Used Nilfisk-Alto Neptune 2-26X for sale (39,176)

Condition: reconditioned (used), functionality: fully functional, operating pressure: 180 bar, empty load weight: 230 kg, input voltage: 400 V, warranty duration: 6 months, temperature: 140 °C, NILFISK ALTO NEPTUNE 8-103 HOT WATER WASHER This machine features new accessories, including a German R+M gun, stainless steel lance, steel braided hose, and a 25° power nozzle. A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. A highly efficient three-phase motor ensures stable operation even during prolonged use. With operating parameters of 180 bar and up to 1950 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Each machine we offer has individually taken photos; you are buying exactly what you see. TECHNICAL DATA: Power supply voltage [V]: 400 ~3 phase Discharge capacity [l/h]: 1950 Operating pressure [bar]: 180 Maximum pressure [bar[: 250 Max. Heating temperature [°C]: 70-140 Connection power [kW]: 12 Cleaning agent tank [l]: 15+10 Hose length [m]: 10 Weight [kg]: 230 EQUIPMENT: NEW durable pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced 10m steel braided pressure hose NEW 25° power nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE KEY FEATURES: Dsdpfx Adoxwupreuecr Open oil system - no operating time limits Built-in chemical tank allows for dosing of cleaning fluid directly through the machine Very clear and intuitive control panel Simple design and easy access to individual components under the housing make the machine user-friendly and easy to service

Condition: reconditioned (used), functionality: fully functional, operating pressure: 150 bar, high-pressure hose length: 10,000 mm, input voltage: 400 V, fuel: electricity, overall weight: 135 kg, warranty duration: 6 months, temperature: 80 °C, HOT WATER PRESSURE WASHER NILFISK 5M-150/750 NEW ELECTRIC HEATER (2x) The device has new equipment, including a German brand R+M gun, stainless steel lance, steel braided hose and 25° power nozzle A durable brass head with new ceramic pistons and seals guarantee long and trouble-free operation A very efficient three-phase motor ensures stable operation even with long-term use Thanks to the operating parameters of 150bar and 750l/h, the machine can be effectively used for heavy work in construction, logistics and agriculture Fully electric water heating allows work in places where exhaust gas production is not allowed. Each device we offer has individually taken photos, you buy exactly the machine you see Dodpfx Aev Src Nsduecr TECHNICAL DATA: Power supply voltage [V]: 400 ~3 phases Pressing capacity [l/h]: 750 Working pressure [bar]: 150 Max. heating temperature [°C]: 80 Heater power [kW]: 24 Cleaning agent tank [l]: 10 + 10 Hose length [m]: 10 Weight [kg]: 135 EQUIPMENT: NEW ELECTRIC HEATER (2x) NEW durable pressure gun by German brand R+M NEW pressure lance made of stainless steel NEW reinforced pressure hose in steel braid 10m NEW power nozzle 25° WATER FILTER AND GEKA claw connectors - FREE KEY FEATURES: Open oil system - no operating time limit Built-in chemical tank allows dosing of cleaning fluid directly through the machine Very legible and intuitive control panel Simple construction and good access to individual elements under the housing make the machine user-friendly and easy to service

Condition: reconditioned (used), functionality: fully functional, operating pressure: 175 bar, high-pressure hose length: 10,000 mm, empty load weight: 224 kg, input voltage: 400 V, warranty duration: 6 months, NILFISK ALTO NEPTUNE 7-63 HOT WATER WASHER This machine features new accessories, including a German R+M gun, stainless steel lance, steel braided hose, and a 25° power nozzle. A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. A highly efficient three-phase motor ensures stable operation even during prolonged use. With operating parameters of 175 bar and up to 1170 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Each machine we offer has individually taken photos; you are buying exactly what you see. TECHNICAL DATA: Power supply voltage [V]: 400 ~3 phase Dsdpjxdz Hkofx Aduocr Discharge capacity [l/h]: 1170 Operating pressure [bar]: 175 Max. heating temperature [°C]: 100-140 Connection power [kW]: 8.3 Cleaning agent tank [l]: 15+10 Hose length [m]: 10 Weight [kg]: 224 EQUIPMENT: NEW durable pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced 10m steel braided pressure hose NEW 25° power nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE KEY FEATURES: Open oil system - no operating time limits Built-in chemical tank allows for dosing of cleaning fluid directly through the machine Very clear and intuitive control panel Simple design and easy access to individual components under the housing make the machine user-friendly and easy to service

