Disk grinding & polishing machine

METKON Forcipol 102 (optional Forcimat)

Year of construction: 2023, Condition: as good as new (ex-display), ECOPRESS 102 is an automatic hot mounting press with an electro-hydraulic pressure system and therefore does not require a separate compressed air connection. The working pressure reaches up to 300 bars and an embedding temperature up to max. 200°C. The mounting time can be set up to 60 minutes. The automatic process results in short cycle times: thermostatically controlled heating and cooling times, heating output of 1650 W, automatic cooling cycle. Mounting cylinders and pistons with diameters of 25, 30, 40, 50 mm (and inch) are available. The end of the embedding sequence is signaled acoustically by the device. The delivery is made ready for operation (incl. To be ordered separately Mounting cylinder with piston and intermediate piston for 2 mountings), required power supply: 230V / 50 Hz, 1 phase (220V), water inlet, water outlet, delivery included Test equipment consumables consisting of: • 5 x 1 kg (5 kg) different investment materials Znf9Jlgt • 1650 watt heating power • up to 200 ° C embedding temperature • Embedding time adjustable up to 60 minutes • automatic cooling cycle • no compressed air required • 12 month warranty Delivery by forwarding agent to the factory in Germany (Optional installation by our technicians on site)

Year of construction: 2023, Operating hours: 1 h, Condition: as good as new (ex-display), The METACUT 302 is the best value quality wet cutting machine available on the market for abrasive cuts. The cutting process is purely manual by operating the hand lever on the right side. The type METACUT 302 is able to cut solid materials with a diameter up to 90 / 110 mm (round) or 65 x 130 (square). In order to enable the cutting of extremely long workpieces, a lateral opening was created on the left side of the machine. The machines are equipped with a powerful motor that drives the abrasive cutting wheel safely through the workpiece. The base assembly of the machine consists of large die-cast aluminum housing. The clamping table made of stainless steel is equipped with T-slots, which allows a multitude of different clamping's. The optional quick-clamping devices can be disassembled to allow the installation of conventional clamping tools and thus the clamping of large or irregular workpieces. After only a few cutting attempts, the user is able to make perfect cut-offs with this easy-to-operate wet cut-off grinding machine to create the best conditions for the following grinding and polishing work to be carried out efficiently. Keywords: Manual, abrasive wet cut-off machine, 4.6 kW compact motor, electronic brake system, cutting capacity for solid workpieces with Ø ᐸ 90 mm (110 mm with cut-off wheel Ø 300 mm), for cut-off wheels with a Ø up to 250 / 300 mm, double T-slot table, floor assembly made of solid die-cast aluminum, powder-coated machine body, GRP plastic protective housing, 80 litre circulation cooling system with tank and pump included in the basic price. Delivery ready for operation (options: clamping device, base cabinet) Delivery including a test equipment consumables consisting of: 0K2Cdl * Assortment of 20 cutting discs * 5 litres METCOOL coolant Option: Machine base cabinet

Condition: like new (used), Сompressor technical data: Power, cubic meters 10,2 Max. pressure, atm 10 Power, kW 75 Overall dimensions., Mm 1610x850x1355 Weight, kg 1050 2Twvvm Air dryer technical data: Working pressure, bar 17 Maximum pressure, bar 22 Operating temperature, ° C 36 Power, kW 5,45 The amount of charge, kg 3,97

Condition: excellent (used), Chipper / Shredder NOLTING WFH 102 CATALOG NO. 7032 TECHNICAL DATA - inlet of the loading hopper 1050x610mm - outlet for chipped wood fi 160mm - working width of the rotor 580mm - main engine 18.5 kW - pump motor 0.75 kW - number of knives 14 pcs - knife size 30x30mm - sieve 15mm x 20mm - pressure drawer - electric autoreverse 8Iw2Zkkp90 - dimensions length/width/height 2000x1130x1530mm - weight 970 kg ADVANTAGES – German production – autoreverse – pressure drawer - very good condition – used chipper Net price: PLN 47900 Net price: EUR 10886 Net price converted according to the exchange rate of 4.4 PLN/EUR (with larger exchange rate fluctuations, the price may change)

Condition: good (used), Year of construction: 1993, Operating hours: 212 h, Heidelberg SM 102 VP Year of construction 1993 Rwpk72Aw32 approx. 212 mio Autoplate Alcolor all washing equipment CPC Cptronic

