Used Rotair Mdvs 200 P12 for sale (40,157)

Condition: used, Year of construction: 1962, pressure 025 t throat 200 mm stroke 8 - 80 mm no. of strokes 180 /min distance table/ram, max. stroke up, adjustment up 330 mm table surface area 550 x 400 mm hole in the table 60 mm table height over floor 800 mm passage to the back 200 mm ram surface 355 x 220 mm ram adjustment 50 mm power requirement 2,7 kW weight 2,5 t Gsdpfx Aovuudned Ajkf dimensions (WxDxH) 1,2 x 1,8 x 2,4 m permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with motor, pneumatic clutch, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, inclineable, manual central lubrication, two-hand and foot operation as is where is, WITHOUT putting into operation Price for commissioning (in given condition) on request

Condition: ready for operation (used), Year of construction: 2004, This COMAU C4G NH4 – 200 robot arm was manufactured in 2004. It is part of a set of 4 refurbished industrial robots, fully serviced and in excellent working condition. These units have been mechanically and electronically overhauled, ensuring reliable performance. Ideal for automation, assembly, or handling applications. Contact us for more information about this machine. Application Types Robotics Gjdpfx Asx D Dt Hjd Aokf

Condition: good (used), Year of construction: 1998, Robot Kuka KR125/150/200 Gsdpfobywf Dox Ad Askf Manufacture Date 1996/1998 Reach 2400 mm Weight 975 kg/1025 kg Payload 125 kg, 150 kg, 200 kg Controller Type VKRC1 (VW/Audi Version) Weight 136 kg Software Version 4.1.7 SP08 Teachpendant Kuka VKCP1 Cable length 7m Larger number of pieces available Large volume sales preferred !

Condition: used, machine/vehicle number: 007307, Max. working width: 3200 mm Max. working thickness: 60 mm Gkodpfxjuaq D Ao Ad Asf

Condition: good (used), Here we offer you a S & A test chamber for parametric testing. Gjdpfjcnic Dex Ad Aokf Temperature range -55 ° C to 200 ° C (LCO2) -65 ° C to 200 ° C (LN2) Temperature change rate 15° C / min (Standard Option) 60° C / min (Fast Option) Stability ± 0.2 ° C (including effects of mains voltage, ambient temperature between between 15° and 45° C and aging) Uniformity ± 1.0 ° C Max from -65 ° C to -55 ° C ± 0.5 ° C Max from -55 ° C to + 125 ° C ± 1,0 ° C Max from + 125 ° C to + 200 º C Coolant: LCO2 Chamber can be controlled remotely via IEEE bus or RS232C interface Weight approx. 61 kg Type: 4365A Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, details are reserved!) Further questions we can answer gladly on the phone for you.

Condition: new, functionality: fully functional, overall weight: 32 kg, total length: 480 mm, total width: 560 mm, total height: 400 mm, power: 2.2 kW (2.99 HP), volume flow: 12 m³/h, pressure (max.): 10 bar, We sell oil-free piston compressor OF P 3/200 with direct power transmission. Gsdpfsx E Th Sjx Ad Aekf Features: capacity: 200 l/min engine power: 2.2 kW max. pressure: 10 bar dimensions (lxwxh) (mm): 480 x 560 x 400 weight (kg): 32 kg Images are symbolic. Warranty: 24 months Parity: EXW Logatec Price does not include 22% VAT

Condition: excellent (used), functionality: fully functional, Universal testing machine for material testing / material inspection Testing of tensile strength, bond tensile strength, and shear strength of masonry & wood joints, and similar applications. - Nail pull-out test Godpfjxmv H Rsx Ad Aekf - Compression test on cement and mortar prisms - Flexural test on cement and mortar samples - Compaction test - Flexural test on wood, concrete - Shear strength test on wood - Splitting tensile strength test on wood - Scaffold connection test - Shear strength test on masonry - Tensile test on masonry - Tensile test on reinforcing steel - Tensile test on wood - Pull-out test on reinforcing steel - Reverse bending test on reinforcing steel - Dowel pull-out test - Adhesion tensile test I have made a video demonstrating the machine's operation. I can send this video to a mobile number via WhatsApp or Signal!

