Used Tabe Agb-95 for sale (13,192)

Condition: used, Year of construction: 1997, Dimensions (LxBxH): 80 x 65 x 115 cm Dusbvdijwgmk Nsdwet - Year: 1997 - Documentation available: No - CE mark available: Yes - Serial number: A|| 115895 - Transport dimensions: 800mm x 650mm x 1150mm (l x w x h) - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Condition: used, mileage: 94,495 km, Year of construction: 2018, Field of application: Freight transport Serial number: VF3YC3MFB12H70724 Please contact ATS Norway AS for more information Please provide reference number upon request: 20208 Specifications: - 2018 model - 94,495 km - 163 hp - Manual transmission - 4x4 - Webasto w/hours - Euro 6 engine - Van - Side doors on both sides - Summer/winter tires included - Air conditioning/ac Dusbowdu Taevdidwet - Lights - Rear cargo area heating - Mirror heating - Electric mirrors - Radio - Ready for delivery Description: We have a 2018 Peugeot Dangel Boxer 4x4 Van w/ side doors on both sides for sale. Everything works as it should according to the owner. The car has a service history and can be documented. The wheel bearings need to be replaced, but this will be done before sale. Ready for delivery. Km: 94495 HK: 163 Technical approved: Yes EU-approved until: 13.12.2025 Own weight: 2065 Total Weight: 3500 Payload: 1360 Width: 205 Length: 541 Euro: 6 Gearbox: Manual

Condition: used, Year of construction: 2022, Used machine Duebvdowhuktsidwet Year of manufacture: 2022 Condition: As good as new Equipment and technical data: Mobile clean air dust extractor The most powerful among the mobile dust extractors Mobile dust extractors of the Vacomat series are suitable for extracting dust and chip material. Dust extractors are often used as single or multi-machine extraction systems in small and medium-sized companies with air volumes of up to 8,000 m³/h. Our mobile dust extractors are tested according to the regulations of the Wood Trade Association. With the H3 (residual dust content < 0.1 mg/m³) and GS (tested safety) test marks, Vacomats can also be installed indoors in the workshop. To ensure healthy return air, we only use our high-quality filter material of dust class "M". Our dust extractors achieve low electricity costs for environmentally friendly extraction operation thanks to energy-saving, high-efficiency motors "made in Germany." Cleaning methods for our mobile dust extractors • Pneumatic-mechanical cleaning (designated XP) using a patented vibration system by "knocking out"; compressed air connection required; starts manually as needed when the processing machine is switched off • Electro-mechanical cleaning (designated XPe) using an efficient vibration motor; no compressed air connection required; starts automatically after the processing machine is switched off • Compressed air cleaning (optional) for continuous operation, no extraction breaks necessary, especially recommended for the finest and special dusts from CFRP, GRP, gypsum, etc. Vacomat 250 XP, 300 XP, and 350 XP dust extractors are supplied with an automatic control cabinet: automatic fan start-up, automatic filter regeneration The highlights at a glance: ? Performance sizes from the small entry-level model to the powerful one Extraction center ? Application-specific component selection for cleaning and disposal options ? Environmentally friendly and energy-saving operation, also through heat recovery (recirculation principle) ? Energy-saving control features (PLC control) including volume flow monitoring ? User-friendly control of the dust extractor is also possible via the processing machine ? Quiet operation thanks to soundproof housing ? Maximum workplace safety thanks to BG certification (according to GS HO 07) and pressure-resistant construction (according to DIN 8416) ? From Vacomat 250 XP, including automatic fire extinguishing system (powder extinguisher) ? The tested filter materials guarantee healthy return air ? Largest possible filter area thanks to SchukoCone® filter bags - especially recommended for the finest dusts ? Delivered plug-in for quick and easy on-site installation Technical specifications 300 XP: Suction nozzle Ø 300 mm Motor power max. 7.5 kW Flow rate 5,950 m³/h Nominal flow rate (at 20 m/s) 5,087 Valve pressure 2,760 Pa Filter area 32 m² Certification mark: H3 (residual dust content < 0.1 mg/cbm), BGHM HO 143032 Filter regeneration: pneumatic Sound pressure level: 74 dB(A) Incl. Schuko V22/23 series control cabinet Incl. forklift brackets Weight including packaging: 990 kg Transport dimensions: 3.70 m * 1.60 m * 2.30 m Installation dimensions: 3.65 m * 1.54 m *

