Used Schaffer 5058 Zs for sale (1,707)

Condition: excellent (used), Cutting height: 15.5 cm, Cutting width: 38 cm, Pneumatic hold-down, Horizontal and vertical angle adjustment, Height adjustment, Year: 1992 Cgjdpfx Asx H Ixnefajl

Year of construction: 1998, condition: used, Max. saw blade diameter: 420 mm Codoxwylxopfx Afaegl Cutting height: 170 mm Miter range swivel with digital display: 45°-90°-25° Miter angle tilt with digital display: 90°-45° Hydraulic forward brake Pneumatic material clamps Saw blade spraying device Hand crank for tilting

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 3018/13, tank capacity: 200 l, total length: 1,000 mm, total width: 500 mm, total height: 1,470 mm, overall weight: 93 kg, operating temperature: 55 °C, pressure (max.): 10 bar, Equipment: CE marking, Aircraft compressed air technology, KB 2x100/10 tank battery, in very good condition, year of manufacture 2013 Cgodpfsx Ext Hjx Afasl The system is type-tested, so no TÜV approval is required Connection valves and pressure gauge are available

Condition: new, Year of construction: 2024, bore capacity in steel (diameter) 40 mm throat 297 mm bore stroke 120 mm speeds 8 / 75 - 1600 U/min table-size 500 x 460 mm spindle taper MK 4 column diameter 115 mm spindle feeds: 3 / 0,1 - 0,26 mm/U distance spindle /table 715 mm distance spindle/base plate 1180 mm engine output 1,5 kW table rotating 360 Grad Cgedpfx Afexuv I Rsael weight of the machine ca. 335 kg dimensions of the machine ca. 0,5 x 0,76 x 1,89 m Unused exhibition machine at a special price: Heavy geared boring machine with digital display for speed and drilling depth, hardened gears, thick-walled column, large table and base plate with T-slots, motorized table adjustment, electromagnetic feed engagement by means of snaps on the control lever. The machine has minor transport damage, see picture no. 6. This is a exhibition machine at a special price, so we are selling it without any warranty. Machine dealer with own stock of 1600 m².

Condition: used, Year of construction: 1996, Cutting height at 90°: 200 mm Cutting length: 410 mm Cgjdjxu Dhxspfx Afajl Mitre range horizontal: 45° - 90° - 25° Mitre range vertical: 60° - 90° - 30° Roller conveyor / support table: no Saw blade diameter: 520 mm Speed: 2800 rpm Motor power: 5 kW Motor brake: yes Extraction port: 100 mm Hold-down device: yes Machine length: Machine width: Weight: 300 kg

Condition: good (used), Year of construction: 1998, Manufacturer: Henninger Type: ZS-201 Year of manufacture: 1998 Self centerring device Double column slide ways Dressing Unit Tailstock by rack & pinion Eccentric adjustment 0 - 20 mm Large Cone-Stone tooling package Specifications Metric US Standard Minimum workpiece Ø 20 Ø Min. Cgsdpfx Afovt Tuieael Maximum workpiece Ø 450 Ø Max. Max. product length 1200 mm Speed 18300 Rpm Max. grinding angle 45 - 120 ° Max. workpiece weight 190 Dimensions (estimate) Length 1250 mm Width 1250 mm Height 1900 mm Weight 365 kg Please note: The information on this page has been compiled to the best of our knowledge and belief by us and, where possible, by the manufacturer. The information is provided in good faith but accuracy cannot be guaranteed. Accordingly, it will not constitute a representation and terms of contract. We recommend that you review all important details.

Condition: used, machine/vehicle number: 11974, load capacity: 5,000 kg, lifting height: 5,500 mm, free lift: 450 mm, mast type: duplex, construction height: 4,050 mm, fork length: 2,100 mm, total length: 3,250 mm, drive type: Elektro, construction width: 3,000 mm, Four-way sideloader Chassis number: 11974 Load center: 1050 mm ISO class: ISO class 4 = 5,000 - 10,000 kg Mast type: Duplex Technical condition: very good Front tires type: Vulkollan Front tires Size: 2-fold new Front tires Condition: 80 - 100% Rear tires Type: Vulkollan Cjdpfju D R Hujx Afaegl Rear tires Size: 4-ply new Rear tires Condition: 80 - 100% Battery Volt: 80V Battery Ah: 775Ah Battery manufacturer: New with Aquamatic 5PzS Battery year of construction: 2017 Battery condition: 80 - 100% Description: Travel drive 2x5kW, working hydraulics 2 x 8 kW, steering hydraulics 1x1.5kW height extended 6650 mm platform height 420 mm frame cutout 1300 mm mast extension 2200 mm The machine is sanded down repainted, all motors newly revised new hydraulic hoses and new tires, new battery with Aquamatic and charger so the machine is as good as new again Fork positioner, implement length over carrier 3950 mm fork adjustment 580-3300 mm fork tilt +/-3.5° side guide rollers on request Roof cover, Glazed cab front and rear

