Used Tabe Agb-95 for sale (13,190)

Condition: good (used), Code: 0166 Brand: LANDONIO LAR Model: LV 800 2-disc sander for wood modelling, aluminium modelling, various materials, custom furniture, nautical furniture Heavy cast iron structure Disc diameter mm 800 Table size mm 980 x 400 Table disc inclination upwards-downwards 45 degrees/45 degrees Motor Kw 4 Disc rpm 950 Built-in vacuum cleaner - Motor Hp 1 Suction mouth diameter mm 120 Overall dimensions mm 1520 x 1050 x 1350 h Weight kg 800 Djlnjqv Aq Ij Iiuisut

Condition: used, Year of construction: 2002, turning diameter 330 mm swing diameter 610 mm turning length 1500 mm control Mazatrol Fusion 640 MT spindle bore 88 mm turning speeds 35 - 3000 U/min milling head speed 15 - 10.000 U/min x-axis 580 mm y-axis 230 mm z-axis 1695 mm C-axis 0,001 ° Djlnewhqrmj Iiuijut milling head -swivable ° tool magacine with 40 tool taper Capto C6 total power requirement 32,7 kW weight of the machine ca. 9650 Kg dimensions of the machine ca. 5,9 x 2,4 x 2,2 m Röhm Duro-NC 320/3 chuck; 1 set of hard stepped jaws / 1 set of hard base jaws with soft top jaws Chuck key Tool-Eye Renishaw probe ready Renishaw MP10 probe Tailstock Chip conveyor / standard pump / high-pressure pump / gap filter

Condition: used, Year of construction: 1994, No. 04470 Electro-hydraulic veneer press Joos HP 90 Used, year of construction 1994 Press area 2550 x 1350 LW Gold anodized heating plates, electrically heated Total pressing pressure 90 tons Opening width 400 mm 4 press cylinders each 90 mm diameter Specific pressing pressure with full load 2.75 kg/cm2 Specific pressing pressure with 2 m2 load 4.58 kg/cm2 Operating pressure 355 bar Thickness of the heating plates approx. 51 mm Connected load per plate 9.1 kW Operation with rotary switch Push-button control for opening / closing / stop 2 safety ripcords (all-round) Automatic activation (overrun) of the press cylinders when pressure is released The “Goldeloxal-Decor D.B.G.M.” system makes the surface of the valuable heating plates extremely hard. This results in no scoring, reduced consumption of release agents, shorter working time, no film wear and higher quality veneer work. At the heart of the hydraulic quality press is the hydraulic unit, securely installed in the center of the lower part of the press. This design prevents damage to the motor, pump and other units. The motor, valves and two-stage high-pressure pump are maintenance-free at Joos. With the dynamic piston bearing, the pistons are not bolted to the pressure table but instead rest dynamically on a planed support surface under the pressure table. The table is prevented from tilting and moving by a column guide. A precision rack and pinion parallel guide ensures the synchronization of the printing table. Transport dimensions approx. 2950 x 1560 x 2160 mm LWH Djlowhc Awjn Iiuijut Weight approx. 3600 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as viewed” Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex warehouse or location

Condition: used, operating hours: 5,190 h, Field of application: Internal logistics Please contact ATS Norway AS for more information Please provide reference number upon request: 18995 Specifications: Model year: Unknown (before 2000) Max lifting height: 3.5 m Max lifting capacity: 3,000 kg Weight: 4,680 kg Dujlsvgym Sjn Iiuijt Hours: Approximately 5,190 Diesel Tires: See pictures for details Twin front wheels Videos Services performed by owner Delivery: By arrangement Description: This forklift, with a maximum lift height of 3.5 meters and a lifting capacity of 3,000 kg, is used in the workshop and in daily operations. The owner is unsure of the model year, but states that it is from before 2000. It has twin front wheels and a diesel engine, and has run approximately 5,190 hours. Delivery can be arranged as needed. Hours: 5190

