Used Allcat Pt 1865 for sale (53,340)

Year of construction: 1998, Condition: like new (used), double-sided machine for formatting the edge of the workpiece edge banding and finishing of various edge materials from the roll up to 3 mm edge thickness. Use as first machine in a machine line for longitudinal throughfeed. Fixed fence side left, moving side right. basic machine: - with continuous machine column - Glue roller drive at feed stop - Glue container lift at feed stop Dkslqzod A Ud Rjtqmjl - Glue container clamping workpiece actuated. workpiece transport device: - rolling block link chain with ball bearings - chain track with precise, hardened running and guiding surfaces - magnetic motor braking of the transport chain - infeed device with 3 inclined rollers - intermediate transport at the outlet 400 mm long. upper pressure: - with driven V-belt - motorized height adjustable width adjustment: - linear guide as well as rolling guides on hardened supports - motorized rapid/creep drive - ball screws and cardan drives for precise positioning - digital position display paint finish: - Homag textured paint gray RDS 240 80 05 Electrical equipment: - Operating voltage 380/400 V, 50/60 Hz - Control voltage 24 V - control cabinet mounted, installed according to Euronorm EN 60204 - electronic frequency converter with motor brake function - manual switch for setup mode Homatic electronic control NC21 control system Technical data: - Feed infinitely variable 10 - 32 m/min. - Workpiece protrusion fixed 30 mm - workpiece thickness 12 - 40 mm - Working height up to upper edge of chain 950 mm - Working width double-sided min. 240 mm - Working width double-sided max. 1.500 mm - edge material roll 0,3 - 3 mm - Edge cross-section max. - for PVC 135 mm2 - for veneer 100 mm2 - roller diameter max. 900 mm - ground conditions must correspond to the foundation plan Compact double hogger longitudinal 4,5 kW KD10 Free space for subsequent installation of a standard hogging unit controlled 4,5 kW Noise protection Format part Gluing part A3 Noise protection aggregate part basic length Workpiece protrusion adjustment automatic adjustment pressure zone Optimat Edge folding device Cross-cut unit HL81 chamfer/straight free space - 1.050 mm for cross-cut unit pre-milling unit 0,55 kW Free space 350 mm for pre-milling unit Milling unit 0.4 kW Milling unit 0,4 kW chamfer/radii autom. Universal milling unit 4 kW controlled fettling unit profile pneumatic adjustment fettling profile Edge heating white break Electronic width adjustment EB 02 Space requirement: length 6.650 mm x width 5.200 mm Total connected load: 72 kW Rated current: 125 A Total extraction capacity: 18,690 cbm/h Air speed: 35 m/sec. Compressed air consumption: 45 NI/cycle Machine is factory reconditioned, as new, warranty

Condition: good (used), Year of construction: 2010, Article number: 302 0335 Drilling capacity: 34 mm Spindle mount: MK 4 Speed range: up to 6,650 rpm Djlqztsvk Runsqmjkl Thrust: 285 mm Table: 420 x 400 mm Clamping surface: mm Stroke: 160 mm Distance table-spindle nose: 790 mm Total connection: 2.2 kW Accessories/equipment: Condition: good Floor space: 600 x 920 mm Weight: 0.3 t Dimensions: 920 x 600 x 1,930 mm

Condition: good (used), Year of construction: 1992, I sell the automatic optimising saw GreCon Dimter 2004, year 1992. Input table automatic feeding / throughfeed system Outut table Dkjlqztqst Ir Nqsmjl 3 pcs. kickers on left outfeed table Total length: 15,50m Optimising with mistakes deffect reading and automatic cutting sequence modes. Available immediately. Spare parts and Documentation included.

Condition: ready for operation (used), Item condition: Used from stock Manufacturer: Trumpf Warranty in months: 12 Weight: 28.4 kg Storage location: Rosenfeld Storage location: PC12B1 Delqztqjrrhh Uomokl

Year of construction: 2022, Condition: good (used), Machine as good as new. Has a 1D/2D internal reader option. Ask for further details! Dkolqzju E H Ttstqmjl Please note that machine will be sold without warranty and in as-is condition. We always recommend our customer to do a full OEM service prior to installation of the units to production to ensure the maximum efficiency of the machines!

Year of construction: 2023, Condition: as good as new (ex-display), Parker Zander Adsorption Dryer K-MT6 cold regenerated, with multitronic-plus control with pressure dew point control with pre- and post-filter Exhibit: Parker / Zander Adsorption System K-MT6 YOC 2023 Technical data: Compressed air supply: BSPT G 1/2" Flow: 0.93 m³/min at pressure dew point -40°C Other models and designs on request ! Max. pressure 16 bar Min. pressure 5 bar Compressed air inlet temperature: 25° to 50°C Ambient temperature 1.5°C to 50°C Installation site: frost-free indoor installation in a non-aggressive atmosphere. Mains voltage: 230 V , 50-60 Hz Protection Class: IP65 Dimension: Width: 493 mm Depth: 300 mm Height: 1203 mm Dolqztqjm Twwbemskl Weight: 48 kg Visit our shop. We always have a large selection of compressors and dryers in stock.

