Hammer mill

Pallmann PHM 6-6

Year of construction: 2023, condition: ready for operation (used), Two Vecoplan scraper chain conveyors are available. 1) VKU 800, year of construction: 2023, drive power: 5.5kW, belt speed: 24m/min, conveying capacity: approx. 120m³/h, belt width: 820mm, max. incline: 70°, section length: 10.2m. 2) VKU 1100, year of construction: 2023, drive power: 11kW, belt speed: 24m/min, conveying capacity: 180m³/h, belt width: 1150mm, max. incline: 70°, section length: 22mm. Documentation available. On-site inspection is possible. Godpfx Ajt Iw Ryofzjbk

Condition: used, SPE Renergi Low Temperature Dryer. The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels. The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C. Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur. Power supply Data: • Voltage 400 V AC, three phase • Recommended fuses in supply line: maximum 3x630 A • Typical power consumption: 200kW Gbsdpfxewp Rqfo Afzok The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet). Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h. Airflow: max 200 liter/min Air pressure: min 4,5 bar, recommended 6,0-8,0 bar Water supply: hot water supply, with a flow of 32 dm3/s. Water pressure: min 1.5 bar, max 6.0 bar Operating temperature range: • Incoming air temperature: -20°C to 50°C • Relative humidity: 0% to 60% Raw material/media: • Relative humidity: 45% to 55% by wieght • Requested relative humidity: 8% to 15% in the dried material Capacity: • The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load • The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour. SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of: • The Machinery Directive 2006/42/EC • LVD 2006/95/EC • EMC 2004/108/EC The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time. The dryer is already dismantled All electrical schematics, manual, operating instructions available Upon request, we can provide a contact person with this type of working dryer for consultation Price:20,000.00 EUR (VAT is not included)

Year of construction: 2025, condition: new, machine/vehicle number: 100119-4, Description: - Screening deck system consisting of 1 deck for screening waste wood or wood chips - Input material 0-200 mm - Throughput approx. 80 m³/h (depending on material) - Material separated into 2 fractions: 0-25 mm and oversize - To be mounted on customer-supplied impact walls or subframe Technical Data: - Screening deck 1: Length = 5,200 mm; Width = 1,215 mm - External dimensions: Length = 5,500 mm; Width = 1,850 mm - Screening area 6.3 m², number of shafts: 40 - Drive: 2 x 9.2 kW geared motors Gsdpeg I Uqiofx Afzjbk - Screen body: Polyurethane (star screen), D 166 / 12 fingers - Screening shafts as plug-in system (enables simple and cost-effective adaptation to other grain sizes) - Bearing lubrication routed externally; optional central lubrication available at extra cost Delivery time approx. 16 to 18 weeks

Condition: excellent (used), Year of construction: 2001, overall weight: 16,000 kg, - Building year 2001 - Infeed height 350 / 400mm - Infeed width 1.600mm - Rotor Ø 1.200 mm - motor 180 KW - Weight 16 to Possible drive power 160 - 400 KW Gsdoyzn S Depfx Afzobk Possible throughput up to 60 to/ h, with the right material and motor. Many parts are new as rotor bearings, infeed roller bearings, screen, hammer, anvil, etc. Optional: drive motor, electrical control, infeed shaker.

Condition: excellent (used), Vecoplan VZ 60/34V Wood Chipper For shredding wood and other waste Inlet width: 600 mm Inlet height: 340 mm Number of cutting blades: 28 (new) Cutting blade size: 40 x 40 mm Rotor speed: approx. 450 rpm Chip or shredded product size: approx. 30 mm Capacity: 2 m³/hour Rotor motor power: 11 kW Sifters for chip size determination - 3 pcs. of different cross-sections Electrical panel Gbjdpfxjxmt I Sj Afzek

Condition: ready for operation (used), The object of my auction is a conveyor belt length of 13 m Gbsdopq R D Aepfx Afzok Width of the tape 1.4 m Possibility of transport. Möglichkeit des Transports