Used Icm Deluxe 350 for sale (12,269)

Condition: excellent (used), Year of construction: 2017, Wittmann Battenfeld EcoPower 110/350 with the Wittmann W818 robot / Electric machine / Operating hours: approx. 16,000 in automatic mode Year of manufacture: 2017 Injection unit: Screw diameter: 35 mm Injection weight: 153.8 g Injection pressure: 2083 bar Dosing volume: 169 cc Clamping unit: Clamping force: 110 t Bar spacing: 470x420 mm Size of the clamping plates: 680x660 mm Ejector: electric Clamping unit: toggle lever Control: UNILOG B8 - touchscreen Additional equipment: Perfect technical condition Electric machine: high-speed, energy-saving and very quiet Operating hours: approx. 16,000 in automatic mode Euromap 67 Robot interface Control with Air valve Hydraulic core pull x 1 Control with hot runners Injection unit is wear-resistant and resistant to corrosion Central lubrication Automatic tool height adjustment Parallel movements The machine was serviced in Germany Robot Wittmann W818 Year of manufacture: 2015 4-axis robot: 3 axes are driven by servo motors (electric); axis C - pneumatic Travel paths in axes: X-420, Y-1200, Z-2000 Touch control panel The safety package for robots Robot with adapter, conveyor belt and protective housing Purchase of the robot and the conveyor belt for an additional charge Dimensions: Weight: 4800 kg Length/width/height: 4.91x1.42x2.10 m Bolq D Eowcm I Hsi Aowl All machines offered are started by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to take part in live technical tests in our company in Łódź. Price: On request

Condition: as good as new (ex-display), Year of construction: 2025, IE 3 engine as standard maximum flow rate up to 10,000 m³/h to the fan about 73 m m² filter area Pre-filter as standard 71 dB (A) at full load (according to DIN EN ISO 11201) Certified according to GS-HO-07 H3 residual dust content 0,1 mg / m ³ safely complied (wood dust) Models with construction pattern tested rotary valves (FSA) Approved non-return valve Bwjlq Dodqzhho Ei Ajl Built-in automatic fire extinguishing system 350 + P Intake manifold 355 mm Rated motor power 15.0 kW/3Ph Voltage 400 V / 50 Hz maximum volume current 10,000 m³/h Nominal flow rate * 7.127 m³/h Depression at Vnom. 3.347 PA Filter area 73 m² Chip collecting volume (net / gross) 3 x 165 L / 3 x 241 L Sound pressure level * 72 dB (A) Dimensions (L/W/H) in mm 3,112 x 1,058 x 2.361 Weight 1,074 kg

Condition: like new (used), Year of construction: 2003, operating hours: 66,000 h, Horizontal Injection Moulding Machine brand Demag. 350 tons of clamping force. Year 2003. 66.000 working hours. Screw diameter: 70mm. Extra: Robot Wemo 8-5 FS (2008) Safety fencing and 2 Conveyor belts. Machine will be delivered RE-Conditioned (Full checked tested and operative) and we can offer the start up in factory with warranty of working condition. Technical details YEAR OF BUILDING 2003 Belqsqa Ahro D Ei Aowl WORKING HOURS 66000 CLAMPING FORCE 3500 kN DISTANCE BETWEEN TIE BARS (h x v) 710x630mm MIN. MOULD HIGHT 330/710mm TRAVEL OPENING 675mm INJECTION VOLUMEN 1212 cm3 SCREW DIAMETER 70mm

Condition: good (used), Year of construction: 2000, Chipper with horizontal feed , but vibrating chute is not included Bwelsk Twl Toq D Ei Aol working width 350 mm Motor rotor 30 kw

Year of construction: 2007, Condition: ready for operation (used), This Arburg Allrounder 820 S 4000-1300/350 was manufactured in 2007. It is a hydraulic injection moulding machine, ideal for precision and efficiency in plastic processing. Contact us for more information about this machine. Application Types Injection Moulding Bwjlq Dov T D R Ij Ei Ajl