Condition: like new (used), Min. input length: 500 mm, max. 6 m. Dkelqztqsr A Et Tsmjl Cross section: max. 140 X 250 Motor: 5.5 kW Sawing stroke servo swing arm Feed by means of rollers, 6 pieces top, 6 pieces bottom CNC control Maxi 8.0 1 X sorting unit per 11.5 m Machine is set up according to your wishes

Condition: good (used), Type / Model: UPA5 P50 Mounting: SK40 Setting accuracy: 0.01 mm Accessories: see pictures Equipment: with 2 feeds, rapid return, manual drive Delqztova Dypeqmekl Packaging: Original 365 x 315 x 1700 mm Condition: good Application: Lid FP1, FP2 and similar machines

Condition: good (used), Year of construction: 2019, overall weight: 1,620 kg, total length: 31,280 mm, total width: 15,040 mm, total height: 20,900 mm, input voltage: 220 V, type of input current: AC, Sorting using color and image, Easy setup for different types of materials. With a capacity of up to 2 metric tons per hour, it is the ideal high throughput sorting solution for separating zinc gray metals, copper, brass and circuit boards. Dkolqztqsq Ulw Rjmol The extremely flexible, multi-sensor sorting unit can be programmed to create fractions for wires, seeds and non-metallic materials such as plastics. It offers a high return on investment for mixed waste, electronic scrap and metal recycling. You can see it in operation.

Condition: good (used), Year of construction: 2014, Functionality: fully functional, volume flow: 1,000 m³/h, total width: 1,020 mm, total length: 1,680 mm, total height: 2,460 mm, overall weight: 1,540 kg, operating pressure: 10 bar, input voltage: 400 V, power: 14.2 kW (19.31 HP), 1 heat-regenerating compressed air adsorption dryer. The dryer was in use from 2014 to 2017. The system has been out of operation since 2017. The compressed air came from an oil-free Atlas Copco ZR3 compressor with 132 kW. Manufacturer: Donaldson Filtration Deutschland GmbH Type: HRS 1000 Year of construction: 2014 Volume flow at 7 bar: 1000 m³/h (16.66 m³/min) Connection: DN 80 Installed power: 14.2 kW Dimensions length / width / height: 1680mm / 1020mm / 2460mm Weight: 1540 kg Desiccant bottom (20 cm): 3 mm activated aluminum oxide Desiccant middle (40 cm): 2 mm activated aluminum oxide Top desiccant (rest up to the top) silica gel as a ball. The desiccant is already disassembled and immediately available. The desiccant was sucked out of the container with a vacuum cleaner and packed separately in airtight bags. The desiccant is still in a usable condition. It is not oily or soiled. Djlqsr A El Eeztqmjkl There is the possibility of external re-drying. The TÜV has inspected the inside of the containers and an expert opinion is currently being prepared. "Loose adhesion on the lower part of the dished end" (pictures to follow)

Condition: new, Year of construction: 2013, Functionality: fully functional, Dürr RAM Station Double barrel pump Pumps and dosing concept MPDK X20: Type L10011525 Dolqztqou Eqkvjmekl - Pneumatic gun PVA08/40 - Heatable hose KMHH6007/040 - Electric dosing unit ED150/7 The device is unused!!!

Year of construction: 2023, operating hours: 0 h, Condition: as good as new (ex-display), machine/vehicle number: OFASHL060-40G16AE, Parker Zander adsorption dryer Compressed air preparation system OIL FREE AIR SYSTEM. The OFAS combines sophisticated OIL-X filtration technology with one Optimized drying system to deliver consistently high performance over the long term. The air quality has been externally certified according to ISO 7183 and 8573-1 and meets the requirements of class 0 for the total oil content if required. With dew point control, regeneration air volumes adjustable Exhibit: Parker / Zander adsorption system OFASHL060-40G16AE Year 2019 Technical data: Compressed air connection: BSPT G 1/2 " Flow rate: 1.65 m³ / min at pressure dew point -20 ° C 1.50 m³ / min at a pressure dew point of -40 ° C Dkelqztod Sninoqmel Removes dirt, oil and water up to 0.003 μm Max. Pressure 16 bar Dimension: Width: 559 mm Depth: 490 mm Height: 1510 mm Weight: 93 kg The OFAS system is officially certified by Lloyd to ISO 8573-1 Class 0 in terms of the total oil content of the compressed air from oil-lubricated and oil-free compressors. Other models and designs on request!

