Used Kramer Allrad 180 for sale (84)

Condition: good (used), Year of construction: 1984, machine/vehicle number: 43910, Offer 25177 Technical specifications: - Max. working width 1030 mm - Max. material thickness at 40 kg strength per mm²: 1.50 mm - Roller diameter 65 mm Nkodpfxowmngxe Aaxjt - Swiveling top roller - Asymmetrical roller arrangement - Rear roller tiltable for conical rounding - Front roller adjustable with lever and eccentric - Bottom roller + rear roller with wire insert groove - Electric foot switch for left-right rotation - Drive 400 V - Space required approx. W 1500 x H 1250 x D 500 mm - Weight approx. 300 kg

Year of construction: 1985, condition: good (used), machine/vehicle number: xxxx, Technical data: - Bending operation and rolling operation by hand, - max. working width 1020 mm - max. material thickness St 40 1,25 mm - bending angle adjustment via end stop 10 - 180 ° - max. stroke upper beam approx. 85 mm - max. adjustability bending beam 20 mm - shaft diameter 55 mm - upper shaft swivels out - rear shaft parallel + inclined adjustable - space requirement approx. W 1500 x H 1400 x D 750 mm Nsdpfjf S Tg Tsx Aaxskt - weight approx. 400 kg

Condition: used, power: 35 kW (47.59 HP), Year of construction: 2023, Speed: 20 / _____ / Technical data: / Bucket capacity (standard bucket) 0.65 / m³ / Operating weight 3,200 - 4,300 kg / Tipping load (standard bucket) 2,340 kg / Tipping load (pallet fork) 2,187 kg / Payload (S=1.25) 1,750 kg / Lifting capacity (m Nedpjqrqc Njfx Aaxekt

Condition: used, power: 110 kW (149.56 HP), Year of construction: 2018, operating hours: 4,800 h,

Condition: used, power: 18 kW (24.47 HP), Year of construction: 2023, Tires (v): 400/50-15 / _____ / KR Telescopic handler KT144 (T01-02) / Serial number Telematics module / Customs tariff number : 84295 / I99 / / Sales designation KT144 / Control lever Kramer / Function / Paint type Kramer / Agricultural Nkedpfxeqrqdie Aaxst

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1991, degree of automation: semi-automatic, actuation type: electric, working width: 3,000 mm, bending angle (max.): 165 °, sheet thickness steel (max.): 2 mm, back gauge: 1,150 mm, overall weight: 3,900 kg, total length: 4,300 mm, total width: 2,400 mm, total height: 1,700 mm, type of input current: three-phase, stroke length: 280 mm, Equipment: emergency stop, foot remote control, We are selling our folding bending machine Kramer AMaut III 3000/2 due to a new purchase. The machine has a motorized back gauge from 10 mm to 1150 mm. The top beam can be equipped with different bending bars, including a 135° gooseneck bar with 150 mm free edge, a flat 135° bar, and a 165° bar. Further details can be requested. The bending machine is available immediately. The bending machine can be tested on site with us. The machine is sold excluding any warranty or guarantee. A return is not possible. 'Sold as seen' applies. Transport must be organized by the buyer. Njdewr D Ivspfx Aaxskt

Condition: refurbished (used), Krämer+Grebe WW160 The machine was completely overhauled. The machine was replaced all ball bearings as well as seals. From the inside the machine was completely painted and polished from the outside. Feeding (200L) cutter car. A visit is of course possible by appointment. Nedpfxspuf Iue Aaxskt Errors and prior sale reserved. All information is non-binding. The accuracy and correctness of the information and prices are not guaranteed. A warranty and / or liability is excluded. Until full payment, the machine remains our property.

Condition: used, empty load weight: 4,940 kg, maximum load weight: 13,060 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 02/1994, loading space volume: 10 m³, suspension: steel, tire size: 385/65R22.5, color: white, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 2-axle, SAF axles, turntable, leaf suspension, ABS (anti-lock braking system), U-protection, side aluminum driving protection, rotating beacon, rear outlet Superstructure: Müller tank superstructure type WM A 100 with 10,000 l tank capacity for transporting faeces 2x 9 t SAF axles, drum brakes! ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Njdpfovhihbjx Aaxokt - .

Condition: used, mileage: 1,001 km, power: 15 kW (20.39 HP), gearing type: other, fuel type: diesel, color: grey, empty load weight: 1,600 kg, number of seats: 2, first registration: 07/1938, Year of construction: 1938, driver cabin: other, Equipment: trailer coupling, Vehicle location: Bovenden, Manufacturer/Brand: Kramer Model series: K-series Model: K 18 (K 18 M) Construction: Carrying frame Njdpevhlklofx Aaxekt Production period: 1936?1950 Number of units: 6768 Dimensions Dead weight: 1650 kg Length: 2820 mm Width: 1450 mm Height: 1440 mm Wheelbase: 1800 mm Ground clearance: 250 mm Track width: 1250 mm front: 1250 mm Rear: 1250 mm Turning radius without steering brake: 2500 mm Standard tires: front: 5.50 x 16 rear: 8.00 x 20 Engine Rated power: 11.7-14.6 kW, 16?20 hp Rated speed: 1500 rpm Number of cylinders: 1 Displacement: 1639 cm³ Fuel: Diesel Cooling system: Evaporative cooling Drive system Drive type: Rear-wheel drive Gearbox: 4/1 gearbox Maximum speed: 15 km/h ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: refurbished (used), functionality: fully functional, Year of construction: 1990, degree of automation: semi-automatic, We are offering an overhauled folding machine by Kramer. Bending length: 2500 mm Material thickness: 2.5 mm (steel) Weight: approx. 4000 kg Nsdpfxsxcpd Us Aaxokt The machine has been fitted with new spindle nuts and a new bending rail made from tempered 1.2312 steel. The machine is powered and can be tested. Please contact us to arrange a viewing.

