Drum dryer

RECALOR

Year of construction: 2002, condition: good (used), functionality: fully functional, Drum dryer for wood sawdust and chips with capacity up to 15t/h. Condition - fully functional. Dksdpfxevx S Hnj Apden

Condition: like new (used), functionality: fully functional, Year of construction: 2025, operating hours: 55 h, Machine with special rotor available immediately Advantages: + special rotor with reduced blade overhang, suitable for hard and soft materials + 22 kW motor + effective square blades *for pallets: up to a maximum of 10 pallets per hour *dependent on screen size and material. With smaller wood residues, significantly more. Motor: 22 kW; 400 V - 50 Hz - 3 phase, Screen: 15/20 mm or as agreed (10 to 40 mm possible) hydraulically operated slide Screen opening currently (15/20 mm) *can be exchanged Extraction nozzle Ø 200 mm. Feed opening 1000x1000 mm Dimensions: 2000x1800x1645mm Example image above: color of the system may vary Weight: 1920 kg. Included as standard: - Control cabinet with PLC control - automatic star/delta start - fast hydraulics - auto. OFF when the rotor is idle - speed 70-90 rpm for high throughput - cycle control to avoid idle times - performance-enhancing step control of the hydraulic slide - Pertinax guides for hydraulic slide - vibration-damping machine feet - CE compliant The following options are available at an extra cost: Dkodjx Af Rdopfx Apdon - Raise shredder by 30 cm (preparation for conveyor belt) + €2,480 net - Inclined conveyor belt (discharge height approx. 220 cm) + €12,980 net - Overband magnet + €6,980 net - Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with the shredder) - extended feed hopper 1500x1500 mm + €3,480 net Requirements for the raw material: - The moisture content (as received) must be below 25% - The feed must be free of metals and mineral contaminants. Damage to the tools and/or increased wear may result.

Condition: used, Year of construction: 2019, MAXIMUM CHIPPER DIAMETER: 250 MM ENGINE POWER: 75 kW GRINDING DRUM WIDTH: 640 MM GRINDING ROLLER DIAMETER: 660 MM UPPER ROLLER WIDTH: 640 MM Dksdpfx Apeyffi Tsden MAXIMUM OPENING OF UPPER ROLLER: 600 MM KNIVES ON MACHINE: 3 FEED ROLLERS: 2

Condition: used, Iseli BS 5 sharpening machine Dodpjwgh H Ejfx Apdskn Iseli EBW leveling machine

Condition: excellent (used), Year of construction: 2007, Wood Cheaper for sale ! Manufacturer - BRUKS KLOCKNER Model - BK -DH 700X100 L Power - 2x500 kw el. motors Entry - 700x100 mm Number of knives - 6 Weight - 46 tons Equipment consits : - Input transporter 10 m Dkodpfxjyzfigs Apden - Metal detector - Cheaper - Output transporter - El. Cabinet - Comand pult

Condition: used, Year of construction: 1996, functionality: fully functional, overall weight: 24,000 kg, rotor diameter: 620 mm, number of blades: 30, total length: 6,300 mm, total height: 2,430 mm, total width: 4,700 mm, rotor width: 2,491 mm, power: 200 kW (271.92 HP), type of input current: three-phase, rotational speed (min.): 150 rpm, filling opening width: 2,495 mm, filling opening length: 3,190 mm, input voltage: 380 V, Vecoplan VAZ 300/250 UNF Dksdjxlm Trepfx Apdsn This machine is still in operation and will be available on October 20th. For more information, please contact us.

Year of construction: 2018, operating hours: 35,000 h, condition: used, functionality: fully functional, Description of fully automated dryer Major overhauling made by mid 2025 • The housing of the dryer is welded steel construction. The internal floor is made of perfored sheet board. The dryer has an external casing (walls and ceiling) in sandwich panel. • The dryer is driven by hydraulic power pack. • The dryer is equipped with “Ziehl Abegg”, MAXvent axial fans. It's propeller blades are made out of light casted material. One of the most energy efficient product on the market. Hot air generator is equipped with two “Geo Coil’’ heat exchangers. (fully functional but has bent fins) • The control system is equipped with a touch display for operation and visualization of the Dryer. Remote control via PC possible. Incl. web server on the panel for the visualization of drying processes via Ethernet interface. • Working mode according to air exit temperature. The rotational speed of the fans automatically adjusted by the frequency converters so that a desired air temperature level is maintained. Includes pressure measuring devices and extension of control system. • Dryer’s heat carrier temperature approx. 85°C flow temperature and approx. 65°C return temperature. Heat carrier flow defined as 176m³/h • Drying air ventilators equipped with frequency converters • Moisture sensors at the outlet of the dryer: YES • Adjustable height of drying bed: YES • Enlarged fuel receiving bin: Yes Dkedpfx Aexc Eitopden General specifications • Infeed material: Wood chips • Size of material: G100 • Water content infeed material max. 45% • Water content outfeed material 7-10% • Designed capacity outlet approx. 1.600 kg/h • Density (wet): 300 kg/m³ • Designed drying surface approx.: 97 m² • Designed climate conditions on site: Ambient temperature 0°C; relative humidity 70%, air pressure: 990 mbar • Noise pressure level, 75 dB, (1 m distance from air inlet port) Dryer fans, installed power: 74 kW Dryer hydraulic powerpack: 15 kW

