Used Tabe Agb-95 for sale (13,192)

Condition: used, Year of construction: 2012, Serial number: SZFTN1490CLD0xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 20131 Specifications: - 2012 model - Eu-approved until: 19.10.25 - 3 Axles - Movable wall - Air suspension - Raise and lower function - Tires (see pictures) - Internal length: 6.608 m - Internal width: 2.495 m - Lashings - Ready for delivery Description: We have a 2012 Istrail 3 axle flatbed trailer for sale. The trailer is Eu-approved until 19.10.25 Is in daily use and functions as it should according to the owner. Ready for delivery Technical approved: Yes Duolrowdvc Necrg Hjt EU-approved until: 19.10.2025 Own weight: 6410 Total Weight: 27000 Payload: 20590 Width: 255 Length: 945

Condition: used, Forming area max. (length,width) / mm max. depth of product positive / mm max. depth of product negative / mm Technical specifications: Roll diameter approx. 420mm Dolrcrgowgi Sie Hsut Projection in width approx. 415mm Projection in height approx. 265mm Table size approx. 605 x 600 mm Belt speed 18 - 562 m/min. 8 levels Saw band length min./max. 3150 / 3260mm - Saw band speed over 4 gear stages and 2 engine speeds - Saw blade butt welder IDEAL BS 0-16 with scissors and whetstone - swiveling work table in 2 axes Dimensions: approx. L x W x H 950 mm x 750 mm x 1900 mm Weight 600kg with table feed Description has been adopted.

Condition: excellent (used), Vötsch Type: VC 7018 Vötsch Climatic Test Chamber VC 7018 Water-Cooled Touch Panel Control Unit On the touch panel control unit, all control and operating commands can be triggered by simply touching the function symbols. Adjustable Feet To compensate for uneven floors and ensure adequate ventilation of the machine section, the test chamber is equipped with adjustable feet. Ports The test chamber is equipped with port holes on the right and left sides. These allow measurement cables and test equipment to be routed into the test chamber. Feedthrough included in standard equipment R1: NW 125 mm L1: NW 50 mm Test chamber dimensions: Width 580 mm x Depth 450 mm x Height 750 mm Housing dimensions: Width 870 mm x Depth 1280 mm x Height 1745 mm Characteristics for temperature tests: Temperature range: -70°C to +180°C Temperature ±0.1 to ±0.5 K Spatial ±0.5 to ±2.0 K Temperature change rate according to IEC 60068-3-5 Heating: 4 K/min Cooling: 2.3 K/min Characteristics for climatic tests: Temperature range: -10°C to +95°C Humidity range: 10% to 98% r.h. F. Temperature deviation over time in the center of the usable space ± 0.1 to ± 0.3 K Temperature deviation over space ± 0.5 to ± 1.0 K Temperature gradient 1 to 2 K Humidity deviation over time in the center of the usable space ± 1 to ± 3 %RH Electrical connection: Nominal voltage: 3/N/PE AC 400V ±10 50Hz Nominal power: 5.9 kW Nominal current: 12.0 A Connection cable: 3.5 m Fuse protection: 16 A slow-blow, provided by the customer Refrigerants: R-404A and R-23 Test chamber capacity: approx. 190 liters Weight: approx. 460 kg net For your safety, the following information is provided as a buyer! Djlrewgaykscrg Hjut The following steps are performed on our offered chambers in advance: 1. Functional testing and replacement of necessary components 2. Refilling with legally compliant refrigerant, if necessary 3. Leak testing with a certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: used, Year of construction: 2021, Cutting length: 3.800 mm Pusher stroke: 3.800 mm Number of grippers: 6 Feedrate max: 120 m/min Continuously variable feed: Yes Saw blade projection: 65 mm Dslrcrgswab Tfj Heut Saw blade diameter max: 320 mm Main motor power: 7,5 kW Scoring saw: Yes, Motoric adjustment Labelling: manually HOMAG PICA II 103: Yes For sensible workpieces: Clamping pressure adjustable Stop side: Right side HOLZMA Central side aligner: Yes Control: HOMAG CADMATIC 5, HOMAG POWER CONTROL Software: HOMAG tapio ready Conformity marking: CE mark Space requirement Length: 6,65 m Space requirement Width: 5,87 m Space requirement Height: 1,95 m