Condition: used, Functionality: fully functional, Year of construction: 2020, operating hours: 8,563 h, load capacity: 5,000 kg, lifting height: 4,000 mm, free lift: 2,000 mm, fuel type: diesel, mast type: duplex, construction height: 3,000 mm, fork carriage width: 1,860 mm, fork length: 1,500 mm, total length: 4,574 mm, engine type: Perkins 4 Zyl., drive type: Diesel, construction width: 1,860 mm, net weight: 8,490 kg, Rough Terrain Forklift Load Center: 600 Fork Width: 150 mm Fork Thickness: 60 mm ISO Class: ISO Class 4 = 5,000 - 10,000 kg Mast Type: Duplex Transmission: Hydrostatic Drive Condition: Ready for use and fully functional Technical Condition: Very good Duelowgr U Hjn Iiuijt Front Tires Type: Pneumatic Front Tires Size: 495x45x22-5 Rear Tires Type: Pneumatic Rear Tires Size: 225x75-10 Description: In addition to this forklift, we also offer other forklifts and warehouse equipment. Our equipment is workshop and FEM4.004 tested. Please contact us by email or phone. You can also find us at hsr-gabelstapler. Of course, we also buy your used equipment, even if you don't purchase a vehicle from us. Hire purchase and financing with favorable terms are available upon request. We're happy to provide you with expert and detailed advice on our vehicles. Sideshift, fork positioner, 3rd valve, 4th valve, rear work lights, front work lights, heating, full cab, air conditioning, full free lift, CE certificate, interior mirror, exterior mirror, joystick, windshield wipers, single pedal, seat,

Condition: new, Manual hand unit Nein J/N Automatic for single pieces Ja J/N Automatic for frames Nein J/N Clip set "351" on the loose item ----- Manufacturer description: - Base frame in stable welded construction - Clip container as tipping conveyor with separation and feeding the clips - Screwdriver with tipping conveyor for the screws to be separated, feed screwdriver pneumatic with depth adjustment - Conveyor belt length approx. 4,000 mm as NC axis - Contact and clamping cylinder - Electro-pneumatic control via PLC It can programs with different Djlnokx Stno Iiuisut Initial and distance dimensions can be entered - Workflow automatically in flow ----- Technical specifications: - Screw height 50-120 mm - Profile length 350-3,500 mm - Table height approx. 950 mm ----- Total price of the machine ex works: on request! Freight costs within Germany: on request ! Installation, commissioning and instruction within Germany: on request ! ----- Video shows version with extra infeed belt and outfeed belt with pusher. Not included in the basic price. Can be offered as an option if required. (technical data according to the manufacturer without guarantee!)

Condition: good (used), Code: 0030 Brand: MARZANI Model: RE/2 Automatic slot-cutting machine for window shutters Technical data Spindle coupling mm 10 Bit rotation 10000 rpm Two uprights can be processed simultaneously Dujlnevyy Uij Iiuist Several cutting intervals executable Main motor Hp 2 Working unit inclination Bits lowering adjustment Feed adjustment Slot skipping Compressed air 6-7 bar Overall dimensions mm 1450 x 950 x 1400 h Weight kg 440

Condition: excellent (used), Year of construction: 2012, Ref:10953 . 2012 Aster Universe - Digital folding, gathering and book sewing machine The new sheet-fed solution for fast and versatile digital book production. This automatic folding and book-sewing machine is faster and features automatic set-up that reduces change-over time significantly, making the solution even more versatile. Equipped with: Flat pile feeder (for single sheet) Folding unit Collating unit Sewing unit Thread trimming device Delivery Touchscreen computer Automatic size change Specification: Max. speed 550 A4 sheets/min Djln Iiswh Tudouisut Sheet size:    Max:  420 x 640 mm / Min: 120 x 200 mm Signature size:    Max:  420 x 320 mm / Min: 150 x 100 mm

Condition: used, Year of construction: 2017, operating hours: 6,072 h, 2017 | Caterpillar | Caterpillar M315 with 3 buckets | Used Wheeled Excavator | 6072 hours 📍Location: France, Gimont 🚛 We Deliver to your destination – Estimate the shipping cost with our calculator! 💰 Buy Now for EUR 95000 or Make an Offer. Request payment at delivery for an affordable fee! (subject to approval)* 👷‍♂️ Inspected by an independent expert 59 inspection points 53 approved ✅ 6 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Machine in perfect working order. Machine inspected on site. ❓Want the Full Inspection Report, Extra Photos & a Video? 🔍 Search this on Google for full details!: "38399 Equippo" 💡 Why Buy from Us? ✔ Fully inspected machines ✔ Delivered to your jobsite Dslswgr H Nen Iiuieut ✔ Money-Back Guaranteed ✔ Safe payment methods with possibility to pay at delivery ❓Got machines to sell? Contact us for a free evaluation