Year of construction: 2023, Condition: as good as new (ex-display), SERVOCUT 302-MA Automatic abrasive cutting machine - programmable with 7" touch screen operating panel with SIEMENS-PLC control - automatic moving table + manual chop cut (other types available) - cutting machine for a variety of different programmable cutting processes Bfdm9Ema - programming of cutting parameters via LCD display - precise and motorized positioning of the sample in X - Y and Z axis - integrated moving table control with force-dependent adjustable infeed speed - variable cutting force, mode for pulse cut, overload protection of the drive motor - compact engine 2,800 rpm cutting disc speed - electronic braking system - cutting capacity up to 110 mm solid material (with cut-off wheels Ø 300 mm) - double, split (left/right) stainless steel T-slot table - floor assembly made of solid die-cast aluminum - incl. 80 l circulation cooling system complete with connection hoses - delivery ready for operation (without clamping devices) - power supply 400 V / 50 Hz, 3 phases with neutral 16 A back-up fuse - delivery including test equipment Consumables consisting of: * Assortment of 20 cutting discs with 300 mm diameter * 5 litre METCOOL coolant liquid

Condition: excellent (used), Year of construction: 2001, CATALOG NO. 7089 TECHNICAL DATA - inlet of the loading hopper 1020x1230mm - working width of the rotor 1020mm - rotor diameter 348mm - main engine 22kW, 400V, 50Hz - pump motor 0.75 kW - number of knives 50 pcs - knife size 35x35x20mm - 12mm sieve - pressure drawer - electric autoreverse - dimensions length/width/height 2000x1130x1530mm - weight 970 kg ADVANTAGES – autoreverse – like WEIMA WL 10 – German production – pressure drawer - very good condition Bbcronyejjn – used chipper, DTR+CE documentation Net price: PLN 122900 Net price: EUR 27932 depending on the price of EUR 4.4 (Prices may change with higher volatility)

Condition: used, Swiveling table milling machine or swivel spindle milling machine Bäuerle SFM/102 for profiling and milling wood with feed device and integral stop. Cxokj3Hj8Y Special price from location until November 30, 2024.

Condition: good (used), Year of construction: 1980, Machine/vehicle number: 8025953, Offer 24417 Technical data: - Max. working width 1020 mm - Max. Material thickness 2 mm - Bending angle lockable with end stop 0 - 135 ° - Upper beam is height-adjustable with lateral hand crank - Max. Max. stroke of upper beam 220 mm - Upper beam can be swung out - Max. adjustment of folding beam 60 mm Cum7Fqijy0 - Bending process is supported by eccentric weight - Manual backgauge - Space requirement approx. W 1750 x H 1120 x D 650 mm - Weight approx. 550 kg - Various bending rails

Condition: ready for operation (used), Center height: 102 mm, Schaublin 102 Turret lathe Dpp7Rz On base with quick clamping Price on request. Please contact me for further information.

Condition: good (used), Total length: 1,030 mm, Total width: 900 mm, Total height: 1,400 mm, Table length: 900 mm, Table width: 720 mm, Power: 1.47 kW (2.00 HP), Rotational speed (min.): 1,500 rpm, Rotational speed (max.): 1,500 rpm, The machine is cleaned and working. Motor 2 HP 380V 1500 rpm B9Ea3Fm7Z3

Year of construction: 2007, Condition: excellent (used), 1 x EVG Mesh Welding plant, Type GE 12/102-PV, year of production 2005, installed in 2006 For production of standard reinforcing mesh with line wire spacing of 100 mm and multiples. Working with line wires off vertical pay-off and pre-straightened and cut-to-length cross wires off a magazine. BASIC DATA: Max welding width: 2600 mm Bzrt2Ycbsi Max cross wire length: 2750 mm Min mesh width: 1200 mm Max. mesh length: 7000 mm Min. mesh length: 1000 mm Line wire diameter off coil: 4 – 8 mm (at 100 mm line wire spacing) 4-10 mm (at 150 mm line wire spacing) Cross wire diameter: 4 – 10 mm pre-straightened and cut Line wire spacing: 100 mm and multiples Cross wire spacing: 50 mm , larger steps infinitely programmable 2 x Invert vertical type drawing ,machine (Cheng I machinery, Taiwan), year of production 2007 Model: IVD-800 (ribbing model) Inlet wire: 10 – 6 mm, low carbon wire Motor: 100 HP, AC motor with inverter (Brand TECO) Dia. Of the drum: 800 mm, made of alloy cast iron, the wire drawing zone (220 mm high) is made of tungsten carbide coating Speed: 0 – 150 m/min. Cooling system: both inside drum and die are water cooling Spooler: with 3 HP AC motor with inverter, coils 0 – 1500 kg 1 x Wafios, fully electronic wire straightening and cutting-off machine, model R 43, year of production, 2007 2 pairs of separate driven feed rolls, frequency regulated, pneumatically open and close. Separate driven rotary body straightener, frequency regulated. Stationary shear, servo motor driven. Change over time: 1 – 3 minutes Length tolerance: +/- 0,3 mm, depending on wire size, wire quality, condition of coil and pay of . Collecting station - 3 m

