Used Tabe Agb-575 for sale (342)

Condition: used, mileage: 157,658 km, power: 346 kW (470.43 HP), first registration: 03/2023, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 08/2027, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), Retarder, fifth wheel height 1160 mm, 85 km/h!!! Air conditioning, Climatronic, auxiliary water heater, 4 kW, MAN radio with SD card, 7 inches, MAN sound system, 2-circuit tipping hydraulics, high and low pressure, JOST JSK 37 C 2-inch fifth wheel coupling, 150 mm coupling height, 575 mm fifth wheel center distance from the center of the last axle, hydraulic tank 181 liters, connections converted to HYVA system (07/23). Iodpfx Ahjzwi Aye Uoig

Condition: new, empty load weight: 116 kg, maximum load weight: 634 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 2,006 mm, loading space width: 1,063 mm, loading space height: 320 mm, loading space volume: 0.9 m³, tire size: 155/70 r13, wheelbase: 1,499 mm, color: grey, Year of construction: 2024, Equipment: trailer coupling, SHIPPING ONLY! UT004045 Car trailer Garden Trailer 200 TILT with a tilting drawbar and a maximum permissible total weight of 750 kg. If you want to buy a new car trailer in our shop, you don’t have to worry about documents. The car trailer Garden Trailer 200 TILT is supplied with a tarpaulin in gray, a bow bar and a support wheel. The tarpaulin with the bow bar protects transported goods from rain, snow, wind and sun. This set includes: sturdy bow, waterproof tarpaulin and a round button for attaching the elastic cord. The frame of the trailer with additional cross members represents a very solid construction compared to other trailers. All trailer parts have been galvanized, which provides precise corrosion protection. The twisted design enables a very low total weight and thus a high load capacity. During the ordering process, please enter the desired permissible total weight of the trailer in the field "Notes for the shop" (as indicated in the vehicle registration document for light trailers). If you have any further questions, please contact us via online chat or telephone. When ordering a car trailer, please specify the permissible total weight of the vehicle that will tow the trailer. You can find the information on the permissible total weight on the last page of the vehicle registration document. Possible permissible total weight values: 300 kg, 350 kg, 400 kg, 450 kg, 499 kg, 500 kg, 525 kg, 550 kg, 575 kg, 600 kg, 625 kg, 650 kg, 675 kg, 700 kg, 725 kg, 750 kg. Iedpfx Ahjir H Rle Uoig Shipping costs will be charged separately.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, workpiece length (max.): 4,600 mm, workpiece width (max.): 2,200 mm, workpiece height (max.): 250 mm, Equipment: rotational speed infinitely variable, Holz-Her 5-Axis CNC Nesting Machining Center DYNESTIC 7535 Working area: 4600 x 2200 mm. Vector speed is 128.0 m/min. The milling spindle has a power output of 13.0 kW (S6) and accommodates tools with a maximum diameter of 350 mm via HSK interface. Drilling unit with 24 spindles – 18 vertical and 6 horizontal. The maximum drilling diameter is 35 mm. For grooving, the drilling head is equipped with an integrated saw unit for blades with a maximum diameter of 125 mm and a maximum width of 4 mm. 18-position disc tool changer, pneumatically liftable and covered to protect the HSK 63F holders, as well as a single-position pick-up changer for saw blades up to 350 mm in diameter. Pneumatically retractable stops in the table for special machining either on the nesting table or using vacuum pods. Vacuum capacity of 750 m³/h, distributed across 2 pumps with 500 m³/h and 250 m³/h respectively, intelligently controlled by ECO-VAC software. To optimize vacuum efficiency, the table features a 16-zone vacuum system. The pre-installed pusher unit is connected to the extraction system and can be used for panel cleaning and/or clearing the nesting table. Delivery, installation, and machine commissioning training available directly through us at additional cost. Ijdpfjx E Ah Iox Ah Ueig The machine is currently located at our shipping warehouse in Gratwein, Austria. In case of discrepancies between the German version and any foreign language version, the German version shall prevail. Our general terms and conditions can be found on our website at holzher.de/de/agb.

