FGT Graphic Machinery - Die Cutting

Bobst 130 I ER

Condition: new, Year of construction: 2025, functionality: fully functional, total width: 6,400 mm, total length: 7,800 mm, total height: 2,500 mm, overall weight: 30,000 kg, New machine Machine for punching, embossing, waste stripping and depaneling Specification: Sheet format max. 830 x 1,150 mm Sheet size min. 450 x 550 mm Maximum punching force 3.0 MN (300t) Speed 7,000 Bg/h Processable materials: Paper min. 80 g/m² Cardboard up to 2,000 g/m² Corrugated cardboard up to 4 mm Features: manual non-stop feeder Automatic pile alignment at the feeder 10" inch display at the feeder Automatic non-stop roll cloth in the feeder stripping station Blank separating station Centerline Automatic separating sheet inserter to stabilize the panel stacks Quick-clamping frame stripper upper tool and central stripping board Quick-clamping frame blanking station upper and lower tool Pneumatic clamping frame and punching plate lock APC 1 - automatic punching pressure system APC 2 - platen tilting at the platen exit 1x 4mm cutting plate incl. 10x 1mm cutting plates 2x 5mm cutting plate 1x Quicklock clamping frame 2x clamping frame without Quicklock QTM fine adjustment of cutting plate Sheet monitoring in each station with 2 sensors Incl. platform Iodpfx Adet H Nhhe Neih 1 tool set (Bobst system) Delivery time: 6-8 months

Condition: used, Year of construction: 2023, functionality: fully functional, OMEGA ALLPRO 90 (2023 model) - FOLDERF-GLUER - Microbox device - Servo motors on the feeder and stacker - Remote control - Left and right-hand side-register sections - Retractable center carrier in the final folding section - Third carrier in PF1 and PF2 - Camera at the feeder to monitor the delivery section entry - Motorized carriers with positioning readout - Electronic servo system for 4- and 6-corner boxes Iisdszlqzgopfx Ad Njh - Pneumatic aligner for micro-flute crash-lock bottom boxes - eWON Flexy for OPC UA data sharing - Air-assisted folding system for crash-lock bottoms - Safety pull-cords - ERO cold glue system (3 guns + side glue wheel with reservoir)

Condition: excellent (used), - 30kW engine - built-in dryer Iisdpfx Ajwlcq Nsd Neh - Max. working pressure 7.5 bar

Year of construction: 2026, condition: new, functionality: fully functional, machine/vehicle number: 90301143, Foil cutter for hot stamping foil, max. 840 mm, 610 meters. Rewinding optional. Iijdpfxsy D H She Ad Neh

Condition: used, Year of construction: 1971, The Heidelberg GTP is a high-performance hot foil stamping press, currently operational in a printshop in Germany. Designed for precision and versatility, this machine handles a wide range of applications, from luxury packaging to security printing. With a maximum sheet size of 340 x 460 mm and a minimum of 85 x 102 mm, the GTP accommodates diverse project requirements. It operates at speeds between 1,500 and 4,000 sheets per hour, delivering both efficiency and flexibility. The press features a punching pressure of 60 tons, ensuring crisp, high-quality foil application on various substrates. Weighing approximately 2,250 kg and with compact dimensions of 2.08 x 1.48 x 2.10 meters, the GTP is built for stability and ease of integration into existing workflows. The machine comes complete with all necessary tools, accessories, and a sturdy frame, making it a turnkey solution for any finishing department. Format: 340 x 460 mm Equipment: Hot Foil Stamping Tiegel Heidelberg GTP Size min. 85 x 102mm Size max. 340 x 460mm Speed min. min. 1.500sph - max. 4.000sph Punching pressure 60T Weight approx. 2250kg Iedszwf Ufspfx Ad Neih Dimensions 2,08 x 1,48 x 2,10m Complete with tools and accessories include frame