Condition: excellent (used), Year of construction: 1990, Radial saw ZS135 Year of manufacture: 1990 On stand With pneumatic clamp Hydraulic feed brake Csdpot Sin Sefx Afajgl Saw blade for aluminium 2 kW / 380 Volt

Condition: excellent (used), functionality: fully functional, saw blade diameter: 520 mm, rotational speed (max.): 2,800 rpm, cutting width (max.): 295 mm, overall weight: 300 kg, extraction nozzle diameter: 100 mm, saw blade bore: 50 mm, cutting depth: 200 mm, input voltage: 400 V, power: 5 kW (6.80 HP), input frequency: 50 Hz, Further technical data Cutting width: 90° 420 mm | swivelled at 45° 295 mm Cutting depth: tilted at 45/90 degrees 140 mm | 200 mm Special equipment 1019 Machine tiltable on both sides from the front via hand crank Cgodpfx Afextpuusaol 1002 Hydraulic feed brake 1049 HM circular saw blade for wood 520x4.0x50 mm / 60 teeth negative

Condition: new, saw blade diameter 420 x Ø 40 mm cutting diameter 170 mm cutting length 410 mm dimensions of saw-blade 420x3,2/2,4x40 mm turning speeds 3500 U/min Dust suction hood 100 mm total power requirement 3,0 kW weight of the machine ca. 120 kg dimensions of the machine ca. 1300 x 800 x 1600 mm - Cross-cut and miter saws for cross-cut cuts - Miter adjustment on both sides (60 ° / 45 °), with fixed stop - Shifter cut on both sides 45 °, with fixed stop - Stable cast iron construction - Precise linear bushing guide on the tool slide hardened and ground steel shafts - manual saw feed - Saw blade infinitely adjustable in height - nozzle for opt. Suction Cutting data: - Cutting length at 90 ° = 410 mm - Cutting height at 90 ° = 170 mm - Cutting length at 45 ° = 290 mm - Cutting height at 45 ° = 115 mm Special accessories included: - Adjustment of shifter cut via hand crank, both. adjustable (45 ° / 45 °) - HM circular saw blade 420x3.2 / 2.6x40 mm Z = 108 FTZ neg. For aluminum and plastic Cgsdpfxjxabzto Afael - hydraulic feed brake, infinitely adjustable - pneumatic material clamping from above consisting of: 2 vertical clamping cylinders, adjustable, with hand lever valve - machine stand

Condition: new, Year of construction: 2025, Depth of cut at 90°: 200 mm Cjdpfeiy Ry Aex Afaegl Depth of cut at 45°: 140 mm Cutting width at 90°: 420 mm Cutting width at 45°: 295 mm Miter range horizontal: 45° -90° -25° Miter range vertically: 60° -90° -30° Sawblade diameter: 520 mm rpm: 2800 U/min Motor: 5 kW motor brake: yes suction plant diameter: 100 mm weight: 490 kg

Condition: new, Year of construction: 2025, The CORMAK ZS-40B industrial geared pillar drill is a solid tool with great potential. Equipped with a height-adjustable swivel head, automatic threading device and a precision handwheel, it ensures flexibility and accuracy in work. The powerful engine guarantees high drilling efficiency, and the solid construction and hardened oil gear wheels ensure stability and durability. The drill comes with a set of threading holders, extending the capabilities of this professional tool. Additionally equipped with autofeed and cooling. Machine characteristics Very high work flexibility thanks to the swivel, height-adjustable head Cooling system L/R rotation, automatic threading device Precision handwheel with depth scale Hardened oil gear wheels High stability and quality of processed elements thanks to a solid base. Powerful motor ensuring good drilling performance. Rigid, thickened column with a polished surface Large turntable with height adjustment Possibility to set a vice Technical data DRILLING DIAMETER (CAST IRON/STEEL) Csdpfx Aoridv Ssfajgl 40/32mm THREADING (CAST IRON/STEEL) M32/M24 COLUMN DIAMETER 115mm SPINDLE DISTANCE FROM THE COLUMN AXIS 260mm MAX. DISTANCE OF THE SPINDLE END TO THE WORK TABLE 754mm MAX. DISTANCE OF SPINDLE TIP TO BASE 1270 mm SPINDLE TAPER MK4 SPINDLE SPEED 50 - 2520 rpm. NUMBER OF GEARS 6 FEED RANGES 0.12; 0.18; 0.25 mm/rev DIMENSIONS OF THE WORKTABLE SURFACE 354x575mm OVERALL HEIGHT 2120mm ENGINE POWER 1.5 kW POWER 400V/50Hz WEIGHT U 350kg

