Used Eumega Md-2 for sale (43,022)

Condition: used, Year of construction: 2013, Year of manufacture: 2013 Empty weight: 19.860 kg Extendable superstructure: Yes Price: On request Meusburger MTS-5+2+2. Bwjlov Nhuisn Un H Rsl Year: 2013. 12 tons Gigant axles. Weight: 19.860 kg. Max weight: 84.000-108.000 kg. Kingpin load: 18.000-24.000 kg. Hydr. gooseneck. Hydraulic works on NATO. EBS ABS ALB. Toolbox on neck. Central greasing system. 2 x 6 meter extandable. Total 12 meter extand! 2 x 25 cm widened. Hydr. suspension. 1st axle liftaxle. Powersteering all axles steering axles. Dimmensions: Neck: L: 3900 mm. W: 2550 mm. H: 1500 mm. Kingpin height: 1250 mm. Floor: (5 axles) L: 9500 mm. W: 2550 mm. H: 900 mm. 2 x Meusburger MUA-2. 12 tons gigant axles. Max weight 24.000 kg. Lenght floor: 3200 mm (x2). Tyres: 245/70R17,5 80%. ID NR: 450. The General Terms and Conditions of Heinhuis are applicable to all adverts, offers and quotations by Heinhuis, all agreements entered into by Heinhuis and the negotiations preceding them. By any form of response you accept the applicability of the General Terms and Conditions of Heinhuis and you declare that you have taken note of these General Terms and Conditions. Our prices are export netto prices.

Condition: good (used), Year of construction: 2004, Functionality: fully functional, For sale is a sawmill dust extraction system in excellent condition, with an 11 KW extraction motor and the accompanying 40 m3 closed sawdust storage container. Bwjln Uewff Abjn H Rjl

Year of construction: 2002, Condition: used, electr. connected load 3x400V / 50Hz installed capacity: 104 KVA current intensivity max. 150 A Required air-pressure min. 5 bar In our opinion, the machine is in good used condition and can be inspected under power by appointment. There are 2 machines available. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Bwoln Un Hov N Rabe Rjl Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, HSK - Motor-driven guillotine shear: - Motor: Dietz 380-3-50, 2.2 kW - Stroke rate: 100 rpm - Weight: approx. 700 kg - Driven by brake motor - Cut initiated by a movable foot switch - Shear table with support table extended to approx. 600 mm - Side stop TA 500 with scale - Folding rear width stop ZA 500 - Manually adjustable. The stop can be raised for long sheets. - Fully installed and ready for use Additional: Pneumatic hold-down device Bwoln Unjv Tm Hlj H Rjl

Year of construction: 2016, Condition: not inspected (used), Functionality: limited functionality, machine/vehicle number: 989913230000, Used HILGE HYGIA II pump in unrepaired condition. Stainless steel pump for food use. The pump can be completely refurbished upon request, with a choice of color, mechanical seal material, and housing seals. The pump is in good condition, but the mechanical seal and housing seals need to be replaced. Replacing the motor bearings is also recommended. Further information is available upon request. Bwjln Un Hsvu Sgao Rjl

Condition: used, mileage: 1,007,609 km, power: 315 kW (428.28 HP), first registration: 05/2019, number of seats: 57, gearing type: automatic, emission class: euro6, color: white, brakes: retarder, Equipment: ABS, air conditioning, bathroom, electronic stability program (ESP), navigation system, onboard kitchen, parking heater, sleeping cabin, +++Very good condition. Sleeping seats with lap belts available, currently 49+1+1 installed+++ +++3 benches included+++ Engine: Mercedes-Benz Emission class: Euro 6 Transmission: Automatic Safety * Retarder * Cruise control * Adaptive cruise control * ABS, ASR, ESP, EBS * Fog lights * Immobilizer Bjlsv Swvnen Un H Rowl * Xenon headlights * Brake assist * Lane departure warning * Rear view camera * Multifunction steering wheel Passenger compartment: Auxiliary heating * Air conditioning * Tables * Curtains * Luggage racks * Luggage nets * Jet ventilation * Reading lights * Double glazing * Footrests * Kitchen * Refrigerator * Coffee machine * Central toilet * Leather headrest inserts * Driver microphone * Wheelchair space * Wheelchair lift Exterior: Raising/lowering system * Power steering * Tachograph with card * Sun visor * Sleeping compartment prepared * Exterior mirrors Electric * Ski case eyelets * Central locking * Roof hatches, fans, roof vents Audio and communication navigation system * Voltage converter * Radio/CD * USB on the radio * USB on the benches * Video/DVD Other vehicle dimensions: Length 13.11 m, width 2.55 m, height 3.77 m * German vehicle registration document * Hubcaps * Dual tires * Tires: Front 40%, Rear 40% Our internal vehicle number: 11439 Errors excepted. Images and text may differ from the vehicle. Over 300 other vehicles are always available.