Condition: reconditioned (used), functionality: fully functional, operating pressure: 175 bar, high-pressure hose length: 20,000 mm, empty load weight: 224 kg, input voltage: 400 V, warranty duration: 6 months, temperature: 140 °C, NILFISK ALTO NEPTUNE 7-63 X2 HOT WATER PRESSURE WASHER Dedexdzl Tepfx Aduscr This machine features new accessories, including a German R+M gun, a stainless steel lance, a steel braided hose, and a 25° power nozzle. The built-in hose reel makes it easy to roll up and store the hose. A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. A highly efficient three-phase motor ensures stable operation even during prolonged use. With operating parameters of 175 bar and up to 1170 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Each device we offer is individually photographed; you buy exactly what you see. TECHNICAL DATA: Power supply voltage [V]: 400 ~ 3 phase Discharge capacity [l/h]: 1170 Operating pressure [bar]: 175 Max. Heating temperature [°C]: 100-140 Connection power [kW]: 8.3 Cleaning agent tank [l]: 15+10 Hose length [m]: 20 Weight [kg]: 224 EQUIPMENT: NEW durable pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced 20m steel braided pressure hose NEW 25° power nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE KEY FEATURES: Open oil system - no operating time limits Built-in chemical tank allows for dosing of cleaning fluid directly through the machine Very clear and intuitive control panel Simple design and easy access to individual components under the housing make the machine user-friendly and easy to service

Year of construction: 2019, condition: good (used), Nilfisk Neptune 5-28 Industrial Power Washer The NEPTUNE 5 series features low running and maintenance costs, robustness, durability and high cleaning efficiency. Heating costs are reduced with the award-winning EcoPower boiler system with > 92% heating efficiency. Sound level is reduced thanks to the 1450 rpm motor. On board break tank with type AA airgap. EcoPower boiler with > 92% efficiency Full ceramic piston pump Reduced running costs1450 rpm motor with low noise level Quick Service concept reduces maintenance costs Dodpfsppa Imex Aduecr Easy to use control panel, all controls on one place ERGO quick change accessory system for additional user comfort Make an enquiry

Condition: reconditioned (used), functionality: fully functional, operating pressure: 170 bar, high-pressure hose length: 10,000 mm, empty load weight: 71 kg, input voltage: 400 V, warranty duration: 6 months, NILFISK ALTO POSEIDON 7-59 COLD WATER PRESSURE WASHER This machine features new accessories, including a German R+M gun, stainless steel lance, steel braided hose, and a 25° power nozzle. A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. A highly efficient three-phase motor ensures stable operation even during prolonged use. With operating parameters of 170 bar and 1120 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Each machine we offer has individually taken photos; you buy exactly what you see. TECHNICAL DATA: Power supply voltage [V]: 400 ~ 3-phase Discharge capacity [l/h]: 1120 Operating pressure [bar]: 170 Connection power [kW]: 7.1 Weight [kg]: 71 Hose length [m]: 10 Max. inlet temperature (°C): 60 Dedpexd Apajfx Aduocr Dimensions (L x W x H): 1020 x 480 x 940 EQUIPMENT: NEW durable pressure gun from the German brand R+M NEW pressure lance NEW reinforced 10m steel braided pressure hose NEW 25° power nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE

Condition: reconditioned (used), functionality: fully functional, operating pressure: 170 bar, high-pressure hose length: 15,000 mm, empty load weight: 212 kg, input voltage: 400 V, warranty duration: 6 months, temperature: 99 °C, NILFISK ALTO SOLAR BOOSTER 7-58 D HOT WATER PRESSURE WASHER This machine features new accessories, including a German R+M gun, stainless steel lance, steel braided hose, and a 25° power nozzle. A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. A highly efficient three-phase motor ensures stable operation even during prolonged use. With operating parameters of 170 bar and 1110 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Each machine we offer has individually taken photos; you are buying exactly what you see. TECHNICAL DATA: Power supply voltage [V]: 400 ~3 phase Discharge capacity [l/h]: 1110 Operating pressure [bar]: 170 Max. heating temperature [°C]: 99 Dcjdpfew Dpicjx Adujr Connection power [kW]: 6.9 Hose length [m]: 15 Weight [kg]: 212 Dimensions (L x W x H mm): 900 x 700 x 940 EQUIPMENT: NEW durable pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced 15m steel braided pressure hose NEW 25° power nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE KEY FEATURES: Open oil system - no operating time limits Very clear and intuitive control panel Simple design and easy access to individual components under the housing make the machine user-friendly and easy to service

