Used Allcat Pt 1865 for sale (53,270)

Condition: excellent (used), Year of construction: 2004, operating hours: 1,000 h, Functionality: fully functional, turning diameter over cross slide: 380 mm, turning length: 350 mm, turning diameter: 200 mm, travel distance X-axis: 240 mm, rapid traverse X-axis: 12 m/min, Hembrug Mill-Turn Machine Model: Slantbed Mikroturn 100 CNC Siemens 840D Control Dkob Exmjwcfgbjtgel Approximate Actual Run Time Hours: 1,000 Hydeostatic Spindle Hydrostatic Ways Scale Feedback Suspended Granite Bed Garnite Spindle Housing Coolant Pump Coolant Circulation Pump Pneumatic Bearing Purge Hydraulic Temperature Control Coolant Temperature Control Return Oil Pump and Reservoir for Remote Location of Hydraulic / Cooling Unit. Options & Additional Purchased Features: Tailstock Vacuum Pump for Vacuum Chucking Programable Controlled Spray Mist C-Axis Milling / Drilling Renishaw Tool Touch Probe Non-Contact Tool Incoming Air Dryer / Filter Thousands of Dollars of Brand New Tooling: Live Center Tailstock Taper Adapter 8” Micro-Centric Pneumatic Chuck 3 Sauter Straight Live tooling heads 2 Sauter 90 degree Live tooling heads 1 Special VDI offset Tooling holder 16 VDI Tool Holders for Turning, boring, and on center drilling. Tool Pick-up Video System Additional Backup Hard Drive with Software Fully Loaded and Tested. Extra Siemens Control Pannel Complete Set of Manuals Machine Upgrades I added at additional cost. New Digital Hard Drive New Backup Hard Drive with software already loaded, plug and play ready, no downtime. New Z-Axis Heidenhain Scale Rewound Hydraulic Pump Motor, factory motor was running too hot for my liking. Replaced Operator Panel, back light on monitor went out, have the original, back light needs replacing. 50 Foot Extended Wiring Harness For Remote Location of Hydraulic / Cooling Unit.

Condition: excellent (used), Year of construction: 2010, machine/vehicle number: 1040-0016, STUDER S22 Cylindrical Grinder (used) Mfd 2010 Serial #: 1040-0016 with Auto-Load and Fanuc Robot load system, low hours, well maintained, many spares and extra wheels, fixtures, etc. Available immediately. It has straight, fixed wheel-head and was set up for OD’s only. It can grind multiple OD’s simultaneously, but does not do ID’s or faces on the work piece. Ideally suited for a production environment. SPECIFICATIONS SWING: 14" PLAIN OR ANGLE HEAD: Plain GRINDING WHEEL DIA.: 24" CONTROL: CNC (Fanuc) The S22 is a production platform for the mass production of medium-sized workpieces. It has distances between centres of 650mm (25.6") / 1100mm (43.3") and centre heights of 175mm (6.9") / 225mm (8.8"). It can machine workpieces with a maximum weight of 150kg (330lbs). The S22 with its extensive expansion options can be configured for every grinding application to be the perfect production machine. Highly dynamic axis drives, high-quality STUDER guideway systems, short reaction times and optimized traverses form the basis of the S22. The high-speed grinding option (HSG) contributes to increasing productivity with its peripheral speed of up to 140m/s (27,600 sfpm). Hardware: GranitanR S103 mineral casting machine base Cross slide X: anti-friction guideways with ball-screw Longitudinal slide Z: guideway with patented surface structure and ballscrew drive C-axis for the workhead Application-specific workhead concepts Additional NC axis for profiling the grinding wheel Full enclosure with movable front panels for optimal accessibility Integrated loading unit or loading cell for loading and unloading from left, right or above Large range of accessories Software: Easy programming with StuderWIN on Fanuc 31i-A StuderGRIND programming software to create grinding and dressing programs Standardized interfaces for loader and peripheral devices EQUIPPED WITH Fanuc 31i-A control Full C Axis work head 24" fixed straight wheel Auto Load Fanuc Robot System Fixtures Extra Wheels Spare Parts Low Hours Extremely well maintained Deb Exmtov Dazwjgekl

Condition: excellent (used), CNC Control 32i-Model B CNC Control Type Fanuc Turning Diameter: 17.72″ Chuck Size: 23.6″ Dkeb Exmswa Tz Ustgol Spindle Speed: Up to 3500 RPM Dimensions: 118 x 75 x 102 inches Weight: 24,251 lbs Max Process Speed: 30 m/min Ball Screw Diameter: X1=1.6″, Z1=1.6″ Number of Tools: 12 Tool Holder: VD140/50 Tool Flight Circle: 24.4″ Spindle Bearing Diameter: 5.9″ Drive Power: 52 kW (100% CDF), 67 kW (40% CDF) Rated Speed: 1,200 RPM Max Speed: 3,500 RPM Tailstock Features: Working Stroke: 7.9″ Spindle Bearing: Rigid, without bearing Max Peak Distance: 25.2″ Pressing Force: 850 daN Center Point Adapter: MK4