Condition: used, Year of construction: 2015, functionality: fully functional, workpiece height (max.): 60 mm, total length: 7,920 mm, warranty duration: 3 months, HOLZ-HER Edge Banding Machine ACCURA 1556 premium with intelligent equipment package for edge thicknesses up to 15 mm. Easy program changes and tool adjustments via the 18.5" touch control panel. Short heating time of the GlueJet adhesive system, approximately 2 to 3 minutes depending on adhesive type and ambient temperature. Always fresh glue thanks to the GlueJet adhesive application system and glue cartridges. Changing PUR glue and cleaning the system is extremely simple and can be done in just a few minutes. Axis adjustment via high-precision, repeatable servo motors. Special features for materials with protective foil, such as high-gloss and supermatt surfaces! One of the absolute highlights of this machine is the multifunction package, which excels in operations with many different edge types. The DIA tools are multi-stage and can switch between radii and bevels as the situation demands – from the longitudinal milling unit to corner copying and profile scraper. The extendable workpiece support and extended infeed section help with large workpieces, and a guiding system assists in feeding small workpieces into the machine. Edge thickness (coil material): 0.4 – 3 mm (depending on material) Edge thickness (strip material): 0.4 – 15 mm Workpiece thickness: 8 – 60 mm Workpiece width: min. 65 mm Feed speed: 10 – 25 m/min Glue application via GlueJet, suitable for both EVA and PUR adhesives, with minimal effort. Handles all popular edge types, including high-gloss & supermatt, as well as solid wood edges up to 15 mm. iTronic – pressure and glue amount control Prepared for connection to a RETURN system Motorized pressure bridge with top belt drive Multifunction units for quick setup of radius, flush, bevel Vertical & horizontal spray units and much more. Iedpox Emf Defx Ah Uoig Delivery, installation, and machine commissioning can be arranged directly through us at an additional cost. The machine is currently located in our delivery warehouse in Gratwein, Austria. In the event of discrepancies between the German version and any foreign-language version, only the German version is binding. Our general terms and conditions can be found on our website at holzher.de/de/agb.

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, HOLZ-HER Edgebanding Machine ARTEA 1030 - TRADE SHOW MACHINE Edge thickness, coil material: 0.4 – 3 mm (depending on the material) Edge thickness, strip material: 0.4 – 5 mm Workpiece thickness: 8 – 50 mm Workpiece width: min. 70 mm Workpiece length: min. 180 / 210 mm Feed speed: 9 m/min. Glue application via Teflon-coated glue application roller, with glue reservoir located underneath. All common edge types, including solid wood edges up to 5 mm. Equipment: - Edge Control BC 15 control system with 15.6'' touchscreen - Vi.Se (Visual Setting Mode) - Nesting & Pneumatics Package - LED machine lighting Iisdpfx Ahjzg Axte Ujg - Joint milling - Edge feeder - LR101 gluing system - glue application roller (Teflon-coated) - Pressing unit - Trimming unit - Milling unit with r = 2 mm tools - Profile milling unit - Scraping unit - Pneumatic surface scraper - Buffing unit - Spray device in the infeed and outfeed areas 12 months warranty Delivery, installation, and machine instruction can be arranged directly through us for an additional fee. The machine is currently located in our delivery warehouse in Gratwein / Austria. In the event of discrepancies between the German version and a foreign language version, only the German version shall prevail. Our general terms and conditions can be found on our website at holzher.de/de/agb.

Condition: new, Year of construction: 2026, functionality: fully functional, HOLZ-HER edge banding machine ARTEA 1030 - NEW MACHINE Edge thickness, roll material: 0.4 – 3 mm (depending on the material) Edge thickness, strip material: 0.4 – 5 mm Workpiece thickness: 8 – 50 mm Workpiece width: min. 70 mm Workpiece length: min. 180 / 210 mm Feed rate: 9 m/min. Glue application in PUR & EVA qualities, easily achieved thanks to the HOLZ-HER GluJet adhesive application system. All common edge types, including solid wood edges up to 5 mm. Equipment: - Edge Control BC 15 control system with 15.6'' touchscreen - Vi.Se (Visual Setting Mode) - Nesting & Pneumatics Package - LED machine lighting - Joint milling cutters - Edge feeder - GluJet GJ201 adhesive application system - Material buffer - Glue collecting container - Automatic reloading function - Pressure unit - Trimming unit - Milling unit with r = 2 mm tools - Profile milling unit - Scraper unit - Pneumatic surface scraper Iiedpfx Ajzgu Dnoh Ujg - Buffing unit - Spray system in the infeed and outfeed area 12 months warranty Delivery, installation, and training for the machine can be arranged directly through us for an additional charge. The machine is currently located in our delivery warehouse in Gratwein / Austria. In the event of discrepancies between the German version and a foreign language version, only the German version shall prevail. Our general terms and conditions can be found on our website at holzher.de/de/agb.