Condition: new, ELMAG Stone cutting machine (incl. slide) STM 600/350, 230 Volt Bwolq D Eist Hvlgo Aol STM 610/350 The impressive stone cutting machines deserve a closer look due to their robustness, perfect handling and, last but not least, a very good price/performance ratio. It simply cuts everything: tiles, exposed aggregate concrete slabs, paving stones, marble and granite, bricks, clinker, artificial stone ... Ideal for construction companies, gardening firms and pavers. ADVANTAGES Lockable spring tensioner for resetting in two saddle bearings S1 water pump Disc cooling with metering valve Powerful drive motor 2.2 kW / 230 V Safety switch with zero-voltage release Long service life: roller table steel rollers above water Precise: Adjustable longitudinal stop, measuring scale Unsurpassed cutting unit for very large cutting depth in reverse cut. Includes segmented diamond blade for universal use TECHNICAL DATA Cutting capacity depth/length 105 / 600 mm Diamond blade Ø 350 mm Diamond blade bore 25.4 mm Rated power 2.2 kW Voltage/frequency 230/50 V/Hz Dimensions 1130x570x1600 mm Weight 72 kg

Condition: excellent (used), Year of construction: 2020, Functionality: fully functional, machine/vehicle number: 20-00220, Werth, Scope Check FB/D2400/500/350, 3D CNC coordinator measuring machine complete with Werth CPU console, monitors and keyboard, serial number: 20-00220, year of manufacture: 2020 Belqewcla Uj D Ei Aowl

Condition: good (used), soundproof cabin very stable construction built for 2-sided planer Bslq D Ejkd I Hkji Aowl Kupfermühle DOMA 860 and other machines

Condition: new, Year of construction: 2025, Functionality: fully functional, The SEGA 315 professional squaring machine, with a 3200 mm carriage, 315 mm blade and a scoring unit equipped with a separate motor. The main, three-phase, 7.5-hp motor offers powerful and reliable performance for a variety of jobs. Among its distinguishing features, the Saw 315 features a parallel guide on a round bar with cast iron support and micrometric adjustment, blade lifting and tilting via handwheels, a tilting blade assembly with integrated scoring unit, an aluminum carriage with ball-bearing slide, and a guide on an extendable frame with two reversible stops. Automatic blade lifting on request. The Saw 315 represents an advanced choice for those seeking precision, power and versatility in woodworking. The SEGA 350 is the SEGA 315 but mounts a 350mm blade; to be CE, the bridge suction system must also be fitted. Beljuzxk Aoq D Ei Aowl The machine complies with the latest CE regulations, ensuring high safety and quality standards. TECHNICAL DATA: Main worktop mm 910×550 350×30 Additional working surface mm 910×760 Additional side working plane mm 500×550 Main blade speed rpm 4000 Scoring speed rpm 8000 Blade diameter mm 300×30 350×30 Scoring dimenter mm 120×20 Cutting height at 45° mm 75 92 Cutting height at 90° mm 100 120 Max cutting distance between blade and scale mm 1250 Carriage dimensions mm 3200 Three-phase motor power HP 5.5 Scoring motor power kW-HP 1.0-0.75 Weight kg 570 580 Packing size mm 2220x1030x1150 Wagon packing size mm 3560x420x210 LIST PRICE SAW 350 7.340€ EXCLUDING VAT LIST PRICE SAW 315 6,500€ EXCLUDING VAT

Condition: good (used), Core for crane traverse, adjustable traverse, crane traverse, hall crane, crane hook traverse, load traverse, heavy load traverse, -Heartpiece: for crane traverse, sheet metal upper traverse .: 1031 4140 G-12-02-02 -Dimensions: see photos -Quantity: 2 pieces available Bwolq D Eev Hm Szji Asl -Price: per piece -Transport dimensions: 350/180/H310 mm -Weight: 17.7 kg/piece

