Used Gesan Dp 200 for sale (17,200)

Condition: good (used), Year of construction: 2015, passenger car, car, automobile -Transmission: Automatic transmission -Special feature: 3 foot pedals - Layout: left accelerator pedal, center brake pedal, right accelerator pedal, electronically switchable -Explanation: enables acceleration with the left leg if the function of the right leg is limited -Power: 100 kW / 136 hp -Fuel type: Diesel -Color: black -Transmission: DCT automatic transmission Dcodpfx Afjwh Rz Uj Dsc -Engine displacement: 2143 cc -First registration 13.04.2016 -Number of holders: 3 -Mileage: 154,729 km -HU/AU valid until: will be renewed upon sale -Tires: Winter and summer tires on alloy rims -Equipment list: see pictures (with codes) Auxiliary heater, blind spot monitoring, parking assist, Garmin MAP PILOT, off-road package, cruise control, suspension for increased ground clearance, air conditioning, automatic high beams, heated seats, automatic tailgate, remote control for auxiliary heater...

Condition: used, Year of construction: 2016, operating hours: 1,921 h, axle configuration: 4x4, fuel type: diesel, Equipment: all wheel drive, Drive: Wheel Empty weight: 10.000 kg Mast: articulated arm Lifting capacity: 230 kg Working height: 2.000 cm Rental currency: EUR Dodpfx Aoyhvd Hjf Djcc Please contact KEY-TEC Sales for more information

Condition: used, all stainless steel twin shaft paddle mixer intermeshing mixer useful content : 2.000 L dimensions (l x w x h) : ± 4.100 x 1.500 x 2.700 mm 1 front discharge guard Djdpfxsyba Tlo Af Djcc 18 kW

Condition: ready for operation (used), Year of construction: 1995, Schuko spray booth wall with supply air unit + supply air ceiling Offered at a special price, but must be dismantled by the buyer Technical data: see photos Location: ex-site Saarland Dcsdpfxsxvivqj Af Doc

Year of construction: 1970, condition: used, Center lathe Reiden R200 Center height 200mm center width 1000mm Dsdohtaauspfx Af Dscc 380V speed 16 - 1580 rpm

Condition: used, machine/vehicle number: 007307, Max. working width: 3200 mm Max. working thickness: 60 mm Dsdpfxeuaq D Aj Af Decc

Condition: used, machine/vehicle number: 005289, X axis working area: 7400 mm Y axis working area: 1550 mm Working Table: Flat table Main Electrospindle power: 11 KW Number of controlled axes: 4 axes Total number of drilling spindles: 10 Total number of tool changer positions: 14 Dcsdpfx Afowcyacs Djc

Condition: used, machine/vehicle number: 007601, X axis working area: 4320 mm Y axis working area: 2245 mm Working Table: Flat table Dcedpfxou N Skfs Af Djc Main Electrospindle power: 9 KW Number of controlled axes: 3 axes Total number of drilling spindles: 16 Total number of tool changer positions: 8

Condition: new, Year of construction: 2025, JMC 200 B Immediat delivery from our possible. Fully serviced. New condition McIntyre’s wide experience in hydraulic Djdpfx Afjin N Tdj Dscc equipment manufacture has enabled us to build an 8” shear with a staggering cutting force. Although equipped with only an 8” blade, the high shear force and wide tip to tip opening on the McIntyre 200B means that it can deal efficiently with a whole range of non- ferrous cleaning and sizing operations - in particular larger diameter electric cables and valves. In most cases - if your metal will fit into the jaw of the 200B, then this machine will cut it.

Condition: excellent (used), CATALOG NUMBER 7881 Technical data: - Cutting height: 30-200mm - Max saw blade diameter: 350mm - Spindle diameter: 70mm - Max cutting width of wood: 500mm - Working width of arbor with saws: 400mm - Minimum length of cut wood: 1000mm *Top: Dcedpfeyfhppex Af Doc - Anti-kickback devices - 4 toothed feed rollers – pneumatically pressed *Bottom: - Sliding roller - Anti-kickback devices - Toothed feed shaft, 2 pcs - Arbors with saws - Toothed feed shafts, 2 pcs - Infinitely adjustable feed speed via frequency inverter - Feed motor: 3kW - Main motors: 2x55kW - Extraction outlet diameter: 250mm - Machine dimensions (L/W/H): 2150x1880x1800mm - Machine weight: approx. 3500kg ADVANTAGES – Made in Poland – Double-arbor multi-blade saw, 2x55kW – Original DTR + CE documentation – Used multi-blade saw in very good condition Net price: 88,900 PLN Net price: 21,200 EUR (based on the rate of 4.2 EUR) (Prices may change with significant rate fluctuations)

