Used Gesan Dvs 140 for sale (4,633)

Condition: excellent (used), functionality: fully functional, fuel type: diesel, empty load weight: 1,411 kg, overall weight: 3,500 kg, axle configuration: 4x2, suspension: steel, total length: 5,986 mm, total width: 2,040 mm, Year of construction: 2021, MAN TGE 3.140 35, 140 hp, 2.0, standard van model – year 09/2021 – engine capacity 1968 cc, 103 hp – 140 kW – 149,647 km – payload 1411 kg – ABS – air conditioning – electric windows – radio – central locking. For further information, contact Francesco: 3356514297. Ijdpfx Adszrw T Ao Nebc

Condition: used, functionality: fully functional, With this offer, you are purchasing a second-hand “Konica Minolta AccurioPress C14000” colour production system Items for sale: 1 x Konica Minolta AccurioPress C14000 with the following specifications: Includes 2 x PF-712 paper decks Includes EFI Fiery Controller Includes FS-541 stapling finisher Includes duplex ADF / R-ADF Includes IQ-501 integrated Colour Care unit Includes UK-301 Auto Inspection Unit for IQ-501 Includes VI-514 interface for IQ-501 Not the right configuration? It’s no problem to configure the machine to your requirements. Please feel free to contact us! Counter readings: Total: Approx. 8,287,028 pages Black: Approx. 1,141,608 pages Colour: Approx. 7,145,420 pages Condition: This is a second-hand machine, which may show signs of wear Ibedpfx Asz Anxked Nec (minor scratches or yellowing). The device has been tested to ensure it is in working order A test printout can be seen in the photo Packaging and dispatch: You are welcome to view the device during our opening hours. Please arrange an appointment to do so! Seaworthy packaging and worldwide dispatch available on request! Before dispatch or collection, a functional test will be recorded on video for you. For further information, you are of course welcome to contact us directly.

Condition: as good as new (ex-display), functionality: fully functional, Demonstration machine For sale is our Felder RL-140 clean air extraction unit from our showroom, with a maximum air volume flow of 2,500 m³/h. The extraction unit is in like-new condition and has been inspected and serviced by our professional staff. Technical data: Ibodjxdkw Eopfx Ad Nec - H3 dust-tested - Extraction connection diameter: 140 mm - Extraction can be configured for right or left side - Manual chip shaker - 10 m² filter area - Max. air volume flow: 2,500 m³/h - Minimal footprint: 1,040 x 898 x 1,940 mm (L x W x H) The clean air unit is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: extraction, extraction unit, clean air unit, clean air, RL Reference: R-A0117