Condition: good (used), Year of construction: 1997, Offer 25494 Gkodpfox A Tphsx Ad Aef Technical Data: - Working width: 4100 mm - Press force: 200 t - Distance between uprights: 3670 mm - Table width: 200 mm - Throat depth: 330 mm - Installation height: 450 mm - Approach speed: 70 mm/sec - Working speed: 7 mm/sec - Return speed: 80 mm/sec - Ram stroke: 250 mm - Adjustable stops range: 120 mm - Drive: 380 V / 25 kW - Space requirement: approx. W 4500 x H 2950 x D 2100 mm - Weight: approx. 16,500 kg - With: - Swivel arm operating panel with Easybend 2D-T control - Motorized backgauge - Various bending tools - Operator panel, foot switch,

Condition: used, This listing is for a BioRad Model 200 / 2.0 Power Supply Gedpfxjxzhkwe Ad Askf

Condition: excellent (used), Year of construction: 2007, screw diameter: 55 mm, displacement volume: 618 cm³, injection pressure: 2,183 bar, injection weight: 562 g, mold height (min.): 400 mm, ejector stroke: 180 mm, Engel VC 1350/200 Tech Gedpsx Az Ekjfx Ad Askf Clamping force: 200 tons Year of manufacture: 2007 Weight: 14,200 kg Dimensions (L x W x H): 6.3 x 1.9 x 2.3 m Injection unit: .../1350 Screw diameter: 55 mm Injection volume: 618 cm³ Shot weight (for PS): 562 g Specific injection pressure: 2,183 bar Mould clamping system: 200/... Mould platen dimensions: 860 x 570 mm Mould installation height: 400 mm Opening stroke: 750 mm Maximum platen distance: 1,150 mm Ejector stroke: 180 mm Ejector force: 80 kN Equipment: - 2 × hydraulic core on moving platen - Pneumatic valve - 8 hot runner zones - 8-section rotameter

Condition: excellent (used), Here we offer a SUN-TEC cleanroom heating plate. SUN-TEC cleanroom heating panel Cleanroom workstation with heating plate 1600 mm x1200 mm x2200 mm Nomination: AC 200V 3 phases 50Hz 30A Max temperature: 200°C Type: Y9AT417 Condition: used/used Gkedod Nfq Sepfx Ad Aof Delivery: (See picture) (Changes and errors in the technical data, information is reserved!) We can answer more questions on the phone for you.

Condition: good (used), Wolfking SFG 850/200 Grinder Manufacturer: Wolfking Power Supply: 22 kW Head: 200 mm Hopper Capacity: 850 liter Gjdpfjucdidox Ad Askf Capacity: +/- 6.000 kg/hour Machine Dimensions LxWxH: 1.600x1.700x2.100 mm Machine Weight: 1.000 kg.

Condition: good (used), Internal article no.: 24080 Hydraulic machine vice Manufacturer: Hilma Jaw width: 200mm Max. clamping width: approx. 340mm Gsdpfsuxbwgsx Ad Askf Dimensions (LxWxH): 70x30x17cm Weight: approx. 120Kg

Condition: used, High-pressure clamp vise MC2 / 200 Gksdpevf N Uvsfx Ad Aof ORIGINAL PRICE: ~ $1,650.00 Description: - Body made of cast iron FCD 65, jaws made of steel - Ground on the bottom and sides - Anti-lift mechanism - Built-in pull-down mechanism - Mechanical force amplification, seal-free and maintenance-free - Short design - Clamping force can be preset Technical data: Jaw width: 200 mm Vise opening: 300 mm Jaw height: 55 mm Dimensions: 600 x 180 x 210 mm Weight: approx. 90 kg

Condition: used, HERBOLD single-shaft shredder EWS 45/200 With pressing device (pendulum arm) Working width 2000 mm Gjdpfxjxgtp Aj Ad Ajkf Rotor diameter 450 mm Drive 2 x 90 kW Machine in very good condition, ready for operation

Condition: good (used), Clamping bracket, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Clamping cube: heavy version -Length: 665 mm -Material: Cast iron -Bores: Ø 28 mm, groove 228 x 28 mm Gsdpfxexrk Iyo Ad Askf -Dimensions: see photo -Quantity: 2x mounting cubes available Price: per piece -Dimensions: 300/200/H100 mm -Weight: 15 kg/pc.