Condition: used, Functionality: fully functional, mileage: 230,178 km, power: 120 kW (163.15 HP), fuel type: diesel, gearing type: automatic, first registration: 03/2013, next inspection (TÜV): 04/2026, emission class: euro5, color: black, number of seats: 6, number of previous owners: 1, Year of construction: 2013, machine/vehicle number: FOCS714, Equipment: ABS, air conditioning, airbag, car registration, central locking, cruise control, electronic stability program (ESP), parking heater, parking sensors, power assisted steering, sliding door, trailer coupling, Special equipment: Dealer or export preferred Towing capacity 2500 kg, Audio 20 audio system (radio with CD changer), bi-xenon headlights with cornering lights, roof rails, remote control for auxiliary heating, luggage compartment cover/blind and luggage net, left-hand sliding door for cargo/passenger compartment, 95 Ah fleece battery, auxiliary heating (hot water) Dujbvdidewhwy Dewst Other equipment: Adaptive brake light, passenger-side airbag, driver-side airbag, trailer hitch: electrical system for trailer socket, washer fluid level indicator, both aspherical exterior mirrors, electrically folding exterior mirrors, electrically adjustable exterior mirrors. adjustable and heated, both, exterior mirrors with integrated indicator light, outside temperature display, mounting rails for roof rack, BlueEfficiency package, floor covering: carpet in the driver's compartment, floor covering: carpet in the loading/passenger compartment, brake assist, cockpit soft touch, roof control unit with reading light on the driver's/passenger side, roof paneling, Trend design and equipment line, windows for rear doors/tailgate with wiper/washer system, windows in the loading/FG compartment: - electric. hinged, rear left/right, window in loading/chassis: - fixed, front left, window in loading/chassis: - fixed, front right, windscreen with window antenna, lockable glove compartment, tailgate, interior lights in loading/chassis: 2 additional, interior filter: pollen filter, body/structure: bus, body/structure: compact, child safety lock, automatic climate control in the rear (Tempmatik), comfort chassis, steering wheel (mechanically adjustable steering column), multifunction steering wheel including trip computer, alloy rims, media interface (universal interface for iPod / AUX / USB), metallic paint, center console with storage compartment, model update, engine 2.1 Ltr. - 120 kW CDI KAT, Parktronic system (PTS), passenger car registration, wheelbase 3200 mm, tire repair kit with compressor, interior rear view mirror, low emissions according to Euro 5 emission standard, sliding door loading/passenger compartment on the right, Seat belt system with warning system (driver/passenger side), Seat equipment: quick-release mechanism for seat rail system, Seat cover/upholstery: fabric/artificial leather Leon, Seats in driver's cab: heated passenger seat, Seats in driver's cab: comfort passenger seat, Seats in driver's cab: heated driver's seat, Seats in driver's cab: comfort driver's seat, Seats in cargo/vehicle compartment: 1st row, 1 single seat on the left, Seats in cargo/vehicle compartment: 1st row, 1 single seat on the right, Seats in cargo/vehicle compartment: 2nd row, 1 single seat on the left, Seats in cargo/vehicle compartment: 2nd row, 1 single seat on the right, Sun visors with mirror (illuminated), Power socket (12V connection) in cargo/passenger compartment, Painted bumper/side bumper strip + handle on tailgate, Darkened rear glass/black glass, Heat-insulating glazing (windshield with band filter at the top)