Condition: used, machine/vehicle number: 9-12786, Year of construction: 1992, operating hours: 15 h, load capacity: 5,000 kg, lifting height: 5,050 mm, free lift: 2,800 mm, mast type: duplex, construction height: 3,450 mm, fork carriage width: 3,560 mm, fork length: 1,650 mm, total length: 3,560 mm, drive type: Elektro, construction width: 2,600 mm, Four-way sideloader Chassis number: 9-12786 Load center: 825 mm ISO class: ISO class 4 = 5,000 - 10,000 kg Mast type: Duplex Condition: New machine Technical condition: Very good Front tires Type: Vulkollan Front tires Size: 2-fold new Front tires Condition: 80 - 100% Rear tires Type: Vulkollan Rear tires Size: 4-ply new Rear tires Condition: 80 - 100% Battery Volt: 80V Battery Ah: 775Ah Battery manufacturer: New with Aquamatic Battery type: PzS Cedpeu D R Ewefx Afasgl Battery year of manufacture: 2023 Battery condition: 80 - 100% Description: New value 2023 / 1992 Entire machine dismantled down to the base frame and rebuilt - The truck was completely dismantled down to the base frame and sanded down. - Priming and new painting of frame and lift mast - New battery year of construction June 2023 with Aquamatik and charger latest charging technology - Lift mast completely disassembled, all rollers + bearings replaced. - Lift chains, fork adjustment chain, and steering chain replaced - All hydraulic hoses on the entire machine + lift mast replaced, list with connections and masses - All hydraulic cylinders are newly sealed - 2 front drive drums replaced - 4 trailing drums replaced - Control and electronics have been revised - New driver's seat, as well as displays, ignition lock, operating hours counter and direction switch - 2x travel motors, 2x pump motors and 1x steering pump motor completely revised - Brakes completely new, wheel drives revised. - Cabin 3-sided and roof with art glass mounted - Service complete, all oils and filters replaced - Safety and fork test - Drive 2x5kW, working hydraulics 2 x 8 kW, steering hydraulics 1x1.5kW Fork positioner, Implement length over carrier 3560 mm Fork adjustment 580-3300 mm Fork tilt +/-3.5° Side guide rollers on request 3rd valve, 4th valve, roof cover, half-cab, 2 work lights 1 rotating beacon Driver's cab 3 sides Plexiglas

Condition: used, functionality: fully functional, power: 150 kW (203.94 HP), empty load weight: 36,000 kg, Year of construction: 2007, operating hours: 10,000 h, Equipment: air conditioning, gripper hydraulics, hammer hydraulics, Liebherr R934 C HDS Crawler Excavator Year of manufacture: 2007 10,000 operating hours Codpfxoxq A Dkj Afasgl Approx. 36,000 kg 150 kW Liebherr engine, 4 cylinders OQ 70/55 SW fully hydraulic quick coupler All hydraulic lines installed Extended monoblock boom Air conditioning Central lubrication system 140 cm digging bucket

Condition: good (used), Year of construction: 1989, Vertical crushing plant Voest Alpine ZS 100 Basic year of construction 1989 (machine/rotor completely overhauled) Machine number 89 914 04 incl. drive motor 145 KW Cgsdpfxju U Ukio Afasl

Condition: new, saw blade diameter 350 x Ø 30/40 mm cutting diameter 135 mm cutting length 430 mm Cgedpfexabqzex Afasl dimensions of saw-blade 350x3,0/2,4x40 mm turning speeds 3800 U/min Dust suction hood 100 mm total power requirement 3,0 kW weight of the machine ca. 100 kg dimensions of the machine ca. 1300 x 800 x 1600 mm - Crosscut and miter saws for crosscuts - Miter adjustment on both sides (60° / 45°), with fixed stop - Compound cut on one side up to 45°, with fixed stop - Stable cast iron construction - Precise ball bearing guidance of the tool slide hardened and welded steel shafts - manual saw feed - Saw blade infinitely adjustable in height - socket for opt. suction Cutting data : - Cutting length at 90° = 430 mm - Cutting height at 90° = 135 mm - Cutting length at 45° = 310 mm - Cutting height at 45° = 92 mm Special accessories included: - 1x HM circular saw blade 350 x 3.0/2.4 x 40 mm Z = 108 FTZ neg. for aluminum and plastic - Hydraulic feed brake, continuously adjustable - Pneumatic material clamping from above consisting of: 2x vertical clamping cylinders, adjustable with hand levervalve - 1x machine stand - more powerful drive motor (3.0 kW)

Condition: new, Year of construction: 2024, cutting hight at 90°: 200 mm cutting width: 410 mm miter square horizontal: 45° - 90° - 25° miter square vertical: 60° - 90° -30° roller convoyer/ supporting table: no saw blade diameter: 520 mm speed: 2800U/min Cgodpfx Afeiuld Seajl motor power: 5 kW motor brake: yes suction connection: 100mm machine length: machine width: Gewicht: 300kg