Condition: used, Year of construction: 2022, Serial number: SA9FT4A55MH17xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 19594 Specifications: - 2022 model - 4 axles Duolnsvyfq Nj Iiuiot - Tires (see pictures) - Pull out on the drawbar - Internal total length: 8,843 m - Inside mlp scene 1: 2,748 m - Inside mlp scene 2. 5,780 m - Lift on 3. axle - Swing on 1st and 2nd axle - Ready for delivery Drum brakes Description: The machine trailer is in good condition according to the owner. Everything works as it should. Ready for delivery Technical approved: Yes EU-approved until: 06.02.2026 Own weight: 8600 Total Weight: 36000 Payload: 27400 Width: 254 Length: 1205,5

Condition: used, Year of construction: 2019, operating hours: 1,950 h, lifting height: 3,070 mm, fuel type: electric, mast type: duplex, fork length: 2,400 mm, total height: 2,330 mm, total length: 2,950 mm, total width: 1,400 mm, color: other, Empty weight: 7.121 kg Lifting capacity: 5.000 kg Fork dimensions: 2.400 x 1.100 mm Djlswgaften Iiuiout - Lifting capacity: 5000kg - Lifting height: 3070mm - Maximum fork width: 1100mm - Number of wheels: 4 Wheels - Overhead clearance: 2330mm - Attachment: Side-shift - Options: Work lights, Verwarming, Full cabin - Fork length: 2400mm - Free lift: 0mm - Mast: Duplex - Year: 2019 - Documentation available: No - CE mark available: Yes - Serial number: 516329V00564 - Operating hours: 1950 - Battery voltage: 80V - Brand/Type: Still - Capacity: 930Ah - Battery year of construction: 2019 - Drive: Elektric - Transport dimensions: 2950mm x 1400mm x 2330mm (l x w x h) - Transport weight [kg]: 7121kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Koen van Lent

Condition: used, 0 800x600 mm Motor output 18,5 kW 0 0,6 m³ Doljvvx Dzjn Iiuiout Diameter of the motor 252 mm Dimensions (L/W/H) 1700x1130x1595 mm Weight 1300 kg Number of working hours 1741 h WEIMA shredder WL 4, machine completely checked ----- Note: The machine has been completely checked by us, it is running perfectly, see video. The blade and slide plate have already been replaced by the previous owner. We replaced the V-belt during the inspection. Description: The Weima high-performance shredders with their flexible application options can process all types of wood materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer residues, etc.) into fuel chips and achieve an enormous reduction in the volume of the material in the case of bulky materials. Function: The machine is equipped with a large filling hopper and can be fed using a conveyor belt or by hand. This hopper can be adapted to individual needs and guarantees a continuous and cost-effective material feed without the need for manual assistance. The hydraulically controlled slider feeds the wood waste to be shredded to the cutting area of ??the rotor and is controlled automatically and depending on the load. The internal slider guides are made of highly abrasion-resistant plastic (polyamide) and can be adjusted. The hydraulic cylinders are cardanically suspended to avoid transverse forces on the piston sleeves. The patented and profiled V-rotor made of solid steel has a diameter of 252 mm and works at a rotor speed of 80 - 120 rpm. The concavely ground, aggressive and 4- way rotating knives / cutting crowns are located in milled knife pockets on special knife carriers. This patented system guarantees high throughput, low energy consumption and optimal discharge of the shredded material by reducing the cutting gap between the counter knife and the rotor for the first time. The screen mounted under the rotor determines the chip size (10 - 100 mm). A hydraulically opened screen basket is also available on request. The power is transmitted from the electric motors via V-belts to a strongly dimensioned gear, which is mounted on one side of the rotor on the shaft stub. Technical data WL 4 / 18.5 kW ----- Feed opening: 600 x 800 mm Standard hopper capacity: 0.6 m³ Rotor working width: 600 mm Rotor diameter: 252 mm Power: 18.5 kW Rotor speed: approx. 90 rpm Sieve diameter: 15 mm Paint finish: Weima standard RAL 2002 / 7016 Connection value: 400 V +/- 5% / 50 Hz Weight: approx. 1,300 kg Includes: Electrical control (Moeller / Siemens / Allen-Bradley) Control cabinet (Rittal / Sarell) Concavely ground cutting crowns (40 x 40 mm ) Sterntriangular start Vibration-damping foundation V-rotor (patented) with knife pockets milled into the profile (technical information according to the manufacturer - no guarantee!)

