Used Tabe Agb-40 for sale (21,420)

Condition: excellent (used), Binder Model: MKF 720 E3.1 Temperature and Climate Test Chamber Air-cooled Temperature range: -40°C to +180°C Humidity range: 10% r.h. to 98% r.h. The MKF climate test chamber is a specially developed environmental simulation chamber for industrial material testing and environmental simulation. It offers unmatched performance, significantly exceeding the capabilities of conventional heating chambers. It is suitable for all applications required in material testing, aging, and stress tests. TECHNICAL DATA: Housing dimensions: Width: 1615 mm, Height: 2005 mm, Depth: 1230 mm Rjdpfx Aoymcqdof Uep Internal dimensions: Width: 1200 mm, Height: 1020 mm, Depth: 600 mm Interior volume: 734 liters Net weight (empty): 590 kg Max. total load: 160 kg Max. load per shelf: 40 kg Performance Data, Temperature: Temperature range: -40°C to +180°C Temporal temperature deviation: 0.1...0.5 ± K Spatial temperature deviation: 0.1...1.8 ± K Average heating rate according to IEC 60068-3-5: 4.8 K/min Average cooling rate according to IEC 60068-3-5: 4.8 K/min Max. heat compensation: 6500 W Performance Data, Climate: Temperature range: 10...95°C Humidity range: 10...98% r.h. Temporal temperature deviation depending on setpoint: 0.2...1.5 ± K Max. heat compensation: 1000 W Electrical Data: Nominal voltage: 400V 3N~ ±10% 50Hz Nominal power: 11 kW, 19.2 A Refrigerant: R404A, 5 kg Important notice: 'The table shown in the photos is not included in the sale.' Buyer safety information: The following points are carried out in advance on the chambers we offer: 1. Functional check and replacement of necessary components 2. If required, refilling with regulation-compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Specifications and technical details subject to change and error!) Further questions? Feel free to contact us by phone.

Condition: good (used), Year of construction: 2002, Ref. -No.: 10434 Manufacturer: OKUMA Type: LC 40 Year of construction: 2002 Type of control: CNC Control: FANUC 18-i TB Storage location: Halberstadt Country of origin: Germany Turning Speeds: 10 - 2.800 RPM Bar passage: 91 mm Chuck diameter: 450 mm Tailstock - diameter: 120 mm Redpfjym Na Eox Af Uep Turning Diameter: 550 mm Turning Length: 800 mm Swing Diameter: 800 mm Spindle passage: 90 mm Spindle nose: A2-8 Tailstock Quill Stroke: 150 mm Total Power Requirement: 44 kW Weight Of The Machine Ca.: 8 t Number of tool stations: 12 pc

Condition: ready for operation (used), functionality: fully functional, No reserve price – guaranteed sale to the highest bidder! Bidding obligates the buyer to timely collection either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026! TECHNICAL DETAILS 60 pieces (in various versions, shapes, and sizes) MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1200 x 800 x 300 mm Machine weight: 200 kg EQUIPMENT Redpfx Ajynki Rjf Uep Including lot of collets External reference: Lot 4 / Moog Rekofa

Condition: new, pressure 40 t stroke max. 300 mm bending capacity max. - flat 250 x 16 mm working feed 10 mm/sec Control NC Height of Toolings 250 mm total power requirement 4 kW weight of the machine ca. 1190 kg required space 650 x 1250 x 1300 mm The Gerd Wolff HP 40 is a hydraulic horizontal press machine with many many possible combinations. Whether it is the bending of tubes, the punching of profiles or the cutting of sheet metal - with the right accessories, the HP 40 is a multifunctional machine among the presses. Standard accessories - ergonomic tool clamping table - easy tool change - hydraulic speed and pressure adjustment - easily adjustable back gauge - induction hardened support pins - NC control Redpfx Asymf Nvef Usp Highlights - control panel with digital display - Easy tool change - hardened support pins - hydraulic speed regulation The HP 40 is manufactured for our sales brand "GERD WOLLF Maschinenfabrik", by a renowned manufacturer from Türkiye. The pictures are for orientation only and are not true-to-scale representations of the machine.