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, saw blade diameter: 300 mm, Motor 400 V / 2.0 kW Speed 2800 rpm Cutting width: 380 mm at 90° 270 mm at 45° Cutting height: 85 mm at 90° 60 mm at 45° tilted Mitre range horizontal: 45°-90°-45° Cedpfoxpphyex Afajgl Mitre range vertical: 90°-45° to the left Saw blade Ø: 300 mm Extraction port Ø: 75 mm

Condition: good (used), Abrasive bodies, ceramic grinding bodies, polishing bodies for round vibrators, vibratory grinding systems, vibratory grinding round vibrators, trowal systems, continuous vibrators, ceramic grinding bodies -Manufacturer: Walther Trowal, ceramic grinding wheel type C 15 x 30 ZS Ultra-Chips -Grain: see photos -Price/tax: complete -Transport dimensions: 900/200/H500 mm -Total weight: 76 kg Cgodpjrxw E Nefx Afael

Condition: ready for operation (used), Year of construction: 2004, operating hours: 26,583 h, functionality: fully functional, machine/vehicle number: A0248, workpiece diameter (max.): 130 mm, TECHNICAL DETAILS Workpiece diameter (max.): 130 mm Number of axes: X, Z, A, B, C (0–3) Electrical Power consumption: 47 kVA Voltage: 400 V Cgjdpfxswmc Ido Afasl Frequency: 50 Hz

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 700.160, This cylindrical screening machine was used for the fractionation of hemp seeds. Three fractions can be produced. Other machines are also for sale. See the PDF document below. Cedpfjxn Hw Aox Afaegl

Condition: new, saw blade diameter 520 x Ø 50 mm cutting diameter 200 mm cutting length 420 mm Cutting height at 45° 140 mm dimensions of saw-blade 520x3,6/3,0x50 mm turning speeds 2800 U/min Dust suction hood 100 mm total power requirement 3,0 kW weight of the machine ca. 310 kg. range L-W-H 1400 x 900 x 1650 mm - Crosscut and miter saws for crosscuts - Miter adjustment on both sides (60°/45°), with fixed stops - Shift cut on both sides (60°/45°), with fixed stops - Stable cast iron construction - Precise ball bearing guidance of the tool slide hardened and welded steel shafts - manual saw feed - Saw blade infinitely adjustable in height - socket for opt. suction Furnishing : - 3.0 kW motor for ALU cuttings - Saw blade can be tilted via handwheel and worm gear (shift cut) Cjdpfjxaaxdex Afaogl - Saw blade diameter 520 mm - Saw blade mounting hole 50 mm - Saw blade speed 2,800 rpm - 400 Volt / 3 kW (S6/40%) motor with brake and automatic. Star-delta motor circuit - Machine weight approx. 250 kg Cutting data : - Cutting length at 90° = 420 mm - Cutting height at 90° = 200 mm - Cutting length at 45° = 295 mm - Cutting height at 45° = 140 mm Special accessories included: - HM saw blade 520x3.6/3.0x50 mm - Hydraulic feed brake, continuously adjustable - Pneumatic material clamping from above best. from : 2 vertical clamping cylinders adjustable with lever valve - pneumaschine saw blade spray device - Machine can be tilted from the front on both sides using a hand crank - Machine stand

Condition: new, Year of construction: 2022, New machine Year of manufacture 2022 Motor 400 V / 5.0 kW speed 2800 rpm cutting length 420 mm Cutting width 420 mm at 90 Cgjdpjkwhmfofx Afasl 295 mm at 45° Cutting height 200 mm at 90° 140 mm at 45 Saw can be tilted on one side up to approx. 25° to acute angles and tilted flat to the left up to 30°. Saw blade-Ø 520 mm x 50 mm suction nozzle-Ø 100 mm Weight 250kg With the following equipment options: - HM circular saw blade 520x4,0/2,8 x 50 60 WZ for wood - Machine can be tilted on both sides from the front via hand crank Availability: short term/2022 Location: Solingen

Year of construction: 1996, condition: used, Max. saw blade diameter: 520 mm Cutting height: 200 mm at 90°, 140 mm at 45° Cutting length: 420 mm Mitre range horizontal: 45°-90°-25° Mitre range vertical: 60°-90°-30° Pneumatic material clamps Cgodpowyur Isfx Afasl Minimum quantity spray device Powerful 5 KW motor

Condition: used, Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 80 mm -without: interchangeable jaws -Flange: 175 mm -Passage: Ø 19 mm -Dimensions: Ø 175 x 250 mm Cgjdedzzguepfx Afaol -Weight: 8.9 kg