Condition: good (used), Code: 0385 Brand: MASTERWOOD Model: CN 3 T F CNC chisel mortiser with router for the execution of shutters of any type, uprights of frames in general, milling of panels, Stanley hinges, balconies, doors, etc.. Technical data: Dueln Iiujunh U Aoiot Max workpiece size mm 150 x 110 x 2800 Working head with quick setting device of tool stroke Max slot depth mm 130 Vertical head stroke mm 140 Longitudinal speed mt/min 30 Main motor Hp 3 High-frequency drilling-routing unit (T.F.) with controlled axis - Power Hp 5-7,5 - Speed rpm 12000/18000 Numerical control unit with video with memory storage capacity of 50 cycles (higher ) The control can also perform a sequence of different working cycle and carry out automatically right, left, or mirror type machining. Overall dimensions : machine mm 4300 x 1600 x 1600 - electrical panel mm 1200 x 500 x 950 h Weight kg 2600

Condition: used, Year of construction: 2016, turning diameter 366 mm turning length 700 mm control Celos Mitsubishi M730U turning diameter over bed 920 mm turning diameter over cross slideways 742 mm max. turning speeds 4.000 min/-1 drive capacity - main spindle 18,5/18,5/15 kW max. rod diameter 80 mm number of tool places 12 Pos. tool taper BMT 80 x-axis 260 mm z-axis 795 mm y-axis +/- 50 mm mm tailstock taper MT5 weight of the machine ca. 4,7 t The machine has been overhauled with the following components: - Ball screws in the X, Y, and Z axes - New main spindle - Complete maintenance package - Recalibrated and recalibrated This puts the machine in like-new technical condition. Technical Features: - 12-position BMT 80 tool turret, max. speed 10,000 rpm, 5.5/5.5/3.7 kW - Y-axis - Overhang for driven tools 100 mm - Scraper-belt chip conveyor - Coolant system with increased pressure of 5 bar Accessories: - Coolant shower on the main spindle chuck - Compressed air blow-off system for tool cutting edges - Line filter for coolant system - Compressed air blow-off system for tailstock center - Mechanical I/F for 150 mm oil mist separator - 4-color signal light - EtherNET I/P interface for automation Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as Doln Iiowgwnlouieut subject to prior sale!

Condition: good (used), mileage: 80,000 km, power: 132 kW (179.47 HP), first registration: 05/2022, fuel type: diesel, color: white, axle configuration: 4x2, tire size: 195/75R16C, fuel: diesel, wheelbase: 4,100 mm, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, loading space width: 2,100 mm, loading space length: 4,100 mm, loading space height: 400 mm, Year of construction: 2022, Equipment: air conditioning, differential lock, parking heater, trailer coupling, = Additional Options and Accessories = - Electric Windows - Air Conditioning - Fog Lights - Power Steering - Stability Control - Auxiliary Heating - Toolbox - Xenon Headlights - Central Locking Dolewgpbwjn Iiuijut = Additional Information = Tire Size: 195/75R16C Brakes: Disc Brakes Suspension: Leaf Spring Front Axle: Max. Axle Load: 2100 kg; Steered; Left Tire Tread: 60%; Right Tire Tread: 60% Rear Axle: Dual Tires; Differential Lock; Max. Axle Load: 2600 kg; Left Tire Tread Inside: 60%; Left Tire Tread Outside: 60%; Right Tire Tread Inside: 60%; Right Tire Tread Outside: 60% Engine Capacity: 2,998 cc Technical Condition: Good Visual Condition: Good

Condition: excellent (used), Year of construction: 1996, The SCHEER DB 4 universal dowel hole drilling machine is specially designed for drilling structural holes, drilling rows of holes in a 32-hole grid system, and drilling various types of fittings. It enables all of these tasks to be performed quickly, precisely, and without extensive setup times. Simple operation via icons and 4 program presets allows for rapid changeover to the new work process. Central adjustment of the removable side stops ensures constant flushness at the front edge and precise drilling of left and right workpieces. It doesn't matter whether the parts are cut to size or at an accurate angle. The doweled corner joint is always flush, both on the edge and on the surface! No other CNC machine can achieve this with the simplicity and speed of a SCHEER DB 4. Safety clamping device across the entire table width allows workpieces to be clamped directly to the drilling beam. Stop rail with three adjustable folding stops. Continuous table supports facilitate pushing and drilling long workpieces, while fold-up workpiece support tables facilitate row and hinged drilling. 2 drilling units Drill motor type BM 602-230/400 volts, 50 Hz, n=2860, 2.2 kW power 25-spindle drive unit Spindle pitch 32 mm For surface and end-face drilling. Gantry clearance: max. 950 mm Working length: max. 2360 mm Location: Arrives at the end of April at warehouse 54634 Bitburg Dolnev Trk No Iiuieut Sold as is - no warranty - no guarantee - freight prepaid -