Condition: ready for operation (used), Year of construction: 1990, Weinig Type Profimat P22 N/2 Year of manufacture 1990 Number of spindles 5 Spindle arrangement: U-R-L-T-U Motors kW 4 - 7.5 - 5.5 Mobile spindle - the left shaft automatically adjusts to the scanned width Planing width approx. 220 mm Planing height approx. 120 mm Spindle diameter 40 mm Table length approx. 2000 mm Cardan feed Safety cover Table lubrication: lubricant pump Feed in front of the planer Feed speed continuously variable 5-22 m/min., 2.2 kW Profiling package: axial adjustment of the right and left shafts 20 mm Bjln Un Hsv T Ryce Rewl Sliding rollers: 1 driven unit Electric adjustment of the thicknessing shaft Weight approx. 1800 kg Price €11,500 Year of manufacture 1990 Condition tested for functionality

Condition: new, Year of construction: 2025, machine/vehicle number: 30765, BELT HAUL-OFF BASE.2 - new machine from IDE-stock programme - Extrusion height preset to 1,100 mm - External height adjustment with 4 threaded spindles Beln Un Hjwcaqhj Rjwl - Base frame 2.0 m long, welded tubular frame - Driven by 2 AC motors 0.55 kW each (rated-power at 50Hz) * operation at 87Hz = 0,96 kW each - Pull-off speed 1.0 to 10 m/min - Pull-off force max. 5.360 N - Contact length approx. 1,000 mm - Pneumatic track clamping * Weight compensation of the upper caterpillar carrier * Adjustable stop for mechanical limitation mechanical limitation of the track clamping * Equalising tank for compressed air supply - 2 transport belts 200 mm wide * Hardness approx. 40 Shore A - Protective panelling with sliding door, limit switch protected * with inlet and outlet protection channel, 500 mm long - Profile guide rollers on infeed side, adjustable - Analogue operation, integrated in the control cabinet

Condition: used, Year of construction: 2013, In our opinion, the machine is in good used condition and can be inspected under power by appointment. There are 2 machines available. Accessories, tools, and clamping devices shown are only included in the Bwjln Un Hev N Razo Rsl scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, Year of construction: 1968, Gewinde-Ø 52 mm threading length 500 mm thread pitch entsprechend Hohlspindel -Ø 54 mm spindle turning speed range 25 - 140 U/min turning speeds: 6 Stufen voltage 380 V / 50 Hz main drive motor 3 kW total power requirement 4,5 kW weight of the machine ca. 0,75 t dimensions of the machine ca. 1,0 x 1,8 x 1,4 m • with driven workpiece clamping, • threading head Z 52, • cooling device, • 2 sets of chaser holder,size: Z52/2B, + 21B • 5 sets of chaser jaws,pitch 1 - 2,5 mm Machine is in a good condition. Boln Ujv N N Scon H Rewl

Condition: not inspected (used), Year of construction: 2016, Functionality: limited functionality, machine/vehicle number: 989913220001, Used HILGE HYGIA II pump in unrepaired condition. Stainless steel pump for food use. The pump can be completely refurbished upon request, with a choice of color, mechanical seal material, and housing seals. The pump is in good condition, but the mechanical seal and housing seals need to be replaced. Replacing the motor bearings is also recommended. Bslsvu R U Aen Un H Rjwl Further information is available upon request.