Year of construction: 2004, Condition: excellent (used), Dimter optimization crosscut saw 350 with elevation AH 1400 mm crosscut see picture crosscut saw control cabinet Scanner interface sorting 6500 mm long 3 pushers Waste flap Machine is already dismantled and immediately available Machine ran without problems until dismantling Dslqzoncc Icstqmekl Transport can be organized

Condition: excellent (used), Cutting width max. mm: 180 Cutting height max. mm: 90 Blade diameter max. mm: 500 Djlqztsufumrsqmskl Feed speed max. 200 m/min Main motor Kw: 5,5 Control - PAUL MAXI 4.0

Condition: excellent (used), Year of construction: 2017, Optimizer Salvador SuperCut 500 Year of production: 2017 Technical condition: very good Technical data: - Maximum installed power: 11.5 kW Dkslqsuyfx Rjztqmel - Saw motor power: 5.5 kW - Maximum material cross-section: 300x60 - Minimum cross-section of the element: 35x15 mm - Minimum piece length: 1000 mm - Cutting time: 0.1 - 1 s - Feed speed: 0 - 150 m/min - Number of ejectors: 10 Installation and operation training available at extra charge

Condition: good (used), Year of construction: 2003, 1 piece bunker conveyor. Used for wood chips. Dkslqod I H Aieztqmol Volume capacity: 28 m³ Height top edge of hopper currently: 6400mm Height can be reduced to: 5000 mm Hopper length: 4000 mm Hopper width: 4000 mm Hopper height: 3200 mm Hopper sheet thickness: 5 mm Weight: 6000 kg Hopper can be dismantled into 4 parts. Dismantling and loading will be done by us. !!! If required, the conveyor belt can also be purchased !!! Belt width: 800 mm Belt length: 34 meters Drive via drum motor

Condition: excellent (used), OPTIONALLY ALSO AVAILABLE WITH ROOF STRUCTURE! Operating conditions: The trailer is designed for use on level, paved roads in internal traffic. Combined journeys: The trailer components are not designed (without trailer coupling) for combined journeys with several trailers. Payload: 16 t at 6 km/h and uniform loading (surface load) of the loading area between the axles. Point or strip loads are only permitted after notification. Loading area: Size approx. 6000 x 2400 mm, loading height approx. 670 mm, loading area cover with softwood planks, all-round edge protection Steering: Four-wheel Ackermann steering, drawbar can be raised, removed and reversed from front to rear, suspension height on towing vehicle approx. 320 mm (other suspension heights are only permitted after notification), towing eye in accordance with DIN 74054, dm 40 mm, drawbar safety catch in accordance with UVV Chassis: Both axles steered, elastic solid rubber tires approx. 425 x 300 mm, wheel hubs with tapered roller bearings and permanent grease lubrication Paint finish: Top coat RAL 5002 ultramarine blue Dkjlqsuf N Evoztqmol Additional equipment: - 2 lashing rods made of round steel welded vertically into the outer beams on both long sides - Double-acting wheel chock with bracket and chain

Condition: excellent (used), Year of construction: 2007, - Italian production - original Manual + CE - with feeder - sorter Delou R Tb Isqztqmekl - used machine, very good condition The machine underwent a thorough renovation in 2022 The machine works perfectly and does not require any repairs. TECHNICAL DATA diameter of the main saw 500mm diameter of the spindle 35mm max cutting height 70mm max width of the material 210mm min / max length of the material before cutting 500 / 4000mm pneumatic blade extension + diameter of the exhaust port 100mm, 140mm overall dimensions L/W/H 2700x1200x1650mm + control feed table with pulling rollers + 0.37kW engine overall dimensions L/W/H 5100x900x1000mm sorter with 4 pneumatic ejectors +

Year of construction: 2002, Condition: good (used), Min. inlet length: 500 mm, max. 5.5 m. Cross section: max. 85 X 150 Motor: 5,5 kW Sawing stroke servo rocker Feed by rollers, 5 pieces on top, 5 pieces on bottom CNC control Maxi 4.0 Dolobg Svhjqztqmskl 1 X sorting each 11,5 m year of manufacture 2002

Year of construction: 1990, Condition: reconditioned (used), Hydraulic press - has 4 independent stroke / cylinders. Deep drawing process. Manufacturing of oil and fuel filters cans. The range of details is: Sheet thickness: 0.4-0.6 mm Material type - black or galvanized steel Can diameter: 68mm - 96mm Dkolqzjgcvfnotqmsl Can length: 50mm - 180mm The entire control was replaced, including cabling, drivers, monitor, etc.