Condition: used, Year of construction: 2012, total length: 750 mm, total width: 750 mm, total height: 950 mm, Empty weight: 100 kg - Year: 2012 - Documentation available: No - CE mark available: Yes - Serial number: H2634320 - Transport dimensions: 750mm x 750mm x 950mm (l x w x h) - Transport weight [kg]: 100kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT Dsln Iewgafmeiuieut VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Peter Stroomberg

Condition: used, Year of construction: 2008, travel distance X-axis: 1,700 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 1,400 mm, controller manufacturer: MAZATROL, controller model: 640M, total height: 3,959 mm, table width: 1,000 mm, table length: 1,000 mm, overall weight: 30,000 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 37 W, space requirement length: 9,007 mm, space requirement width: 5,676 mm, CONTROLS .. CNC controls MAZATROL 640M WORKING RANGE -CUBIC- .. X-axis travel: 1700 mm .. Y-axis travel: 1400 mm .. Z-axis travel: 1400 mm TABLE .. table surface (left-right): 1000 mm .. table surface (front-back): 1000 mm .. workpiece load (max): 3000 kg SPINDLE / HEAD .. spindle revolutions (min): 35 /min .. spindle revolutions (max): 10000 /min .. drive power: 37 kW .. spindle torque: 525 Nm AXIS DRIVES .. rapid traverse: 40000 mm/min .. rapid traverse X: 40000 mm/min .. rapid traverse Y: 40000 mm/min .. rapid traverse Z: 40000 mm/min TOOL MAGAZINE .. magazin type: chain magazine .. number of positions: 160 Delnewhbufs Iiuisut .. tool diameter max.: 135 mm .. - with free neighbour positions: 260 mm .. tool length max.: 650 mm .. tool weight max.: 30 kg .. tool changing time: 6.9 s AUTOMATIC WORKLOAD EQUIPMENT .. store type: pallet changer .. number of store positions: 12 .. number of pallets: 12 ELECTRICAL SPECIFICATIONS .. mains power supply: 100 kVA .. mains voltage: 400 V .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. space requirements -left/right-: 9007 mm .. space requirements -front/back-: 5676 mm .. total height: 3959 mm .. total weight approx.: 30000 kg ATTACHMENTS .. chip conveyor: yes .. coolant unit: no .. through spindle coolant attachment: yes .. closed cabin: yes .. European CE standards: yes We are selling 2 Mazak FH-10800 built in 2008 and 2006, including pallet station. -Capacity for 12 pallets - Tool holder SK 50 (Din 69871 A) -Hangs on central cooling, high pressure pump is included -Clamping cubes each 500x1000x1500 mm and 650x650x1500 mm

Condition: good (used), Code: 0042 Brand: FRAVOL - ITALY Model: A 16 ACR - CE Standard Edge bander for pre-glued edges with trimming unit for straight and curved panels - CE Standard Technical data Min/max panel height mm 10/60 Feed speed mt/min 3,8 Djln Ijv Ay Hksiuiout Temperature regulator 0-500° Voltage 220 Installed power 3700 Watt Upper/lower trimming unit Overall dimensions mm 950 x 600 x 1000 h Weight kg 120