Year of construction: 2012, Condition: ready for operation (used), General Data Measurements width 1000 mm Measurements depth 1700 mm Measurements height 870 mm Machine weight 11974 kg Control Unit Dksb Exewfurlsmtgol Brand MAZATROL Main Drive Number of spindles 2 Spindle speed range 4000 RPM Spindle motor power 30 HP Spindle bore 87,884 mm Number of axis 3 Movement X-Axis Movement 309.88 X-Axis Rapid Traverse 945 IPM Y-Axis Movement 76.2 mm Z-Axis Movement 605.028 mm Z-Axis Rapid Traverse 945 IPM Turret Number of turrets 2 Rotating tools Yes Tools Number of station 12 Additional Equipment Max Cutting Length (Chucker): 225 mm Max Distance Between Spindle Faces: 1450 mm Min Distance Between Spindle Faces: 249.42mm General Data Measurements width 1000 mm Measurements depth 1700 mm Measurements height 870 mm Machine weight 11974 kg Control Unit Brand MAZATROL Main Drive Number of spindles 2 Spindle speed range 4000 RPM Spindle motor power 30 HP Spindle bore 87,884 mm Number of axis 3 Movement X-Axis Movement 309.88 X-Axis Rapid Traverse 945 IPM Y-Axis Movement 76.2 mm Z-Axis Movement 605.028 mm Z-Axis Rapid Traverse 945 IPM Turret Number of turrets 2 Rotating tools Yes Tools Number of station 12 Additional Equipment Max Cutting Length (Chucker): 225 mm Max Distance Between Spindle Faces: 1450 mm Min Distance Between Spindle Faces: 249.42mm This 3-axis Mazak Multiplex 6300-II Y was manufactured in 2012, offering robust capabilities for horizontal turning. Ideal for precision machining, this used machine maintains a solid performance record. Consider the opportunity to buy this Mazak Multiplex 6300-II Y horizontal turning machine. Contact us for more information about this machine. Application Types Turning

Year of construction: 1994, Condition: good (used), machine/vehicle number: 491P, Technical data: - Drilling capacity in steel ST 60 28 mm Dkob Esdkx Anexmtgsl - Drilling capacity in steel ST 60 32 mm - Drilling spindle adaptor MK 3 - right - left rotation - Drilling spindle stroke 150 mm - drilling spindle speed infinitely variable 80 - 1170 rpm - 2 feeds 0,1 / 0,2 mm/rev - throat 290 mm - max distance table - drilling spindle 780 mm - table with 2 T-slots 480 x 400 mm - Height adjustable via toothed rack with hand crank - Drive 400 V / 0,9 / 1,3 kW - Space requirement approx. W 600 x H 2100 x D 900 mm - Weight approx. 420 kg - with: - coolant device - quick-action drill chuck 1-13 - illumination

Year of construction: 2017, Condition: excellent (used), machine/vehicle number: #2T1-1001 , The SHD2400S Skiving & Roller Burnishing machine was used as a beta test machine from May 2017 through May 2019 and is available for sale at a discounted price. The machine is offered with a 3 year warranty at the time of installation. SHD2400S skiving and roller burnishing machine features: Maximum part length 2 m (6.56 ft.) Spindle Power: 57 kW (76 hp) induction motor Diameter range 50-180 mm (2”-7”) 400 VAC/50 Hz or 460 VAC/60 Hz compatible Djb Ejh Aywnjxmtgskl Machine includes pressure head PH2460001 and SHD8200 Coolant system with filtration Dirty and clean tank capacity 1130 gallons each (2260 gallons total) Optional double wall tank for added leak protection

Year of construction: 1998, Condition: excellent (used), machine/vehicle number: ExCello Serial Number 3888, MICHIGAN Rotoflo Type 3237 Cold Forming Machine. Original Serial Number: 4590 ExCello Serial Number 3888 New 1975 rebuilt by ExCello late 1990’s Country of Origin: USA For the coldforming of profiles for serrations (straight or angular), Dsb Eofnk Ehsxmtgjkl spiral teeth, oil grooves, threads and knurls. Capacity: Maximum slide stroke 1065 mm Maximum rack length 915 mm Maximum profile diameter 50 mm Maximum profile length 125 mm Standard module range 0.3 to 1.25 Motor size 15 kW Hydraulic tank capacity 1000 l Overall floorspace width of machine 5014 mm Width of machine 2768 mm Depth with outboard support 4165 mm Height 2000 mm Approximate weight of machine 11,700 kgs Complete with: Hydraulically operated outer support assembly to accommodate part length universal headstock, Universal rack holding feature.