Condition: good (used), Display, display module, display panel, text display -Manufacturer: Siemens, Text display Simatic S7 TD 200 -Type: 6ES7272-0AA00-0YA0 6ES7 272-0AA00-0YA0 -Dimensions: 150/70/H30 mm Dcodpfx Aeycf U Ref Djc -Weight: 0.3 kg

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, Used upsetting press with inductive heating, for solid material diameter: 12 mm - 60 mm Manufacturer: GFU Dcsdpsycl Idefx Af Dsc Model: HP 200 Year of manufacture: 2009 Serial no.: 09/1025 with extensive accessories

Condition: good (used), functionality: fully functional, Year of construction: 2006, Used 4 meter CNC press brake from Bystronic Djdoya Hpdepfx Af Dscc Model: PR 200 Capacity: 4100 x 200 tons Cybelec ModEva12 CNC control Controlled axes: Y1, Y2, X, R, Z1, and Z2 Year of manufacture: 2006 Extra long stroke: 415 mm Hydraulic RFA upper clamping Hydraulic WILA NS lower clamping Hydraulic CNC crowning

Condition: used, tank capacity: 200 l, GENERAL Equipment: disc valve Design type: horizontal Notes: 4-legged chassis made from V2A; internal dimensions at the top approx. 700 x 1105 mm; internal height approx. 360 mm; 1 tank with 2 dents; hand levers for the disc valves are missing Overall width: 750 mm Overall height: 1,020 mm Overall length: 1,250 mm Top: open Location: Bremen Volume: 200 liters Product-contact material: V4A 1.4571 (AISI316) Condition: used TANK Mounting: mobile frame Number of feet: 4 pcs EQUIPMENT Outlet: 35 mm Note: slight residues/adherences MATERIAL SPECIFICATION Dcodpfsycli Ujx Af Djc Feet material: stainless steel

Condition: used, tank capacity: 200 l, GENERAL INFORMATION Remarks: Internal dimensions approx. 1,000 x 1,000 mm; internal height approx. 190 mm (slight slope towards outlet); small dents in the bottom (see photos) Total width: 1,400 mm Total height: 250 mm Dsdpfx Ajyck I Ajf Docc Total length: 1,380 mm Top: open Location: Bremen Volume: 200 litres Product contact material: V2A 1.4301 (AISI304) Condition: used EQUIPMENT Outlet: DN50 DIN 11851

Year of construction: 2010, condition: used, Universal machine for eroding and grinding various PCD tools up to 250 mm in diameter and 200 mm in length in production and service. Accessories: Total enclosure, Extraction N183, Cooling and cleaning device for dielectric, Dcsdpfx Ajycckcjf Doc Automatic fire extinguishing device, Loader for erosion disc sets with CNC-controlled swivel arm for loading and unloading 1 set of gripper fingers for workpiece automation HSK 63/SK40 Workpiece carrier adaptation A-axis from SK 50 to HSK 63 A, 1 exchange element with flange, 1 x flushing kit, Test bar X axis travel: 440 mm B-axis: +/- 15° Y axis travel: 876 mm Z-axis travel: 420 mm E-axis swivel range: 210° A-axis rotation range: 360° workpiece carrier base: SK 50 workpiece length max.: 200 mm Workpiece diameter max.: 250 mm workpiece weight: 15 kg Connected load approx.: 6.7 kW 400V/50 Hz Weight approx: 7000 kg Dimensions W x D x H =: 1987 x 3141 x 2275 mm colour: RAL 7047 Telegray 4/ Color RAL 7045 Telegray 1

Condition: used, tank capacity: 200 l, GENERAL Design: upright Remarks: Drum lid made of 1.4541 (V2A); lid partially with connection approx. 6 mm diameter (see photos); drums partly with minor dents Internal diameter: 560 mm Total height: 900 mm Dcsdpfx Ajyci S Tof Dsc Top head: removable / hinged top head Location: Bremen Volume: 200 liters Product-contact material: V4A 1.4401/04 (AISI316) Condition: used Cylindrical height: 860 mm Previous use: pharmaceutical EQUIPMENT Outlet: not available MATERIAL PROPERTIES Top head material: AISI304 (V2A) 1.4541