Condition: excellent (used), Year of construction: 2023, workpiece height (max.): 60 mm, edge thickness (max.): 15 mm, Holz-Her Edgebander LUMINA 1380 Multi PUR & EVA glue application (up to 60mm) + NIR unit / laser edging up to 45mm, as exchangeable station Jointing milling unit Isdpfxsx E A Dij Ah Uoig IntelliSet - tool correction fa.s.t. - Set-up on the fly iTronic - pressure & glue quantity control Fully motorized configuration of all units Multi-function milling units - 1.3mm radius (double) & 2mm (double) Spraying units and much more... The machine is currently being refurbished at the factory in Voitsberg, Austria. Delivery, installation, and commissioning can be arranged directly through us at additional cost. The machine is currently located in our distribution warehouse in Gratwein, Austria. In the event of discrepancies between the German and a foreign language version, only the German version is binding. Our Terms and Conditions can be found on our website at holzher.de/de/agb.

Condition: used, maximum load weight: 24,140 kg, overall weight: 32,000 kg, axle configuration: 2 axles, first registration: 02/2018, Equipment: ABS, Göbel System Trailer, Roller Bed, AIRCARGO * Roller bed, AIRCARGO Iisdezv A Ugjpfx Ah Ueg * Disc brakes * Twin-axle, twin-tire configuration * Air suspension * Air control system * Load support at the rear, pneumatically closable * Sliding tarpaulin, right and left * Sliding cover * Hydraulic lifting roof in the center * LED lighting * SAF axles * Tires: 245/70 R19.5 * Disc brakes * Stainless steel toolboxes, right and left * Tie-down points, recessed on the right and left sides of the frame Subject to prior sale and errors. Sale exclusively subject to our General Terms and Conditions (AGB). Important Note – Important Information: Despite careful review of all details in our offer, errors may occur. Some of these are caused by transmission errors in the systems of the various platform providers. Therefore, we would like to point out that all information is provided without guarantee and does not constitute a legal claim. Legal: This sales advertisement does not constitute an offer within the meaning of §145 of the German Civil Code (BGB). Rather, it provides information for the initiation of a contract. The information provided here is without guarantee and therefore does not constitute guaranteed characteristics.

Condition: excellent (used), Year of construction: 2002, Arburg 320S 350-150 (2002) Clamping force: 35 ton Plate size: 455x455 mm Tie bar distance: 320x320 mm Iedpfx Ahowmqx Ro Uoig Min-Max daylight : 575 mm Screw dia: 30mm (up to 30%glass resistant)

Condition: excellent (used), Year of construction: 2015, year of last overhaul: 2025, Demag Systec 210-840 (2015) SERVO Manufacturer: Sumitomo SHI DEMAG Type of machine: Systec 210/580-840 Iisdjzbg Ezspfx Ah Uog Clamping force [kN]: 2100 Shot volume [cm³]: 358 Clearance between tie bars hor. [mm]: 580 Clearance between tie bars vert. [mm]: 580 Mold height min. [mm]: 340 Mold height max. [mm]: 690 Opening stroke max. [mm]: 575 Daylight max. [mm]: 1365 Year of manufacture: 2015 Machine dimensions L/W/H [mm]: 6022 / 1556 / 2090 Control unit and software version: NC3 Max. weight of entire molding tool [kg]: 3300 Screw diameter [mm]: 45 Screw design: 3 zone Screw relation (length/diameter): 20:1 Screw back flow valve: Yes Ejector system type: Hydraulic Installed heating power [kW]: 39 No. of integrated hot runner circuits: 12 Number of temperature control electrical valves: 28 Number of cascade controls: 2 Connection to central drying system: Yes Unloading robot system available: Yes Number of tempering units: 3 Tempering units max. temperature [°C]: 160 Machine oil capacity [l]: 400 Net power of hydraulic pump engine [kW]: 26