Condition: excellent (used), CTS test cabinet climatic chamber Here we offer a CTS climatic chamber. Air cooled Test chamber volume: 200 liters Test chamber dimensions: Height 750, width 650, depth 400 mm External dimensions: Height 1800, width 920, depth 1345 mm Temperature working range temperature range: -40°C / +180°C cooling speed: 4 K / min heating speed: 4 K / min Max. heat radiation at +20°C: 3500 W Temperature constancy, temporal: ≤± 0.3 K. Climate working range Temperature range: +10°C to +95°C. Humidity range: +10%to +98% r.H. Connection: 400 V +6% -10%, 3/N, 50 Hz Godpfxohwhzws Ad Askf Rated current 9.4 A Rated power 4,8 kw Weight: approx. 450 kg Refrigerant R404A Type: CTS C-40/200 The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. new filling with legally compliant refrigerant 3. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: ready for operation (used), Chip conveyor, chip transporter, Knoll 320 S-1/200, Used Machine Manufacturer: Knoll Type: 320 S-1/200 Overall Dimensions: Gsdpfx Aoxtwqdod Askf Width: 6200 mm Depth: 1300 mm Height: 1610 mm Belt Specifications: 480 x 130 x 60 x 310 mm Belt Speed: 1.8 m/min Year of Manufacture: 2015 Discharge Opening Size: 550 x 530 mm Hopper Opening: 3120 x 410 mm Slat Pitch: 315 mm

Condition: refurbished (used), functionality: fully functional, power: 55 kW (74.78 HP), overall weight: 6,000 kg, Year of construction: 1921, briquette diameter: 90 mm, year of last overhaul: 2025, Complete lines with presses in top condition! 2 x Pawert / 3 x Di Più MB100 Motor approx. 55 kW, Capacity approx. 1,400 kg/h, Press cylinder approx. 90 mm (with or without hole!), Preheated to approx. 60°C (circulation system with heat recovery via oil tank), Automatic crosscut saw, fully automatic feed, including control cabinet Packaging system Consisting of: 1 rubber conveyor belt (briquette infeed); followed by shrink tunnel system, 400 V, shrink tunnel passage length approx. 1,600/600 mm, height up to max. 200 mm, roller outfeed approx. 3 m Pre-bin (silo approx. 20 cbm for feeding the press) Gjdpjxdrz Eefx Ad Aokf

Condition: used, thickness of jaw 200 mm weight 106 kg distance of clamping jaw max. 195/382 mm dimensions of the machine ca. 870/1230 x 200 x 170 mm Gksdpfxsrtciie Ad Ajf Note: without crank !

Condition: used, HERBOLD single-shaft shredder EWS 45/200 With pressing device (pendulum arm) Working width 2000 mm Rotor diameter 450 mm Gksdpfx Adjxgq S Uj Aef Drive 2 x 90 kW Machine in very good condition, ready for operation

Condition: good (used), Clamping bracket, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box Godpfjxrkvkex Ad Aekf -Clamping cube: heavy version -Length: 665 mm -Material: Steel -Quantity: 2x mounting cubes available Price: per piece -Dimensions: 665/200/H250 mm -Weight: 117 kg/unit

Condition: excellent (used), Here we offer a temperature shock test chamber. with 100 liters of usable space for larger test specimens up to 30 kg. Compliant with all current international standards. Water cooled Temperature range hot chamber: +60 °C to +200 °C Temperature range cold chamber: -70 °C to 0 °C Gkedpen Smtmofx Ad Aef Test chamber dimensions: 710 x 345 x 410 (W x H x D) in mm External dimensions: 1100 x 1885 x 1965 (W x H x D) in mm Water-cooled refrigeration unit Program control via touch panel Automatic defrost Overtemperature protection Operating hours counter Mobile version 2 test material baskets made of stainless steel Cable gland Ø 100 mm Refrigerant: 3 kg R404A 1kg R23 Power supply: 400V 3Ph 50Hz Max. Current consumption: 32A Type: TSD-100 Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Year of construction: 2020, operating hours: 500 h, functionality: fully functional, machine/vehicle number: 014707, clamping force: 350 kN, As new! Fully functional machine. Extensive equipment: 2x limit switches / 2x air blow valves / EM13 / interface for water temperature control units / bi-metal / separating flap / B&R Smartmold control unit. Gksdpextmrdjfx Ad Asf

Condition: used, HERBOLD single-shaft shredder EWS 45/200 With pressing device (pendulum arm) Gsdpfx Adsw Rw U Eo Aokf Working width 2000 mm Rotor diameter 450 mm Drive 2 x 90 kW Machine in very good condition, ready for operation