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 6,334 mm, total width: 4,390 mm, total height: 2,465 mm, overall weight: 30,000 kg, New machine Machine for punching, embossing, waste stripping Technical data: Sheet format max. 830 x 1,150 mm Sheet format min. 450 x 550 mm Maximum punching force 3.0 MN (300t) Speed 7,000 Bg/h Materials that can be processed: Paper min. 80 g/m² Cardboard up to 2,000 g/m² Corrugated cardboard up to 4 mm Features: Automatic non-stop roll cloth in the delivery Stripping station Centerline Quick-clamping frame stripper upper tool and central stripping board Pneumatic clamping frame and punching plate lock APC 1 - automatic punching pressure system APC 2 - platen tilting at the platen exit 1x 4mm punching plate incl. 10x 1mm punching plates Iisdst H Nc Sspfx Ad Noh 2x 5mm cutting plate 2x clamping frame without Quicklock Incl. platform 1 tool set (Bobst system) Delivery time: 6-8 months

Condition: used, Hot foil embossing press, Heidelberg GTP, year of manufacture 1965 – machine number: GTP 63590N. Working size: max. 340 x 460 mm. Pressing force: 60 tons. Complete with accessories and closing frame. Iedozwdh Depfx Ad Noih If you are interested, we will be happy to provide you with information about other machines in our inventory. You are welcome to inspect the machine at our facility after prior arrangement of an appointment.

Year of construction: 1985, operating hours: 75,240 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 0574 028 07, Largest sheet size: 1420 x 1020 mm Smallest sheet size: 700 x 500 mm Maximum punching force: 600 t Gripper edge: 18 – 22 mm Iiodpfezg D I Nex Ad Njh Maximum number of cycles per hour: 6000 Processable materials: Cardboard 100 – 1000 g/m² Corrugated board F, E, B, C, F/F, F/E, F/B, E/E, E/B - Flatbed die-cutter with waste separation station, intermediate sheet insertion, and pre-stacking device, working platform, - 1 x preparation table for external tool preparation - 6 x frames for blanking dies - 6 x closing frames for die-cutting tools - 6 x tool carts

Year of construction: 1995, condition: ready for operation (used), functionality: fully functional, Sheet size minimum: 290x400 mm Sheet size maximum: 640x900 mm Sheet thickness maximum: 0.75 mm Hot stamping size maximum: 620x840 mm Sheet edge free of print stamping (gripper edge): 8-10 mm Number of heating zones: 4 Cylinder diameter: 540 mm Backing thickness: 1.5 mm Height of the feed pile and pre-pile: 340 mm Height of the delivery pile: 510 mm Vertically adjustable hot stamping bed: -2...+0.4 mm Iijdpfxszatf Ee Ad Nsh Width of the stamping foil rolls (max): 840 mm Distance between the stamping foil rolls (min): 3.0 or 1.0 Outside diameter of the stamping foil rolls (max): 140 mm Foil pull rollers and programs (max): 4 Short pulls per program and cycle, number 1...99, length: 0...999 mm Intermediate pull per program and cycle, number as required: 0...999 mm Long pull per program and cycle, number 1, length: 0...999 mm Hot stamping die height: 7 mm Different hot stamping die height also available if required: 6.35 mm Machine speed: 600-4000 Hot stamping speed, max: 600-3000 Connected electrical load ratings (3-phase) for drive: 10.8 kW Connected electrical load ratings for heating and foil pull: 17.0 kW Voltage: 3x400V, 50Hz Overall dimensions: Length of the machine: 4000 mm Width of the machine: 2540 mm Height of the machine: 1950 mm Support area of the base frame: 2.1 m² Work area: 5650 mm Length: 5650 mm Width: 3650 mm Total weight: 7500 kg.

Condition: used, 2025 generalüberholt Buchdruckzylinder / 2025 complete overhauld Letter Press Cylinder DIE Cutter Heidelberg SBB Buchdruckzylinder / Letter Press Cylinder DIE Cutter Heidelberg SBB Iiodpfxozzyprj Ad Noh >>2025 generalüberholt / 2025 complete overhauld