Condition: used, Year of construction: 2001, Suitable for automatic grinding of HM circular saw blades on both the front and back. All known tooth geometries (flat, alternating, trapezoidal tooth, etc.) can be ground in one pass. Accessories: Full machine enclosure, wet grinding device, motorized chip and clearance angle adjustment, manual central lubrication, grinding mist extraction, machine light, 1 set of tools for measuring (setting gauge, measuring device for the grinding wheel, feed finger gauge), 1 used grinding wheel for back grinding. Djlrcrgswgbd De Heut Circular saw blade diameter: 80 - 500 mm Sheet thickness: up to max. 5 mm sheet thickness: up to max. 5 mm Tooth pitch: 7 - 100 mm grinding path (carbide length): up to max. 10 mm rake angle: -30° to +50° clearance angle: 6° to 45° Bevel grinding on the tooth face: up to 30° Grinding speed continuously adjustable: from 0.5 - 20 mm/sec., Grinding wheel diameter: 125 mm Grinding wheel bore diameter: 32 mm Compressed air requirement approx.: 6 bar Connected load approx.: 3 kW (400 V / 50 Hz) Weight approx.: 950 kg Dimensions W x D x H: 1250 x 920 x 1870 mm colour: Color turquoise blue RAL 5014 / gray RAL 7035 Grinding path (carbide length): up to max. 10 mm

Condition: used, Year of construction: 2011, total width: 1,850 mm, total length: 4,800 mm, total height: 1,950 mm, outer dimension width: 1,850 mm, outer dimension length: 4,800 mm, Empty weight: 3.000 kg Price: On request - Motor power [kW]: 1.5 - Max. workpiece length [mm]: 4100 - Max. workpiece width [mm]: 1500 - Number of cylinders [pcs]: 8 - Cylinder diameter [mm]: 60 - Plate material: minium - Year: 2011 - Documentation available: No - CE mark available: Yes - Serial number: F1440111 - Voltage [V]: 400 - Transport dimensions: 4800mm x 1850mm x 1950mm (l x w x h) - Transport weight [kg]: 3000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Peter Stroomberg Dslrcrewf Eudeg Hout

Condition: used, mileage: 101,370 km, Year of construction: 2023, Serial number: YV2XT40C0NA30xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 20129 Specifications: - 2023 model - 101,370 km (will increase) - Eu-approved until: 01.02.26 - Euro 6 - 510 hp - 6x2 - Automatic transmission - Interior length on plan: 6,474 m - Interior width on plan: 2,485 m - Front suspension: air suspension - Rear suspension: air suspension - Air conditioning/ac - Lights - Heating in tool cabinet - Diesel heater Dujlrcswdvcierg Het - Heating in mirrors - Gold agreement - Service history - Ready for delivery Specifications HMF crane: - 2023 model - 32 t/m crane - Certified until: 12.25 - Remote control - 2.5 ton winch - 8 hydraulic extensions - 4 outriggers - 2 Manual extensions - Arrangement for grab and rotator - Ready for delivery Description: We have a Volvo FM500 6x2 flatbed truck w/ 32t/m HMF crane for sale. The truck works as it should and is EU approved until 01.02.26 It has a gold agreement so full service history and can be documented. Ready for delivery Km: 101370 HK: 510 Technical approved: Yes EU-approved until: 01.02.2026 Own weight: 17090 Total Weight: 29500 Year controlled until: 12.25 Payload: 12335 Width: 255 Length: 1032 Euro: 6 Gearbox: Automatic

Condition: used, Year of construction: 1971, roll diameter / mm throat / mm workpiece height / mm table-size 800x750 mm Technical specifications: Roll diameter approx. 420mm Projection in width approx. 415mm Projection in height approx. 265mm Table size approx. 605 x 600 mm Belt speed 18 - 562 m/min. 8 levels Saw band length min./max. 3150 / 3260mm - Saw band speed over 4 gear stages and 2 engine speeds - Saw blade butt welder IDEAL BS 0-16 with scissors and whetstone Dujlswgi R Sorcrg Hot - swiveling work table in 2 axes Dimensions: approx. L x W x H 950 mm x 750 mm x 1900 mm Weight 600kg with table feed Description has been adopted.