Condition: used, Year of construction: 1995, GNT S 1300/2 Upper and lower panel brush and washer. Working width: mm. 1300 3 Lower brushes 3 Upper brushes Bwelov E N Rden Un H Rjl Maximum panel thickness: 100 mm

Condition: like new (used), Year of construction: 2014, Functionality: fully functional, machine/vehicle number: SA14F04798, type of input current: AC, input voltage: 380 V, input current: 26 A, power: 10 kW (13.60 HP), Nordson Pro Blue 4/2 hotmelt glue unit suitable for 2 hose connections. The tank has a capacity of 4 liters. The unit can also be supplied with 4 hose connections. The price is then to be determined. The glue unit has been completely cleaned internally and externally by us, tested and is fully functional Bwjln Un Hsway Nxs Rsl

Condition: used, overall weight: 65,000 kg, maximum load weight: 51,600 kg, axle configuration: > 3 axles, first registration: 07/2023, next inspection (TÜV): 07/2024, total width: 2,540 mm, Equipment: ABS, Excerpt from the furnishings. Full furnishings available upon request. Bsln Uowbb Ulen H Rowl * Telescopic loading bed, length approx. 8,800 mm, with a rear slope of approx. 500 mm x 10° * Recess in the slope and extending into the loading bed to accommodate the excavator dipper * One pair of two-part steel ramps * BPW axles and suspension, 1st and 2nd axles rigid, 3rd and 4th axles self-steering * Air suspension with lift and lower valve * 235/75 R 17.5 3PMSF tires with twin tires * WABCO EBS-E braking system * Steel bulkhead, pluggable, approx. 400 mm high * One pair of pluggable aluminum side walls on the gooseneck, approx. 400 mm high, anodized * One pluggable aluminum rear wall on the gooseneck, approx. 400 mm high High, anodized finish * 2 kingpins * Extensions (galvanized), extendable by approx. 230 mm per side (without wooden planks) * 1 pair of permanently installed wheel recesses, open to the extension, approx. 700 x 410 mm (W x D), in the loading area in front of the 1st axle * Wheel recesses with sheet metal covering and square climbing rails, approx. 15 x 15 mm, approximately every 200 mm * Between the 2nd and 3rd axles in the loading area, 1 pair of permanently installed wheel recesses, approx. 1,695 x 700 x 410 mm (L x W x D) * Covers for wheel recesses, divided lengthwise, with wooden support, with external plug-in safety devices * WABCO Smart Board System * 1 single-piece stainless steel toolbox, approx. 2,480 x 340 x 390 mm * Galvanized stands for the Extendable wheel well extensions for widening the wheel well covers * Central lubrication system with 1 pump, brand BEKAMAX * 1st axle with automatic lifting axle function and traction aid * 1 LED reversing light on the left and right rear of the vehicle * Complete HRM (High Resistance Metallization) metallization

Condition: excellent (used), Sibo Taus 2 1/2 Stylus Profiling Machine Working diameter 18-63mm Beln Ujv Tv Ursn H Rewl Main engine with 5.5kw power Minimum length of the processed element 470mm Feed speed regulated by means of a variator Possibility of producing elements such as: billiard cues, broom handles, shovels, rakes or chair legs

Condition: used, Technical details: sheet width: 250 mm plate thickness: 2 mm number of rolls: 11 straightening feed: 5...30 m/min infeed height: 1250 mm total power requirement: 4,0 kW weight of the machine ca.: 620 kg dimensions of machine: 1,15x1,02x1,5 mm dimensions electric cabinet LxWxH: 0,66x0,53x0,32 m Band Leveling Machine with feed equipment: - sideways band guidance rolls model: - band intake height horizontal:1250mm Bwjln Ueu Ic Ewon H Rel - tiltable: positiv 30°; negativ 15° *

Condition: not inspected (used), Year of construction: 2020, Functionality: limited functionality, machine/vehicle number: 2212029166-010-001, Used HILGE HYGIA II pump in unrepaired condition. Stainless steel pump for food processing. The pump can be completely refurbished upon request, with a choice of color, mechanical seal material, and housing seals. The pump is in good condition, but the mechanical seal and housing seals need to be replaced. Bwoln Unsvu Sh De H Rel Replacing the motor bearings is also recommended. Further information is available upon request.