Condition: new, Year of construction: 2024, Functionality: fully functional, machine/vehicle number: 50, laser power: 12,000 W, working range: 715 mm, total length: 260,000 mm, workpiece weight (max.): 1,500 kg, warranty duration: 60 months, cutting speed: 100 mm/min, Equipment: cooling unit, HSG Laser | TX 3+1 Heavy-duty Tube Fiber Laser Cutting Machine Dsb Exmtortiiregjkl Size: 7026mm, 9032mm, 12036mm, 12050mm Laser source power: 3000 - 12000W Cutting Capacity: Round tube: Φ15-500 (TL Φ15-715); Square tube: □15*15 - 350*350 Rectangular diagonal ≤ 500mm Optional function: automatic loading and unloading system 3+1 Twin-chucks Clamping Cutting Technique

Year of construction: 2008, operating hours: 1 h, Condition: used, Functionality: fully functional, machine/vehicle number: STCOS M5, Burr Oak Single Tube Cut-Off System Model: STCOS M5 Year:2007 Specifications Machine Code: LHM, SWS, 36HF, SCO, SPA, 12ROHG, ECTG Cut-Off - Tcd Standard Djb Exmtsv Nak Aegjkl Hitch Feed - Tcd Standard Straightener – Tcd Standard W/ Sizing Pull-Apart – Tcd Standard Coil Stand – Tcd 3 Position Over Head Uncoiler Runout Table - Tcd 12’ Runout Table W/ Hinge Gate Supply: 480 Volts, 3 Phase, 60 Hertz Control: 110/24 Volts Extra Options The Hinge Gate Run Out Table Needs To Be Able To Switch From One Side To The Other Tooling – Tcd .500” O.D. Complete Set With 14 Straightening Rolls, 4 Sizing Rolls 6 Pair Clamp Jaws (Total), 1 Exit Guide Tube, (3) Tube Entry Bullets And Connectors .375” O.D. Complete Set With 14 Straightening Rolls, 4 Sizing Rolls 6 Pair Clamp Jaws (Total), 1 Exit Guide Tube, (3) Tube Entry Bullets And Connectors

Year of construction: 2009, Condition: ready for operation (used), General Data Measurements width 1879,6 mm Measurements depth 2743.2 mm Measurements height 1905 mm Machine weight 11000 kg Control Unit Brand MAZATROL Main Drive Spindle speed range 4000 RPM Spindle motor power 35 HP Spindle bore 76.2 mm Number of axis 2 Movement X-Axis Movement 177,8 mm Z-Axis Movement 558,8 mm Workpiece Workpiece drm over bed 6731 mm Turret Number of turrets 1 Tools Number of station 12 This Mazak QTN 250-II was manufactured in 2009. A robust horizontal turning machine, it offers reliable performance for precision machining. Ideal for those looking to enhance their machining capabilities with a proven model. Contact us for more information. Dob Exewfuqzjmtgekl Application Types Turning

Condition: good (used), Year of construction: 2003, NAGEL MODEL TBT M320-6 6 SPINDLE CNC HORIZONTAL GUN DRILL, 2003 Equipped with: Panel Mate Power Pro Control Counter Rotation Cross Drilling High Pressure Coolant System Auto Loader Magnetic Chip Separator Hydraulic System Chiller Specifications: Maximum Drill Depth (Approx): 16" Maximum Drill Length: 36" Number of Drill Spindles: 6 Spindle Motors (3): 7.5HP HP Per Spindle: 3.75 Drill Head Slide Stroke: 16.9" Dksbortrzto Exmtgel Maximum Diameter Mild Steel: 0.750"

Condition: good (used), Year of construction: 2007, max. wheel diameter 500 mm gear width 200-400 mm module 12 turning speeds 0-3250 U/min bracke pressure bis max. 95 Nm inner taper Konus #39 Control Fanuc 16 total power requirement 15 kW Djb Exmtovr Hf Eogskl weight of the machine ca. 6 t dimensions of the machine ca. 2.350 x 2.240 x 2.500 mm HIGHLY FLEXIBLE TESTING OF HARD, FINISHED AND GREEN SPIRAL BEVEL AND HYPOID GEAR SETS The T 60 bevel gear testing machine is a CNC testing machine with three linear axes for the fully automatic hard and soft testing of spiral bevel and hypoid gear sets with a 90° axis angle. It offers versatile objective and subjective testing options with speeds up to 3,250 min and braking torques up to max. 95 Nm.

