning solid pieces of wood, calculated for an output equal to 60% of the rated output of the boiler. The tube bundles are made of carbon steel. The base incorporating the hearth is of large dimensions, to allow the burner to be mounted with a plug. The boiler is supplied with an air distribution manifold. The boiler body is insulated with mineral wool and covered with cast iron Accessories: - 1 Adjustable thermostat - 1 safety thermostat - 1 safety thermostat with manual start - 1 thermometer - 1 hydrometer - 1 combustion control device - 1 thermostatically actuated valve positioned in the flue tube MANUAL FEED GRILL is a fixed grill made of special nodular cast iron bars, fixed in refractory material, easily interchangeable. 1 Complete electrical components, motor protections, contactors. 1 Complete set of wiring accessories 1 General circuit breaker 1 Power supply for auxiliary circuits 1 Circuit diagram 1 Pressure gauge 2 Temperature probes 1 Dust suction system consisting of a fan with belt transmission, with decanter cyclone, boiler-cyclone connections, cyclone-fan, fan-fan, fan-smoke stack, in painted carbon steel. 1 Chimney

Condition: used, Year of construction: 1995, De Dietrich Industrial Boiler – Type GT 517 Gksdpfx Asyntqwogljd Manufacturer: De Dietrich (France) Model: GT 517 Year of manufacture: 1995 Technical data (from nameplate): Water capacity: 789 liters Heat output (Germany): 775–820 kW Oil/Gas input range: 845–900 kW Heat flow: 761–978 kW Maximum operating temperature: 120°C Maximum working pressure: 6 bar Voltage: 230V / 50 Hz Electrical power: 100 / 200 W Heat exchange surface: 28.46 m² Made in France Burner: Weishaupt gas burner Control: York International control panel (Gas burner 1) Condition / sale terms: Used unit, offered as-is, as seen

Condition: used, machine/vehicle number: 008431, X axis working area: 6360 mm Gsdpeym Rphofx Aglskd Y axis working area: 1905 mm Working Table: Pod and Rail Number of controlled axes: 5 axes Total number of drilling spindles: 10 Total number of tool changer positions: 60

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, nominal power (apparent): 3,000 kVA, Industrial hot water boiler 3,000,000 kcal/h. Rated power: 3,000 kcal, approximately 3.4 MW. Gedpfjt Ngfiox Aglekd

Condition: used, Weiss tensioning car with auxiliary car with rails fully hydraulic Gsdpfxohwzrks Agljkd track gauge: 90cm immediately available location: Austria, near St. Pölten