Condition: used, mileage: 296,550 km, power: 235 kW (319.51 HP), first registration: 11/2008, overall weight: 26,000 kg, fuel type: diesel, color: orange, axle configuration: 3 axles, gearing type: semi-automatic, emission class: euro4, Equipment: ABS, air conditioning, all wheel drive, crane, parking heater, * Mercedes Actros MP2 - 2632 6x4/2 Winterdienst + Meiller Abroller + HMF Kran * HMF Ladekran * Typ 750 * RCC5100 * 2 x hydr. Auszug * Greifersteuerung * Podest / Hochstand * Bedienung von oben und unten * Meiller Abrollkipper RK 14.55 * Meiller hydr Unterfahrschutz * Meiller Bedienpult für Anbauplatte vorne * Winterdienst * Anbauplatte vorne + 4 x hydr. Anschlüsse * Zusatzbleuchtung * Sonnenblende * Aupuff hochgezogen * Warnleuchten * Rundumlicht * Arbeitsbeleuchtung * Lenkachse * Liftachse * Salzstreuerhydr- Anschlüsse * AHK - DL- Anschlüsse * Staubox * AD- Blue * 2 x Lufsitz * Dachuke * Tacho - Manuel * el. FH + el. Spiegel + Spiegelheizung * Frontscheibenheizung * Diffenzialsperren * Allrad + Liftachse * Rückfahrcamera * MB Radio CD * Reifen 385/65R22,5 ca. 70% * 315/80R22,5 ca. 70% * 385/65R22,5 ca. 10% Dcedox Dn N Sspfx Adujr * deutsches Fahrzeug * 1. Hand * Behördenfahrzeug * Netto-Verkauf innerhalb der EU wird nur noch mit MWST Kaution und dem Nachweis der Zulassung im Bestimmungsland (Gelangensbestätigung) durchgeführt, * Verkauf nur an Gewerbe, Transport zum Hafen möglich, * Dieses Angebot ist unverbindlich und freibleibend. * Irrtum und Zwischenverkauf vorbehalten. Keine Gewähr auf Eingabefehler. * Besichtigungen nur nach Vereinbarung, * WhatsApp

Condition: used, mileage: 260,205 km, power: 255 kW (346.70 HP), first registration: 05/1997, overall weight: 26,000 kg, fuel type: diesel, axle configuration: 6x6, maximum load weight: 13,850 kg, empty load weight: 12,150 kg, wheelbase: 3,900 mm, brakes: engine braking, driver cabin: other, gearing type: mechanical, emission class: euro2, loading space width: 2,450 mm, loading space length: 4,600 mm, loading space height: 900 mm, number of seats: 2, Equipment: all wheel drive, cabin, differential lock, trailer coupling, * German vehicle * 6x6 all-wheel drive * V8 engine with turbocharger * Powerful, air-cooled V8 with OHV direct injection * Built for use in any terrain * Reliable technology with central tubular frame and swing axles * Complete leaf suspension * 3-sided tipper * Tipper dimensions length 4.90 m x width 2.45 m * Tail lifts 0.90 m * Front worktop * Municipal plate with electrical connections * Raised municipal lighting * Trailer coupling * Total towing weight 40,000 kg. * Tipper hydraulics * Driver's cab with 2 seats * Auxiliary heating * Differential lock * 6-speed manual gearbox * Heated electrically adjustable mirrors * Wheelbase 3.90 m + 1.40 m * GVW. 26,000 kg. * Unladen weight 12,150 kg. * Payload 13,850 kg. If new TÜV approval is required, we will be happy to provide you with an offer from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at Dcjdpovhp Tdjfx Aduor We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Year of construction: 2002, condition: good (used), machine/vehicle number: RHKBK250KG, DEMAG KBK crane sky crane runway dimensions approx. 6x5m Payload / lifting load 250 KG - 0.25 tons Technical data of the system: Crane track made from Demag KBK2 rails The system is delivered complete: KBK rails, rail connectors, chassis, end plates, cable drags, holders/suspenders etc. Dcsdpferft Nhex Aduer including Demag DK 250KG chain hoist Crane is dismantled and available immediately Used condition, see pictures Item location is 75053 Gondelsheim Shipping by courier or collection only by appointment Demag KBK1 KBK2 and KBK3 rails are stock items! Other KBK systems are also available. Payload 125KG - 1600KG Please request your crane runway with load capacity and dimensions without obligation.