Condition: used, Functionality: fully functional, Year of construction: 1972, machine/vehicle number: 619336-KL, load capacity: 14,400 kg, cutting length (max.): 1,150 mm, alignment: Sí, alineado y freno independiente por eje/flecha, paper weight (max.): 900 g/m², paper width (max.): 1,850 mm, number of blades: 3, number of shafts: 12, Equipment: tail-lift, Price to be negotiated, schedule a visit without obligation. HAM-LET Brand Cutting Machine Model 1972 Incorporates a head with blades up to 73" wide to make cuts with adjustable length by means of a gear system and a variable diameter pulley. Includes 4 gears to adjust the measurement from 30cm to 115cm in length. Includes 3 circular blades with a base for additional cross cuts (variable width). The cutting capacity is ~80 cuts/min, it is capable of cutting sheets with a total thickness of 900 grs/m2. The speed of the head is adjustable, to adapt to different production rates. Includes a sheet counter (cut counter). Reinforced Beam Structure Made of high-strength beam/joist (not PTR), capable of mounting up to 12 arrows (axles or bars) for paper rolls with a total weight of 14.4ton. Each arrow has independent brakes and manual alignment, guaranteeing precise unwinding and safe. Conveyor Belt System Composed of adjustable speed belts that lead the cut paper to the elevator, in the stacking area. With alignment mechanism. Elevator with 1 ton capacity Receives and stacks the cut sheets in an orderly manner, with a mechanical aligner. Status and Availability Currently in operation and in perfect working condition. 90% of its components are original or renewed with equivalent or superior parts; 10% corresponds to adaptations that improve performance. Constant maintenance, ready to be installed in the production line. Complete Set for Sale Includes the cutting machine, beam structure, belt system, elevator and sheet counter. Ideal for printing, cardboard and paper cutting in general (bond paper, newspaper, kraft, caple, etc.). SECTION SPECIFICATIONS Cutting Machine Brand and Year Brand and Year - HAM-LET Model 1972 - Serial No.: 619336-KL Feed and Cutting Rolls - Head for up to 73" blade - 3 Blades 73" long × 2" thick, cobalt tipped (rippling) - Rubber Roller: 75" long, with pressure/gap adjustment from cast iron roller - Cast iron roller (New): 75" long - Protective frame to prevent contact with gears, belts and pulleys) Cross Cut - Holder for 3 circular blades (includes 3 bases for mounting) Cutting Length Adjustment - Gear drive to modify the rotation ratio of the Roller with blade - 4 gears included for measurements: ~35cm, ~55cm, ~65cm, ~85cm Debov Ihiqe Exmtgskl - Belt system with variable diameter pulley (with “claws”) for precise adjustment of the cutting measurement ±20cm Motor and Controls - 15 HP three-phase motor, up to 1750RPM (semi-new) - Adjustable speed by knob (next to the elevator) - Control panel with power button, emergency stop button - Sheet or cut counter (display next to the elevator) Construction - Cast iron frame, modular and disassemblable design

Condition: new, Year of construction: 2022, Base sheet fiber laser metal cutting machine with full protection Maximum cutting area reaches up to 12000mm*2500mm, suitable for a variety of cutting options. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Cutting performance and efficiency are improved by maintaining gas flow steady with little turbulence. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The cutting process works even at the edge of thin sheets, and ensures no chatter marks. With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Condition: New Laser Type: Fiber Laser Laser Power: 1000W - 40000W Cutting Area: 3048*1524mm - 12500*2600mm Cutting Speed: 0-110m/min Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Dksb Exmshwhfqotgol Cooling Mode: WATER COOLING

Year of construction: 2023, Condition: new, Functionality: fully functional, operating temperature: 1,500 °C, COMPLETE SYSTEM INCLUDING: (2) NEL C30 Hydrogen Generators On Site Gas System N-500 TGN Nitrogen Generator 110 MoLa Carrier Tray Sets RO/DI Water System Bus Rail TRAY SIZE: 330 mm W x 330 mm L LOADING HEIGHT: 300 mm H CAPACITY IN 316L CYCLE: 8-10 Trays/hr NUMBER OF REST DEBINDING ZONES: 10 x 20 kW Top/Bottom Control NUMBER OF SINTERING ZONES: 10 x 30 kW SEGMENTS OF COOLING ZONE: 2 x 3m, 1 x 2m +Belt Drive and Return MAXIMUM TEMPERATURE REST DEBINDING: 800 C MAXIMUM SINTERING TEMPERATURE: 1,500 C PROCESS GAS CONSUMPTION (H2): 30-50 m3/h PURGE LOCK NITROGEN GAS CONSUMPTION: 34 m3/h POWER CONSUMPTION: 70kWh COOLING WATER CONSUMPTION: 3 m3/h POWER: 3 x 480V / 60Hz INSTALLED POWER: 500 kW IDLE MODE NITROGEN GAS CONSUMTPION: 15-16 m3/h Djbotxbuxj Exmtgokl IDLE MODE HYDROGEN GAS CONSUMPTION: 1-1.5 m3/h