Condition: ready for operation (used), Year of construction: 2000, Colchester Triumph VS2500 Gap Bed Centre Lathe Max. Distance Between Centres 1250mm Max. Swing over Bed 400mm Max. Swing in Gap 585mm Max. Swing over Cross Slide 246mm Spindle Nose D1-6 Camlock Spindle Bore 54mm Djbjwihl Hevdidwjut Spindle Speeds 13 -2500 rpm (3 Ranges) Selection of Tool Holders 7.5kw / 10hp Motor Supplied with: Digital Readout 3 Jaw Chuck 3 Point Fixed Steady Selection of Holders Coolant 415V Electrics FOR SALE WITH JET MACHINERY LTD Jet Machinery Stock No: #78790 Machine Serial Number: 2575007770 Cost: £9,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: new, Year of construction: 2024, working width: 800 mm working height: 300 mm Dujbvjgfm D Nodidwst min. Workpiece length: 250 mm aggregate: 2 Units seperatly adjustable 1. brush: Metalbrush diameter 220mm 2. brush: Tynexbrush, grit 80, diameter 220mm height adjustment: manual read out workpiece thickness: mechanical counter feed speed: 4 - 12 m/min motor power brushes: 2 x 5,5 kW motor power feed: 0,37 kW machine length: 1400mm machine width: 1500mm waight: 950kg

Condition: used, Year of construction: 2024, total width: 1,950 mm, total height: 1,410 mm, total length: 1,330 mm, outer dimension length: 1,330 mm, outer dimension width: 1,950 mm, Empty weight: 850 kg Price: On request - Year: 2024 - Documentation available: No - CE mark available: Yes - Serial number: 910-3158 - Transport dimensions: 1330mm x 1950mm x 1410mm (l x w x h) - Transport weight [kg]: 850kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Debvdidewgki Njwout Glenn Smeets

Condition: reconditioned (used), machine/vehicle number: 27918, Year of construction: 2018, operating hours: 11,633 h, – REMADE FOR ACTION WE ARE THERE FOR YOU. WITH COMMITMENT, PASSION, AND KNOW-HOW. Used industrial trucks from selected premium manufacturers are fully serviced, tested, and reconditioned by us according to FEM-4.004 (UVV) specifications. Over 350 vehicles in stock. Custom conversions of any kind are possible upon customer request. International transport with suitable vehicles and customs clearance is available upon request. See for yourself and visit us at our factory. Friedmann Forklifts - Our Quality Promise Full functionality according to FEM-4.004 Serviced and tested (C5 test) battery for electric devices (min. 70% capacity) Serviceable tires according to FEM-4.004 (min. 70% tread depth) Lift mast, fork carriage, attachments, and hydraulic system and hoses inspected Steering axle safety tested Forks and lift chains inspected As-new driver's seat and seat belt New paint in original colors and original stickers Forklift truck specifications Manufacturer: Jungheinrich Dujbvdjwg S U Hsidwjt Type: Jungheinrich TFG 435s – Gas-powered front loader Drive type: Gas LPG Load capacity: 3,500 kg Lift height: 4,300 mm Load center: 500 mm Year of manufacture: 2018 Operating hours: 11,633 Mast type: Duplex Fork length: 1,200 mm Overall height: 2,871 mm Weight: 4,995 kg Attachments: Sideshift Front tires: Solid rubber Rear tires: Solid rubber