Condition: excellent (used), power: 280 kW (380.69 HP), fuel type: diesel, color: yellow, Year of construction: 2022, operating hours: 6,235 h, Equipment: air conditioning, General information Field of application: Construction VIN: T4427 Serial number: CAT00350PWDP00238 Technical information Track width: 60 cm Empty weight: 47.900 kg Make of engine: C9.3B Functional Bucket capacity: 2,2 m³ Bweljv Tuhdoq D Ei Aol Condition Technical condition: very good Visual appearance: very good Other information Emission level: Stage IIIA / Tier III Delivery terms: EXW Transport dimensions (LxWxH): 1,188x3,34x3,4 Production country: CN Additional information Please contact Francisco Pinto, Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information

Condition: used, SNOL Type: SNOL 120/350 SNOL heat and drying cabinet up to 350°C Description: SNOL high-temperature drying cabinet 120/350 For industrial applications. Max. 350°C Internal volume 120 liters Internal dimensions 555x350x555 mm 400 volts, 50 Hz, 6 kW Bwslq D Eievyfzze Ajl Vertical air circulation through built-in fan Overtemperature protection Chamber made of stainless steel Door hinge on the right, including two shelves Low power consumption Fast heating and cooling times Powder-coated housing RAL 7035 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is reserved!) We will be happy to answer any further questions you may have over the phone.

Condition: used, Technical details: Bjlju Nk T Soq D Ei Aowl faceplate diameter: 350 mm width: 80 mm boring diameter: 50 mm weight of the machine ca.: 32,0 kg dimensions: 350x125 mm face slide with 4 internal/outer clamping chucks (clamping travel 80mm) clamping area internal: dia 110-350mm and external dia. 40 -300mm flange intake dia. 130mm *

Year of construction: 2003, Condition: ready for operation (used), Three identical Gullco electrode ovens are available for drying and stabilizing welding electrodes. Internal dimensions X/Y/Z: approx. 350mm/400mm/480mm, max. electrode length: 450mm, max. temperature: 550°C, power consumption: 1.5kW, machine dimensions X/Y/Z: approx. 560mm/560mm/620mm, weight: approx. 160kg. Documentation available. On-site inspection is possible. Bolq Dev Np U Ro Ei Aswl

Condition: new, Year of construction: 2022, Functionality: fully functional, cooling capacity: 320 kW (435.08 HP), type of input current: three-phase, overall weight: 3,843 kg, ambient temperature (max.): 40 °C, ambient temperature (min.): -25 °C, input voltage: 400 V, volume flow: 55 m³/h, frequency: 50 Hz, total width: 2,210 mm, total length: 4,600 mm, total height: 2,500 mm, noise level: 65 dB, protection type (IP code): IP54, HITEMA INTERNATIONAL CHILLER TFVF.350 FREE COOLING CAPACITY 320KW ATTENTION: > R-1234ze refrigerant type > This refrigerant is classified in group 2 'non-hazardous' according to the criteria of the Pressure Equipment Directive (PED) 97/23 / EC and 2014/68 / EC. According to IS0-817, the R-1234ze is classified in the A2L security group > Local codes the construction and safety standards must be respected Bwjlqjv Rmdrj D Ei Ajl > In the absence of local codes and standards, consult the guide to EN-378 (2017) (safety requirements for substances classified as A2L) or IS0- 5149 (2014) (for substances classified as A2L) > It is the responsibility of the installer to obtain approval from the local construction authorities

Condition: good (used), Container turning device, welding turning device, roller stand -Roller stand: wheels Ø 125 x 35 mm -Roller spacing: 140 mm -Quantity: 1 piece available Bwolq D Eov A Sztsi Aol -Dimensions: 350/80/H170 mm -Weight: 6.6 kg

