Used Stäubli Robot for sale (54)

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: F16/56XTA1/A/01, overall weight: 1,120 kg, load capacity: 100 kg, input voltage: 400 V, type of input current: three-phase, Stäubli TX200 industrial robot including CS8CHP controller and Stäubli teach pendant – manufactured in 2016. We are offering a used Stäubli TX200 industrial robot for sale, including the original Stäubli CS8CHP controller. Technical specifications: Manufacturer: Stäubli Model: TX200 Controller: CS8CHP Year of manufacture: 2016 Payload: 100 kg Condition: Used Godpozli Husfx Ahdjbu Scope of delivery: Stäubli TX200 robot Original Stäubli CS8CHP controller Stäubli teach pendant Connection cable Operating manuals Scope of delivery as shown in the photos The robot comes from an industrial research and development environment and has been carefully maintained. The system was in operation until it was dismantled. Inspection is possible by appointment. We will gladly send you further photos or technical information upon request.

Condition: excellent (used), Year of construction: 2023, Stäubli TS2-40 SCARA Industrial Robot Manufacturer: Stäubli Faverges SCA Type: TS2-40 Robot Year of Manufacture: 03/2023 Machine Type: 4-Axis SCARA Industrial Robot Controller: Stäubli CS9-TS2-40 For sale is a used Stäubli TS2-40 SCARA industrial robot with CS9 controller. This compact robot system has been designed for fast and precise pick-and-place, assembly, handling, and automation tasks. Godpfezlq E Sox Ahdsbu The system is suitable, among other applications, for electronics manufacturing, machine assembly, packaging technology, laboratory automation, quality assurance, and general industrial applications. Technical Data: Manufacturer: Stäubli Faverges SCA Model: TS2-40 Robot Type: SCARA Robot Number of Axes: 4 Robot Year of Manufacture: 03/2023 Reach: 460 mm Rated Payload: 2.4 kg Maximum Payload: 8.4 kg Z-Stroke: 200 mm XY Repeatability: ±0.01 mm Z Repeatability: ±0.004 mm Rz Repeatability: ±0.002° Mounting Type: Floor Mounting Performance Data: Maximum Speed Axis 1: 550°/s Maximum Speed Axis 2: 720°/s Maximum Speed Axis 3: 2,500 mm/s Maximum Speed Axis 4: 2,500°/s Cycles per Minute: up to 240 Power Consumption according to VDMA 24608: approx. 0.397 kW Controller: Manufacturer: Stäubli Type: CS9-TS2-40 Controller: CS9 Controller Year of Manufacture: 03/2023 Controller Version: Rackable Supply: 1 × 230 V AC / 50–60 Hz Connection Power: 1,700 VA Communication: Ethernet / PROFINET Device Software: VAL 3 activated Equipment: Stäubli TS2-40 SCARA Robot Stäubli CS9-TS2-40 Robot Controller Original Robot Connection Cable (Robot ↔ Controller) Pneumatic and Electrical Connections in Robot Arm Ethernet Interface PROFINET Interface VAL-3 Programming System End-of-Arm Tooling according to Images Accessories according to Images Dimensions: Maximum Reach: 460 mm Z-Stroke: 200 mm Dimensions CS9 Controller (H × W × D): approx. 270 × 445 × 365 mm Shipping Data: Robot Weight: approx. 38 kg Controller Weight: approx. 30 kg Total Weight: approx. 68 kg Shipping Dimensions on Pallet (W × D × H): approx. 1,200 × 800 × 700 mm Condition: Used Year of Manufacture: 2023 Optical Condition according to Images. System start-up and information menus have been tested. A teach pendant is not included in the scope of supply. Scope of Supply: Stäubli TS2-40 SCARA Industrial Robot Stäubli CS9-TS2-40 Controller Original Robot Connection Cable (Robot ↔ Controller) End-of-Arm Tooling Accessories according to Images Scope of supply as shown in the images. The table shown in the photos, as well as any other items not expressly mentioned, are not included in the sale. Subject to change, errors and prior sale.