Condition: good (used), Weiss climate testing chamber with seat pulsator Manufacturer: Weiss Type: SD 1400/+20 DU Test chamber: Material: Stainless steel Dimensions: Height approx. 800 mm Width approx. 2000 mm Depth approx. 900 mm Volume: 1440 liters Outer housing Material: Double-coated Zincor sheet Dimensions: Height approx. 2000 mm Width approx. 2200 mm Depth approx. 2000 mm H x W x D 2000 x 2200 x 2000 mm Paint finish: Light grey (RAL 9002) Door, double-leaf: Hinged on the left and right Equipment: Pass-through in the floor and ceiling: 2 each, DN 100 mm, for inserting the pulsation tables Pass-through in the side walls: 1 each, left, right, 100 mm Refrigeration unit: Air-cooled Control: Digital measurement and control system DMR Basic control panel: Integrated into the main switch panel Interface: RS 232 C, for connection to a PC Software: Operating software for MS-Windows Performance data: Temperature range without climate control: +20...+100 °C Temperature stability without climate control: +0.2 … +0.5 K (time-dependent) depending on the range, in the steady state Temperature range with climate control: 20...+95 °C Temperature stability with climate control: +0.2 … +0.5 K (time-dependent) depending on the range, in the steady state Dew point range: 20...+94 °C Humidity range: 10...98 % RH Humidity stability: +3 ... +5 % RH, depending on the range, in the steady state Temperature change rate measured in the outlet without a test specimen and without a load - Cooling: 0.5 K/min. on average, between +100 and +20 °C - Heating: 0.5 K/min. on average, between +20 and +100 °C The performance data refer to an ambient temperature of max. +25 °C and the specified rated voltage For trouble-free operation of the system, the ambient temperature must be between +10 and +35 °C Connections / Other Protection class: IP 32 for the control cabinet Sound pressure level during free-field measurement at a distance of 1 m in front of the device: 60 dB (A) Humidification water: fully demineralized, conductivity max. 20 μS/cm, pH value 6 - 7, automatic topping up Condensate drain: back-pressure-free, 3/4" hose connection Power connection: 400 V; 3 PH+N PE; 50 Hz Connected load: max. 10 KVA Weight: approx. 1160 kg Seat testing device with steel structure for mounting and securing to the climate testing chamber, including: • 2 pneumatic weight lifting devices (150 mm stroke) for test specimen change, 12 weights each weighing 5 kg • 1 base frame in normal steel welded construction for attachment to the underside of the climate testing chamber. This frame is provided on all sides with removable sheets and has 2 folding doors for adjusting the eccentricity. These doors have safety switches. Ibedpfsxbgrgjx Ad Nsc • 2 eccentric disks with bearings and tachometer, 2 connecting rods, 2 ball guides • 2 mounting tables, perforated, 20 mm grid, 650 x 650 mm, for connecting the test specimens, made of aluminum, thickness min. 10 mm • 2 mounting plates, perforated, 20 mm grid, 200 x 200 mm, for connecting the buttocks replica • 2 load rods, 600 mm long, made of stainless steel (The connection to the test specimen is not included in our price, but can be offered subsequently after a precise definition) • 2 three-phase motors, 2 belt drives with tensioning devices • 1 pneumatic control system with 2 manual valves, one filter-regulator unit and one shut-off valve, 1 electrical control cabinet with 2 SEW frequency inverters, hand switch, emergency stop button, 2 push buttons,

Condition: used, Technical details: floor-plate length: 255 mm Plate thickness: 65 mm very good steel plate for sale free, packed in oiled paper and foil Surface ground Ra 0.8 according to drawing T-slots according to DIN 650: a=36; h=65; b=60 c=26mm, chamfered approx. 1.5mm Distance from edge: 100mm; center distance: 100mm (without attached 4x swivel hoist ring) Ibsdpeu N D Icefx Ad Noc *

Condition: excellent (used), functionality: fully functional, mileage: 35,819 km, fuel type: diesel, overall weight: 3,000 kg, axle configuration: 2 axles, fuel: diesel, energy efficiency: D, color: white, driver cabin: other, gearing type: mechanical, number of gears: 6, emission class: euro6, suspension: steel, number of seats: 3, total length: 5,986 mm, total width: 1,780 mm, total height: 1,950 mm, Equipment: ABS, airbag, VOLKSWAGEN CRAFTER 30 2.0TDI 140 HP PMTA – YEAR 10/2023 – 35,089 KM EURO 6D – 1968 CC – 103 KW – 140 HP – INTERNAL LENGTH 3,300 mm – WIDTH 1,780 mm – INTERNAL HEIGHT 1,950 mm – PAYLOAD 884 kg – ABS – AIR CONDITIONING – ELECTRIC WINDOWS – RADIO CD – OVERHEAD SHELF – NAVIGATION SYSTEM – For info: Francesco 3356514297 Ibsdpfxsydnyle Ad Noc

Condition: excellent (used), 284 USED Erka Pastry Beater. EXTERNAL DIMENSIONS (in cm): - height: 135, Ibodpfjyfhivox Ad Nec - width: 45, - length: 60, - bowl diameter: 31, - bowl height: 27. The price is a net price WE SPEAK IN ENGLISH, GERMAN, FRENCH, RUSSIAN, UKRAINIAN.