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 142967, turning diameter over cross slide: 300 mm, spindle speed (max.): 5,000 rpm, rapid traverse X-axis: 30 m/min, feed rate X-axis: 5 m/min, controller model: Mazatrol PC Fusion CNC 640T, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working area Maximum turning diameter: 300 mm Maximum swing diameter: 525 mm Maximum swing diameter over the slide: 350 mm Maximum bar diameter: 51 mm Ijdpfx Ahozpxgxs Uoig Main spindle Speed range: 35 – 4,000 rpm Drive power: 15 kW Maximum torque: 350 Nm Spindle nose: A2-6 Spindle bore: 61 mm C-axis positioning: 0–360° / 0.001° Counter spindle Speed range: 35 – 5,000 rpm Drive power: 7.5 kW Maximum torque: 57 Nm Indexing: 72 positions / 5° Tool turret Number of tool stations: 12 Equipment: Stationary and driven tools Turret indexing time to station 1: approx. 0.2 s Driven tools Drive power: 3.7 kW Maximum torque: 35 Nm Speed range: 25–4,500 rpm Travel ranges X-axis travel: 190 mm Z-axis travel: 575 mm B-axis travel: 585 mm Rapid traverse rates Rapid traverse X-axis: 30 m/min Rapid traverse Z-axis: 30 m/min Rapid traverse B-axis: 18 m/min Feed ranges Feed X-/Z-axis: 0–5,000 mm/min Feed C-axis: 1–2,000 rpm MACHINE DETAILS Control system: Mazatrol PC Fusion CNC 640T EQUIPMENT Counter spindle Bar feeder

Condition: good (used), Year of construction: 2018, functionality: fully functional, cooling capacity: 54.3 kW (73.83 HP), type of input current: three-phase, type of cooling: air, overall weight: 575 kg, input voltage: 400 V, total width: 1,210 mm, total length: 1,410 mm, total height: 2,400 mm, warranty duration: 6 months, heating capacity: 45.6 kW (62.00 HP), Aircooled chiller/Heat pump BLUEBOX GEYSER 2 MT 52 54.3 kW / 45.6 kW Cooling capacity: 54.3 kW / 15.44 tons (12/7 — 35°C) Heating capacity: 45.6 kW / 12.97 tons (40/45 —7°C) Year of manufacture: 2018 Options: Heat pump. Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 2 pcs. Copeland ZP91KCE-TFD-422 (scroll) Type of refrigerant: R410а Number of fans: 1 pcs. (Frequency inverter) Dimensions: 1.41х1.21х2.4 m Weight: 575 kg Working hours: 26200/28300 h. Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. Iedpfx Aheyt H S Ej Uoig WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, *AVAILABLE IMMEDIATELY* Includes: E & emergency hand pump, full steel floor Equipment: - 18 lashing points - Battery charger - Electric pump Net price: €8,277.31 / Gross price: €9,850.00 Article number: UDK235422011.01 Technical data: • Brand: Unsinn • Model: UDK 4220-35-14 • Vehicle type: Three-way tipper • Vehicle condition: New vehicle • First registration: without first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (L x W x H): 426 x 204 x 35 cm • External dimensions (L x W x H): 575 x 221 x 120 cm • Loading height of the floor: 78 cm • Permissible total weight: 3,500 kg • Unladen weight: 1,140 kg • Payload: 2,360 kg • Chassis: Low loader (wheels under the body) • Tires: 185R14C • Suspension: ALKO rubber suspension axle • Support wheel: Yes, automatic, 500 kg • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Unique, torsion-resistant longitudinal frame chassis for safe driving characteristics • Aluminum side walls, anodized, double-walled • All side walls can be folded down and removed • Steel corner posts removable • Rear flap can also be pivoted • Attachment option at all 4 corners for tarpaulin frames, grille attachments, side wall attachments or front wall extension • Sturdy toggle lever locks • Full steel floor, 3 mm hot-dip galvanized - extremely robust • Drawbar and frame, hollow profile construction welded together and completely hot-dip galvanized • Many cross members, resulting in high point load capacity • All cross and longitudinal members rest on the ground • 18 lashing eyes countersunk in the steel floor, (symmetrically distributed), with pot magnet (1,500 DaN/kg) • U-profile on the rear, for easier placement of the ramps • Ramp compartment • Solid 4-stage hydraulic cylinder • Electric hydraulic pump with battery (12V/75AH) in the box incl. cover • Emergency pump, manual, incl. socket insert, for tipping by hand when the battery is empty • Removable remote control for E-hydraulics • Integrated battery charger with Schuko plug • Maintenance-free rubber suspension axles from ALKO • Reverse drive automatic • ALKO overrunning device and parking brake • 13-pin connector • Reversing light • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Reinforced, automatic support wheel, for safe parking of the loaded trailer, load capacity 500 kg • Premium jockey wheel with ratchet strap roller _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to request any special requirements! _____ Iijdpozugh Ujfx Ah Usg - Financing or leasing possible - Delivery throughout Germany possible - All prices include VAT - Vehicle registration document can be sent in advance or transit plates (Germany) can be provided. - Export license plates incl. customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers available for you immediately! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - authorized dealer & repair workshop for over 30 years. - Errors, omissions and prior sale excepted -