Condition: used, Year of construction: 1975, Various accessories for a facing lathe Make: TADU Model: F 650 Year of manufacture: approx. 1975 - Main spindle ASA mounting A 1-8", spindle bore 60 mm Price: 1.495,00 € - Drive unit for the headstock 8 - 42 and 40 - 200 rpm, 5.5 kW Price: 2.280,00 € Dujln Iiuectgb Toiot plus VAT Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Year of construction: 2001, operating hours: 33,790 h, Condition: ready for operation (used), General Data Machine weight 5300kg Movement X-Axis Movement 950 Y-Axis Movement 550 Z-Axis Movement 480 Deln Iiuewg Ifzjijut Additional Equipment Grinding Wheel Speed: 1450 rpm / Grinding Wheel Size: 400 x 60 x 127 mm / Grinding Wheel Motor Power: 7.4 kW (10 hp) /Hydraulic Motor Power: 2.2 kW (3 hp) Coolant Filter Device / Working Place Lighting System / Danfoss Inverter / Heat-Exchanger for Hydraulic Power Unit This 3-axis ROSA ERMANDO LINEA Iron 08.6 was manufactured in 2001. Ideal for precision surface grinding, this machine maintains robust functionality despite its years. If you are looking to get high quality grinding capabilities consider the ROSA ERMANDO LINEA Iron 08.6 machine we have for sale. Contact us for more information. Application Types Grinding

Condition: good (used), Year of construction: 1996, Grass ECO Press pot hole drilling machine Year of manufacture 1995 Dueln Ijvzbuyeiuiet Right and left stops Weight approx. 45 kg 380 V - 50 Hz - 2.5 A Pneumatic connection - max. 6 bar CE marked Location: from warehouse 54634 Bitburg - free loading Immediately available Handed over in the current condition, as inspected in Bitburg, Without guarantee, without warranty

Condition: excellent (used), Year of construction: 1993, Grass fitting and hole row drilling machine used, good condition Type BBM-R Year of manufacture 1993 Mach. No. 931137 Vertical drilling head 1st fitting 2nd fitting 3rd fitting Turret head for selecting the drill head Hole row drilling head with pins Number of spindles in a row 15 pieces with press-in die 1 piece Stop rulers Dusln Iiuevzb Dnjist Weight: 95 kg Storage location 54634 Bitburg, free loading, unpacked Handed over in the current condition as inspected

Condition: new, Year of construction: 2025, Holzkraft Edge Sander: KSO 150 F PRO With oscillating sanding belt for the best sanding results Item number: 5390020 Brand: Holzkraft Sanding unit can be pivoted using a hand crank The welded steel machine stand guarantees high torsional rigidity and vibration-free operation Oscillating sanding belt with separate gear motor for better sanding results Oscillation can be optionally activated Granite-coated sanding sole for a longer sanding belt service life Height-adjustable sanding table for utilizing the entire sanding belt width Additional table with extraction openings for sanding radii on the rubberized guide roller Sanding sleeve device with attachable work table The spring-loaded belt tension automatically compensates for belt length differences With adjustable stops, ideal for veneer sanding The grooved veneer stop allows the veneer overhang to be adjusted TECHNICAL DATA Dimensions and Weights Length (product) approx. 1700mm Width/Depth (product) approx. 1000mm Height (product) approx. 1150mm Net weight approx. 300kg Extraction connection Number of extraction nozzles: 2 Extraction nozzle diameter: 100mm Worktable(s) Worktable length: 950mm Worktable width: 450mm Worktable height adjustment: 110mm Electrical data Connection voltage: 400V Mains frequency: 50Hz Oscillation motor power: 0.11kW Sanding unit Sanding belt length: 2640mm Sanding belt width: 150mm Belt rotation speed(s): 14m/s Oscillation stroke: 15mm Sanding surface length: 800mm Sanding surface width: 150mm Sanding unit pivoting 0 – 45° SCOPE OF DELIVERY 1x Sanding Belt K100 5x Rubber Rollers Ø25, Ø30, Ø40, Ø45, Ø50 mm Doln Iisv Sk Nnouieut 6x Sanding Sleeves K80 - Ø25, Ø30, Ø35, Ø40, Ø45, Ø50 mm On-Board Tool Kit Miter Gauge

Condition: excellent (used), Year of construction: 2000, Eumacop band saw type: ER 600 - very good condition - Model ER 600 Machine type band saw Year of manufacture 2000 Technical data Roller diameter: 600 mm Passage width: 585 mm Passage height: 395 mm Total height of the machine: 2,115 mm Maximum saw blade width: 35 mm Maximum saw blade length: 4,725 mm Main motor: 2.2 kW Top roller guide APA Bottom roller guide APA Version: left-hand machine Conformity marking: CE mark Total connection: 2.2 kW Weight approx.: 275 kg Space requirement Length: 0.75 m Width: 1.1 m Height: 2.22 m Location: from stock 54634 Bitburg - immediately available - Duoln Iisvr H Nwjuijt