Condition: used, Year of construction: 1991, Press Brake Manufacturer: AMADA PROMECAM Model: HFB 125/40 Year of manufacture: 1991 Control: DELEM DA 58 Max. press force: 1,250 kg Max. stroke: 180 mm Sheet thickness: 8 mm Working width/pass-through: 3.7 m Number of phases: 3 Power consumption: 11 kW Voltage/Frequency: 380/50 Rated current: 24 Weight: 9,900 kg Rsdpfox Tzl Isx Af Usp ä25226 Availability: immediate

Year of construction: 2023, condition: ready for operation (used), functionality: fully functional, overall weight: 850 kg, rotational speed (max.): 5,000 rpm, table length: 3,100 mm, table width: 360 mm, machine/vehicle number: KK00034979, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect the item on time, either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS Table dimensions: 3,100 x 360 mm Speed range: 3,500 and 5,000 rpm MACHINE DETAILS Voltage: 400 V Frequency: 50 Hz Dimensions & Weight Dimensions (L x W x H): 4,000 x 4,000 x 1,700 mm Weight: 850 kg EQUIPMENT Digital measuring device up to 2,000 mm Extraction unit Note: The saw can be transported on a standard truck Redpfx Afjynhkxo Usp External reference: Groven - Lot 23

Condition: used, Year of construction: 1998, Surface Grinding Machine Rodpewcym Ajfx Af Usp Manufacturer: Geibel + Hotz Model: FS 40 AC Year of manufacture: 1998 Table length: 400 mm Table width: 200 mm Max. workpiece weight on table: 150 kg Grinding wheel diameter: 225 mm Grinding wheel width: 25 mm Grinding wheel bore: 51 mm Approx. machine weight: 1,050 kg Machine dimensions (LxWxH): 1,800 x 1,200 x 2,250 mm

Condition: used, Year of construction: 2003, Universal CNC machining center Manufacturer: AXA Model: VPC 40 U Year of manufacture: 2003 CNC control: Heidenhain TNC 430 Travel X/Y/Z: 2,300 x 1,200 x 600 mm NC rotary table dimensions: 1,100 x 1,100 mm Fixed table dimensions: 1,100 x 1,100 mm Rjdpewwt Nmjfx Af Uep Tool holder: SK40 Tool magazine: 60 positions Spindle speed: 10,000 rpm Weight: approx. 20 t

Year of construction: 2002, condition: used, offer consists of: - horizontal conveyor ST-40 Horizon ST-40 incl. ST-CV stacker receiving tray + horizontal conveyor - benefit: enable non-stop operation in spite of misfeed- and doublefeedcontrol - dimensions: 1.300x700x950mm Rodpfx Afsymxcpe Uep - weight: 136kg We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

Condition: used, Number of machnines 9 Stk. Wooden window production line for sale on behalf of a customer. Machines still in operation can be viewed. Sale includes machines, tools, and programming of the systems produced. Includes angled window and arched window production. Item 1: Weinig Powermat 500, year of manufacture 2010, window version ----- - 6 spindles, 5 of which are PowerLock - 8,000 rpm - Large PowerCom control system - Spindles 2, 3, and 4 axially CNC-controlled - Spindles 2, 3, 4, and 5 radially CNC-controlled - Window package for glazing bead removal: Pneumatic indexing of right and top spindles for bead removal - Includes existing Leitz planing and beading tools - Linked to a Maweg Saturn Duo single-slice wood sander, year of manufacture 1985 and a workpiece return conveyor Item 2: SCM Windor 40 R window system, year of manufacture 2006 ----- - 2 long CNC-controlled slotting spindles - Optima 16: Drilling units for face and longitudinal drilling - ROTATEN: Angled window attachment - 3 long CNC-controlled profile spindles + top and bottom drilling units - Rebating carriage for small sashes - Workpiece return - Includes Leitz window and door tools - Includes separate OKOMA UF 3 rebating machine with tools Item 3: HOMAG CNC machining center BMG310/42/F/K, year of manufacture 2018 ----- - Gantry machine, 5-axis Drive 5C+ with 15 kW - Ceiling laser - Working dimensions 4200 mm length, 1350 mm depth - 32-position disc changer - 8-position linear changer - Fixed drilling head with 18 spindles V12/H6/S0/90 degrees - 8 consoles - 6 lifting rails - Connection for 8 PowerClamp clamps - Approx. 30 vacuum clamps - 4 x PowerClamp clamps - WoodWop - Chip conveyor belt - Various small solid wood clamps, used for casement windows - Including Leitz tools for Homag with arched window production - Including Barbaric vacuum lifter, year of manufacture 2015 Item 4: Löwer MZP 1 mini dovetail press ----- - ??For arched window production Item 5: S+S frame press type Bavaria 200 L, year of manufacture 2014 Rodpfx Afeyclwxe Uop ----- - Working dimensions 4000 x 2600 mm - With center pressure beam and cross pressure device - Motorized width adjustment - Basic equipment counter profiles - Slanted window control - Pendulum pressure plates + extension for pointed windows - Intermediate insert for small-scale crimping - Various carrier plates for counter profiles and counter profiles Item 6: Striffler sash fitting table ----- - With automatic screwdriver and screw feeder - Fitting rack - Punch for Roto fitting Item 7: Stegherr KF counter milling machine ----- - With existing tools Item 8: Tools ----- All tools belonging to the machines for the wood+wood-aluminum systems IV 72 + 92 mm shown in the PDF - Windows - Lift-and-slide doors - Round and angled windows - Box windows - Entrance doors in many variations - Putty rebate variations - ... Sale of the tools in their current condition, scope, and with accessories as they are currently available. Note regarding window...