Condition: good (used), Year of construction: 2009, functionality: fully functional, conveyor belt length: 6,500 mm, conveyor belt width: 800 mm, total length: 21,500 mm, input voltage: 380 V, MACHINE: Telescopic Boom Conveyor FIRE: FMH Conveyors. Best Reach Ijdpfxewhc Ugs Ad Nsbc TYPE: BR4140 YEAR: 2009 LENGTH RETRACTED: 6.5m LENGTH EXTENDED: 21.5m

Condition: good (used), S006901 MANUFACTURER: Kaeser MODEL: DS140 SERIAL NO.: 142860 YEAR: 1996 Ibedpfxsyaq E Ao Ad Nec POWER (kW): 75 CAPACITY (m3/min): PRESSURE (bar): 7.5

Condition: new, Rollmak 3-Roll Round Bending Machine SME 140-20/4.5 Special equipment included in the price: hardened rollers motorized rear roller adjustment digital display Sheet metal width 2050 mm Ibodelu Eumjpfx Ad Nec Sheet metal thickness 4.5 mm max. Sheet metal thickness 4.0 mm for pre-bending Roller length 2050 mm Roller diameter 140 mm Smallest bending diameter 210 mm Weight 1550 kg Dimensions L-W-H 3150 x 900 x 1200 mm Motor: 2.2 KW Equipment: Top and bottom rollers electrically driven Top roller can be swiveled out Conical bending device asymmetrical roller arrangement self-braking main motor separate control and operating panel safety cable Values apply to St-37 / 240 N/mm² CE marking

Condition: new, Description:Vacomat 140/160 XPe- The Vacomat 140/160 XPe mobile dust extractor is our smallest model and ideal for single machine extraction. Air volumes of up to 1,593 m³/h can be conveyed with this extraction system using the vacuum method,e.g. for dedusting sliding table saws, jointers or thicknessers.- In the standard version, extraction is started manually at the push of a button. On request, an automatic start of the fan can be installed when the connected processing machine is switched on,so that the extraction system is not forgotten or unnecessarily operated in idle mode.- The dust and chip mixture is discharged into a dust-tight chip collection container (240 l) with an inserted plastic bag. A vacuum channel holds the plastic bag securely in the collection container.- The Vacomat 140/160 XPe mobile dust extractor automatically monitors its extraction performance via a pressure load cell and ensures maximum operational filter cleaning system- In the Vacomat 140/160 XPe, an integrated control cabinet ensures that the filter bags are cleaned electro-mechanically via a vibrator motor.- The control system is activated by querying the woodworking machine using potential-free contacts. As soon as all connected machines are switched off, the motorized filter shaking starts automaticallyNo connection to compressed air and therefore no compressor is required for this regeneration mechanism. This results in a significant reduction in the noise level during cleaning.- An efficient pressure shock cleaning system (XPe-D) is available as an option, especially recommended for very high and particularly fine dust content (ATTENTION: overall height then 100 mm and length 280 mm).Cleaning via the compressed air tank takes place offline, after extraction UKOCONE FILTER- The Vacomat 140/160 XPe mobile dust extractor is equipped with patented SchukoCone® filter bags as standard.- The SchukoCone® filters are a successful combination of an externally loaded filter bag with an internally loaded cone. This innovative filter design offers approx. 60 % more filter surface area with a smaller surface area requirement.- SchukoCone® filter bags unfold their enormous potential particularly with fine dusts, where a large filter surface area and low filter surface load must be ensured.- By reducing the filter surface load, a longer service life of the filter is achieved. If the filter resistance is low, less fan power and therefore less electricity is EMBLY Ibedovwflnspfx Ad Nsc

Condition: new, Fastech 3-Roll Round Bending Machine FRS 1250 x 140 Technical Specifications: Special equipment included in the price: Iedshzq Dxepfx Ad Nobc hardened rollers motorized rear roller adjustment motorized lower roller adjustment 2 x digital display Sheet metal width 1250 mm Sheet metal thickness 5.5 mm max. Sheet metal thickness for pre-bending 5.0 mm Roller length 1250 mm Roller diameter 140 mm Smallest bending diameter 210 mm Weight 1365 kg Dimensions L-W-H 2020 x 900 x 1200 mm Motor: 2.2 kW Equipment: Top and bottom rollers electrically driven Top roller can be pivoted outwards Conical bending device Asymmetrical roller arrangement Self-braking main motor Separate control and operating panel Safety cable Values apply to St-37 / 240 N/mm² CE marking