Condition: new, Year of construction: 2022, All-round sheet fiber laser metal cutting machine Equipped with automatic functions of nozzle changing and one-click processing, P-Series is competent for all cutting demands. Flake graphite in the cutting machine bed improves greatly the shock absorption and wear resistance, and residual stress almost disappears after age hardening, therefore, precision and lifetime of the equipment are improved, and costs saved. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The fully closed-loop control adjusts according to feedback to ensure that the actual motion position is consistent with the theoretical input value. Dkebshwhf Ae Exmtgsl With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Condition: New Laser Type: Fiber Laser Laser Power: 1500W - 30000W Cutting Area: 3048*1524mm - 6100*2500mm Cutting Speed: 0-169m/min Positioning accuracy: ±0.03mm - ±0.05mm Repositioning accuracy: ±0.02mm - ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: good (used), Year of construction: 2015, machine/vehicle number: 190630, turning length: 150 mm, turning diameter: 200 mm, spindle bore: 42 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 50 rpm, travel distance X-axis: 150 mm, travel distance Z-axis: 155 mm, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, turning diameter over bed slide: 220 mm, overall weight: 5,000 kg, spindle nose: 140 Flat, bar diameter: 51 mm, power: 0.015 kW (0.02 HP), The innovative front-facing spindle of the 2SP-150H helps create an automation-friendly lathe for small parts production. By moving the spindle off the side and incorporating the Okuma Gantry Loader (OGL) into the production line, parts can be loaded and unloaded automatically. An extremely compact footprint improves floor space utilization, while the popular dual spindle option significantly reduces cycle time. Equipped with: Okuma OSP-P300L CNC Control 8" 3-Jaw Chuck Expanding Mandrel Turret Tooling Gantry Loader Pendant Controller Chip Auger Djb Exmortrlzstgokl Stack Light

Condition: used, Year of construction: 2015, machine/vehicle number: 25600, rotational speed (min.): 30 rpm, grinding wheel speed: 17,000 rpm, grinding wheel diameter: 300 mm, overall weight: 29,000 kg, grinding wheel width: 60 mm, table diameter: 930 mm, Equipped with: Siemens Sinumerik 840D Control Extended 1500 mm Gear Diameter Extended Working Stroke (Y Axis) 1500 mm CNC Dresser Prepped for Internal Grinding BfG Best-Fit Grinding Software High Speed Grinding Steady Rest Onboard Inspection (Profile, Lead, Spacing) Upgraded Inspection for Scanning/Digital Measurement Hydraulic Clamping System Profile & Lead Modifications Double-Helical Grinding Grind from Solid Root Grinding Hydraulic Unit Lubrication System Chiller Specifications: Operating Range: -Maximum Gear Outside Diameter: 1,500 mm -Maximum Stroke Length: 1,500 mm -Maximum Stroke Length of Tailstock: 1,500 mm Dkeb Exmtevggwwsgjl -Minimum/Maximum Center Distance Above Table: 500 - 2,000 mm -Minimum Module: 0.5 -Maximum Pivoting Angle: -45 / +120 Degrees -Maximum Grinding Spindle Drive Power: 38.5 kW -Maximum Grinding Wheel Outside Diameter: 300 mm -Maximum Grinding Wheel Width: 60 -Maximum Stroke Speed: 12,000 mm/min -Minimum/Maximum Workpiece Table Speed: 0 - 30 RPM -Maximum Workpiece Table Load: 8,000 kg -Workpiece Table Diameter: 930 mm -Total Weight, Approximate: 29,000 kg -Space Requirement (width x depth x height): 5,2 x 6,9 x 3.6 m

Condition: good (used), workpiece diameter between centers: 2,286 mm, The No. 61 Angular Hypoid Tester is designed to test large bevel and hypoid gears up to 90" diameter and with shaft angles from 0 - 135 degrees. Spur, helical and internal gears can also be accommodated. The drive or pinion spindle can be rotated in either direction at a recommended spindle speed of 600 RPM. It is mounted in a head which is vertically adjustable on a column, so that the spindle can be offset either above or below the center line of the gear spindle for testing hypoid gears. The pinion head column is adjustable angularly in a horizontal plane to permit testing of gears of any shaft angle from 0 - 135 degrees. Specifications: Centerline of Drive Spindle to Nose of Brake Spindle (90 degrees shaft angle and without face plate): 38-1/2" Max. / 7-5/8" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and without face plate): 60" Max. / 10" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and with 54" face plate): 60" Max. / 28" Min. Centerline of Brake Spindle to Centerline of Drive Spindle (For Spur Gears): 56" Max. / 6" Min. Distance Between Nose of Brake Spindle and Nose of Drive Spindle (for spur gears): 36-1/2" Max. / 0" Min. Offset of Drive Spindle Either Above or Below Centerline of Brake Spindle: 10" Range of Shaft Angles: 0 - 360 Degrees Dkjb Exmtertrzdegsl Maximum Diameter of Gear: 90" Diameter of Face Plate: 54" Outboard Bearing: 3" Diameter Hole Spindles: RPM of Drive Spindle Pulley Set No. 1: 100 - 400 RPM of Drive Spindle Pulley Set No. 2: 250 - 600 Diameter of Taper Hole (large end): 6" Taper Per Foot: 3/4" Depth of Taper: 8" Hole Through Spindle: 5-1/2" Net Weight of Machine: 20,000# Net Weight of Machine W/Outboard Support and Bed Plate: 24,000#