Condition: used, mileage: 291,100 km, power: 375 kW (509.86 HP), first registration: 07/2022, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 09/2027, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), Standard drive line extended warranty for the 3rd year of operation, up to 450,000 km. Tachograph 4.1, safety package, interior lighting package, EBS, emergency brake assist, MAN EasyStart, LED lighting, electric glass sunroof, preparation for 2 cameras, one connected to reverse gear, high-beam assist, ASR, lane change assist LCS and turning assist, attention warning system, MAN Mediasystem Navi Advanced 7'', MAN Soundsystem Advanced with subwoofer, navigation map Europe + Russia, RIO Box, fifth wheel plate height 40 mm, JOST JSK 42 K0 2'' fifth wheel coupling, coupling height 150 mm, fifth wheel lead 575 mm. Ijdpfxeuciyuj Ah Usig

Condition: used, mileage: 136,386 km, power: 375 kW (509.86 HP), first registration: 06/2023, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 06/2027, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, without retarder Tachograph Version 4.1 Safety package Light and Vision, Efficiency Package Plus Euro 6e, Exhaust outlet downwards, EBS, full emergency brake assistant, roll-away prevention system, LED lighting, mirrors -> preparation for 2 cameras, ASR (traction control), emergency brake assistant, lane departure warning, MAN Media System Advanced Navigation 7'' + navigation map Europe and Russia, RIO Box, smartphone integration, online traffic for navigation function, fifth wheel plate height 40 mm, JOST JSK 37 C 2'' fifth wheel coupling, fifth wheel coupling height 150 mm, automatic fifth wheel lubrication, fifth wheel lead 575 mm from center axle, transmission-dependent PTO Ijdpfx Aol Hzfbsh Usig

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 575 mm, controller manufacturer: FANUC, controller model: 21-M, overall weight: 7,500 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 11,000 W, number of slots in tool magazine: 24, number of axes: 3, This 3-axis DAEWOO MYNX 500 was manufactured in 2000. It features an X-axis stroke of 1,020 mm, Y-axis stroke of 510 mm, and Z-axis stroke of 575 mm. The machine includes a table dimension of 1,200 x 500 mm and a spindle speed of 10,000 rpm. If you are looking to get high-quality machining capabilities, consider the DAEWOO MYNX 500 vertical machining centre we have for sale. Contact us for further details. • Table Dimensions: 1,200 x 500 mm Iijdpozmgiisfx Ah Ujg Additional equipment • Chip conveyor Technical Specification Taper Size ISO 40

Condition: used, functionality: fully functional, conveyor belt length: 1,580 mm, conveyor belt width: 460 mm, conveyor belt speed: 100 mm/s, total length: 1,600 mm, total width: 575 mm, total height: 1,500 mm, motor manufacturer: SEW, Item no.: 1000003859 Iodpfx Ahjtnh Dbe Ujig Used conveyor belt - 1.600 mm Technical data: Overall dimensions: 1,600 x 575 x 1,500 mm (LxWxH) Width incl. side: 530 mm Cheek height: 125 mm Width incl. drive: 650 mm Conveyor length: 1,580 mm Conveyor width: 460 mm Belt type: PVC, smooth with cleats / smooth possible Belt width: 450 mm Cleats: H = 20, cleat pitch = 250 mm Substructure: excl. / incl. (H: 900 to 1,500 mm) Drive: Head drive Motor: Gear motor Motor data: SEW, 0.12 kw, 50-60 Hz, 220-240 Volt Conveying speed: constant, 0.1 m/s Special features: Closed side guide (H: 60 mm) Condition: Used / fully functional Function test: Ok