Condition: excellent (used), Year of construction: 2024, Stäubli TS2-40 SCARA Industrial Robot Manufacturer: Stäubli Faverges SCA Type: TS2-40 Robot Year of Manufacture: 05/2024 Machine Type: 4-Axis SCARA Industrial Robot Controller: Stäubli CS9 For sale is a used Stäubli TS2-40 SCARA industrial robot with CS9 controller and SP2 handheld device. This compact robot system is designed for fast and precise pick-and-place, assembly, handling, and automation tasks. The system is suitable for various applications, including electronics manufacturing, machine loading, packaging technology, laboratory automation, quality assurance, and general industrial applications. Technical data: Manufacturer: Stäubli Faverges SCA Model: TS2-40 Robot type: SCARA robot Number of axes: 4 Robot year of manufacture: 05/2024 Reach: 460 mm Rated payload: 2.4 kg Maximum payload: 8.4 kg Z-axis stroke: 200 mm Repeatability XY: ±0.01 mm Repeatability Z: ±0.004 mm Gbsdpfxjzlhvue Ahdou Repeatability Rz: ±0.002° Mounting type: Floor mounting Performance data: Maximum speed axis 1: 550°/s Maximum speed axis 2: 720°/s Maximum speed axis 3: 2,500 mm/s Maximum speed axis 4: 2,500°/s Cycles per minute: up to 240 Power consumption according to VDMA 24608: approx. 0.397 kW Controller: Manufacturer: Stäubli Type: CS9-TS2-40 Controller: CS9 Controller year of manufacture: 04/2024 Controller version: Rackable Power supply: 1 × 230 V AC / 50–60 Hz Connected power: 1,700 VA Communication: Ethernet / PROFINET Device Software: VAL 3 activated Handheld device: Manufacturer: Stäubli Model: SP2 Touchscreen color display Integrated emergency stop switch Operation and programming of the robot system Power supply: 24 V DC / 0.5 A Equipment: Stäubli TS2-40 SCARA robot Stäubli CS9 robot controller Stäubli SP2 handheld device Robot and connection cables Pneumatic and electrical connections in the robot arm Ethernet interface PROFINET interface VAL-3 programming system Gripper mounting according to images RoboticsControls software / DVD Technical documentation Dimensions: Maximum reach: 460 mm Z-axis stroke: 200 mm Dimensions CS9 controller (H × W × D): approx. 270 × 445 × 365 mm Condition: Used Year of manufacture 2024. Optical condition according to images. Scope of delivery: Stäubli TS2-40 SCARA industrial robot Stäubli CS9 controller Stäubli SP2 handheld device Robot cable and connection cables RoboticsControls software / DVD Technical documentation Accessories according to images Scope of delivery as shown in the pictures. The table shown in the photos, as well as any other items not explicitly mentioned, are not part of the sale. Subject to changes, errors and prior sale.

Condition: excellent (used), Year of construction: 2024, Stäubli TS2-40 SCARA industrial robot with CS9 controller and SP2 teach pendant Manufacturer: Stäubli Model: TS2-40 Robot year of manufacture: 02/2024 Controller year of manufacture: 02/2024 Machine type: 4-axis SCARA industrial robot Controller: Stäubli CS9-TS2-40 For sale is a used Stäubli TS2-40 SCARA industrial robot including CS9-TS2-40 robot controller, SP2 teach pendant and original robot connection cable. The compact robot system was designed for fast and precise pick-and-place, assembly, handling, and automation tasks. The system is suitable for, among other things, electronics manufacturing, machine assembly, packaging technology, laboratory automation, quality assurance, and general industrial applications. Technical data: Model: TS2-40 Robot type: SCARA robot Number of axes: 4 Robot year of manufacture: 02/2024 Reach: 460 mm Rated payload: 2.4 kg Maximum payload: 8.4 kg Z-axis stroke: 200 mm Repeatability XY: ±0.01 mm Repeatability Z: ±0.004 mm Repeatability Rz: ±0.002° Mounting type: Floor mounting Performance data: Maximum speed axis 1: 550°/s Maximum speed axis 2: 720°/s Maximum speed axis 3: 2,500 mm/s Maximum speed axis 4: 2,500°/s Cycles per minute: up to 240 Energy consumption according to VDMA 24608: approx. 0.397 kW Controller: Manufacturer: Stäubli Type: CS9-TS2-40 Controller: CS9 Controller year of manufacture: 02/2024 Controller version: Rack controller Teach pendant: SP2 Power supply: 1 × 230 V AC / 50–60 Hz Connection power: 1,700 VA Communication: Ethernet / PROFINET Device Software: VAL 3 activated Handheld device: Manufacturer: Stäubli Model: SP2 Version: Teach pendant / handheld device Touchscreen color display Integrated emergency stop switch Operation and programming of the robot system Power supply: 24 V DC / 0.5 A Date of manufacture: 11/2023 Connections: Controller power supply: 1 × 230 V AC / 50–60 Hz Power consumption: 1,700 VA PROFINET Device Ethernet Digital inputs and outputs Pneumatic connections on the robot Equipment: Stäubli TS2-40 SCARA robot Stäubli CS9-TS2-40 robot controller Stäubli SP2 teach pendant Original robot connection cable Pneumatic and electrical connections in the robot arm Ethernet interface PROFINET interface VAL-3 programming system Tool mounting according to images Gbedpfx Aezlry Rehdeu Accessories according to images Dimensions: Robot dimensions (W × D × H): approx. 400 × 300 × 650 mm Controller CS9 dimensions (W × D × H): approx. 600 × 500 × 270 mm Teach pendant SP2 dimensions (W × D × H): approx. 290 × 180 × 90 mm Maximum reach: 460 mm Z-axis stroke: 200 mm Shipping data: Robot weight: approx. 38 kg Controller weight: approx. 30 kg Total weight without additional accessories: approx. 68 kg Shipping dimensions complete (W × D × H): approx. 1,200 × 800 × 700 mm Shipping on a pallet recommended Condition: Used Year of manufacture 2024 Optical condition according to images. System start and information menus were tested. Robot system including controller and SP2 teach pendant. Scope of delivery: Stäubli TS2-40 SCARA industrial robot Stäubli CS9-TS2-40 controller Stäubli SP2 teach pendant Original robot connection cable Tool mounting Accessories according to images Availability: upon agreement. Scope of delivery as shown in the images. The table shown in the photos is not part of the sale. Subject to changes, errors and prior sale.