Condition: used, Year of construction: 1988, machine/vehicle number: 46922, sheet width:2.050 mm plate thickness:1,5 mm distance between columns:2100 mm column arm:100 mm table width:300 mm Nedpfxecxxras Aaxokt number of strokes - loaded:50 total power requirement:4,0 KW weight of the machine ca.:1,85 t

Condition: used, Grinder with mixer Manufacturer: Kramer Grebe Wetter Model: Grinder 130mm Made of stainless steel Nodpfew Idzgjx Aaxokt Lowest noise level Easy cleaning Hopper volume: 245 liters Voltage: 400V 50Hz Weight: 850kg

Condition: used, Throughput depending on material type, speed, and cutting set Capacity: up to 4.000 kg/h Main motor power: 10KW / 15 KW Nodpfx Asu H Af Ujaxskt Power supply: 380 V, 50 Hz Dimensions of the machine in cm: Width: 110 Lenght: 90 Height: 115

Condition: like new (used), Throughput depending on material type, speed, and cutting set Nodpfed S U E Rex Aaxjkt Capacity: up to 4.000 kg/h Main motor power: 10KW / 15 KW Power supply: 380 V, 50 Hz Dimensions of the machine in cm: Width: 110 Lenght: 90 Height: 115 Delivery time: 10 working days after advanced payment

Condition: like new (used), Completely made of special stainless steel Specialized for grinding cheese and yellow cheese BLOCKS Hole plate diameter: 200 mm Nkedpfopgnftjx Aaxet Hopper capacity: approx. 400 liters Synchronized speed for shatter and feed screw Working worm Machine dimensions in сm: Width: 215,0 Depth: 150,0 Height: 196,0 Main Motor Power: 45 kW Installed Power approx. 65 kW Voltage: 380 V, 50 Hz

Condition: good (used), overall dimensions 2800x2300x1700 mm; bowl 200 ltr; 3 knives speeds 1000/1500/3000 rpm; 2 bowl speeds; 2 mixing speeds; hydraulic loader; hydraulic unloader; Njdpfx Aohv Ruysaxekt 6 knives; power supply 400 V, 50 Hz; power: main motor 26/48/85 kW, bowl motor 2,6/5,1 kW, mixing motor 3,2/4,1 kW; unloader motor 1,1 kW, hydraulic system 2,2 kW, vacuum pump Busch 250 m3, 5,5 kW.

Condition: used, overall dimensions 2900x2500x1550/2100 mm; bowl 200 ltr; power supply 400 V,50 Hz; Nedpfx Ajv Hppvjaxekt 2 knife speeds 1500/3000 rpm, 48/66 kW; 2 bowl speeds, 2.2/2.7 kW; 2 mixing speeds, 2.2/2.7 kW; hydraulics 3.1 kW; loader; unloader 0.37 kW.

Condition: good (used), The KRÄMER+GREBE TMG 1500/200 mixing grinder is a professional stainless steel machine designed for industrial meat processing. It is ideal for grinding and mixing both fresh and partially frozen meat. Mixing Grinder CFS – KRÄMER+GREBE TMG 1500/200 Manufacturer: CFS – KRÄMER+GREBE Model: TMG 1500/200 Year of Manufacture: 1998 Machine Number: 371/0109 CE Certification: Yes Machine Features: Mixing tank capacity: approx. 1500 liters Processing capacity: Fresh meat: approx. 800-900 kg Partially frozen meat: approx. 700-750 kg Meat grinder throat diameter: 200 mm Main motor power for grinder: 45 kW (1 speed) Screw speed: 160/320 min⁻¹ Main motor power for mixer: 7.5/11 kW (2 speeds) Mixing paddle speed: 16/32 min⁻¹ Additional Equipment: Pneumatic sorting device Pneumatic discharge flap for mixer Stainless steel base Integrated loading for 200-liter wagons Application: This mixing grinder is ideal for meat processing plants that require efficient and reliable machinery for grinding and mixing large quantities of meat. Machine Benefits: High performance when processing both fresh and partially frozen meat. Nsdpfsumlibox Aaxekt Durable stainless steel construction ensures longevity and easy maintenance. Adjustable mixing and grinding speeds allow customization of settings to meet various production needs. Integrated pneumatic systems provide smooth and efficient operation.