Condition: used, Used stainless steel tank Previous application: Pharmaceutical / Chemical Item number: 10878 Volume: 500 liters Type: Vertical, on 4 legs Material (product-contact): 1.4571 / AISI316 Design: single-walled Operating pressure (as per nameplate): ATM Jacket operating pressure: 10 bar Tank dimensions: Outer diameter: 755 mm Inner diameter: 750 mm Leg height: 890 mm Total height: 1990 mm Total width: 8755 mm Cylindrical height: 1000 mm Materials: Ijdpfxjw Azcxs Ah Ujig Internal: 1.4571 / AISI316 External parts: 1.4301 / AISI304 Features: Nameplate: no Outlet diameter: 80 mm Distance from outlet to floor: 575 mm

Condition: used, functionality: fully functional, Year of construction: 2001, NOXON Schroeder + Bauer DPH 1400 Double Pallet Decoiler – Year 2001 Technical Specifications: Model: DPH 1400 Year of Manufacture: 2001 Serial Number: 167041 Tabe diameter: 1400 mm Max load: 3000 kg. Voltage: 400 V Frequency: 50 Hz Power Consumption: 0,75 kW Current: 14.2 A Weight: 1000 kg Strip pulling motor Loop control sensor Isdewpciyjpfx Ah Uoig Original documentation in English and schematics CE Certified Manufactured in Germany General Description: The DPH 1400 is designed for reliable coil unwinding from pallets, particularly suitable for large and heavy coils. With its robust construction and 1400 mm table diameter, it is perfect for demanding applications in metal forming, stamping lines, and automated feeding systems. Condition: Used, Fully functional Ready for immediate use German origin, well-maintained We can assist with international shipping and loading. On stock stamping equipment from renowned brands Bruderer, Mabu, Schaal, Bihler, Soprem and more.

Condition: used, TECHNICAL DETAILS - Number of axes : 8 - Number of spindles : 2 - Number of turrets : 2 MAIN SPINDLE - Spindle nose : A2-6 - Spindle power : 18,5 [kW] - Spindle speeds : 59 - 4500 [rpm] - Max. bar diameter : 65 [mm] - Max. turning diameter : 250 [mm] - Max. chuck diameter : 215 [mm] - C axis indexing precision : 0,001 [°] COUNTER-SPINDLE - Spindle nose : A2-5 - Spindle power : 11 [kW] - Spindle speeds : 59 - 4500 [rpm] - Max. bar diameter : 51 [mm] - Max. turning diameter : 165 [mm] - C axis indexing precision : 0,001 [°] - Travel : 575 [mm] - Spindle / counter-spindle distance : 250 - 870 [mm] TURRET 1 - Number of positions : 12 - Number of motorized positions : 12 - X/Z stroke : 195/600 [mm] - Y stroke : +/- 42 [mm] - Live tools speed : 80 - 3600 [rpm] - Live tools power : 5.5 [kW] TURRET 2 - Number of positions : 12 - Number of motorized positions : 12 - X/Z stroke : 195/600 [mm] - Live tools speed : 80 - 3600 [rpm] - Live tools power : 5.5 [kW] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 63 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 3475 x 1933 [mm] - Machine height : 2225 [mm] - Machine weight : 6000 [kg] Ijdpfxouhafro Ah Uoig MACHINE HOURS - Number of hours under power : 42932 [h] - Number of spindle hours : 12433 [h] EQUIPMENT - CNC : 18i-TB - 3 colors status lamp - Coolant tank * with high-pressure pump : 25 [bars] - Chips conveyor - Parts catcher - Parts conveying strip - Bar loader : LNS QUICK LOAD SERVO 3 - Number of turning tool holders : 6 - Number of fixed tool holders : 15 - Collet chuck