Condition: used, Year of construction: 2022, Used machine Year of manufacture 2022 Condition: like new Equipment and technical specifications: Holz-Her DYNESTIC 7535 10.5 Lift machining center Processing length 3100 mm Machine frame in welded construction with ground and hardened prism guides for the traveling column, unit head, and consoles Gantry-style traveling column Rack and pinion drive, helical gears, in the X and Y directions 1 ball screw in the Z direction for precise positioning MATRIX table Fixed, continuous machining table with grid divisions, continuous slots in the X and Y directions, 50 mm slot spacing with 25 meters of sealing cord for clamping the wear plate 1 machining area with stop bars / stop Height 30 mm, pneumatically lowerable. Two stop bars each in the Y direction and one stop in the X direction on the right (viewed from the front edge of the machine). Remote maintenance: Integrated network card for transferring control and program data. Data is transferred via a high-speed internet connection. Requirement: High-speed internet connection on the machine. USB port for data backup or for directly loading machining programs on the control panel. TECHNICAL DATA: Machining dimensions 7535 10.5: Max. support surface on nesting table: X = 3100 mm Y = 1560 mm Max. travel distances: X = 4695 mm Y = 2305 mm Z = 565 mm Max. machining height 7535/7735 Classic without pusher Z = 300 mm from table top edge (without wear plate) Max. overtravel height of the pusher over the table of the Push/Auto/Lift versions: Z = 250 mm from table top edge (without wear plate) Maximum programmable speed Vector speed: 128.0 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min MACHINE OPERATION: SOFTWARE CAMPUS V7 Plus CAD/CAM Software 1 license including material removal simulation 1 pc. Software license secured via license plug for the machine CAMPUS V7 PLUS, software for CNC machining centers Consists of: 1. CAMPUS NC-HOPS 2. CAMPUS aCADemy 3. CAMPUS MT-Manager 4. CAMPUS Workcenter V7 PLUS = 5. CAMPUS 3D material removal simulation BetterSim CAMPUS NC-HOPS Graphical variant system with WOP and CAD/CAM features for creating part variants using macro technology CONTROL Incl. ECO MODE - time-controlled shutdown of drive and control components to save energy Windows-based industrial PC controller Intel Core i5-6600 8 GB RAM 256 GB M.2 (NVMe SSD) 24V DC industrial standard Electronic stop monitoring for all selected stop bars or stop bolts on the machine. Safety device to prevent damage to the stops. Handheld control unit for remote control of the machine (13 m) with the following operating functions: > Start/stop of the machining program Duebvdswhukgoidwot > Speed control of the machining cycles > Reset button > Manual feed/rapid traverse for all axes > Emergency stop Control panel with 21.5" 16:9 touchscreen Capacitive multi-touch screen for intuitive operation - Continuous glass surface - Includes wireless

Condition: good (used), Year of construction: 1986, machine/vehicle number: #118, Dear customers currently we offer a used bandsaw of the brand F. Zimmermann. Here are the technical data of the machine: Table: 1.000 x 895 mm Cutting width: 775 mm Super cutting height: 640 mm Swivelling of table: 45/10° Duobvdowhn Aveidwot Diameter of the pulley: 800 mm Power: 4 kW Speed: 1.500 U/min Cutting Speed: 1.400 U/min - motor brake Dimensions: 1.370 x 850 x 2.950 mm Weight: approx. 850 Kg If you have further questions feel free to ask us. We are looking forward to your inquiries!