Condition: good (used), axle configuration: > 3 axles, loading space length: 27,060 mm, loading space width: 2,530 mm, first registration: 04/2006, suspension: hydraulics, tire size: 245/70-R17.5, Year of construction: 2006, Equipment: ABS, = Additional Options and Accessories = - EBS - Lifting axle - Air suspension - Drum brakes = Remarks = 2006 BROSHUIS 5ABSD-68/2 5-axle low loader with ABS/EBS, 2x extendable (6.70m + 6.50m) extendable to 27m, 1st axle = lifting axle, 5x hydraulically suspended axles, 4 of which are hydraulically steered (with remote control), hydraulic neck, stake pockets, lashing eyes, twist locks, extensions, empty weight: 17,000kg, max. weight: 97,000kg, GIGANT axles with drum brakes, twin tires with 245/70-R17.5 tires (L: 8/8, 7/8, 7/7, 6/8, 6/4mm: R: 10/11, 7/7, 5/6, 8/6, 6/5mm) = Further information = Axle configuration Tire size: 245/70-R17.5 Axle brand: GIGANT DRUM Brakes: Drum brakes Suspension: Hydraulic suspension Rear axle 1: Twin tires; Lift axle; Max. axle load: 10,000 kg; Tire profile inside left: 50%; Tire profile outside left: 50%; Tire profile inside right: 70%; Tire profile outside right: 60% Rear axle 2: Twin tires; Max. axle load: 10,000 kg; Steered; Tire profile inside left: 50%; Tire profile outside left: 45%; Tire profile inside right: 45%; Tire profile outside right: 45% Rear axle 3: Twin tires; Max. axle load: 10,000 kg; Steered; Tire profile left inside: 45%; Tire profile left outside: 45%; Tire profile right inside: 40%; Tire profile right outside: 30% Rear axle 4: Twin tires; Max. axle load: 10,000 kg; Steered; Tire profile left inside: 50%; Tire profile left outside: 40%; Tire profile right inside: 40%; Tire profile right outside: 50% Bwolswamnnjn Un H Rel Rear axle 5: Twin tires; Max. axle load: 10,000 kg; Steered; Tire profile left inside: 25%; Tire profile left outside: 40%; Tire profile right inside: 30% Right outer tire tread: 40% Dimensions Dimensions (L x W): 2706 x 253 cm Weights Unladen weight: 17,000 kg Payload: 80,500 kg GVW: 97,500 kg Functional Body brand: Broshuis 5ABSD-68/2 Loading area height: 100 cm Extendable body: Yes Condition Technical condition: Good Visual condition: Good Further information Contact Arne Honingh or Piet Swank for further information.