Condition: new, Year of construction: 2025, Fully automatic cutting of hardened and stainless steels with simple-to-use automation. Put down any steel to cut, the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. Optional fully automatic inline optimiser. Automatic measuring of steel lengths using a laser sensor and on-the-fly job list optimisation against the length measured for minimised wastage in offcuts. Automatic printing of job / part number labels for each part produced (optional). • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Fully adjustable saw cutting and material feeding rates for maximum process productivity. • Automatic optimiser operation with input material laser length measure and auto-optimisation for minimum waste (optional). • Automatic labels printing for parts using data from the job list (manual label application, optional). • In-line direct-to-material printing with no operator action required (optional). Dksloma Ddroqztqmol • Bar codes or QR codes printing or scanning for jobs input (optional). Highly suitable for: • Stainless and hardened steels manufacture • Hydraulic tubing manufacture • Composite / matrix materials manufacture • Carbon fibre manufacture • Fiberglass manufacture Model: S200 Length: 4.5 m Material Length: 3180 mm Pushing capacity: 20 - 40 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.

Condition: excellent (used), OPTIONALLY ALSO AVAILABLE WITH ROOF STRUCTURE! Operating conditions: The trailer is designed for use on level, paved roads in internal traffic. Payload: 6 t at 6 km/h and uniform loading (surface load) of the loading area between the axles. Point or strip loads are only permitted after notification. Base frame: Sturdy welded construction made of sectional steel Loading area: Size approx. 4100 x 2100 mm, load height approx. 560 mm, with screen printing plates Deflectors on the front sides of the frame Steering: Four-wheel Ackermann steering, drawbar can be raised, cannot be repositioned or removed, Drawbar safety device according to UVV Chassis: Both axles steered, wheels with solid rubber tires approx. 425 x 150 mm, wheel hubs with tapered roller bearings and Djlouf N Dfoqztqmskl tapered roller bearings and permanent grease lubrication Paint finish: Top coat RAL 5002 ultramarine blue Miscellaneous: - Collision protection on the frame ends made of drop-shaped half shells. - All-round anti-slip protection approx. 25 mm high - Side underride guard at diagonal bar height - Pin coupling with captive pin, pin spring-loaded Dm 30, on the rear side - Double-acting wheel chock with chain - Two reflectors at the rear - prepared for roof mounting

Condition: refurbished (used), Model 11 completely overhauled Description: CNC cross-cut system Paul MKL or K or KE as desired Manufacturer: Paul Year of manufacture: General overhauled with newest technology Condition: As good as new Technical data: Cutting width 150 mm Cutting height 85 mm Dkolqsb Rl I Hjztqmjl Saw blade diameter:450 mm Saw motor 5,5KW Input length as required CNC Maxi 5 control with optimization Sorting belt as desired Machine would be completely overhauled, all bearings new motors new with latest eff Class, new control, new swingarm.

Condition: new, Year of construction: 2025, Fully automatic cutting of hardened and stainless steels with simple-to-use automation. Put down any steel to cut, the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. Optional fully automatic inline optimiser. Automatic measuring of steel lengths using a laser sensor and on-the-fly job list optimisation against the length measured for minimised wastage in offcuts. Automatic printing of job / part number labels for each part produced (optional). • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. Dslema Ddvoqztqmokl • Simplified part, batch, or large excel lists job cutting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Fully adjustable saw cutting and material feeding rates for maximum process productivity. • Automatic optimiser operation with input material laser length measure and auto-optimisation for minimum waste (optional). • Automatic labels printing for parts using data from the job list (manual label application, optional). • In-line direct-to-material printing with no operator action required (optional). • Bar codes or QR codes printing or scanning for jobs input (optional). Highly suitable for: • Stainless and hardened steels manufacture • Hydraulic tubing manufacture • Composite / matrix materials manufacture • Carbon fibre manufacture • Fiberglass manufacture Model: S200 Length: 6 m Material Length: 4680 mm Pushing capacity: 20 - 40 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.

Condition: new, Year of construction: 2025, Fully automatic cutting of hardened and stainless steels with simple-to-use automation. Put down any steel to cut, the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. Optional fully automatic inline optimiser. Automatic measuring of steel lengths using a laser sensor and on-the-fly job list optimisation against the length measured for minimised wastage in offcuts. Automatic printing of job / part number labels for each part produced (optional). • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Fully adjustable saw cutting and material feeding rates for maximum process productivity. • Automatic optimiser operation with input material laser length measure and auto-optimisation for minimum waste (optional). • Automatic labels printing for parts using data from the job list (manual label application, optional). • In-line direct-to-material printing with no operator action required (optional). • Bar codes or QR codes printing or scanning for jobs input (optional). Highly suitable for: • Stainless and hardened steels manufacture • Hydraulic tubing manufacture • Composite / matrix materials manufacture • Carbon fibre manufacture • Fiberglass manufacture Model: S200 Length: 3 m Material Length: 1680 mm Pushing capacity: 20 - 40 kg Dslqema Dc Ueztqmskl Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.