Condition: as good as new (ex-display), Year of construction: 2017, operating hours: 800 h, functionality: fully functional, overall weight: 1,000 kg, load capacity: 130 kg, arm reach: 2,590 mm, pivoting range: 360 °, controller manufacturer: Stäubli, input voltage: 400 V, type of input current: AC, repeat accuracy: 0.05 mm, We offer for sale a powerful Stäubli TX200L industrial robot that has undergone a thorough diagnostic test by the Stäubli service team. The test results confirmed that the robot is in the current condition of a new machine, with only 400 engine hours. The service log is available in PDF format for more detailed viewing. Technical Specifications: Gbodpfxsvcf N Ds Ahdeu Nominal load capacity: 100 kg Reach between axis 1 and 6: 2594 mm Repeatability (ISO 9283): ± 0.06 mm Maximum speed at the center of gravity of the load: 12 m/s Standard for clean rooms (ISO 14644-1): 5 Protection class (wrist): IP65 (*67) Equipment and features: Control unit: Stäubli CS8 series CS8C HP Digital inputs/outputs: 16/16 Connecting cable: 10m long WMS Mode Selector and Control Panel SP1 Docking station Components and interfaces: Pneumatic system: 2 solenoid valves in 5/2-way monostable variant and 3 direct lines between base and forearm. Electrical system: 1 socket with 19 contacts (7 twisted pairs including 2 shielded, 3 power contacts). Expansion option: Ethernet 19-pin cylindrical connector with 5 twisted pairs and 3 power contacts. This robot is ideal for precision applications, including machining, thanks to its calibration and powerful features. It is fully equipped and ready for deployment in industrial environments. For more information or a tour, do not hesitate to contact us. We look forward to your cooperation.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, load capacity: 130 kg, arm reach: 2,194 mm, repeat accuracy: 0.06 mm, spindle speed (max.): 24,000 rpm, number of axes: 6, The system is completely unused. The system consists of: - 2 Stäubli robots with milling heads - 2 tool magazines with automatic tool changers - Control unit - Chip conveyor - Rotary table for pallet loading - Complete enclosure of the working area Godpfx Ajxt Nzbehdebu - Tool carrier pallets TECHNICAL DETAILS Number of axes: 6 Maximum payload: 130 kg Repeatability: ± 0.06 mm Arm Axis 1, working range: 360° Axis 2, working range: 235° Axis 3, working range: 285° Axis 1, max. speed: 160°/s Axis 2, max. speed: 160°/s Axis 3, max. speed: 160°/s Reach: 2,194 mm × 370° Wrist Axis 4, working range: 540° Axis 5, working range: 240° Axis 6, working range: 540° Axis 4, max. speed: 260°/s Axis 5, max. speed: 260°/s Axis 6, max. speed: 400°/s Spindle Type: POWERTECH PT400 Maximum speed: 24,000 rpm Tool holder: Taper ISO30 Weight: 24 kg Maximum power: 13 kW Torque: 10.4 Nm MACHINE DETAILS Operating temperature range: 0–45°C Ambient humidity: 20–80% rH Weight: 980 kg Note regarding sale: The system was intended for milling roof racks. However, a change of shareholder for the user occurred during delivery. The new shareholder did not take over the system. Further details on the equipment can be found in the attached documentation.