Condition: used, Year of construction: 2022, operating hours: 164 h, load capacity: 3,500 kg, lifting height: 6,700 mm, free lift: 2,160 mm, mast type: triplex, power: 17 kW (23.11 HP), fork carriage width: 1,150 mm, ground clearance: 110 mm, front tire type: Trelleborg, front tire size: 315/45-12, rear tire type: Trelleborg, rear tire size: 18x7-8, total length: 4,850 mm, wheelbase: 1,800 mm, drive type: Elektro, construction width: 1,420 mm, net weight: 4,561 kg, - Bedienung Sitzgerät - Tragfähigkeit/Last 3500kg - Lastschwerpunkt 500 mm - Lastabstand 468 mm - Achslast mit Last vorn/hinten kg 8042/958 - Achslast ohne Last vorn/hinten kg 2662/2838 - Spurweite vorn/hinten mm 1002/900 - Neigung Hubgerüst/Gabelträger vor/zurück ° 7/7 - Arbeitsgangbreite bei Palette 1000 x 1200 quer mm 3941 - Arbeitsgangbreite bei Palette 800 x 1200 längs mm 4141 - Wenderadius 2273 mm - Kleinster Drehpunktabstand 649 mm - Fahrgeschwindigkeit (Blue-Q/Standard/Sprint) mit Last km/h 18/18/20 - Fahrgeschwindigkeit (Blue-Q/Standard/Sprint) ohne Last km/h 18/18/21 - Hubgeschwindigkeit (Plus*//Standard Performance) mit Last m/s 0,53//0,44 - Hubgeschwindigkeit (Plus*//Standard Performance) ohne Last m/s 0,57/0,51 - Senkgeschwindigkeit mit Last m/s 0,50 - Senkgeschwindigkeit ohne Last m/s 0,43 - Zugkraft (Plus*//Standard Performance) mit Last N 10300/7590 - Zugkraft (Plus*//Standard Performance) ohne Last N 10650/8015 Debvovdxnpedidwsut - Max. Zugkraft (Plus*//Standard Performance) mit Last N 20900/16920 - Max. Zugkraft (Plus*//Standard Performance) ohne Last N 20290/17170 - Steigfähigkeit (Plus*//Standard Performance) mit Last % 17,8/12,9 - Steigfähigkeit (Plus*//Standard Performance) ohne Last % 28,2/21,9 - Max. Steigfähigkeit (Plus*//Standard Performance) mit Last % 24,2/20,6 - Max. Steigfähigkeit (Plus*//Standard Performance) ohne Last % 2482/28,2 - Beschleunigungszeit 15 m (Plus*//Standard Performance) mit Last s 5,7/6,3 - Beschleunigungszeit 15 m (Plus*//Standard Performance) ohne Last s 5,0//5,4 - Betriebsbremse Hydraulisch betätigte Lamellenbremse - Umschlagleistung (Plus*//Standard Performance) t/h 258/245 - Energieverbrauch bei Umschlagleistung (Plus*//Standard Performance) kWh/h 8,6/8,0 - Arbeitsdruck für Anbaugeräte bar 250 - Ölstrom für Anbaugeräte l/min 55 - Schalldruckpegel LpAZ (Fahrerplatz) dB(A) 70 - Humanschwingung: Beschleunigung nach EN 13059 m/s² 0,57 - Anhängerkupplung, Art/Typ DIN Bolzen - Integrierte Ablagen und Getränkehalter - Anzeige- und Bedieneinheit mit Display, Funktionstasten und Menüführung (spritzwassergeschützt) - MSG 65 Grammer Sitz mit Kunstlederbezug - Haltegriff am Schutzdach vorn und hinten - Mehrhebelbedienung - 3 festgelegte und 2 frei konfigurierbare Fahrprogramme, Energiesparmodus Blue-Q, Sprintmodus für höchste Umschlagleistung auf Knopfdruck - Anzeige des Energieverbrauchs und der verbleibenden Fahrzeit bei aktuellem Batterieladestand - Lithium-Ionen-Batterie 1:1 austauschbar - Automatische Feststellbremse - Curve Speed Control - Intelligente Sitzgurtkontrolle mit Logik-Prüfung

Condition: new, Year of construction: 2023, spindle tilting: + 45,5° bis -45,5° height adjustment: electrically tilting adjustment: electrically fence adjustment: electrically altitude display: digital swivel angel display: digital fence display: digital spindle: MK 5 speeds: stepless 900 – 12000min¯¹ power consuption: 7,5 kw motor brake: yes, automatically Dusbvdijiqg N Nsdwjt suction connection: 3 x 100 mm, 1 x 120 mm machine length: 2540 mm machine width: 1195 mm weight: 950 kg

Condition: excellent (used), Year of construction: 2010, Arburg 570S 2200-1300 / Production line with the Arburg Multilift robot Duobvewig Tiodidwjt Year of manufacture: 11.2010 Injection unit: Screw diameter: 60 mm Injection weight: 607 g Injection pressure: 2000 bar Dosing volume: 664 cc Clamping unit: Clamping force: 220 t Bar spacing: 570x570 mm Clamping plate size: 795x795 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - touch screen Additional equipment: Production line with the Arburg Multilift robot Machine in very good technical condition Euromap 67 Robot interface Air valve x 3 Hydraulic core pull x 4 Control with hot runners x 12 Injection unit hardened - bimetal Proportional valve on the injection unit - precise injection The machine was regularly serviced in Germany Robot Arburg Multilift Year of manufacture: 11.2010 5-axis robot: 3 axes are driven by servo motors (electric); axis B (revolution), axis C - pneumatic Travel paths in axes: X-400, Y-800, Z-1800 Robot with adapter, conveyor belt and protective housing Purchase of the robot and conveyor belt for an additional charge Dimensions: Weight: 10090 kg Length/width/height: 5.89x1.90x2.228 m All machines offered are started by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to take part in live technical tests in our company in Łódź. Price: On request