Condition: used, mileage: 252,560 km, power: 310 kW (421.48 HP), first registration: 06/2018, overall weight: 26,000 kg, fuel type: diesel, color: blue, axle configuration: 6x4, maximum load weight: 10,850 kg, empty load weight: 15,150 kg, tire size: 315/80R22.5, next inspection (TÜV): 03/2025, wheelbase: 4,500 mm, brakes: engine braking, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, loading space width: 2,490 mm, loading space length: 6,510 mm, loading space height: 950 mm, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, cabin, central locking, crane, cruise control, differential lock, electronic stability program (ESP), fog lights, immobilizer system, onboard computer, power assisted steering, seat heater, traction control, trailer coupling, Vehicle location: Bovenden, ClassicSpace, Mercedes PowerShift 3, optional house, 1x comfort seat, seat heating, electric mirror, heated mirror, electric window left, electric window right, air conditioning, sun visor, cruise control, air horn, ABS (anti-lock braking system), traction control system (ASR), constant throttle, power take-off, differential lock, work lights, leaf suspension, air+light trailer hitch, aluminum tank, lashing eyes, U-protection, aluminum side guards, pendulum flaps, roof hatch, crane at rear, emergency stop, grab control, high seat, 2-point support hyd. Aluminum side protection, pendulum flaps, roof hatch, crane at rear, emergency stop, grab control, high seat, 2-point hydraulic outriggers, 2x hydr, 2x hydr. extensions, green environmental sticker Wheelbase: 4500 mm Body: Platform body with aluminum drop sides & rear crane Atlas AK 186.3 V-2 with high seat 8t front axle, rear axle disc wheel 233 planetary 13.4t, electronic brake system with ABS and ASR, disc brakes with partial protection on VA and HA, condensation water monitoring for compressed air system, front underride guard made of aluminum, stabilizer front axle, stabilizer rear axle, smoker package, residual heat utilization, construction site filter, additional thermal insulation, PSM, reversing alarm, ClassicSpace, comfort locking system, Power drive program, Mercedes PowerShift 3, pre-installation for toll collection, LED daytime running lights, High Performance Engine Brake, transmission oil cooling, ESP, Lane Keeping Assist, Attention Assist, refrigerator, auxiliary drive MB 131-2c pump. Dcsdpfevhnypox Adujr Load chart: 5.9m-3200kg, 8.5m-2120kg, 11.2m-1600kg! Pallet tongs available for an extra charge of € 2,900.00 net! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: used, mileage: 310,235 km, power: 235 kW (319.51 HP), first registration: 01/2009, overall weight: 26,000 kg, fuel type: diesel, color: white, axle configuration: 3 axles, gearing type: automatic, emission class: euro5, Equipment: ABS, air conditioning, * Anfragen gerne per WhatsApp * Radstand 4,20 * Telligent Automatikgetriebe * Klima * Federung: Blatt/Luft/Luft * Ad- Blue * Staubox * Liftachse * Lenkachse * el. FH + el. Spiegel * Differenzialsperre Djdpeim Dccjfx Aduecr * Rückfahrcamera * Reifen 385/65R22,5 ca. 50% * 315/70R22,5 ca. 30% * 315/70R22,5 ca. 20% * deutsches Fahrzeug * · Netto-Verkauf innerhalb der EU wird nur noch mit MWST Kaution und dem Nachweis der Zulassung im Bestimmungsland (Gelangensbestätigung) durchgeführt, · Verkauf nur an Gewerbe, Transport zum Hafen möglich, Dieses Angebot ist unverbindlich und freibleibend. Irrtum und Zwischenverkauf vorbehalten. · Keine Gewähr auf Eingabefehler. Transport zum Hafen möglich Besichtigungen nur nach Vereinbarung, WhatsApp