Condition: good (used), Year of construction: 1973, FELLOWS 70-15 GEAR SHAPER - Model 70-15 Fellows heavy duty vertical gear shaping machine , suitable for the manufacture of external straight spur gears up to 70" pitch diameter, as well as internal spur gears and splines within a range of 0" to 88" pitch diameter, regardless of shaper-cutter radius. This unique feature, combined with the machines 15" face-width capacity and 1.7DP cutting capability in steel, provide a formidable platform for producing a wide range of larger geared part members. Equipped with: * Machine Main Base With Work-table, Upper Column, Cutter Ram and Slide of "Super Robust" Construction * Machine with "Saddle Backoff" Method of Cutter Relieving * Cutter Spindle 6.25" diameter w/Standard Straight Spur Guide * Cutter Positioning via Stroke Jog-Button * Rapid Rotation of Work Spindle for Trueing Work-Piece * Rapid Saddle Traverse for Traversing Saddle Relative to Work * Automatic Depth Feed Mechanism for One to Four Cuts, With 4 Speed Motor Providing Speed Change on Finishing Cut * Assorted Work and Feed Change Gears * Assorted Stroke Change Gears * 2" Riser Plate * Main Drive Motor 15HP, 650/220 rpm, 240 Volt 60Hz w/Westinghouse Rectifier Unit for AC * Power Forced Lubrication to Working Elements with "Lubriquip Lub Controller" * Coolant Tank, Pump, and Piping, With Chip Pan * Full Complement of Electrics * Assorted Guards, Covers * 84" T-Slotted Table * Hydraulic System * Work Lamp * Work Platform * Cutter Adaptor * Manuals Specifications: Max. Diameter External Gear Cut (Nominal): 70" Max. Diameter Internal Gear Cut (Nominal): 88" Max. Diameter Workpiece Accommodated: 104" Worktable Diameter: 84" Deb Exsrtrxiomtgjkl Max. Permissible Weight of Workpiece & Fixture: 36,000 Lbs. Max. Distance Workspindle Centerline to Centerline of Cutter Spindle: 35" Min. Distance Workspindle Centerline to Centerline of Cutter Spindle: 0" Max. Work & Fixture Clearance Height w/Cutter Spindle in Upper Position: 28" Max. Diametral Pitch (full length teeth): 2 DP Max. Diametral Pitch (stub teeth): .75 DP Max. Diameter Pitch (30P.A. splines): 2-5/5 DP Diameter of Cutter Spindle: 6.25" Max. Stroke Length: 19.118" Max. Face-Width (nominal): 15" Stroking Speeds (infinitely variable): 5 to 122 S.P.M. Max. Infeed of Cutter Ram: .0020 inch/min. Min. Infeed of Cutter Ram: .0005 inch/min. Max. Rotary Feed Per Stroke (per 1" of cutter diameter): .0068"/Min. Min. Rotary Feed Per Stroke (per 1" of cutter diameter): .0006"/Min. Approximate Machine Dimensions: 192"L x 144"W x 150"H Approximate Machine Weight: 95,000 Lbs.

Year of construction: 1978, Condition: good (used), U.S. MODEL 50TX120 VERTICAL PULL DOWN BROACH Equipped with: Retriever Puller Hydraulic System Coolant System Chiller Chip Conveyor Manuals Specifications: Normal Broaching Capacity: 100,000 Lbs at 922 PSI Peak Force Capacity: 133,600 Lbs at 1350 PSI Main Slide Stroke (Bump Inches): 106 Maximum Cutting Speed: 20 Ft/Min. Maximum Return Speed: 40 Ft/Min. Main Pump Motor: 75 HP at 900 RPM Hydraulic Reservoir: 365 Gallons Handling Pump Motor: 10 HP at 1200 RPM Coolant Pump Motor: 1.5 HP at 1800 RPM Coolant Pump Capacity: 100 Gallons / Min at 23 Head Ft. Coolant Reservoir Capacity: 600 Gallons Approx. Floor Space ( Width x Depth x Height): 65" x 96" x 243" Djb Exmtortrzlsgjkl Net Weight, Approximate: 79,000 #