Condition: used, overall weight: 45,000 kg, maximum load weight: 30,350 kg, axle configuration: 2 axles, loading space length: 12,500 mm, loading space width: 2,550 mm, loading space height: 300 mm, first registration: 06/2024, next inspection (TÜV): 06/2025, Year of construction: 2024, total width: 2,550 mm, total height: 300 mm, Equipment: ABS, DOLL tera 2-axle low bed semi-trailer removable neck and additionally driveable rear carriage first registered 06/ 2024, in new condition empty weight 14,650 kg total permissible weight 45,000 kg length of gooseneck 3,070 mm fifth wheel height 1,200 to 1,280 mm swing radius 2,350 mm length of low bed 6,800 mm Dusbvswhd Emodidwst length of telescoping 5,700 mm length of rear axle chassis 2,700 mm width of excavator arm trough 700 mm depth of excavator arm trough 550 mm loading height of low bed 300 mm loading height above the chassis 955 mm width of the trailer 2,550 mm hydraulic suspension -70 / + 530 mm Fifth wheel load technical 21,000 kg Axle load 24,000 kg Removable gooseneck with external main frame Trailer painted in 3 layers including spray galvanization Doll Tronic CAN bus system Floor in the low bed 45 mm spruce wooden planks between the flat bed frames 24-volt electric hydraulics Control of the trailer functions with DOLL keypads on the gooseneck ADDITIONAL STEERING with RADIO EEG Electronic tracking when driving straight ahead At the rear of the frame aluminum folding ramps with lifting mechanism, length 2,100 mm, width 600 mm, mechanical width adjustment, load capacity 20,000 kg LaSi in the low bed: 7 pairs of swiveling lashing eyes 13,400 daN lashing force 5 pairs of stake pockets in the outer frame 3 pairs of M36 threads on the outside for screwing in lashing brackets Chassis DOLL tera pendulum axles with hydraulically suspended axles BPW all axles hydraulically forced steered with max. 60° steering angle on the last axle all lubrication points are connected to the central lubrication system WABCO trailer EBS with ABS and RSS aluminum air tank BEKA MAX central lubrication system on the front and rear of the vehicle extra-wide package with foldable loading area extensions 2x 225 mm, warning sign package extendable to 3,200 mm wide tires 8-fold 245/70 R 17.5 RENTING is the new BUYING, immediately available from us in full-service rental-----

Year of construction: 2022, Condition: used, Screw compressor with receiver and refrigeration dryer Used Year of manufacture 2022 Compact screw compressor with variable speed control and innovative LOGIN control Technical specifications: Maximum pressure: 10 bar Effective delivery rate: 1,050 l/min Motor power: 7.5 kW Noise level: 62 dB(A) Dimensions: 1,200 x 650 x 1,540 mm Connection: 1/2" Receiver capacity: 270 l (AD2000) Weight: 295 kg Features Frequency controlled? Electronic control system; Oil heat exchanger? Compressed air receiver; Hot-dip galvanized inside and out; Drive transmission: Direct coupling; Star-delta connection; AD 2000 compliant; Yes; Availability: Approx. May 2025 Storage location: Bavaria Djbvdewhuk Heidwout

Condition: new, Year of construction: 2024, flue capacity: 175 kW Conventional yeld capacity: 140 kW flue diameter: 200 mm hot air delivery pipes: 3 x 250 mm Dsbvdidok Utrpowout flue length: 950 mm oven width: 600 mm oven hight: 860 mm air flow: 6300 m³/h power consumption: 8900 W aproximate surface to heat up: 2200 m³ area to be heated: 500/600 m² heater height without hot air conveying pipes: 2200 mm heater width: 930 mm heater length: 1700 mm weight: 615 kg