Condition: not inspected (used), Year of construction: 2015, operating hours: 14,500 h, functionality: unexamined, overall weight: 70 kg, load capacity: 8 kg, arm reach: 400 mm, pivoting range: 360 °, controller manufacturer: Stäubli, controller model: CS8C, teach pendant manufacturer: Stäubli, teach pendant model: SP1, control cabinet width: 445 mm, control cabinet height: 455 mm, input voltage: 230 V, input current: 16 A, repeat accuracy: 0.01 mm, For sale is an industrial SCARA robot system from the quality manufacturer Stäubli. This system is characterized by extremely high precision and speed and is in good, well-maintained condition. The package is complete and consists of the robot arm, the matching controller, and the handheld operating device. The robot was only used for a few hours in our company for a test project. Technical data & system components: Robot type: Stäubli TS40 (4-axis SCARA robot) Controller: Stäubli CS8C Gbodpfjzl Nq Tox Ahdsu Operating device (teach pendant): Stäubli SP1 Manual Control Unit Operating hours: Only 14,576 hours (very low operating hours for this system) Condition: Used Error-free system status: The controller starts up absolutely error-free. Low operating hours: With just over 14,500 operating hours, the system still has a large part of its life cycle ahead of it. Complete package: Including all necessary connection cables (as shown in the pictures). Legal note: Sale is ex-works, excluding any warranty (sold as seen, ideal for B2B / commercial / export). Shipping/collection: Shipping can be arranged, but must be paid for by the buyer. The system can be viewed by prior arrangement. If you are interested or have any questions, please send us a message or your price offer.

Condition: excellent (used), Stäubli Type: TX90XL Robot / CS8C Controller Six-axis robot with controller For sale is a Stäubli TX90XL 6-axis industrial robot, including CS8C controller and original teach pendant. The TX90XL is suitable for pick & place, assembly, machine tending, parts handling, as well as automation, testing, and training applications. The XL version offers an extended reach for flexible deployment. Programming via VAL3. Technical Data – Robot: Type: TX90XL Axes: 6 Gbodpfxezix Uie Ahdou Payload: 4 kg Reach: approx. 1,400 mm Repeatability: ±0.035 mm Wrist protection rating: IP65 / IP67 Mounting: Floor / Wall / Ceiling Weight: approx. 115 kg Technical Data – Controller: Controller: Stäubli CS8C Software: VAL3 Programming languages: VAL3, PLC IEC 61131-3 Interfaces: Ethernet, fieldbus, digital I/O, serial interfaces Power supply: 3 × 400 V, 50/60 Hz Power consumption: approx. 2000 VA Protection rating: IP20 Controller weight: approx. 50 kg Important notice: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see image) • Stäubli TX90XL robot arm • CS8C controller • Original teach pendant • Connection cables (Specifications and technical data subject to change and errors excepted!) If you have further questions, we are happy to answer them by phone.

Condition: good (used), type: RX90 control unit: RX 90-CS7 Gbsdpfx Aszdim Tjhdju liftweight: 6 kg total weight: 1120 KG supplied with: Staeubli Roboter with control unit and manual

Condition: as good as new (ex-display), Year of construction: 2017, operating hours: 400 h, functionality: fully functional, We offer for sale a powerful Stäubli TX200 industrial robot that has undergone a thorough diagnostic test by the Stäubli service team. The test results confirmed that the robot is in the current condition of a new machine, with only 400 engine hours. The service log is available in PDF format for more detailed viewing. Technical Specifications: Nominal load capacity: 100 kg Reach between axis 1 and 6: 2194 mm Repeatability (ISO 9283): ± 0.06 mm Maximum speed at the center of gravity of the load: 12 m/s Standard for clean rooms (ISO 14644-1): 5 Protection class (wrist): IP65 (*67) Equipment and features: Control unit: Stäubli CS8 series CS8C HP Digital inputs/outputs: 16/16 Connecting cable: 10m long Godpfx Ahonncalodjbu WMS Mode Selector and Control Panel SP1 Docking station Components and interfaces: Pneumatic system: 2 solenoid valves in 5/2-way monostable variant and 3 direct lines between base and forearm. Electrical system: 1 socket with 19 contacts (7 twisted pairs including 2 shielded, 3 power contacts). Expansion option: Ethernet 19-pin cylindrical connector with 5 twisted pairs and 3 power contacts. This robot is ideal for precision applications, including machining, thanks to its calibration and powerful features. It is fully equipped and ready for deployment in industrial environments.. For more information or a tour, do not hesitate to contact us. We look forward to your cooperation.