Condition: good (used), Year of construction: 2000, gear diameter: 449 mm, Equipped with: Fanuc 150MB CNC Control Dry Cutting Cutter Shroud Chip Evacuation System Auto Doors Hydraulic System Lubrication System Work light Stack Light Specifications: Dkob Exjruakgomtgjl Largest Speed Ratio: 10:01 Work Area (Continuous): Largest Depth of Teeth: 15.24 mm Largest Width of Tooth Face: 50.8 mm Work Area Axis: Horizontal Movement X Axis: -114 - 178 mm Vertical Movement Y Axis: -178 - 190 mm Movement of the Carriage Baseplate Z-Axis: -10.16 - 500 mm Workpiece Headstock Swiveling Range B-Axis: -3 - 90 Degree Maximum Distance Machine Center to Spindle Side: 165 mm Number of Teeth: 5-200 Inclusive Max. Gear Pitch Dia. of Typical 35 Deg. Spiral Angle Gear Using Max. Cutter Dia. 12" Cutter at the Following Ratios: Face Milling 1 x 1 - 13.5" - 342.9mm 2 x 1 - 16.0" - 406.4mm 5 x 1 - 17.7" - 450.0mm Face Hobbing (210mm Dia. Cutter) 1 x 1 - 10.560" - 268.22mm 2 x 1 - 10.286" - 275.00mm 5 x 1 - 11.810" - 300.00mm Milling Head Diameter: Helixact: 100,125,169,200,250,320mm Continuous Gumption Procedure, Teichloroethylene: 102 - 210 mm Workpiece Spindle: Drilling of Large Diameters: 5 3/64" Cone Upward Gradient on 304.8 mm (1 Foot): 21/32" Deep One of the Cone: 5.29" Diameter of the Whole Spindle Perforating: 3.35" Speeds: B-Axle Workpiece Headstock Drag Axis: 30 Degrees A-Axle Workpiece Spindle Number of Revolutions: 0 83 min-1 X-Axis Horizontal: 80 mm/sec Y-Axis Vertically: 80 mm/sec Z-Axis Carriage Baseplate: 80 mm/sec Space Requirement L x W x H (Approximate): 4.75 x 3.40 x 2.54m / 188" x 134" x 100" Machine Weight (Approximate): 10980 kg / 24,156#

Condition: good (used), overall weight: 8,500 kg, total length: 3,990 mm, total width: 2,280 mm, total height: 2,500 mm, Year of construction: 2013, INGERSOLL CM SYSTEMS AOHD AGILE OIL HOLE DRILL Equipped with: Siemens 840D Control (2) Drill Heads 20-Tool Rack HSK 50A Taper (2) 7" 3-Jaw Chucks (2) Tailstocks (2) Steady Rests Chip Auger Chip Conveyor Mist Collector Hydraulic System Dob Exmertrx Rstgokl Q R 2 Lube System Air Compressor Specifications: Maximum Length: 1050 mm (41.3") Minimum Length: 180.0 mm (7.1") Maximum Stroke: 250.00 mm Maximum Main Journal Diameter: 115.0 mm (4.5") Maximum Pin Journal Diameter: 100.00 mm (3.9") Maximum Swing Diameter: 250.0 mm (9.84") X-Axis Travel: 1450 mm (57.1") Y-Axis Travel: 150 mm (5.9")W/HSK 50 Z-Axis Travel: 305.0 mm (12.0") A-Axis Travel: 360 Degree B-Axis Travel: 90 Degree Feed Rate (Z): 1 m/min Maxim (40"/min max) Position Accuracy of X,Y,Z Axes: .010 mm (.00039") Position Accuracy of A & B Axes: .03 Degree Position Repeatability of X,Y,Z Axes: .005 mm (.0002") Position Repeatability of A & B Axes: .005 Degree Spindle Power: 5.5 kW (7.5 hp) Spindle Speed: 0-6,900 RPM Tool Adaption: HSK 50E or A Tool Storage (ATC): 20 Total - 10 Per Spindle W/HSK 50 Lubrication - Slides & Ball Screws: Automatic Central Lubricator Approximate Floor Space (LxWxH): 4.0 x 2.3 x 2.5 m (13.1 x 7.5 x 8.2 Ft) Approximate Machine Weight: 8,500 kg (18,740 #)

Condition: good (used), gear diameter: 508 mm, total height: 1,780 mm, total length: 2,990 mm, total width: 2,200 mm, MODEL 610 GLEASON GEAR ROUGHER/FINISHER Equipped with: Hydraulic Workholding Pendant Control Dkob Exmtjrtrykegjl Chip Conveyor Index Plate Geneva Cam Change Gears Hydraulic System Coolant System Manuals Specifications: Maximum Gear Pitch Diameter: 20" Cutter Diameters: 9", 10.5", 12",14",16", 18" Whole Depth: 1.250" Root Angle: 60 to 80 deg. Face Width: 3.0" Extreme Ratio (Minimum): 2.25 to 1 Number of Teeth: 20 to 75 Diameter of Taper Hole at Large End: 3-27/64" Cutter Speeds (Per Minute) for Roughing: 15.6' to 87.7' Feeds (Seconds Per Tooth) for Roughing: 3 to 35 Cutter speeds (Per Minute) for Finishing: 6.8' to 20.5' Feeds (Seconds Per Tooth) for Finishing: 3 to 9 Floor Space: 118" x 86.5" x 70" H Weight: 17,500 lbs.