Condition: new, mileage: 10 km, power: 129 kW (175.39 HP), fuel type: diesel, gearing type: automatic, overall weight: 3,500 kg, loading space length: 4,200 mm, loading space width: 2,200 mm, loading space height: 2,200 mm, loading space volume: 20 m³, color: white, number of seats: 3, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, tail-lift, Iveco Daily 35S18HA8, Euro VIE 176 HP 3.0 Diesel, 8-speed automatic transmission - White - New Model COMFORT PLUS PACKAGE: ? 79297 - Fully padded headrests, Daily logo Bjln Un Hevpcvhe Rewl ? 00259 - Padded, comfortable driver's seat ? 01605 10-inch screen with navigation ? 75082 - Fixed 2-seater passenger bench with folding table, 3-point seat belts ? 06650 - Cabin ventilation and heating system with automatic air conditioning ? 01611 - USB socket with charger ? 14522 - Active Cruise Control (ACC) with radar sensor ? 06555 - Fog lights STYLE PACKAGE ? 79336 - Radiator with chrome stripes ? 01553 - Gun Metal Emblems ? 02443 - Leather Upholstery ? 02308 - Daily Aluminum Wheels ? 72625 - Full LED Lights The vehicle price also includes: 06064 - Double-reinforced parabolic rear compressors for S models 07629 - No reversing audible signal 73024 - Side mirrors on arms for installation with a width of 2.35 m 00676 - Rear view camera -Tachograph Body: Box with LBW 750 kg, 4200 mm x 2200 mm x 2200 mm (L x W x H) Equipment: ? Subframe with floor binding made of aluminum profiles ? Body made of spacer plates, semi-transparent roof window laminate ? Exterior and interior lining made of white polyester laminate ? Lift closing hatch ? Inside, a wall-mounted strip for securing the load with a spotting pole - 1 row  (mounted at a height of approximately 800 mm) ? Floor lined with waterproof, non-slip plywood, 15 mm thick ? Container side door (opens to the right, width approximately 900 mm) ? Roof spoiler + side panels (white) ? 750 kg loading hoist - the building will close the container Platform length approximately 1600 mm Remote control on a spiral cable Control box with power switch Trailer hitch 3500 kg     Our special service for you: * Service history maintained by authorized partners and master workshops * Winter tires available for an additional charge * Warranty insurance up to a maximum of 36 months available for an additional charge * We gladly and fairly accept your used vehicle as part payment! * Financing from 6.99% with or without down payment up to a maximum of 96 months, subject to creditworthiness * TÜV/DEKRA general inspection and emissions test * EU net sales possible - intra-community delivery with a valid sales ID number * Non-EU countries (worldwide) sales possible including export declaration and supplier declaration * We deliver your vehicle throughout Germany for an additional charge! * Registration service for customs license plates and temporary license plates including insurance and registration fees The information provided online is non-binding. Errors and omissions excepted. The information provided is not considered a guaranteed quality within the meaning of Section 434 (1) Sentence 3 of the German Civil Code (BGB).

Condition: used, empty load weight: 24,200 kg, maximum load weight: 56,200 kg, operation weight: 80,400 kg, first registration: 05/1995, next inspection (TÜV): 01/2020, suspension: air/air, tire size: 245/70R17.5, total width: 25,500 mm, front tire size: 245/70R17.5,

Year of construction: 2009, Condition: good (used), GRUNWALD HITTPAC AKH-059/2 Item: GRUNWALD Hittpac AKH-059/2 Grunwald-Cup Filling Machine diverse, margarine, sous, butter, cheese etc.. Bwsln Unel D T D Te H Rol Grunwald Rotary cup filling machine with 2 heads, for round cups Year of production: 2009 For hot fill of liquid products including cup lifting device servo driven and hopper with scraper agitator and feed valves (CIP cleanable), aluminum seal dispensing by vacuum and tip sealing, heat sealing of aluminum seal, snap-on cover station and out feed. Stainless steel control panel, hanging on the machine with servo controller (make: Elau) and touchscreen operator panel. Machine has polycarbonate glass safety guards. Documentation (instruction, parts manual and electric scheme) in German available CEE machine, incl. complete documentation