Condition: excellent (used), Stäubli Type: TX90L Robot / CS8C Controller Six-axis robot with control unit For sale is a Stäubli TX90L 6-axis industrial robot including CS8C controller and original teach pendant. The robot is suitable for pick & place, assembly, handling, machine loading, as well as automation, testing, and training applications. Programming via VAL3. Technical Data – Robot Model: TX90L Axes: 6 Payload: 5–6 kg nominal, up to 15 kg short-term Reach: approx. 1,200 mm Repeatability: ±0.035 mm Gsdpfx Ahjzix Ucjdebu Wrist protection rating: IP65 (IP67) Mounting: Floor / Wall / Ceiling Robot weight: approx. 113 kg Technical Data – Controller Controller: Stäubli CS8C Software: VAL3 s6.7.1 Programming languages: VAL3, PLC IEC 61131-3 Interfaces: Ethernet, fieldbus, digital I/O, serial interfaces Power supply: 3 × 400 V, 50/60 Hz Power consumption: approx. 2000 VA Protection rating: IP20 Controller weight: approx. 50 kg Condition: used Scope of delivery: (see photo) - Stäubli TX90L robot arm - CS8C controller - Original teach pendant - Connection cables (Subject to changes and errors in the technical specifications and information!) If you have further questions, we are happy to answer them by phone.

Condition: like new (used), operating hours: 50 h, functionality: fully functional, We have 2 units of Stäubli Scara TS60 robots with approximately 50 operating hours. Godpoy Rm Rdjfx Ahdobu

Condition: as good as new (ex-display), Year of construction: 2020, For sale is a Stäubli TP80 HE FAST picker, a 4-axis robot manufactured in December 2020. The robot was purchased for a specific project but was never used due to a project change. Therefore, it is unused stock in new condition. Gbsdpozk D T Tjfx Ahdsu The TP80 HE is a high-speed pick-and-place robot for demanding automation tasks. The HE version (Humid Environment) is specifically designed for use in humid or hygienically sensitive environments and is particularly suitable for applications in the food, pharmaceutical, and packaging industries. If you are interested, we will gladly provide you with further information, photos, or the serial number.

Condition: excellent (used), Stäubli Industrial Robot TX60 with CS8C-TX60 Controller – 6-Axis Robotic Arm For sale is a pre-owned Stäubli TX60 industrial robot, including the CS8C-TX60 control unit. The robot is ideally suited for precise handling, assembly, or inspection tasks in automation technology. Technical Data – Robotic Arm TX60 Axes: 6 Max. load capacity: 4.5 kg (up to 9 kg possible) Reach: 670 mm Repeatability: ± 0.02 mm Mounting: Floor, wall, or ceiling Protection rating: IP65 (optional IP67 at wrist) Robot weight: approx. 51.4 kg CS8C-TX60 Controller Power supply: 1X230V-50/60Hz, 1700 VA, 120 kA Compact 19" controller with VAL3 control system Gbodpfjziaayex Ahdsu Communication via Ethernet / RS232 / fieldbus (optional) Digital inputs/outputs and expansion options Protection rating: IP20 (optional IP54) Dimensions: approx. 331 × 445 × 455 mm Controller weight: 31 kg Scope of Delivery Stäubli TX60 robotic arm CS8C-TX60 controller Connection cables (robot–controller) Teach pendant, handheld programming device Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data and details!) We are happy to answer any further questions by phone.