Condition: excellent (used), Year of construction: 2013, Used 5-axis CNC machining center Manufacturer: Homag Model: PROFI BMG 511/40/15/F/K Year of manufacture: 2013 5-axis spindle 15 kW, Drive5C+ MPU drilling head with 30 spindles, 360° Vertical drilling spindles: 20 Horizontal drilling spindles: 10 Additional routing spindle: 6 kW Speed Pack 18-position disc tool changer D=130 below PickUP station for saw blade 350 mm Tool transfer station Workpiece length: All units: Single 4,000 mm, pendulum 2,250 mm, min. 500 mm Tool diameter 25 mm: Single 4,175 mm, pendulum 2,250 mm, min. 500 mm Workpiece width: Rear stop: 1,900 mm Front stop, all units: 1,450 mm; with tool diameter 25 mm: 1,675 mm – Workpiece thickness: – Max. 300 mm including clamping devices – Up to 60 mm with standard clamps Console table with 10 movable consoles, each with 2 suction cups, side and longitudinal stops, LED position display for vacuum suction cups 14* for laminate overhang; 10 extraction rails, connection for Power-Clamp, vacuum connection for templates SAFETY AND PROTECTIVE DEVICES: CE Compliant; SAFETY FENCING ON THE RIGHT WITH DOOR Equipment: DRILLING HEAD 30 SPINDLES: V20 / H10/ S360° “MPU” 10 HORIZONTAL SPINDLES GROOVING AND SEPARATING SAW ADDITIONAL ROUTING SPINDLE 6 KW FOR MPU DRILLING HEAD DRILLING/MILLING UNIT 4-SPINDLE FOR TOOL CHANGER MACHINING SPINDLE 15 KW DRIVE5C+ AGGREGATE INTERFACE DRIVE5C+ TOOL MEASURING PROBE FOR TOOL CHANGER SOFTWARE FOR POSITION MEASUREMENT & CNC AXIS ROTATION TOOL TRANSFER STATION 18-POSITION DISC TOOL CHANGER D=130 BELOW PICKUP STATION FOR 350 MM SAW BLADE FOR DRIVE5(C)+ COOLANT TANK FOR MACHINING SPINDLE Redpfxjym Am Sj Af Ujp VACUUM PUMP 300/360 M³/H Control: POWERCONTROL PC85 WITH POWERTOUCH CONTROL SYSTEM; IPC POWERPACK, OPERATOR CONSOLE FOR PROGRAM START; CAMERA SYSTEM WITH TABLET PC WOODWOP CAD/CAM INTERFACE STANDARD DOCUMENTATION AND CONTROL TEXTS: GERMAN Delivery includes only the depicted tools and HSK holders!