Condition: good (used), mileage: 845,459 km, power: 345 kW (469.07 HP), first registration: 11/2015, fuel type: diesel, color: blue, axle configuration: 6x2, fuel: diesel, wheelbase: 4,900 mm, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2015, Equipment: sleeping cabin, Volvo FH13.460 Globetrotter 6x2*4 - Cuppers 1/2/3 deck livestock - Water & Ventilation - Night clima MY: 30-11-2015 KM: 845459 YV2RTY0C1GB748204 19-BGP-3 Cuppers 1/2/3 Water & Ventilation Lifting roof Lifting floors Steering axle Euro 6 Dutch truck = More information = Technical information Number of cylinders: 6 Engine displacement: 12,777 cc Drivetrain AdBlue system: Yes Gearbox Gearbox: I shift, 12 gears, automatic Bwoln Unjv Unypo H Rol Axle configuration Front axle: Max. axle load: 8000 kg; Suspension: Leaf spring suspension Rear axle 1: Twin tires; Max. axle load: 11500 kg; Suspension: air suspension Rear axle 2: lift axle; Max. axle load: 7500 kg; steered; Suspension: air suspension Dimensions Dimensions (L x W): 972 x 255 cm Weights Empty weight: 15,285 kg Payload: 13,315 kg GVW: 28,600 kg Functional Brand of bodywork: Volvo Condition Technical condition: good Visual condition: good Identification License plate: 19-BGP-3 More information Contact VAEX The Truck Traders or Goverstone for more information.

Condition: used, Year of construction: 1965, bore capacity in steel (diameter) 45 mm arm length 325 / 1000 mm workpiece height max. ca. 1000 mm spindle taper MT 4 spindle turning speed range 40 - 1700 U/min feeds 0,125 - 1,25 mm/U distance spindle/base plate 385 / 1400 mm Bwjln Un Hovh Nb Ij Rsl quill stroke 325 mm crossrail adjustment vertical 700 mm 360 ° boring head horiz. adjustable 675 mm base plate surface area 1300 x 800 mm total power requirement 6,2 kW weight of the machine ca. 3,8 t dimensions of machine L x W x H 2,30 x 0,98 x 2,82 m - autom. feed - right-/left spindle run Accessories: box table 1000 x 750 x 500 mm, hydr. vice, width of jaws 200 mm, coolant

Condition: good (used), drying oven, drying cabinet, chamber dryer oven, warming oven, heating chamber, drying oven, drying cabinet, drying and warming cabinet -Manufacturer: Laboratory Müszeripari Müvek, chamber dryer oven type LP-321/2 -Usable space: WTH 500x520x660 mm -Heating power: 3.3 kW Bwoleulpz Esn Un H Rol -Working temperature: 30 to 270°C -Door seal: silicone -Individual components: see photos -Installation dimensions: 2510/1600/H3760 -Transport dimensions: 990/740/H960 mm -Weight: 153 kg

Condition: good (used), axle configuration: 3 axles, first registration: 09/2007, suspension: air, tire size: 245/70R17.5, wheelbase: 6,200 mm, Year of construction: 2007, Finkl livestock 1/2/3 deck - 56M2 - Water & Ventilation - Lifting roof - BPW Axle MY: 20-9-2007 W090VA3247BF21469 29-WS-NS 1st floor: 19.60 2nd floor: 38.00 3rd floor: 56.00 Water & Ventilation Lifting floors Lifting roof Load ramp BPW axle = Further information = Axle configuration Tire size: 245/70R17.5 Axle brand: BPW Suspension: Air suspension Front axle: Twin tires; Max. axle load: 9000 kg; Tire profile left inner: 50%; Tire profile left outer: 50%; Tire profile right inner: 50%; Tire profile on the right outermost side: 50% Rear axle 1: Dual tires; Lift axle; Max. axle load: 9000 kg; Tire profile on the left inner side: 50%; Tire profile on the left outer side: 50%; Tire profile on the right inner side: 50%; Tire profile on the right outer side: 50% Rear axle 2: Dual tires; Max. axle load: 9000 kg; Tire profile on the left inner side: 50%; Tire profile on the left outer side: 50%; Tire profile on the right inner side: 50% Right outer tire tread: 50% Dimensions Dimensions (L x W): 1035 x 255 cm Weights Unladen weight: 8,700 kg Payload: 15,300 kg GVW: 24,000 kg Maintenance, history, and condition General technical inspection (MTI): inspected until August 2025 Technical condition: good Visual condition: good Identification License plate: 29-WS-NS Bwjlnov Unx Es Un H Rel Further information Contact VAEX The Truck Traders or Goverstone for further information.