Condition: new, Fastech 3-Roll Round Bending Machine FRS 2050 x 140 Technical Specifications: Special equipment included in the price: hardened rolls motorized rear roll adjustment motorized lower roll adjustment 2 x digital display Sheet metal width 2050 mm Sheet metal thickness 4.5 mm max. Sheet metal thickness 4.0 mm for pre-bending Roll length 2050 mm Roll diameter 140 mm Smallest bending diameter 210 mm Weight 1530 kg Dimensions L-W-H 3240 x 900 x 1200 mm Motor: 2.2 kW Equipment: Top and bottom rolls electrically driven Top roll can be swung out Taper bending device asymmetrical roll arrangement self-braking main motor separate control and operating panel Safety cord Values apply to St-37 / 240 N/mm² Ijdpfx Ashzq D Hjd Nebc CE marking

Condition: used, travel distance X-axis: 7,000 mm, travel distance Y-axis: 4,000 mm, travel distance Z-axis: 900 mm, spindle speed (max.): 1,200 rpm, feed rate X-axis: 900 m/min, Ø quill: mm. 140 Spindle taper : ISO 50 travel X : mm. 7000 travel Y: mm. 4000 Cross travel Z RAM: mm. 900 Quill travel W: mm. 900 Rotary table: mm. 1800x1800 load admitted on table: Ton. 10 Table rotation: °.pos. Isdpfjt Rkcuox Ad Nobc Table long.travel (AxisV): mm. 1500 Spindle speed : RPM. 1200 Spindle motor: Kw. 70 CNC ECS 2101 N°2 milling square heads N.2 Floor plate 6000x2000

Condition: used, Year of construction: 2016, operating hours: 3,100 h, fuel type: diesel, mast type: telescopic, Machine ready to work Feel free to contact me Iodpfxouqu Rij Ad Njbc

Condition: used, Rotary vane vacuum pump, oil-lubricated, single-stage Status: used, inspected, functional Manufacturer: Rietschle Ibodpfx Adscnpnve Nec Type: CLFH 141 (01) Motor: 400V Operating fluid: Mineral oil Nominal suction capacity: 140 m³/h Ultimate pressure:

Condition: new, Year of construction: 2026, Equipment: cabin, Painting/Spraying Booth The Reinox 300x140 professional painting/spraying booth is designed for partial painting and spraying in production facilities where controlled filtration and safety measures are required in environments with explosive materials (ATEX). Thanks to its powerful extraction system and three-stage filtration, a clean working environment is ensured even during intensive operation. De Dsia Ta Hskryqzeci !! This is always a new machine (photo from customer installations). We are the manufacturer. !! Technical specifications: - Fan is certified for ATEX zone 22 - Extraction area: 3,000 x 1,400 mm - Power supply: 400 V / three-phase - Control: frequency inverter – stepless power control via a potentiometer on the control panel. Ibsdpfx Aezkfnrod Nsc - Filtration: three-stage filter Certifications & documentation: CE, ATEX, complete technical documentation Warranty: 12 months It is possible to order machines in various individual configurations and sizes! Do not hesitate to contact us.

Condition: used, mileage: 137,192 km, power: 103 kW (140.04 HP), first registration: 11/2020, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 12/2026, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 5,413 mm, total width: 2,050 mm, total height: 2,522 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Fiat Ducato Panel Van 35 140 HP L2H2 * Euro 6 emission standard * Panel van L2 H2 (medium wheelbase, high roof) * 6-speed manual transmission * Wheelbase: 3,450 mm * Tow bar (trailer hitch) 2,500 kg * Air conditioning * Multifunction steering wheel * On-board computer * Sliding door on the right * Rear swing doors Ibodewqy R Djpfx Ad Njc Special equipment: Passenger side airbag, Techno dashboard, electrically adjustable and heated exterior mirrors, electronic parking assist, rear wing doors (opening angle 260/270 degrees), infotainment system: UConnect with CD and MP3 player, partition wall in load compartment, full wheel covers, mud flaps rear, mud flaps front Other equipment: Driver's airbag, brake assist, driver assistance system: Adaptive load control (LAC), rear wing doors without glazing, body type: high-roof panel van, variant: high-roof, fuel tank: 75 liters, heated crankcase ventilation, engine: 2.3-liter - 103 kW Turbo Diesel Multijet, low emissions according to Euro 6d-TEMP, cab seating: double passenger seat, Start/Stop engine system, lightly tinted windows Subject to prior sale and errors! Sale exclusively under our terms and conditions (AGB) Important notice: Despite carefully checking all details in our offer, errors may occur. Some may be due to data transmission errors between various platform providers. Therefore, all information is provided without obligation and does not constitute a legal claim. Legal notice: This sales listing does not constitute an offer within the meaning of §145 BGB (German Civil Code). Rather, it contains information about possible contract initiation. All details are provided without guarantee and do not constitute warranted characteristics.