Condition: excellent (used), Year of construction: 2010, Rough 350 Year of construction: 2010 X-path: 565 mm (+265 / -300mm) Y-path: 784 mm (+565 / -219mm) Z-path: 800 mm Control system: Siemens 840D Solutionline Max. Spindle speed: 16,000 min/-1 Tool holder: HSK-63 Belqorgq Dkj D Ei Aswl Pallet size: 400 x 400 mm Number of pallets: 2 Number of tool positions: 44 + additional magazine with 99 tool places Machine weight approx. 17 tons Machine documentation Chip conveyor Internal coolant supply Measuring probe: m+h IRP 25.41 Spindle hours: Spindle was replaced in January 2019 WITHOUT tools

Condition: good (used), Year of construction: 2009, machine/vehicle number: HD 10906347, pressure: 350 bar, overall weight: 850 kg, rotational speed (max.): 1,500 rpm, power: 35 kW (47.59 HP), Equipment: type plate available, Used high pressure pump. Technical specifications: Year of manufacture: 2009 Type: RS716E/350 Serial number: HD 10906347 35 kW 350 bar 1500 1/min 47 l/min With Küenle KDGN 225S4 NV 400 / 690V 67.2 / 39A 50Hz 37kW Bolotuqmkoq D Ei Aswl 1475 1/min Condition: used (see pictures and nameplates) Scope of delivery: 1 pump

Condition: used, Year of construction: 2000, faceplate diameter 3200 mm swing diameter 3500 mm turning height 2200 mm range L-W-H 7730 x 6240 x 6700 mm control Typ 840 D sl voltage 3 x 400 V frequency 50 Hz turning speeds 0,8 - 40 U/min max. turning diameter 3500 mm total power requirement 51 kW weight of the machine ca. 86 t Technical specifications Machine type: CNC vertical lathe Manufacturer: Rafamet Year of manufacture: 1973 conventional General overhaul with control retrofit 2010 Control upgrade 2016 Control: Siemens 840 D Sl Condition: very good faceplate Turning diameter of the faceplate 3,200 mm Number of rotation stages of the face plate 3 (infinitely variable) Speed ??ranges of the faceplate 0.8 - 40 rpm Level I 0.8 – 3 rpm Level II 0.8 - 11 rpm Level III 0.8 – 40 rpm processing of workpieces Max. turning diameter 3,500 mm Max. turning height of the workpieces above the faceplate 2,200 mm vertical supports Smallest axis distance between the vertical supports 470 mm Largest ram travel of the left vertical support 985 mm Largest ram travel of the right vertical support 985 mm Axis Feeds - Infinitely variable feed Max.: X1.2 3m/min max.: z1.2 2.5 m/min Plunger cannot be pivoted Support — crossbar Rapid feed of the cross beam 600 mm/min Larger distance of the cross beam to the faceplate 2,300 mm load sizes +Permissible turning force when turning workpieces with a turning diameter of 2,000 mm and a turning speed of 20 m/min. 8,000kg +Largest chip cross-section for workpieces made of steel Fz = 50 kg/mm² at a turning speed of 20 m/min for all supports 45 mm² +Largest chip cross-section for workpieces made of steel Fz = 50 kg/mm² at a rotation speed of 20 m/min for a vertical support with max. plunger length 985 mm 2.5 mm² +Largest chip cross-section for cast iron workpieces HB = 160 kg/mm² at a turning speed of 20 m/min for all supports 120 mm² +Largest chip cross-section for cast iron workpieces HB = 160 kg/mm² at a rotation speed of 20 m/min for a vertical support with max. plunger length 985 mm 22.5 mm² +Largest permitted workpiece weight at 0.8 - 3.15 rpm 17,500 kg +Largest permitted workpiece weight at 4 - 40 rpm 7,500 kg electric motors Main drive motor power and revolutions 51 kW Power of the feed motors of: - Vertical support beam (2 pieces) 16 Nm (gear 1:10) - Tappet (2 pieces) 16 Nm (gear 1:12) Power and revolutions of the drive motor of the hydraulic pumps (2 pieces) 3kW - 1,500 rpm Power and revolutions of the clamp hydraulic motor of the vertical support beam 1.5 kW - 1,500 rpm Power and rotation for crossbar adjustment 15 kW - 1500 rpm 3.5 Information on the compressed air supply and other consumables Compressed air connection: 6 bar free of oil and water 3.6 Energy Consumption Conditions Voltage: 3 x 400V Control Voltage: 24V Frequency: 50Hz Fusing: 315 A Main dimensions and weight of the machine Length 7,730mm Width 6,240mm Height: 6,700mm Weight: 85,750 kg Tool: Capto 60 recording Not powered Bslqeuddcgo D Ei Ajwl front panel Turning diameter of the front plate 3,200 mm Clamping disc diameter 3,400 mm Number of rotation levels of the front panel 3 (continuously adjustable) Front panel speed ranges 0.8 - 40 rpm Level I 0.8 - 3 rpm Level II 0.8 - 11 rpm Level III 0.8 - 40 rpm processing of workpieces Max. turning diameter 3,500 mm Max. turning height of the workpieces above ...