Year of construction: 2006, Condition: excellent (used), BOY 90A (102) without hopper General information Product Code: 102 Availability: In Stock Year of production: 2006 Brand: Boy Technical data Befydb3M Shot Weight: 193 g Clamping Force: 900 kN Screw dia: 42 mm Injection pressure: 1724 bar Tie bar distance: 430x360 mm Platen size: 635x610 mm Mould height min.: 250 mm Type of controls: Procan CT Language: German Power: 26,3 kW Workinghours: 15070 h Weight: 3100 kg Dimensions: 4,9x1,2x2,1 m Hopper: No

Condition: ready for operation (used), Year of construction: 1993, Output: 1000 envelopes/min, min/max envelope size: 90mm x 120mm/176mm x 254mm, roll unwind: Contiweb, web alignment system: 1x BST, print units: 5+0 or 4+1 Doctor Blade, ink tanks: 4x Inkcan, ink pump: 4x Pneumatic, window unit: traditional punching knives and adhesive paper. Includes Top and bottom scriber, time lubrication unit, latex and dextrin sealing, infrared drying, electronic counter and monitoring. Bn8Kpdsiyit

Condition: excellent (used), Year of construction: 2012, Mesh welding line EVG model ATT 10/102 M88Ockqhq Please see attached document.

Condition: used, fuel pump, supercharger carburettor Izo32Kq -Kyosan Denki: Type 10-2 -Price per piece -Quantity: 4 pieces -Dimensions: 200/100/H170 mm -Weight: 0.7kg/pcs

Year of construction: 2003, Condition: refurbished (used), KAJ & OLESEN BM. 102 Yundho ID.NO. 2192 Kaj & Olesen mod BM.102 pinebone remover. double-track year against 2003. Dimensions 180 x 85 cm H 165 cm. Bandwidth 58 cm.

Condition: good (used), Year of construction: 1999, Functionality: fully functional, FULLY AUTOMATIC - Mesh welding line EVG GD6 B9T8Fned Construction year – 1999. The line was refurbished in 2015. Production is stopped at the end of 2020. Available complete documentation. Spools are not included. Line wire pull-off system for 2 x 16 = 32 horizontal spools (spools by client) Line wire destressing unit DE 45/102 Line wire advance system TL RVD including pull-out and balancing device Cross wire advance system TQD 3000V Cross wire spool system SQ2 (2 pieces of spools) Welding machine EVG GD6-H: Working range: Number of line wires 20 Line wire diameter 3.3 – 10.0mm Cross wire diameter 3.3 – 10.0mm Cross wire spacing, steplessly adjustable from 100/150/200/250/300mm Line wire spacing (setting at delivery 100mm) 100/150/200/250/300mm Max. distance between outer line wires 2500mm Max. width of wire mesh 2400mm Technical data: (as equipped) Connection voltage (three-phase current) 50 Hz Nominal rating at 50% duty cycle 3 phase 1400 kVA Drive capacity 162 kW Number of transformers at 50% duty cycle 10 at 140 kVA Cooling water 150 l/min Line wire shear MD 35/102 Automatic mesh turning and stacking T 60/102 unit for max. 6 m Connecting roller conveyor Control unit, Siemens Simatic S7 – NEW

Condition: repair required (used), Functionality: limited functionality, Turning diameter over cross slide: 204 mm, The main bearings are worn. They need to be replaced. Machine is very complete. U0X2Vdnfqd

Condition: used, Year of construction: 2018, Machine/vehicle number: 727018, Getriebemotor für Heidelberg SM 102 / Gear Motor for Heidelberg SM 102 Baumüller F1ZF 13-ZRF 0.37/2-7R 2018 complete overhauld by Baumüller Serial-No. 727018/9 HDM 91.105.181 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect Djoqwl On Stock Emskirchen / Nürnberg - Can be test

Condition: good (used), Technical data: Isvlzcq Bed length: 900 mm Distance headstock - turret: 300 mm Center height: 102 mm Number of places in the turret: 6 Diameter of the holes: 20 mm Collet clearance: 22 mm Connection: 380 V Spindle speeds: 840 - 3000 rpm. with accessories Dimensions: (LxWxH): 900x1300x1310 mm Weight incl. pallet: approx. 650

Condition: used, Connectors, plugs, 1-wire female connector, Uzuhxcbfrt -Manufacturer: Wago, 1-conductor female connector Box with 50 pieces -Type: 769-102 2-pin -Price/Delivery: complete -Dimensions box: 280/80/H60 mm -Weight: 0.4 kg

Condition: new, Indramat TRK3-W22-WO/102 SO 02 - TRK3-W22-WO / 102 SO 02 3 pulse thyr. control amplifier S.Nr.215721-001531 ,unused, 100% functional, scope of delivery acc. photos Cj7Rbsz27E

Condition: as good as new (ex-display), EATON XV-102 3.5" touch panel XV-102-B4-35TQRF-10   Condition / Zustand  DE: unused in original packaging EN: unused in original packaging   Vw7F7Fz

Condition: used, Leuze stationary barcode reader BCL 304i SL 102 D ( 50116354 )   Condition / Zustand  DE: used EN: used   B7Yne2Zx