Condition: used, tank capacity: 200 l, GENERAL Design: rectangular Overall width: 835 mm Overall height: 410 mm Dedpfeyci Hdex Af Dscc Overall length: 1,235 mm Top: open Other: Material: HD-PE Manufacturer: asecos General Building Authority Approval Approval No.: Z-40.22-252 Load capacity: 500 kg with evenly distributed load Internal height: 280 mm Weight: 26 kg/each Type plate missing for 6 units Tubs can be nested when empty Individual tubs may have minor damage on the corners (see photos) Location: Bremen Type plate: Volume: 200 liters Product-contact material: plastic Condition: used FEATURES Outlet: not available

Condition: used, tank capacity: 200 l, GENERAL Equipment: Level indicator (without guarantee) Design: upright Top head: bolted cover Dodpfeycizhsx Af Docc Location: Bremen (available from mid-January 2026) Volume: 200 liters Product-contacting material: V2A 1.4301 (AISI304) Condition: used VESSEL Stand type: mobile frame EQUIPMENT Manway / Dome: handhole Outlet: clamp connection

Condition: used, Year of construction: 2019, functionality: fully functional, FLOW Waterjet Mach 200 4020 Construction Year 2019 - fully functional Axis Movement: X-Axis: 4.000 mm Y-Axis: 2.000 mm Z-Axis: 200 mm Dsdpfxjyfhnrs Af Dscc Ausstattung: - 1x Cutting Head 5-Axis - Flow CAD/CAM - Abrasive tank - manual pump for tank cleaning - High pressure Flow Hyplex

Condition: excellent (used), Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Mr.: Simon Blank Included in delivery: 01x CS Sigma profile, used Material color: sendzimir galvanized profile length: approx. 1.750 mm CS Sigma: approx. 200 x 65 x 18 mm material thickness: approx. 1,50 mm weight / pcs.: approx. 7,950 Kg Remark: Dcsdpohvz D Hjfx Af Doc The pictured angles are not part of the offer. General information about the item: This item is offered for pickup only. Any additional transport or shipping of this item or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us. Our services at a glance: (prices on request) Assembly, erection our general assembly conditions are to be observed Rack inspection Rack inspection according to DIN EN 15635 executed according to the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet (without unloading)

Condition: new, Technical data for the base plate: Shelving system: Nedcon Type: NS Year of manufacture: 2024 -new IMMEDIATELY AVAILABLE Included in delivery: 01x footplate, new Material color: RAL 5019 Capri blue Material thickness: approx. 3.50 mm Dodporfdalefx Af Djcc Suitable for frame profile width: 100 mm Total width: approx. 200 mm Total depth: approx. 93 mm Total height: approx. 43 mm Distance between drill holes: approx. 145 mm Drill hole Ø: approx. 15 mm Weight/piece: approx. 0.663 kg General information about the item: This item is only offered for collection. Any other desired transportation or shipment of this item is associated with additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: as good as new (ex-display), The scope of delivery includes: 01x shelf connector, second choice (new) Manufacturer: Kimer for shelf spacing: approx. 200 mm Material color: sendzimir galvanized Total length: approx. 280 mm Profile: U 78 x 30 mm Weight: 0.47 kg | pcs. Remark: This is a II. Wahl product, new and unused. II. Choice means that there may be dust deposits, minimal scratches or soiling may be present. Your contact person in our company: Dedpfx Aernrdgjf Dscc Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: excellent (used), Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Mr.: Simon Blank Dcjdpfx Afehwduxo Doc Included in delivery: 01x CS Sigma profile, used material color: sendzimir galvanized profile length: approx. 1.650 mm CS Sigma: approx. 200 x 65 x 18 mm material thickness: approx. 1,50 mm weight / pcs.: approx. 7,500 Kg Remark: The pictured angles are not part of the offer. General information about the item: This item is offered for pickup only. Any additional transport or shipping of this item or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us. Our services at a glance: (prices on request) Assembly, erection our general assembly conditions are to be observed Rack inspection Rack inspection according to DIN EN 15635 executed according to the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet (without unloading)

Condition: good (used), Technical specifications for the shelf connector: Shelf system: Polypal Included in delivery: 1x shelf connector, used for shelf spacing: 200 mm Total length: approx. 260 mm U-profile dimensions: approx. 50 x 15 mm Material color: Sendzimir galvanized Drill hole diameter: 11 mm Weight: 0.250 kg | each includes: 2x screws M10 x 35 mm 2x nuts M10 2x washers M20 Dsdewhkbzepfx Af Djcc Your contact person in our company: Mr. Andre Evening Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item is subject to additional costs, which can be requested separately depending on the delivery location or scope of delivery.