Condition: excellent (used), MRS 350 multi-saw - feed band width 35cm - max. cutting height 13cm Bslqop Audxs D Ei Aewl - main engine 37kW - smooth adjustment of feed speed - max. saw size 400mm

Condition: used, Year of construction: 2001, Clamping force: 350 t Platten dimensions: 1040 x 950 mm Distance between tie bars: 710 x 630 mm Screw diameter: 50 mm Shot weight: 400 g Shot volume: 442 cm3 -2 core pullers -2 air valves, controllable hot runners: 1-16 chanel -1 kaskade Bjlova Ht Seq D Ei Aowl Type: Horizontal Drive: Hydraulic

Condition: excellent (used), Flat gear motor, gearbox, spur gear, angle gear, worm gear, Movigear, flat gear, flat gear Bolq D Eot Sz Htsi Aswl -Gearbox: Parallel shaft gear box, without type designation SEW EURODRIVE Parallel shaft gear motor series F..DR.. -Drive: without electric motor -Part No.: M17 GH 3 250613 -Translation: i= 38 -Hollow shaft: Ø 90 mm -Recess for motor: Ø 250 mm -Bolt circle for engine: Ø 300 mm -Dimensions: 720/350/460 mm -Weight: 226 kg

Year of construction: 2016, Condition: good (used), Item: M-3525-APV-Pump-W+65/350-235 STD APV Centrifugal Stainless Steel Pump Type: W+65/350-235 STD, Year: 2016 Bwjlqokt Upno D Ei Asl 2 pieces identical! 11 kW, 1450 Rpm Used!

Condition: good (used), Year of construction: 2011, machine/vehicle number: HD 11009208-2, pressure: 350 bar, overall weight: 890 kg, rotational speed (max.): 1,500 rpm, power: 31 kW (42.15 HP), Equipment: type plate available, Used high pressure pump. Belq D Ejtuqmgji Aowl Technical specifications: Year of manufacture: 2011 Type: RS716E/350 Serial number: HD 11009208-2 31 kW 350 bar 1500 1/min 47 l/min With Hammelmann ACM 225S-4/HE 400/690V 66.2/38.4A 50Hz 37kW 1480 1/min Condition: used (see pictures and type plates) Scope of delivery: 1 pump

Condition: used, T-slot plate, clamping plate with dovetail grooves, plate field, welding table, welding table -Intermediate plate: for hydraulic press eccentric press -Opening: 150 x 100 mm Bolqsmydnco D Ei Aowl -Groove width: 18 mm -Hole distance: 200 x 250 mm, Ø 14 mm -Dimensions: 480/350/H60 mm -Weight: 66 kg