Condition: used, TECHNICAL DETAILS - Number of axes : 8 - Number of spindles : 2 Iiedpfxeuhafxo Ah Uog - Number of turrets : 2 MAIN SPINDLE - Spindle nose : A2-6 - Spindle power : 18,5 [kW] - Spindle speeds : 59 - 4500 [rpm] - Max. bar diameter : 65 [mm] - Max. turning diameter : 250 [mm] - Max. chuck diameter : 215 [mm] - C axis indexing precision : 0,001 [°] COUNTER-SPINDLE - Spindle nose : A2-5 - Spindle power : 11 [kW] - Spindle speeds : 59 - 4500 [rpm] - Max. bar diameter : 51 [mm] - Max. turning diameter : 165 [mm] - C axis indexing precision : 0,001 [°] - Travel : 575 [mm] - Spindle / counter-spindle distance : 250 - 870 [mm] TURRET 1 - Number of positions : 12 - Number of motorized positions : 12 - X/Z stroke : 195/600 [mm] - Live tools speed : 80 - 3600 [rpm] - Live tools power : 5.5 [kW] TURRET 2 - Number of positions : 12 - Number of motorized positions : 12 - X/Z stroke : 195/600 [mm] - Live tools speed : 80 - 3600 [rpm] - Live tools power : 5.5 [kW] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 63 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 3475 x 1933 [mm] - Machine height : 2225 [mm] - Machine weight : 7800 [kg] MACHINE HOURS - Number of hours under power : 58774 [h] - Number of spindle hours : 19265 [h] EQUIPMENT - CNC : 18i-TB - 3 colors status lamp - Coolant tank * with high-pressure pump : 25 [bars] - Chips conveyor - Parts catcher - Parts conveying strip - Number of turning tool holders : 11 - Number of fixed tool holders : 11 - Collet chuck

Condition: used, TECHNICAL DETAILS - Cutting strength : 1700 [daN] - Max. slide travel : 75 [mm] - Max. approach speed : 315 [mm/s] - Slide stopping time : 50 [ms] LOWER EXTRACTOR - Diameter : 16 [mm] SUPPLY - Supply voltage : 3x400 [VAC] - Frequency : 50 [Hz] - Rated current : 5.5 [A] Iisdpfxeuhai De Ah Ujg - Installed power : 2 [kW] FLOOR SPACE - Floor dimensions : 1300 x 1100 [mm] - Machine height : 1900 [mm] - Machine weight : 575 [kg] MACHINE HOURS - Working hours : 669 [h]

Condition: used, This listing is for the Thermo Scientific ClearVue Coverslipper The units are in full working condition and are ready for immediate use The Thermo Scientific ClearVue Coverslipper is an automated, high-throughput system designed to streamline slide preparation in pathology and histology laboratories. It is engineered to deliver high-quality, consistent results with minimal manual intervention Key Features and Performance - High Throughput: The system can process up to 250 slides per hour. It can handle up to 11 slide baskets simultaneously through a load-on-demand system. - Specimen Recognition: The system automatically identifies the type of slide preparation (histology vs. cytology) and adjusts the mountant volume. - Stainer Compatibility: It is compatible with various slide stainers, including:Thermo Scientific Varistain Gemini ES and 24-4. - Sakura Tissue-Tek DRS 2000 series. - Leica Auto-Stainer Iisdpfx Ahjyt Ilae Ujg - Pre-loaded Hoppers: The system uses pre-filled coverslip hoppers (holding 500–575 slips) to reduce glass handling and prevent contamination or fingerprints. - Optical Recognition: Sensors ensure proper slide positioning. The system uses vacuum and pressure to mount the cover glass accurately without bubbles