Condition: excellent (used), CTS Model: CTS CW+40/7/7 Walk-In Climate Chamber CTS Walk-In Climate Chamber 7 m³ Temperature & Humidity Testing 40–90°C Description: Rodpfxsylmamo Af Uep For sale is a walk-in climate-temperature test cell, CTS CW+40/7/7, industrial design. This system is used to simulate defined temperature and climate conditions for testing materials, assemblies, and technical systems under realistic environmental conditions. Temperature and humidity can be precisely controlled, and both constant and programmed test cycles are possible. High air circulation ensures uniform climate distribution throughout the entire test area. The walk-in construction enables testing of large components or complete systems. Technical data: Manufacturer: CTS – Clima Temperatur Systeme Model: CW+40/7/7 Serial number: 113011 Year of manufacture: 06 / 2011 Design: Walk-in climate test cell Test volume: 2 × 7 m³ Electrical data: Power supply: 400 V / 3N / 50 Hz Rated power: 29.6 kW Rated current: 45.8 A Climatic data: Temperature range: +40 °C to +90 °C Humidity range: 10 % to 90 % RH Dew point range: +30 °C to +87 °C Protection rating: IP44 Internal dimensions: Width: 1400 mm, Depth: 1300 mm, Height: 2250 mm Overall external dimensions: Width: 3511 mm, Depth: 2765 mm, Height: approx. 2515 mm (overall) Additional technical data: Sound pressure level: 56 dB(A) Cooling: Water-cooled Heating: Stainless steel heating elements Internal chamber: Stainless steel Exterior: Coated steel panels (RAL 9010) Air circulation: Radial fan Control: 32-bit controller with LCD Interfaces: RS-232 / RS-485 Program and cycle mode available Safety temperature limiter & emergency stop available Refrigerant: R404A Weight: approx. 2000 kg Condition: used Scope of delivery: (see image) (Specifications subject to change and error!) We are happy to answer further questions by phone.

Condition: used, Technical data for the shelf panel: Shelving system: Meta Type: Clip Included in delivery: 01x Shelf panel, used Panel designation: MS150-III Material finish: Sendzimir galvanized Dimensions: 1,000 x 600 x 40 mm Weight: 3.93 kg|pc. Max. load per shelf panel: 150 kg with evenly distributed load Your contacts at our company: Rodpfxoyk T E To Af Ujp Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information on the item: This item is only available for collection. If transportation or shipping of this item is required, additional costs will apply. These costs can be queried separately with us depending on the delivery location and the scope of delivery.

Condition: new, Technical data for shelf panel: Shelving system: Meta Type: Clip Scope of delivery: 01x shelf panel, used Panel designation: MS150-III Redpfx Afeyk R Rms Usp Material colour: Sendzimir galvanized Dimensions: 1,300 x 600 x 40 mm Weight: 5.11 kg/unit Maximum load per shelf panel: 150 kg with evenly distributed load Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. If transport or shipping of this item is required, additional costs will apply. These can be requested from us individually, depending on delivery location and scope.

Condition: excellent (used), Catalogue number 7736 TECHNICAL DATA - shaft width: 410mm - number of knives: 4 - noise-damping comb at the shaft - table length: 2530mm - brake - cast iron tables - both tables adjustable - original, angle-adjustable guide - motor: 3kW - extraction port diameter: 140mm - dimensions L/W/H: 2530x850x1350mm - weight: 680kg ADVANTAGES – manufactured in Poland – 4-knife shaft – brake – upper control panel Rodoymntkopfx Af Uep – noise-damping comb at the shaft – DTR documentation – used jointer, in very good condition Net price: 12,900 PLN Net price: 3,070 EUR depending on 4.2 EUR rate (Prices may vary with significant exchange rate fluctuations)