Condition: used, Year of construction: 2005, operating hours: 7,863 h, 2005 | Manitou | Manitou 160 Atj (16 meters) | Used Articulated Boom Lift | 7863 hours 📍Location: France, Gannat 🚛 We Deliver to your destination – Estimate the shipping cost with our calculator! 💰 Buy Now for EUR 18000 or Make an Offer. Request payment at delivery for an affordable fee! (subject to approval)* 👷‍♂️ Inspected by an independent expert 47 inspection points 46 approved ✅ 1 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Good working condition, with a little play in all joints. The motor was replaced 2000 hours ago. See details below. ❓Want the Full Inspection Report, Extra Photos & a Video? 🔍 Search this on Google for full details!: "37955 Equippo" 💡 Why Buy from Us? ✔ Fully inspected machines ✔ Delivered to your jobsite Djlrcewgga Djrg Hsut ✔ Money-Back Guaranteed ✔ Safe payment methods with possibility to pay at delivery ❓Got machines to sell? Contact us for a free evaluation

Condition: ready for operation (used), KSB ETACHROM BC block pump, SN:6-9531327631 + 1LA7096-2AA11-ZX66 three-phase motor, used, normal signs of use, 100% functional, scope of delivery as per photos Dolrcsi D Iz Rjrg Heut

Condition: used, Used stainless steel cutter/mill by Urschel Laboratories (USA) Comitrol Processor model 1700. Machine is designed for size reduction of free-flowing, dry and semi-dry, products and is equipped with microcut head. Urschel Comitrol Processor 1700 is able to work on three types of heads - slicing head, cutting head or microcut head. Machine is driven by 22,3 kW, 2955 rpm, 380 V, 50 Hz electric motor. Dslrcerdgxberg Hout Cutting chamber is sealed and deters escape of dust, vapor and liquid. Includes switchboard and control panel. Dimensions are approximately 1300 mm length x 900 mm wide x 1800 mm high, weight approx 500 kg.

Condition: used, mileage: 116,575 km, Year of construction: 2010, Serial number: ZCFA75D040256xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 20215 Specifications: - 2010 model - 116575 km - Eu-approved until 17.09.25 - Euro 5 engine - Manual - 177 hp - 4x2 - Front suspension: steel - Rear suspension: steel - Tires (see pictures) - Exterior handle on passenger side does not work. - One side pillar cannot be dismantled (rusted) - Air conditioning/ac - Lights - Radio - Ready for delivery Description: We have a 2010 Iveco Eurocargo 4x2 Flatbed for sale. Dujlrcrswdvaneg Het The car is Eu-approved until 17.09.25 and can be put straight into production. Error message in dashboard should be related to exterior lights according to owner. Some additional costs must be included. Ready for delivery. Km: 116575 HK: 177 Technical approved: Yes EU-approved until: 17.09.2025 Own weight: 3920 Total Weight: 7490 Payload: 3495 Width: 254 Length: 595 Euro: 5 Gearbox: Manual

Condition: ready for operation (used), Pumpen-Berthold CHI 4-60A-W-G-BQBE universal pump SN:0795157, used, normal signs of use, 100% functional, scope of delivery as per photos Duslrcrgji D Na No Hst

Condition: used, Used carbon steel grinding mill by Pallmann (Germany) model PR8. Mill has bolted rotor with diameter 795 mm and stator with diameter 800 mm. Belt driven by el. motor 100 kW, 1480 rpm, 380 V, 50 hz. Manual adjustment of gap between milling plates. Mill has mounted 5 nozzles for feeding gas or liquid inside the milling chamber. Duelrcrgjvtqmce Hst Front door bolted with central feeding inlet through feeding chute. Bottom discharge.