Year of construction: 2002, condition: good (used), machine/vehicle number: RHKBK125KG, DEMAG KBK crane sky crane runway dimensions approx. 6x5m Payload / lifting load 125 KG - 0.125ton Technical data of the system: Crane track made from Demag KBK2-L rails The system is delivered complete: KBK rails, rail connectors, chassis, end plates, cable drags, holders/suspenders etc. including Demag DK 125KG Manulift one-hand chain hoist Dedpforft Nlox Aduscr Crane is dismantled and available immediately Used condition, see pictures Item location is 75053 Gondelsheim Shipping by courier or collection only by appointment Demag KBK1 KBK2 and KBK3 rails are stock items! Other KBK systems are also available. Payload 125KG - 1600KG Please request your crane runway with load capacity and dimensions without obligation.

Condition: used, mileage: 174,048 km, power: 159 kW (216.18 HP), first registration: 12/1986, overall weight: 24,000 kg, fuel type: diesel, color: orange, axle configuration: 3 axles, gearing type: mechanical, total width: 2,500 mm, total height: 3,650 mm, RUTHMANN work platform, type: MTS 260, built in 1984, 4-way hydraulically extendable and supportable support, 3 levels hydraulically extendable, lifting height approx. 26.00 m, working height approx. 27.50 - 28.00 m, retracted height approx. 3.60 m, lateral reach approx. 24.00 m, swivel range 360 degrees, platform load capacity 250 kg, emergency lowering, double insulation against max. 1000 volts, auxiliary drive, differential lock, heated exterior mirrors, pop-up window, roof hatch, static driver's seat, height and inclination adjustable, middle seat, rotating beacon, battery isolator, leaf spring suspension, vehicle can be covered with advertising and/or labeled Dedpjvnpl Tjfx Aduecr Our offer is generally without a new TÜV approval. If you require a new TÜV inspection, we will be happy to provide you with an offer from our partner workshops! The vehicle can be covered with advertising and/or labeled. Our general delivery and payment terms apply. We would be happy to provide you with a financing or leasing offer for this object. Please contact us!

Condition: used, mileage: 208,266 km, power: 159 kW (216.18 HP), first registration: 10/1983, overall weight: 22,000 kg, fuel type: diesel, axle configuration: 6x4, maximum load weight: 8,160 kg, empty load weight: 13,840 kg, wheelbase: 3,600 mm, brakes: engine braking, driver cabin: other, gearing type: mechanical, emission class: euro3, loading space volume: 10 m³, operating hours: 2,876 h, number of seats: 3, Equipment: cabin, * German vehicle * 1st owner * Previously owned by a municipal authority * Complete documentation available * Various work videos available * Kanal Müller high-pressure vacuum jetting unit * 10,000-liter tank * Movable extension piston * Suction hose on hydraulic adjustable boom * Rear hose reel with 100 m 1-inch high-pressure hose * Small hose reel with 1/2-inch high-pressure hose, 30 m * Front high-pressure spray system * Uraca high-pressure pump * Type KD 615-G * 317 liters/minute * Demag Wittig vacuum pump Dedpfx Adew Hz Shsuocr * Type KD 164 VR * 880 m³/hour * Vacuum pump operating hours: 2,876 * High-pressure pump operating hours: 3,917 * Hose trays and storage compartments left and right * Large cab with 3 seats * Rotating beacons * 8-speed manual transmission * Work lights * Wheelbase: 3.60 m + 1.40 m * Leaf spring suspension * Gross vehicle weight: 22,000 kg * Empty weight: 13,840 kg * Payload: 8,160 kg * Self-propelled work machine, toll-exempt and permitted in all environmental zones If a new TÜV inspection is required, we would be happy to provide you with an offer from our partner workshops. Our offer is generally WITHOUT a new TÜV inspection, WITHOUT new DGUV, WITHOUT new SP, and WITHOUT new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend inspection and testing of the item in order to avoid misunderstandings regarding its condition and suitability. Viewing and testing are possible at any time by appointment and are expressly desired. All statements are without guarantee. We do not accept liability for errors or incorrect information in the offer. The buyer is obligated to independently verify the condition and equipment of the goods/vehicles. Subject to change, prior sale, and errors. - .

