Atlas Copco GA30FF screw compressor

Atlas Copco ga30ff

Condition: not inspected (used), Year of construction: 2014, operating hours: 43,965 h, functionality: fully functional, power: 30 kW (40.79 HP), volume flow: 351 m³/h, pressure (max.): 13 bar, type of cooling: air, Equipment: refrigerant dryer, type plate available, Used Atlas Copco GA30VSD+FF compressor Integrated dryer Integrated frequency converter 30 kW Chedpoxu Ibcefx Aa Toc 13 bar 5.85 m³/min Year of manufacture: 2014 Operating hours: 43965

Condition: new, Year of construction: 2025, functionality: fully functional, total width: 6,400 mm, total length: 7,800 mm, total height: 2,500 mm, overall weight: 30,000 kg, New machine Machine for punching, embossing, waste stripping and depaneling Specification: Sheet format max. 830 x 1,150 mm Sheet size min. 450 x 550 mm Maximum punching force 3.0 MN (300t) Speed 7,000 Bg/h Processable materials: Paper min. 80 g/m² Cardboard up to 2,000 g/m² Corrugated cardboard up to 4 mm Features: manual non-stop feeder Automatic pile alignment at the feeder 10" inch display at the feeder Cjdpfx Ast H Nhhsa Tohc Automatic non-stop roll cloth in the feeder stripping station Blank separating station Centerline Automatic separating sheet inserter to stabilize the panel stacks Quick-clamping frame stripper upper tool and central stripping board Quick-clamping frame blanking station upper and lower tool Pneumatic clamping frame and punching plate lock APC 1 - automatic punching pressure system APC 2 - platen tilting at the platen exit 1x 4mm cutting plate incl. 10x 1mm cutting plates 2x 5mm cutting plate 1x Quicklock clamping frame 2x clamping frame without Quicklock QTM fine adjustment of cutting plate Sheet monitoring in each station with 2 sensors Incl. platform 1 tool set (Bobst system) Delivery time: 6-8 months

Condition: used, Year of construction: 2003, functionality: unexamined, machine/vehicle number: AII 298286, overall weight: 585 kg, Speed-controlled screw compressor, Atlas Copco GA 30 VSD FF, with integrated refrigeration dryer, year of manufacture 2003. Chedjz A Un Aopfx Aa Tec Serial No. AII 298286, rated power 30 kW, weight 585 kg. Maximum operating pressure 12.75 bar, maximum delivery rate 75 l/s (4.5 m³/min). Control system: Atlas Copco Elektronikon II. Location: Homburg (Saar), Germany. Inspection by appointment only. Price upon request, net plus VAT, ex works; dismantling and loading by arrangement. All information without guarantee.

Condition: used, Year of construction: 2017, operating hours: 27,159 h, functionality: unexamined, machine/vehicle number: API834431, overall weight: 500 kg, Speed-regulated screw compressor Atlas Copco GA30VSD+ FF with integrated refrigerant dryer, manufactured in 2017. Serial number: API834431, motor power: 30 kW, connection: 400 V, 50 Hz, 3-phase, weight: 500 kg. Maximum operating pressure: 12.75 bar, delivery rate: 5.84 m³/min (97.4 l/s). Operating hours: 27,159 h, motor starts: 254,769, load cycles: 303,011. Control panel with color display, menu navigation in German. Cjdpoz A Udwefx Aa Tshc Location: Homburg (Saar), Germany. Inspection possible by appointment. Price on request, net plus VAT, ex location; dismantling and loading by arrangement. All information without guarantee.

Condition: used, Year of construction: 2006, operating hours: 89,000 h, functionality: fully functional, power: 75 kW (101.97 HP), fuel type: diesel, type of cooling: air, Kaeser CSD 122 SFC screw compressor built-in inverter 2.2-10.5m3/min, 75kW, 8.5bar Manufacturer: Kaeser Type: CSD 122 SFC Year of manufacture: 2006 Chjdpfxjt A Uyue Aa Tec Operating pressure: max 8.5bar Power: 75kW Capacity: 2.2 - 10.5 m3/min Operating hours: 96244 h (Last service: 88854 h) Inclusion dimensions: 1100 x 2200 x 1900 mm Net weight: 1600 kg

Condition: excellent (used), Year of construction: 2014, operating hours: 4,293 h, MANUFACTURER ATLAS COPCO MODEL GA30FF S/N API325798 YEAR 2014 POWER (kW) 30 OUTPUT (m3/min) 5.4 PRESSURE (bar) 7.25 HOURS (DOC/TOTAL) 4293 Codpfxoylwlme Aa Tjhc FREQUENCY INVERTER no INTEGRATED DRYER yes, R134a 0.54kg HEAT EXCHANGER no COOLING (AIR/WATER) air ON RECEIVER TANK no

Condition: like new (used), Year of construction: 2026, power: 286 kW (388.85 HP), fuel type: diesel, rotational speed (min.): 1,900 rpm, Technical Data for Deutz Engine Type BF6M1015C General Specifications Chedpfx Aaoyzaayo Tjc Number of Cylinders: 6 Bore/Stroke: 132 mm / 145 mm Displacement: 11.91 liters Compression Ratio: 16.5 Max. Rated Speed: 2100 rpm Mean Piston Speed: 10.15 m/s Power Ratings for Construction Equipment Engines Group I: Power: 300 kW Speed: 1900 rpm Mean Effective Pressure: 14.4 bar Group III: Power: 273 kW Speed: 1900 rpm Mean Effective Pressure: 13.1 bar Additional Parameters Max. Torque: 1980 Nm At Speed: 1200 rpm Minimum Idle Speed: 550 rpm Weight (to DIN 70020, Part 7A): 850 kg This summarized technical data provides a comprehensive overview of the BF6M1015C engine’s specifications and performance ratings.

Year of construction: 2026, condition: new, functionality: fully functional, machine/vehicle number: 90301143, Foil cutter for hot stamping foil, max. 840 mm, 610 meters. Rewinding optional. Chjdpfxsy D H Sho Aa Tec

Year of construction: 2000, condition: ready for operation (used), Operating pressure: 7.75bar, air volume flow: 40.4l/s, power: 15kW, speed: 3000rpm, machine weight: approx. 450kg. On-site inspection is possible. Codpfx Aaswfg Hho Tehc

Year of construction: 1984, condition: good (used), BOBST I 130 ER Automatic Die-Cutting Machine Year of manufacture: 1984 2. Sheet Formats Maximum sheet size: 920 x 1,300 mm Minimum sheet size: 450 x 580 mm Working format: – Max. 890 x 1,270 mm (open chase) – Max. 900 x 1,300 mm (closed chase) 3. Material Specifications Maximum board thickness: 1.5 mm (cardboard) Chedpsycv Dvjfx Aa Tsc Minimum grammage: 90 g/m² Gripper margin: 10 mm 4. Chase Sizes – 915 x 1,300 mm chase without bar – 840 x 1,300 mm chase with bar 5. Pile Heights (Non-Stop Operation) Feeder pile height: Max. 1,500 mm with pallet Delivery pile height: Max. 1,400 mm with pallet Maximum pallet size: 900 x 1,300 mm 6. Equipment and Features – Suitable for carton and paper processing – Not suitable for corrugated board – Stripping possible using stripping frame and separation grid – EMS side lay system for alignment according to printed marks