Condition: excellent (used), Year of construction: 2016, Arburg 570S 2200-290/100/100 / Production line with the Wittmann W823 robot / Operating hours: 20,499 h in automatic mode Year of construction: 2016 Injection unit: Screw diameter: 35 mm Injection weight: 132 g Injection pressure: 2000 bar Metering volume: 144 ccm Clamping unit: Clamping force: 220 t Distance between tie bars: 570x570 mm Size of the clamping platens: 795x795 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA touchscreen Additional equipment: 3-component injection molding machine, high speed Very good technical condition Operating hours: 20,499 h in automatic mode Euromap 67 Robot interface Air valve x 6 Hydraulic, needle core pull, controlled by a proportional valve x 4 Control unit with hot runners Hardened injection unit - bimetal Proportional valve on the injection unit - precise injection Machine with two cylinders / battery with compressed nitrogen (additional charge for fast work) The machine is designed for operation with an electric turntable. The machine has an inverter to control the servomotor in the rotary table and an interface for connecting the rotary table Parallel movements Screw diameter in the vertical injection unit: ⌀25 mm - 45 g/hp Screw diameter in the lateral injection unit: ⌀25 mm - 45 g/hp Debewig Tcevdidwsut Wittmann W823 robot Year of construction: 2015 5-axis robot: 3 axes are driven by servomotors (electric); axis C and movement A Travel in axes: X-550, Y-1400 (telescopic), Z-3500 Touch control panel The safety package for robots Robot with adapter, conveyor belt and protective housing Purchase of the robot and conveyor belt for an additional charge Dimensions Weight: 10830 kg Length/width/height: 5.53x1.77x3.29 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: used, overall weight: 38,000 kg, maximum load weight: 30,000 kg, axle configuration: 3 axles, loading space length: 12,000 mm, loading space width: 2,480 mm, loading space height: 2,445 mm, loading space volume: 70 m³, first registration: 08/2019, next inspection (TÜV): 01/2026, Year of construction: 2019, total width: 2,550 mm, total height: 3,950 mm, Equipment: ABS, H&W (Vreden) AGRAR- Walkingfloor 70 cbm in full equipment First registered 08/ 2019, from 1st hand Dimensions i.L. (LxWxH) 12,000 x 2,480 x 2,323/ 2,566 mm (conical design) Fifth wheel height 1,250 to 1,300 mm Total height 3,950 mm Debvdswhd Eyoidwsut SAF axles "Off-Road" with large disc brakes 430 mm WABCO trailer EBS with RSS stability program Chassis fine-grain steel, hot-dip galvanized Forced steering 1st and 3rd axle, TRIDEC system with rod steering 3x central lubrication points set on the outside Tires 445/65 R 22.5 (also available with field tires/low-pressure tires) Cargo floor AGRAR with 15-board system, reinforced version 10 mm RADIO remote control floor and rear wall flap Profile joints of the side walls completely welded from the inside (grain version) 2x reinforced crossbars Stainless steel wear plate at the rear under the floorboards Front wall with cleaning door Hydraulic connections on the front wall and also on the support legs HYDRAULIC REAR WALL FLAP, controlled via the radio remote control PNEUMATIC PARTITION POSITIONER RENTING is the new BUYING, ALSO immediately available from us in full-service rental-----

Year of construction: 1980, Condition: used, Joining height: 95mm Chip thickness: 0-8mm Debvdijpn Ny Esdwsut fence length without planing head: 1550mm fence extension: 600mm including 3 rollers feed wood stove: yes

Condition: excellent (used), Year of construction: 2010, Arburg 570H 2000-2100 with the Sepro Industrial Robot SDR 22S / Hybrid machine / Operating hours: approx. 29,000 h in automatic mode Year of construction: 2010 Injection unit: Screw diameter: 70 mm Injection weight: 984 g Injection pressure: 2000 bar Dosing volume: 1078 ccm Dusbjwig Sfevdidwot Clamping unit : Clamping force: 200 t Distance between tie bars: 570x570 mm Size of the clamping platens: 795x795 mm Ejector: hydraulic Clamping unit: toggle lever Control system: SELOGICA - touch screen Additional equipment: Machine in very good technical condition Hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 29,000 h in automatic mode Euromap 67 Robot interface Air valve x 2 Hydraulic core pull x 1 Air core pull x 7 Control unit with hot runners x 15 Hardened injection unit - Bimetal Main machine motor - Servomotor driven by inverter - Energy saving The injection unit is driven by a servomotor controlled by an inverter Parallel movements Central lubrication Automatic mold height adjustment Machine with two cylinders / battery with compressed nitrogen (additional charge for fast work) Built-in Arburg conveyor belt integrated with the machine control system Robot: Sepro Industrial Robot SDR 22S Year of construction: 2016 4-axis robot: 3 axes are driven by servomotors (electric); axis C - pneumatic Travel in axes: X-1500, Y-2200, Z-800 Vacuum x 2 Gripper x 2 Touch control panel Robot with adapter Purchase of the robot for an additional charge Dimensions Weight: 12390 kg Length/width/height: 7.20x1.77x2.32 m Drive: Pumps/motor: 0 kW Heating output: 0 kW Total output: 0 kW All offered machines are started by our service technicians before sale. It is possible to obtain a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: On request

