Markl Bavaria 40/8 Isobarometric Filler (2019)

Markl Druckfüller

Condition: used, Year of construction: 2021, Overview  This isobarometric filler was built in 2021 by the German manufacturer Markl. It can fill cans abd glass bottles. This filler is available because the seller is selling the complete equipment. It has only a few operating hours and can be viewed in person at any time.   Technical Details  Type: Isobarometric filler for bottles and cans Capacity: 8,000 bottles / hour (depending on format) Number of filling valves: 20 Formats:  Bottles: 0.33 L Longneck and 0.75 L Cava Cans: Standard 0.33 L and 0.44 L Counter-pressure filler Running direction: left - right Dimensions (L x W x H): 2.0 m x 1.8 m x 2.5 m Operating History: In operation: June 2021 – June 2024 Last production run: June 2024 Dismantled: February 2025 Estimated total working hours: approx. 625 hours (~500,000 liters filled at 2,500 units/hour) Good condition, ready for reinstallation Kedot Rmhmjpfx Af Sonf

Condition: good (used), Year of construction: 2013, operating hours: 1,000 h, Beer Filler, Counterpressure, Vipoll GEA, Type: Visipraktik VKR-ES-DN 12-3K, Year: 2013, capacity max. 3.000 bph, adjusted to 330 ml, double pre-evacuation, low operating hours, less than 1.000 hours, bottle diameter 50 - 105 mm, bottle hight 125 - 370 mm Knsdpfeq H Eamex Af Sjf Optional: Set of bottle conveyors, rotating table

Condition: used, Year of construction: 2007, Overview This wrap-around cardboard packer was built in 2007 by Italian manufacturer Ocme. The machine was installed in a non-returnable glass bottling line. The whole line was dismantled and sold as single machines. The WA packer is properly dismantled and stored. Techn. Details Capacity: up to 60 packs per minute Recently packed: 3x4 cardboard 4x6 cardboard 0,5 L glass bottles 0,33 L glass bottles Other formats possible Knedpotq Dzhefx Af Sef

Condition: used, Year of construction: 2012, Used Filling Monoblock CEM 6-6-1 for fermented beer 1000 bph The Used Filling Monoblock CEM 6-6-1 for fermented beer 1000 bph, built in 2012, has an operational system for filling fermented beverages and still wine. Consequently, this machine produces 1000 bottles per hour and maintains high-quality standards through rigorous maintenance and a robust component design. Introduction to the Filling Monoblock The filling monoblock for beer 1000bph integrates three main subsystems to create a continuous, streamlined workflow for washing, filling, and capping operations. Notably, the machine rotates in a clockwise direction, and therefore, this feature positively influences internal flow dynamics and process synchronization. In addition, the filling monoblock 1000bph supports efficient production and minimizes cycle times. General System Specifications of the Used Filling Monoblock CEM 6-6-1 for fermented beer 1000 bph Knjdpfx Asvvl Tiof Sjf The monoblock processes specific bottle formats with high efficiency. Specifically, it handles longneck bottles with a capacity of 0.33 L and Belgian bottles with a capacity of 0.75 L. Moreover, engineers incorporated 6 dummy bottles for circuit sanitization to ensure strict adherence to hygienic standards. Furthermore, the integrated operation of washing, filling, and capping within a single module enables the machine to achieve the output of 1000 bottles per hour. As a result, production remains highly streamlined and cost-effective. The Rinsing Unit The rinsing unit of the Filling monoblock for beer initiates the filling monoblock process and equips itself with 6 grippers to handle each bottle. First, it executes a single treatment cycle for each bottle, and then it cleans every bottle meticulously before the filling process begins. This method upholds high hygienic and quality standards. Additionally, the rinsing unit prevents contamination and promotes reliability in subsequent processes. Technical Aspects of the Rinsing Unit Gripper Configuration: The unit employs 6 grippers that handle each bottle precisely and in a controlled manner. Single Treatment Cycle: The system cleans each bottle individually, which significantly enhances cleaning efficiency and process reliability. Consequently, it improves overall production quality. The Filling System The filling phase uses a configuration with 6 valves evenly distributed along the monoblock, and it applies a gravity filling method with a fixed nozzle. Specifically, engineers designed this configuration to control the liquid flow accurately, and it adapts seamlessly to the different bottle formats—the longneck (0.33 L) and the Belgian (0.75 L). Accordingly, the arrangement of 6 valves and the gravity filling method enable the machine to meet the high throughput of 1000 bottles per hour. Moreover, it minimizes liquid waste and delivers consistent fill volumes, which further enhances the system’s efficiency.

Condition: not inspected (used), Year of construction: 2019, functionality: unexamined, Framax bottling line comprising: Knjdpfx Afswid Uko Sef Framax de-palletiser model Depal-Microlay-300 Framax model Modulblock RFCI-12/12/1-C+RP Rinser Filler Crowner, glass bottles, advised capacity 2,500bph on 275ml bottles Framax LLA-R-SQ-Turbo labeller Framax CIP system model CIP 0500X2 Framax skid mounted de-aerator system (100lt) Siat DX PS50 case taper Line conveyors

Condition: used, Year of construction: 1995, Used Filling Triblock GAI 12.1.16.1. 16 Valves 2500 Bph Rinsing machine with 12 grippers, applying a single treatment of air blown on the bottle mouth before straightening. Carousel grippers manually variable in height 1. 1-head station for vacuum and gas injection before the filling machine with variable head in height 2. Filling machine 16 light vacuum taps in bell Filling bell manually variable in height Mechanical spring bottle lifting pistons 1. capper 1 head straight cork Leveler before closing with gas injection In the used triblock there is the vacuum system before closing the bottle Head manually variable in height All frame made of stainless steel Knsdjvguz Djpfx Af Sef Fairing of stainless steel Safeguards on the whole perimeter Bottle from left side Year 1995 marked CE Production approximately 2.500 bph with the 0.75 Ml