Condition: used, Year of construction: 1986, RUTHMANN work platform, type: MTS 260, built in 1984, 4-way hydraulically extendable and supportable support, 3 levels hydraulically extendable, lifting height approx. 26.00 m, working height approx. 27.50 - 28.00 m, retracted height approx. 3.60 m, lateral reach approx. 24.00 m, swivel range 360 degrees, platform load capacity 250 kg, emergency lowering, double insulation against max. 1000 volts, auxiliary drive, differential lock, heated exterior mirrors, pop-up window, roof hatch, static driver's seat, height and inclination adjustable, middle seat, rotating beacon, battery isolator, leaf spring suspension, vehicle can be covered with advertising and/or labeled Dcodpfx Adovnpmdeujr Our offer is generally without a new TÜV approval. If you require a new TÜV inspection, we will be happy to provide you with an offer from our partner workshops! The vehicle can be covered with advertising and/or labeled. Our general delivery and payment terms apply. We would be happy to provide you with a financing or leasing offer for this object. Please contact us!

Condition: used, Year of construction: 2007, x-travel 750 mm y-travel 600 mm z-travel 520 mm b-axis -10/+95 ° c-axis 360 ° control iTNC 530 HEIDENHAIN turning speed range - drive spindle 20 - 10.000 min/-1 drive capacity - spindle motor 9 / 13 kW feed speeds 10.000 mm/min rapid traverse X/Y/Z 24 / 24 / 24 m/min table surface area Ø 800 x 620 mm max. table load 350 kg T-slots 9x 14H7 mm table turning speeds 21,5 min/-1 tool taper SK 40 max. tool weight 6 kg tool change unit 30 Pos. voltage 400 V total power requirement 25 kVA weight of the machine ca. 7,4 t dimensions of the machine ca. 3,60 x 2,50 x 2,80 m coolant tank 1,90 x 0,70 x 0,25 m 3+2-axis CNC machining center DECKEL MAHO DMU 70 - Factory no.: 15435713144 Dodpfsx Dnfgex Adujcr - Machine ON: 44,228 h - Spindle ON: 18,742 h - Control: HEIDENHAIN iTNC 530 - Electric handwheel - Swivel range B-axis 180° - Swivel range C-axis 360°

Condition: excellent (used), Catalogue number 7757 TECHNICAL DATA Milling machine - Spindle diameter: 25mm - Spindle height: 120mm - Interchangeable spindle, tiltable 20 degrees - Spindle locking - Height adjustable (up/down) - Original guide fence - Table dimensions: 1120x750mm - 4 spindle speed settings - Motor: 3.8 kW Circular saw - Max blade diameter: 350mm - Spindle axis: 30mm - Blade adjustable (up/down and angle) - Spindle locking - Cutting width at fence: 540mm Dsdpfx Adexhdm Ieuecr - Cast iron table - Dimensions (L/W/H): 1260x900x1000mm - Weight: 610kg ADVANTAGES – Made in Poland – DTR documentation available – Used milling machine, very good condition Net price: 6900 PLN Net price: 1640 EUR (based on exchange rate 4.2 EUR) (Prices may vary with exchange rate fluctuations)

Condition: good (used), Polar Mohr RA-2 Jogger with roller and scale The machine is in perfect condition, ready to work. Technical data: Max format: B2+ Stack height: 150mm Weight: 450kg (jogger) + 150kg (weighing device) Power supply: 400V Air squeezing roller Air table Dedpswt Sqhjfx Aduscr Possibility of shaking to the right/left Adjustable angle of inclination Adjustable shaking frequency (on the inverter) Adjustable force and speed of the air squeezing roller. Chrome table surface The machine is additionally equipped with a Bizerba sheet weighing system that allows for counting sheets on the machine, taring, packaging, etc.

Condition: excellent (used), For sale: a complete, professional magnetic particle testing (MT/NDT) kit from the renowned brands Tiede and Blak-Ray, used in industrial quality control, welding, rail transport, and the energy sector. The equipment is fully operational and in very good technical and visual condition—ready for immediate use. The set includes: • Tiede FSM-2 – magnetic field strength meter (Feldstärkemessgerät), measuring range ±400 A/cm, 9 V DC power supply • Blak-Ray J-221 – professional long wave ultraviolet meter for UV lamp verification in NDT applications • Field Indicator MAGNAFLUX – magnetic field indicator for quick induction checks Dcsdpfoxl Dbtjx Adujr • Measurement probe with cable • Calibration specimen and auxiliary accessories • Glass cylinder for indicator fluid • Original transport case with protective foam Applications: • Weld seam inspection • Shaft, axle, and machine component examination • Testing of railway, energy, and aviation parts • Quality control in industrial production