Condition: good (used), Year of construction: 1993, HENKE VARIANT 140/120, dual-feed machine, year of manufacture 1993, 2 moulds, new control system Ibjdpfx Aoxl S Uhsd Nec

Condition: new, roll diameter 350 mm 110 mm bending speed 1-5 m/min Bending capacity 157 Wcm³ Ibsdpfsy H N Hgsx Ad Nec total power requirement 7,5 kW weight of the machine ca. 2950 kg Domestic equipments: - Direct drive of all three shafts - Single delivery of the side rollers - Horizontally and vertically usable - Hydraulically movable side rectifier (via control panel) - 2 digital displays for the feed rollers - Hardened rollers - Mobile control panel

Condition: new, Year of construction: 2026, total length: 2,480 mm, Scissor platform Magni ES 1409AC+ Drive Electric Year built 2026 Work height (mm) 14,000 Iodjy Abgdepfx Ad Nobc

Condition: used, mileage: 1,001 km, first registration: 01/1991, color: black, driver cabin: other, gearing type: other, Year of construction: 1991, Equipment: crane, Vehicle location: Bovenden, rear-mounted crane, emergency stop, foldable, 2-point mechanical outriggers, 3 hydraulic extensions. Load chart: 2m-5800kg, 4.4m-2800kg, 6.3m-1940kg, 8.3m-1440kg, 9.9m-1030kg! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! Iodpfxszd Tkho Ad Njbc

Condition: used, Used Oliver & Batlle approximately 1,400 litre capacity 304 stainless steel vertical reactor. Unit has welded dished top and bottom heads. Approximately 1,300mm diameter x 1,100mm straight side. Internal rated atmospheric design pressure at 50 deg.c. Has external half pipe coil stainless steel jacket rated 5 bar design pressure at 90 deg.c. Unit includes top entry stainless steel 2-tier agitator driven by 30kw motor.gearbox. Unit is mounted on side support lugs. Specifications: Capacity: 1,400 L Type of Stainless: 304 Stainless Steel Internal Pressure: 0 PSI Internal Temperature: 50°C Jacket Pressure: 5 bar Jacket Temperature: 90°C Legs/Lugs: Lugs Ibedpfezvyliox Ad Noc

Condition: used, functionality: fully functional, With this offer, you are purchasing a second-hand ‘Summa 500-9462 1400W’ production system Item for sale: 1 x Summa 500-9462 1400W Compatible with: Summa F1432 Summa F1612 Summa F1832 Summa F3220 Condition: This listing is for a second-hand device, which may show signs of wear (minor scratches or discolouration). The device has been tested to ensure it is in working order. A test print can be seen in the photo Packaging and dispatch: Iedpfjzb Aktex Ad Njbc You are welcome to view the device during our opening hours. Please arrange an appointment to do so! Sea-worthy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: good (used), Year of construction: 1993, operating hours: 3,800 h, functionality: fully functional, overall weight: 10,500 kg, fuel type: diesel, power: 1,299 kW (1,766.15 HP), motor manufacturer: Deutz, A used emergency generator is offered with the following data. Technical data: Engine: Deutz TBD 620 V12 Generator: Piller Power: 1400 KVA Frequency: 50 Hz Voltage: 230/400 V Year of manufacture: 1993 Operating hours: 3800 Ijdpfovmzwxjx Ad Nebc Incl. control cabinet Incl. silencer