Condition: ready for operation (used), Year of construction: 2024, operating hours: 2,489 h, travel distance X-axis: 400 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 440 mm, number of axes: 3, This 3-axis HAGE 3D Mex-One-A was manufactured in 2024. It features a build area of 400 mm x 600 mm x 440 mm and a heated print bed that reaches up to 180 °C. The machine is designed for unmanned 24/7 operation and includes an advanced filtration system for effective exhaust air purification. If you are looking to get high-quality 3D printing capabilities, consider the HAGE 3D Mex-One-A plastic 3D printer we have for sale. Contact us for further details. • Fused Filament Fabrication (FFF/FDM) • Total Machine on Hours: 4,294 h • Extruder 1 Hours: 1,914 h • Extruder 2 Hours: 575 h • Total Printing Hours: 2,489 • Heated Build Chamber: Up to 100 °C • Heated Print Bed: Up to 180 °C • Maximum Nozzle Temperature: 450 °C • Layer Thickness: From 0.05 mm • Traverse Speed (XY): Up to 250 mm/s • Printing Speed: Up to 200 mm/s Isdpfjzk Erqex Ah Ueig • Build Rate: Up to 150 g/h • Print Head: Water-cooled Dual DSD • Extrusion Pressure: Adjustable • Nozzle Diameter: 0.1–1.0 mm (0.4 mm standard) • Inactive Nozzle Lift: Free stroke • Part Cooling: Up to 4.8 m³/h • Automatic Print Bed Calibration: Multi-point topography measurement • Exhaust Air Purification: Activated carbon and HEPA filtration • Engineering Plastics Capable: Yes • CE Marked: Yes Drying Chamber (DCU), 2024 (optional, not included) • Internal Dimensions (X/Y/Z): 630 × 390 × 260 mm • Capacity: 3 Movable Small Spools (Upper Section) • Capacity: 2 Movable Large Spools (Lower Section) • Maximum Drying Temperature: 100 °C • Filament Feed: Direct Feeding from the Chamber with up to 4 Spools • Automatic Air Exchange and Moisture Removal • Tempering Chamber Internal Dimensions (X/Y/Z): 418 × 601 × 401 mm • Loading Areas: 3 Loading Positions for 600 × 400 mm Sheets or Grids • Maximum Tempering Temperature: 200 °C • Simultaneous Operation of Drying and Tempering Chambers • External Dimensions (X/Y/Z): 1,600 × 695 × 580 mm • Total Weight: Approx. 100 kg • Control: Siemens LOGO! • Maximum Power Consumption: 6 kW • Electrical Connection: Three-Phase AC 230 V, 16 A Fuse per Phase

Condition: excellent (used), Weiss Type: SWT 1000 – IPX9K Weiss Spray and Splash Water Test Chamber Description: Offered for sale is a WaterEvent SWT 1000 test chamber from Weiss Technik – ideal for standardized testing of enclosure or component water ingress protection (IP) classes. With optional features, testing according to IPX9K (high-pressure/steam jet), ISO 20653, and additional standards is possible. High-pressure/steam jet nozzles for IPX9K Jet nozzles for IPX5/6, among others, compliant with standards: ISO 20653, DIN EN 60529, SAE J 575, JIS D 0203, MIL-STD 810, EN 60068-2-18, IEC 60598-1. Possible Protection Classes & Tests Depending on configuration, the SWT system covers a wide range of tests: Standard configuration: IPX3 / IPX4 tests (spraying and splashing water from all directions). Optionally: Higher protection classes up to IPX5 / IPX6 (jetting water), and – with corresponding high-pressure configuration – up to IPX9 and IPX9K. Tests are based on standards such as DIN EN 60529 (for IP protection levels) and ISO 20653 (e.g. for vehicle or outdoor applications) – depending on intended use. Iedezil T Sopfx Ah Ujig Typical Applications Typical application scenarios for such a test chamber include: • Electronic devices or enclosures intended for outdoor use or humid environments, such as outdoor lighting, control housing, assemblies, panels. • Components for vehicles or machines, especially those exposed to rain, splashing water, or high-pressure cleaning (e.g., construction machinery, e-bike or vehicle parts). • Batteries or electrical components requiring water ingress protection testing – e.g., automotive industry or e-mobility applications. Technical Data: Applicable protection classes: IPX3 / IPX4 Oscillating tube radius (for IPX3/4 tests): standard 200 mm (for SWT 1000), optionally up to 400 mm. Test chamber (interior): Internal dimensions: approx. 1,000 × 1,015 × 1,000 mm (W × H × D) Operation / Control: Web panel or GUI for test programming and control. Condition: used Scope of supply: (see photo) (Data subject to change and correction. Technical specifications may be updated without notice.) Further questions welcomed by phone.