Condition: excellent (used), Catalogue number 7834 TECHNICAL DATA - Maximum diameter of main blade without scoring unit: 400mm - Maximum blade diameter with scoring unit: 350mm - Maximum cutting height for 350mm blade: 100mm - Main blade adjustable up/down and tiltable - Large blade guard - Spindle diameter: 30mm - With sliding table - Cutting length on sliding table: 1400mm - Cutting width at fence: 1180mm - With side table - Fence on side table adjustable at an angle - With scoring unit - Maximum scoring blade diameter: 120mm - Spindle diameter: 20mm Redpsymnmqofx Af Uep - Main blade motor power: 4kW - Scoring unit motor: 0.75kW - 2 rotation speed settings - Table dimensions: 1120x1020mm - Table dimensions with extension: 1820x1720mm - Extraction nozzle diameter: 130mm - Dimensions L/W/H: 3650x2150x1450mm - Weight: 720kg ADVANTAGES – Made in Poland – With scoring unit – DTR technical documentation – Used saw, in very good condition Net price: 11,900 PLN Net price: 2,840 EUR (depending on the rate 4.2 EUR) (Prices may vary with significant rate fluctuations)

Year of construction: 1997, condition: used, functionality: fully functional, load capacity: 45,000 kg, 20/40‘ Hydraulic Spreader Condition: Ready for use and fully functional Technical Condition: very good Rjdpewpm E Sjfx Af Usp Description: In addition to this ELME model, we have about 200 heavy-duty forklifts, compact forklifts, forklifts & side loaders in our warehouses in Hamburg and Gdansk. Visit our homepage - sago-online. Hire purchase & financing on favorable terms are always possible for us. We are also happy to buy your used equipment outright, even if you do not purchase a vehicle from us. Our owner Mr. Peter Sawitzki will be happy to advise you in detail about this CH 20-40. P.S.: Our master forklift workshop specializes in repair, restoration, overhaul, and custom-built forklifts from 8 tons upwards. We are also happy to put your vehicle on sale for you on commission at our place.

Condition: used, axle configuration: 2 axles, first registration: 10/2010, suspension: air, tire size: 385/55R22,5, wheelbase: 11,280 mm, color: other, Year of construction: 2010, Equipment: ABS, = Additional Options and Accessories = - EBS = Remarks = Number of axles: 2, Payload: 30,320 kg, Unladen weight: 11,680 kg, Gross weight: 42,000 kg, Suspension type: Full air, ABS, EBS, Year of body construction: 2010, Axle type: BPW = Further Information = General Information Cab: Day Registration number: OL-69-DV Drivetrain Fuel type: Diesel Transmission Gearbox: Manual transmission Axle Configuration Tyre size: 385/55R22.5 Brakes: Drum brakes Suspension: Air suspension Axle 1: Tyre tread left: 4 mm; Tyre tread right: 5 mm Axle 2: Steered; Tyre tread left: 4 mm; Tyre tread right: 4 mm Weights Unladen weight: 11,680 kg Payload: 30,320 kg Rodpsw Da A Hsfx Af Usp Gross vehicle weight (GVW): 42,000 kg Environment Emission class: Euro 0 Condition Overall condition: Fair Technical condition: Fair Optical condition: Fair Damage: None = Company Information = Kleyn Trucks is one of the world’s largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our offer includes all European makes, model years, and price ranges. Why buy from Kleyn Trucks? Simple! • Large, fast-changing inventory • Reliable, recognizable quality • Competitive prices • Trustworthy business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration plates arranged promptly • Expert technical services • The security of ‘recognizable quality’ • And more.... Please visit our website for special offers and a complete stock list. Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send us an inquiry via our website. Ask directly about our European warranty package.

Condition: used, Year of construction: 2016, total width: 840 mm, total length: 1,530 mm, total height: 1,730 mm, Empty weight: 350 kg Price: On request SK50 Tool presetter X-axis: 200mm Z-axis: 400mm Precision: 0,002 mm Max workpiece weight: 200kg - Year: 2016 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 99580013018 - Control: CNC - Transport dimensions: 1530mm x 840mm x 1735mm (l x w x h) - Transport weight [kg]: 350kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum Rjdpoyk E Igofx Af Usp