Condition: new, Dittel Marposs WB HEAD-ST50X120 / FC NP TF 0950 / O3PL2024504 Electromagnetic built-in balancing head, SN:O14LW1379, unused, 100% functional, scope of delivery as per photos Duolrcrgsi D Upvj Het

Condition: new, Umbra Group / Kuhn ball screw drive total length: 1900 mm, thread length: 1460 mm, thread diameter: 80, pitch: 10 mm, nut: 105 mm, flange diameter: 145 mm, bolt circle: 125 mm, paragraph 1: length: 195 mm, diameter 60/50 mm, thread: M60 x 2 mm, paragraph 2: length: 165 mm, diameter 60/56 mm, thread: M50 x 1.5 mm, unused in opened original packaging, 100% functional, scope of delivery as per photos. ATTENTION: Please enquire for charges for packing and transport separately! Duslrcrgovtiufe Hot

Condition: new, Pneumatically operated chuck, clamping Ø 50 mm, manufacturer unknown, outer Ø 142/95/92 mm, inner Ø at connection 18.5 mm, unused, as new condition, 100% functional Duelsudrr Aorcrg Hst

Condition: new, Bosch SE-LB3.075.030-10.000 brushless servo motor No. 1070915095 SN:569 + Heidenhain ROD 426.0013-5000 encoder. 254 048 34 SN:5863381A, motor has signs of storage, unused, 100% functional, scope of delivery as per photos Dolrcrei D Hfleg Hsut

Condition: new, Umbra Group / Kuhn ball screw drive total length: 1900 mm, thread length: 1460 mm, thread diameter: 80, pitch: 10 mm, nut: 105 mm, flange diameter: 145 mm, bolt circle: 125 mm, paragraph 1: length: 195 mm, diameter 60/50 mm, thread: M60 x 2 mm, paragraph 2: length: 165 mm, diameter 60/56 mm, thread: M50 x 1.5 mm, unused in opened original packaging, 100% functional, scope of delivery as per photos. ATTENTION: Please enquire for charges for packing and transport separately! Duolrcrsvtiulsg Hot

Condition: new, Warner Electric ball screw drive total length: 2280 mm, thread length: 2000 mm, thread diameter: 50 mm, pitch: 10 mm, paragraph 1: length: 180 mm, diameter 30/26 mm, paragraph 2: length: 115 mm, diameter 40/37.5 mm, hexagon: SW 32 mm, bolt circle: 95 mm, nut diameter: 75 mm, flange diameter: 110 mm, unused, 100% functional, scope of delivery as per photos. ATTENTION: Please enquire for charges for packing and transport separately! Duolsvtiw Torcrg Hst

Condition: new, Dittel Marposs WB HEAD-ST50X120 / FC NP TF 0950 / O3PL2024504 Electromagnetic built-in balancing head, SN:O14LW1381, unused in opened original packaging, 100% functional, scope of delivery as per photos Djlrcrji D Upyjg Heut

Condition: ready for operation (used), Refu 402/60-1DA10 frequency converter SN:9700-0395-0003, the frequency converter was overhauled by REFU, used, normal signs of use, 100% functional, scope of delivery as per photos Delrei Ecmhscrg Heut

Condition: ready for operation (used), MMK ZKV170/55-25-08 drawbar L = 1070 mm, flange diameter: 155 or 205 mm, tube diameter: 62 mm, tube length: 595 mm, used, normal signs of wear, 100% functional, scope of delivery as per photos ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Dujlroi Eb Rfecrg Hot

Condition: ready for operation (used), unipo 2TT1205CDN00 monitor unit TFT 12.1" consisting of 7FPT1462X503 12" UFP display unit + 7BXG0950GH01 UFP control unit, serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Dslrcrgovtiuxs Hsut

Condition: new, Umbra Group / Kuhn ball screw drive total length: 1900 mm, thread length: 1460 mm, thread diameter: 80, pitch: 10 mm, nut: 105 mm, flange diameter: 145 mm, bolt circle: 125 mm, paragraph 1: length: 195 mm, diameter 60/50 mm, thread: M60 x 2 mm, paragraph 2: length: 165 mm, diameter 60/56 mm, thread: M50 x 1.5 mm, unused, 100% functional, scope of delivery as per photosATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Delrevtiurecrg Hsut