Year of construction: 2008, condition: excellent (used), Sorting system for small-diameter wood and stakes for RH milling machines or other purposes. Consisting of: Inclined feed with retaining hooks. Disc sorting / cascade system with 3 separation steps. Wood length from 0.3 m to 5.5 m. Wood diameter up to approx. 12 cm. Ready for demonstration. Djdpfx Aswqdc Rjpdekn

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, power: 75 kW (101.97 HP), COMPLETE WASTE WOOD DISPOSAL LINE RUDNICK & ENNERS – Year of manufacture 2011 For sale is a complete waste wood disposal plant by Rudnick & Enners, built in 2011. The line consists of 20 components and was used for the automatic removal, sorting, and processing of edgings, wood chips, and residual wood in a sawmill. The system has a modular design, is dismantled, in very good condition, and available immediately. Technical Overview – Positions 1 to 20 01 – Crooked chain conveyor from reducer, W 600 mm 02 – Vibrating chute 1-edging line, L 13.0 m, W 650 mm 03 – Vibrating chute 2-edging line, L 15.0 m, W 650 mm 04 – Vibrating chute frame saw line, L 8.50 m, W 500 mm 05 – Vibrating chute 1-frame saw line, L 10.0 m, W 500 mm 06 – Vibrating chute 2-frame saw line, L 9.0 m, W 500 mm 07 – Vibrating chute frame saw roller conveyor, L 7.50 m, W 500 mm 08 – Vibrating chute trimming line, L 11.0 m, W 650 mm 09 – Vibrating chute trimming line, L 9.0 m, W 650 mm 10 – Screw conveyor for sawdust, L 4.0 m, Dia. 300 mm 11 – Conveyor belt to chipper, L 3.60 m, W 500 mm Dodpfoy Hbwwjx Apdokn 12 – Slab conveyor belt, L 11.0 m, W 300 mm 13 – Waste conveyor belt, L 11.60 m, W 300 mm 14 – Metal detector 15 – Chipper type RE-TH 250/700/5, Motor 75 kW 16 – Double screw under chipper, W 600 mm 17 – Crooked chain conveyor to screen, W 600 mm 18 – R&E screen, L 4.0 m, W 2.0 m 19 – Crooked chain conveyor to landfill, W 500 mm / W 300 mm 20 – Crooked chain conveyor to wood chip storage, W 600 mm Additional Information Manufacturer: Rudnick & Enners Year of manufacture: 2011 Condition: very good, used and dismantled Availability: immediately ex stock Location: A-3525 Lugendorf, Austria Application: Sawmills, biomass plants, wood processing

Condition: ready for operation (used), Ausgangstext 1.168 / 5.000 Dkodpehupizsfx Apdon Übersetzungsergebnisse Plate magnet, lifting magnet, overbelt magnet, police magnet, magnetic filter, magnetic separator we always have different magnet materials and models and sizes in stock. Available standard sizes: 420x420x200mm 420x420x250mm 620x420x200mm 620x520x200mm 820x520x200mm 820x520x250mm 1000x500x180mm 1200x500x180mm 1200x500x200mm 1200x500x250mm 1500x500x180mm 1500x500x200mm 1500x500x250mm 2000x500x180mm 2000x500x200mm 2000x500x250mm All information without guarantee, only while stocks last! Conveyor belt, conveyor belt system, discharge belts, belt conveyor, magnetic separator, overbelt magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnet, magnetic belt separator Our core competence lies in supplying the customer with exactly what he really needs. Together with our customers, we work out customer-specific, individual solutions and supply corresponding systems from our own production. Feel free to contact us by phone to find a suitable solution for your application. Installation above all conveyor systems possible...