Condition: excellent (used), Year of construction: 2018, Functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 655 mm, travel distance Z-axis: 750 mm, controller manufacturer: Siemens, controller model: Sinumerik 840 D, workpiece diameter (max.): 700 mm, spindle speed (max.): 18,000 rpm, distance between spindles: 700 mm, number of spindles: 2, number of slots in tool magazine: 80, Two complete and one partial 5-Axis CNC high production flexible machining lines manufactured by Grob are available for negotiated sale. Each line has a Fanuc Robot "load-in" station where the part is introduced to the Grob integrated gantry system. The gantry system has two traveling arms for loading/unloading parts in to the (8) Grob G326 Dual Spindle 5-Axis CNC Machining Centers and (3) Sugino JCC-W6650TE Jet Clean Center CNC Washing and Deburring Machines. Parts are then removed and placed in dunnage by a Fanuc Robot "load-out" station. Line 1 (8) GROB G326 Dual Spindle 5-Axis CNC Horizontal Machining Centers (2018 - 2021): Siemens Sinumerik 840 D CNC Controls, (2) HSK-A63 18,000 rpm Spindles per Machine, (2) 80 Pocket ATC per Machine, Independent Z-Axis, Independent X-Axis, XV-Axis, Spindle/Tool Seating, Spindle No Load Monitoring, Gantry Top Door Loading, 600 mm X-Axis, 655 mm Y-Axis, 750 mm Z-Axis, 700 mm Distance Between Spindles, 2.3 Seconds Chip-to-Chip Time, 1070 kg Max Table Load Spindles Replaced 2022 GROB SPC: Part Handling Transfer Station Dksb Exjv Dydxjmtgsl (2) SUGINO JCC-W6650 CNC Turret Type High Pressure Washing & Deburring Machine (2018): Fanuc Series Oi-MF Control, HP Water Deburring - Variable Up to 7,250 PSI, Sugino OEM Tri-Plex Plunger Pump, 0.08 mm Positioning, Turntable, 6-Tool Turret, 650 mm X-Axis, 500 mm Y-Axis, 500 mm Z-Axis, 48 m/min Rapid Feed, Multiple Filtration Options to 5-10 Microns (1) SUGINO JCC-VCD55SNE CNC Vacuum Dryer (2018): Fanuc Oi-MF Control, 5.5 kW Vacuum Drying Pump, Omron F3SJ Safety Light Curtain, Signal Tower (3-Layers), Ethernet I/P, 4-Axis (X,Y,Z,A), Manual Pulse Generator (2) FANUC Robots: R30iB Controller, Control Pendant, Safety Guarding GROB: Integrated Gantry System Line 2 (8) GROB G326 Dual Spindle 5-Axis CNC Horizontal Machining Centers (2018 - 2021): Siemens Sinumerik 840 D CNC Controls, (2) HSK-A63 18,000 rpm Spindles per Machine, (2) 80 Pocket ATC per Machine, Independent Z-Axis, Independent X-Axis, XV-Axis, Spindle/Tool Seating, Spindle No Load Monitoring, Gantry Top Door Loading, 600 mm X-Axis, 655 mm Y-Axis, 750 mm Z-Axis, 700 mm Distance Between Spindles, 2.3 Seconds Chip-to-Chip Time, 1070 kg Max Table Load GROB SPC: Part Handling Transfer Station (2) SUGINO JCC-W6650 CNC Turret Type High Pressure Washing & Deburring Machine (2018): Fanuc Series Oi-MF Control, HP Water Deburring - Variable Up to 7,250 PSI, Sugino OEM Tri-Plex Plunger Pump, 0.08 mm Positioning, Turntable, 6-Tool Turret, 650 mm X-Axis, 500 mm Y-Axis, 500 mm Z-Axis, 48 m/min Rapid Feed, Multiple Filtration Options to 5-10 Microns (1) SUGINO JCC-VCD55SNE CNC Vacuum Dryer (2018): Fanuc Oi-MF Control, 5.5 kW Vacuum Drying Pump, Omron F3SJ Safety Light Curtain, Signal Tower (3-Layers), Ethernet I/P, 4-Axis (X,Y,Z,A), Manual Pulse Generator (1) FANUC Robot: R30iB Controller, Control Pendant, Safety Guarding GROB: Integrated Gantry System Line 3 (4) GROB G326 Dual Spindle 5-Axis CNC Horizontal Machining Centers (2018 - 2022): Siemens Sinumerik 840 D CNC Controls, (2) HSK-A63 18,000 rpm Spindles per Machine, 80 Pocket ATC, Independent Z-Axis, Independent X-Axis, Spindle/Tool Seating, Spindle No Load Monitoring, Gantry Top Door Loading, 600 mm X-Axis, 655 mm Y-Axis, 750 mm Z-Axis, 700 mm Distance Between Spindles, 2.3 Seconds Chip-to-Chip Time, 1070 kg Max Table Load GROB: Integrated Gantry System