Condition: good (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: F16/58AFD1, arm reach: 800 mm, 4 axis scara robot Stäubli TS80. Gbjdpfsnpbx Tox Ahdju This Stäubli TS80 with 200m stroke was used in assembly application. It has been maintained every year. This system includes CS8C controller, BIO with 16 DI/DO, control pendant, interconnect cable. Working radius 800 mm Stroke 200 mm Load 2 - 8 Kg 4 axes

Condition: like new (used), Year of construction: 2024, operating hours: 200 h, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, total length: 2,700 mm, I offer a new machine for large format thermoplastic solutions for 3D printing. Control: Stäubli / Cead - Profinet full controll Gsdeurvzrepfx Ahdjbu Robot: Stäubli TX200L - reach 2700 mm, load capacity 100kg Extruder: Cead E25 with a flow rate of 12kg/h Dryer VIZMATEC 100l plus automatic dosing for continuous production. G-CODE / NC code is used to generate the robot trajectory.

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, overall weight: 730 kg, load capacity: 14 kg, arm reach: 1,000 mm, repeat accuracy: 0.03 mm, TECHNICAL DETAILS Load capacity: 14 kg Maximum reach between axis 1 and axis 6: 1,000 mm Repeatability according to ISO 9283: ± 0.03 mm Rotary unit Maximum rotation angle: 350° Safe positions: 0° / ± 90° / 180° Drive unit Maximum rotation speed: 16.8 °/s Maximum travel speed: 0.6 m/s Platform positioning accuracy: ± 10 mm / 1° Drive type: Differential drive Navigation: based on laser scanner data Average surface pressure on the ground: max. 10 N/mm² MACHINE DETAILS Wrist protection class: IP67 Arm protection class: IP65 Total system protection class: IP20 Battery capacity: 5.8–8.7 kWh Compressed air tank: 0.75 l Compressed air pressure: 7 bar Power supply: 1 × 230 V / 16 A Gbsdsz Im S Ropfx Ahdju Dimensions & Weight Dimensions without robot arm (W x H x D): 890 × 1,120 × 1,000 mm Weight: 730 kg Interfaces: WLAN, LAN, Fieldbus Multi-coupling: Compressed air, power supply, 2 × Cat5e, 26 × 1 mm² contacts EQUIPMENT Storage station for 4 tools Tool changing system MPS032 3 laser scanners with 360° monitoring range Height of the personnel-safe scanning plane: 150 mm 4 LED units Storage space for up to 16 audio files

Condition: like new (used), Year of construction: 2017, operating hours: 4,500 h, functionality: fully functional, machine/vehicle number: F17/5EWVB1, overall weight: 350 kg, load capacity: 30 kg, arm reach: 1,700 mm, I offer the Stäubli RX160 robot, the option to add a uniVal Drive The robot is in almost new condition, used only 4500 hours motor see. photo. Gbodpfx Asr Dvd Ishdsu Maximum load 30kg Nominal load 20Kg Reach (between axis 1 and 6) 1710 mm Number of degrees of freedom 6 Repeatability - ISO 9283 ±0.05 mm Stäubli series controller CS8C Weight 248 Kg

Condition: used, Stäubli NH1-130-2.6 robot, manufactured in 2007. This robot comes from a company that has ceased operations. Gedpfx Ahezyafqsdobu

Condition: good (used), Year of construction: 2006, Stäubli Type: RS 60 Gbedpfx Aezdimtohdju Technical Details Payload: 2 kg Axes: 4 Description Working range: 600 mm; Inner radius: 166 mm; Repeatability: +/- 0.01; W x H x D: 810 x 976 x 710 mm Weight: 70 kg Condition: used Scope of supply: Robot arm, connecting cable, computer, and control unit. (Subject to changes and errors in technical data; information provided is without warranty!) We will gladly answer any further questions you may have over the phone.

Condition: ready for operation (used), Year of construction: 2017, Two Stäubli robots including controller and stand are available. 1) 2x Stäubli RX160L robots, year of manufacture: 2017, axes: 6, payload nominal/maximum: 14kg/28kg, reach: 2010mm, repeat accuracy: +/-0.05mm, max. speed: 12.3m/s, weight: approx. 250kg, operating hours: approx. 52000h. 2) 2x Stäubli CS8C-RX160 controllers, year of manufacture: 2017. 3) 2x robot stands for Stäubli RX160L. Documentation available. On-site inspection is possible. Gjdewt Tltepfx Ahdobu