Condition: used, diameter div. number 44x tool adaptor SK 40 Dcedpfxjxyzw Ue Aduer

Condition: like new (used), functionality: fully functional, machine/vehicle number: Nilfisk Industriesauger R104 V 4031600000, R104 X Dcjdpfow D Upzjx Adujr Product number: 4031600006 The industrial vacuum cleaners of the R series are designed for extracting offcuts, cutting dust, and all types of production waste (such as plastic, paper fragments, or fabric scraps) and compacting them to facilitate their return to the recycling process. Originates from a cleanroom plastic granulate production Industrial vacuum cleaner for compressible material The R series industrial vacuum cleaners are engineered to remove and compact offcuts, cutting dust, and all kinds of manufacturing waste (plastic, paper fragments, or fabric offcuts) so these materials can be reintroduced into recycling cycles. • Reduced downtime through continuous cleaning • Compaction and easy removal of extracted material • Dust removal for work environments • Return of trim material to production • Flexible thanks to a variety of power classes • Container sizes are maintenance-free • Easy inspection • Operation possible without supervision.

Condition: as good as new (ex-display), Remark: This is a II. Wahl product, new product unused. II. Wahl means there may be dust deposits, minimal scratches or dirt or dirt may be present. Technical data for the unit carrier: Manufacturer: SSI Schaefer Rack system: R 3000 Included in delivery are: 02x shelf beams, II. choice (new goods) Material color: sendzimir galvanized Type: KTRZ 31036 Z-profile: 60 x 40 x 12 mm clear width: approx. 994 mm perforated grid: approx. 53 mm agraffe: 3 HK (hooks) weight | pcs.: 1,700 kg max. load per truss pair 200 kg with evenly distributed load 02x unit truss, II. choice (new goods) material color: sendzimir galvanized total length: approx. 780 mm clear span: approx. 715 mm dimension: approx. 40 x 35 mm (WxH) material thickness: approx. 1,50 mm 01x wooden shelf, II. choice chipboard width: approx. 985 mm chipboard depth: approx. 717 mm material depth: 22 mm Dsdpfjn Hqq Rsx Aduscr Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is offered for pickup only. A desired transport or shipment of this or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us.

Condition: new, Year of construction: 2025, load capacity: 2,000 kg, 3-axis rotary and tilt positioner, 2000 kg load capacity, clamping plate diameter 0.8 meters. Proven in the fields of construction and agricultural machinery, commercial vehicles, industrial trucks, as well as in aerospace and energy technology. Suitable for welding, assembly, machining, etc. Featuring a stable and robust design, flexible positioning across three axes (including overhead), and easy operation, these positioners simplify welding, assembly, and handling of large workpieces. Advantages: - Faster production, increased productivity - Optimal workpiece positioning improves weld quality and allows for higher deposition rates - Enhanced safety; dangerous crane handling is significantly reduced - Positioning on up to three axes simultaneously without cumbersome re-clamping - Simple operation and ergonomic design protect and relieve the operator - Flexibility through modular adaptability and custom special versions available Operating principle: The rotary arm axis is positioned above the clamping plate, so the rotary arm acts as a counterweight to the workpiece. As a result, these machines are much more powerful than standard rotary-tilt tables or rotary-tilt positioners. This principle enables the handling of the specified loads in any position. Endless rotation of the two rotary axes and additional height adjustment allow for all workpiece orientations (including overhead). Turntable speed is infinitely variable from 0.05 to 0.6 rpm. 2000 kg load capacity. - Wireless hand remote control - Continuous 360° rotation - Continuous 360° tilting - Stroke: 1000 - 1500 mm Dcsdpfx Adexbhp Hsuor - Arm reach radius: 1.2 meters

Condition: good (used), Polar Mohr RA 2 jogger with Roller The machine is 100% functional, in very good condition. This is the latest design from a German manufacturer, currently in production. Technical data: Max format: B2+ Stack height: 150mm Dcodpfx Aswxtabsduer Weight: 450kg Power supply: 400V Air squeezing roller Air table Possibility of shaking to the right/left Adjustable angle of inclination Adjustable shaking frequency (on the inverter) Adjustable force and speed of the air squeezing roller. Chrome table surface Documentation