Condition: as good as new (ex-display), Year of construction: 2022, Roller diameter: 600 mm Stand projection: 585 mm cutting depth: 370mm Table tiltable: yes 0 to + 20°. Table size: 890 x 620 mm belt speed: 18 m/min motor power: 2,2 kW / 400V Motor brake: yes / automatic Suction connection: 2 x 100mm Machine length: 1100 mm Djbvjhpl Tfjdidwsut Machine width: 670 mm Machine height: 2050 mm Weight: 295 kg

Condition: excellent (used), Year of construction: 2011, Arburg 520S 1600-290/100 / Production line with Wittmann W823 robot / Operating hours: 20,181 h in automatic mode Year of construction: 09.2011 Injection unit: Dusbvdowig Rbjidwst Screw diameter: 35 mm Injection weight: 132 g Injection pressure: 2000 bar Metering volume: 144 ccm Clamping unit: Clamping force: 160 t Distance between tie bars: 520x520 mm Size of the clamping plates: 695x695 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA touchscreen Additional equipment: 2K injection molding machine with rotary table and robot Very good technical condition Operating hours: 20,181 h in automatic mode Total number of operating hours: 28,473 h Euromap 67 Robot interface Air valve x 3 Hydraulic, needle core pull, controlled by a proportional valve x 2 Reinforced injection units - bimetal Proportional valves on injection units - precise spraying Machine with two cylinders / batteries with compressed nitrogen (additional charge for fast work) Parallel movements Screw diameter in the vertical spraying unit: ⌀25 mm - 45 g/hp Original turntable Purchase of the turntable for an additional charge Robot Wittmann W823 Year of construction: 2015 5-axis robot: 3 axes are driven by servo motors (electric); axis C and movement A Travel in axes: X-550, Y-1400 (telescopic), Z-3500 Touch control panel The safety package for robots Robot with adapter, protective housing Purchase of the robot for an additional charge Dimensions Weight: 6720 kg Length/width/height: 4.41x1.84x3.20 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: used, Year of construction: 1995, spindle tilting: yes-5 bis +45° height adjustment: electrically tilting adjustment: electrically fence adjustment: manual read out height: digital read out tilting: digital Duobvdioiqg N Tjdwet read out fence: scala spindle diameter: 30 mm speeds: 1500, 3000, 4500, 6000, 9000, 12000 U / min motor power: 5 / 6 kW motor brake: yes, automatically suction connection: 2 x 120 mm machine length: 1200 mm machine width: 1400 mm weight: ca. 950 kg

Condition: excellent (used), Year of construction: 2008, Arburg 520S 1300-800 / machine in very good technical condition Year of manufacture: 2008 injection unit: screw diameter: 50 mm injection weight: 359 g Injection pressure: 2000 bar Metering volume: 392 ccm Clamping unit: clamping force: 130 t tie bar distance: 520x520 mm size of clamping platens: 695x695 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA - touch screen Additional equipment: Machine in very good technical condition Euromap 67 Euromap 12 Dujbvdijwig Elodwet Robot interface Air valve x 2 injection unit hardened - bimetal The machine was regularly serviced by the authorized service Arburg in Germany Dimensions: Weight: 6450 kg Length/width/height: 4.81x1.57x2.19 m Drive: Pumps/motor: 30 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: new, Year of construction: 2024, Depth of cut at 90°: 200 mm Depth of cut at 45°: 140 mm Cutting width at 90°: 420 mm Cutting width at 45°: 295 mm Miter range horizontal: 45° -90° -25° Miter range vertically: 60° -90° -30° Dobvdioiy Ry Ajdwjut Sawblade diameter: 520 mm rpm: 2800 U/min Motor: 5 kW motor brake: yes suction plant diameter: 100 mm weight: 490 kg