Condition: good (used), Year of construction: 2017, operating hours: 50,000 h, functionality: fully functional, arm reach: 600 mm, Stäubli TS60 SCARA Robot – Wall Mount, incl. Base Frame, CS8C Controller, PROFINET Description: Used Stäubli TS60 SCARA robot in wall-mount configuration, including base frame/mounting support. Fully serviced – complete oil change and cleaning carried out. Supplied with Stäubli CS8C controller and PROFINET card. Ready for operation. Technical data: Model: Stäubli TS60 (4-axis SCARA) Mounting: wall mount, incl. base frame Controller: Stäubli CS8C Fieldbus: PROFINET card Payload: 2–8 kg Z-stroke: 200 mm Operating hours: approx. 50,000 h Connection cable: 5 m Godpfjzcwx Usx Ahdjbu Condition: serviced (oil change + cleaning done)

Condition: new, Year of construction: 2018, operating hours: 9,000 h, functionality: fully functional, overall weight: 110 kg, load capacity: 14 kg, arm reach: 1,000 mm, pivoting range: 360 °, repeat accuracy: 0.03 mm, Equipment: documentation/manual, For Sale: Stäubli TX90 Industrial Robot – High Precision, Lightly Used Model: Stäubli TX90 Reach: 1000 mm Gedpoxuwghofx Ahdobu Repeatability: ±0.03 mm Operating hours: only 9000 mth (powered on, not in continuous operation) The robot is in excellent technical condition, fully functional, and ready for immediate use. Perfect for applications such as handling, assembly, gluing, dispensing, machine tending, or light machining. ➡️ Key advantages of the TX90: Compact design with optimal 1000 mm reach High dynamics and accuracy (±0.03 mm) Fully enclosed structure (IP65 / IP67 depending on configuration) – suitable even for demanding environments Compatible with CS8 control systems

Condition: ready for operation (used), Year of construction: 2016, operating hours: 344 h, This STAUBLI TX60 robot arm was manufactured in 2016. It is in very good condition, almost like new, with only 344 operating hours. It includes a controller and a handheld control unit. Consider the opportunity to buy this STAUBLI TX60 robot arm. Contact us for more information. Gjdpsx D Sfdefx Ahdsbu Machine Benefits Technical machine benefits: • Controller and handheld control unit are included Qualitative machine benefits: • Very good condition - like new

Condition: excellent (used), Year of construction: 2015, machine/vehicle number: F15/51DEA1/A/01, overall weight: 1,150 kg, load capacity: 6 kg, arm reach: 1,000 mm, controller manufacturer: Toolcraft, controller model: CSC8C, For sale is an STÄUBLI TX90 industrial robot in a Toolcraft polishing cell, manufactured in 2015. The item is in very good condition. Main data & connections of the complete system Manufacturer of complete system: MBFZ-toolcraft GmbH Model designation: Polishing cell 3 Machine number: TC 2015/03 Year of manufacture: 2015 Total weight: 1,150 kg Mains voltage / frequency: 400 V / 50 Hz Connection power: 13 kW Required fuse rating: 30 A Compressed air connection: 6 bar (constant) Conformity: CE marking 2. Data of the integrated Stäubli robot Gbodpjzk Hbgefx Ahdsu Model / Type: TX90 (6-axis articulated arm robot) Machine identification number: F15/51DEA1/A/01 Robot manufacturing date: 07-2015 Weight of kinematic system: 111 kg (245 lbs) 3. Extended performance & kinematic data (manufacturer's specification) Number of controlled axes: 6 axes Maximum reach: 1,000 mm (between axis 1 and axis 6) Repeatability (ISO 9283): ± 0.03 mm Protection class of the robot arm: IP65 Axis travel ranges (range of motion) Axis 1 (A1 - rotation): ±180° Axis 2 (A2 - arm): +147.5° to -60° Axis 3 (A3 - forearm): +145° to -145° Axis 4 (A4 - wrist rotation): ±270° Axis 5 (A5 - wrist swivel): +120° to -105° Axis 6 (A6 - flange rotation): ±270° 2. Maximum axis speeds (dynamics) Axis 1: 400°/s Axis 2: 400°/s Axis 3: 430°/s Axis 4: 540°/s Axis 5: 475°/s Axis 6: 760°/s 3. Moments of inertia & forces Maximum moment of inertia Axis 5: 0.48 kg⋅m² Maximum moment of inertia Axis 6: 0.1 kg⋅m² Upon request, transport and loading can be organized throughout Europe for an additional cost. Prices plus VAT. Inspection possible by appointment. Contact us, our team will be happy to assist you. Trade-in or exchange possible! Machine buying & selling PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, ETC. Do you need a high-quality, yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website.