Condition: as good as new (ex-display), Year of construction: 2021, bore capacity in steel (diameter) 40 mm arm length 370 - 950 mm workpiece height max. -- mm turning speeds 50 - 316 / 316 - 2000 U/min spindle taper MK 4 tread diameter max. M30 boring head -90° bis +90° schwenkbar quill stroke 200 mm feed (6) 0,08 - 0,50 mm/U distance spindle /table 390 - 780 mm T-slots 18 mm column diameter 220 mm total power requirement 2,2 kW weight of the machine ca. 2,8 t dimensions of the machine ca. 2,45 x 1,2 x 2,72 m Very good condition * Electromotive height adjustment of the drill head without adjustment the drilling position, ideal for deep hole drilling * Drill head can be swiveled 180°, boom can be moved back and forth and horizontally pivotable * Thread cutting device and 6 automatic drilling feeds * Large table surface (1195 x 500 mm) for simultaneous clamping several workpieces * Digital speed and drilling depth display * Quickly adjust the drill head to the workpiece and clamp it hydraulic * with electronically stepless speed control * User-friendly operation via membrane keyboard Scope of delivery: Thread cutting device LED machine light Coolant device Height-adjustable protective cover Electromagnetic spindle feed Digital speed display Rodpfxoxwdvbe Af Ujp Digital drilling depth display Electromotive drill head adjustment

Condition: used, Screw compressor WORTHINGTON - CREYSSENSAC Type Rollair 40 -- RLR 40BM6 Serial no. 6240330200 Year of construction 2003 Volume flow 4.6 m3/min. Pressure capacity 10 bar Motor power main motor 30 kW Mains connection 400 Volt, 50 Hz Connection thread 1 1/2 inch Rsdpfx Ajfmim Uef Usp - 36004 Switch-on hours read - 19256 Load hours read - Soundproofed Space requirement L x W x H 1850 x 1050 x 1760 mm Weight 910 kg good condition

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 10800 € 207.36 € 35 mm 137 mm 137 mm 3 1.1 kW 7 m/min 35x8 mm / 300 mm Rodpfxoynnhko Af Uep 50x12 mm / 400 mm 18x18 mm / 250 mm Ø 22 mm / 200 mm Ø 40x1,5 mm / 500 mm 30x15x2,5 mm / 500 mm 25x25x2 mm / 450 mm 35x35x5 mm / 400 mm 30x30x4 mm / 550 mm 1050 mm 500 mm 1250 mm 350 kg 3 mech. driven rolls (brake motor) hardened and ground shafts lower rolls hydraulic adjustable horizontal and vertical operation standard set of rolls foot pedal forfor- and backward drive 2 digital readouts control panel machine and equipment accordingto the CE regulations user manual in GERMAN and ENGLISH WE HAVE MORE THAN 210 REFERENCES!

Condition: new, neu ca. 4 Monate ab Auftragse Italien 22900 € 439.68 € 40 to 500 mm 700x500 mm 600 mm 26 mm/s 9 mm/s 4 kW 1400 mm 900 mm 2200 mm 1300 kg Rjdpfxeynndxe Af Usp 2 speeds adjustable max. pressure manomete

Condition: new, neu ca. 4 Monate ab Auftragse Italien 35400 € 676.14 € 40 to 500 mm 700x350 mm 700x500 mm 500 mm 250 mm 26 mm/s 9 mm/s 4 kW 1500 mm 1000 mm 2500 mm 1500 kg 2-fold round guidance table and ram with T-slots 2 hand operation Siemens PLC manometer users manual 4-fold round guidings € 1.900,- Light barrier € 7.300,- Siemens control for programming of stroke and press time Rsdpjynm Hrsfx Af Ujp € 4.000,- Siemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota • Break time in the bottom • time of Decompression • setting pressure of work • Pieces counter • prestop in upstroke and downstroke • setting for movement in manual and in automatic • management of alarms and anomalies € 9.000,- Stroke counter € 400,- Decompression valve € 700,- Oil cooler with decompreission valve € 3.700,- Pressure switch € 900,-

Condition: used, Plasma cutter CLOOS type CPS 40/80 Year of manufacture 1990 Power at 60 % ED 80 Amp. Power at 100 % ED 40 Amp. Adjustment range 40 and 80 Amp (2 steps) cutting capacity with steel max. 25 mm Hose package length 5.5 meters Redjdzqccjpfx Af Uop Mains connection 400 Volt with 32 Amp. Plug - Hand torch CLOOS dimension L x W x H 700 x 600 x 750 mm weight 160 kg good condition