Used Atlas-Copco Qas 24 for sale (25,294)

Condition: used, Year of construction: 2004, Technical details: feed pressure: 9,75 bar liter capacity: 10,1 l total power requirement: 5,5 kW volume capacity: 10,1 m³/min. Number of working hours: 26071 h revolutions per minute of the motor:: 3000 U/min. Chodpfju Szlusx Abced protection class: CE 0038 machine weight approx.: 310 kg dimensions L x W x H: 1,2 x 0,6 x 1,0 m Condensate separator installed. Restriction: Overload valve does not switch off automatically. For sale as is. *

Condition: like new (used), functionality: fully functional, power: 5.16 kW (7.02 HP), overall weight: 2,000 kg, Year of construction: 2014, operating hours: 688 h, total length: 3,000 mm, total width: 750 mm, total height: 1,400 mm, operating pressure: 32 bar, machine/vehicle number: LT7-30UV, Equipment: documentation/manual, refrigerant dryer, type plate available, Piston compressor Cjdpsw N Nftefx Abcohd

Condition: good (used), functionality: fully functional, power: 26.5 kW (36.03 HP), fuel type: diesel, Year of construction: 2015, operating hours: 1,375 h, Atlas Copco XAS 67 kd year: 2015 running hours: 1375 3.6 m³/min Cedpfx Asw S Ia Uebcjhd max pressure: 7 bar weight: 740 kg Great running compressor ready for use.

Condition: used, Used 2 MW wood biomass power plant built in 2009 and running until February 2023. Plant is made up of a steam boiler that uses forest waste as fuel and a condensing steam turbine generator, electrical room, control room. Main equipment includes: - Biochamm BCV-11.0000 CA biomass boiler built in 2008 with approximately 23,665 hours of use. - Boiler feed system made in 2008 with approximately 22,549 hours of use. - Atlas Copco compressors made in 2008. - Water treatment plant made in 2008. - Hamworthy condenser made in 2008 with 22,539 hours of use. - Siemens SST-110 (TWIN AFA46 GT6) steam turbine made in 2008, with 22,539 hours of use and 563 starts. - Leroy Somer L57 54 m7/41 alternator made in 2008 with 22,539 hours of use. - EWK cooling towers made in 2008 with approximately 23,102 hours of use. - Fivemasa HVAC made in 2008. Available for relocation or in-situ with land and buildings. Csdjw U A Hhspfx Abcehd

Condition: used, functionality: unexamined, machine/vehicle number: PF4002-C-HW, Used Atlas Copco Power focus SL PF4002-C-HW "Nutrunner Controller" (power screwgun) Manufacturer: Atlas Copco Tools AB Model: PF4002-C-HW Csdpfsxl A Huox Abcehd Voltage: 90-120 / 180-240 VAC (50-60Hz) With ETD SL21-01-I06-PS / ETD SL21-04-I06-PS Sold as a set consisting of controller and screwgun

Condition: excellent (used), Year of construction: 2017, overall weight: 403 kg, volume flow: 1.55 m³/h, operating pressure: 13 bar, input voltage: 400 V, ATLAS COPCO GA 11 FF screw compressor With refrigerated dryer Codpfx Aboxn Atgjcohd On a 500 l pressure vessel 11 kW motor Capacity 1.55 m³/min Pressure 13 bar Year of manufacture: 2017 Compressor serviced, filters and oil replaced.

Condition: excellent (used), Year of construction: 2012, operating hours: 14,785 h, functionality: fully functional, Second hand oil-free compressor Atlas Copco ZT250FF. 250 kW, 10 bar with 42 m³/min. Integrated drum dryer. Chjdpfx Abexdwr Ajcsd

Condition: excellent (used), System is from 2022. Ideally the complete system is for sale do nitrogen generator with two 500 liter tanks plus filters. Codpfjvt Ec Eox Abcjhd

Year of construction: 2008, condition: ready for operation (used), Operating pressure: 13bar, volume flow: 17.07m³/min, motor power: 90kW, motor speed: 3480rpm, weight: approx. 1750kg. The frequency converter of the machine is defective. An on-site inspection is possible. Chsdpfoxmkc Tsx Abcsd

Condition: excellent (used), Year of construction: 2016, General information Field of application: Construction Reference number: 4 Weights Empty weight: 1.300 kg Functional CE mark: yes Maintenance, history and condition Number of owners: 1 Technical condition: very good Visual appearance: very good Other information Fits to following machines: 17-29ton Reconditioned: Yes Delivery terms: EXW Transport dimensions (LxWxH): 2x0,7x0,6 Chjdovpq Thspfx Abcjd Working pressure: 160-180 bar Required hydraulic flow: 155 l/min Strike count: 330-680 Latest inspection: 2025-01-02 Production country: DE Additional information Please contact Ö. Inalkac for more information We offer Atlas Copco/ Epiroc MB1500 from 2016 with Conti Lube, all bushes, seal kit, 2 guide plate small, 2 guide plate, 2 shock absorber, guide, 2 tool pin, 2 stop pin, chisel, decals, hoses and new painted. MB1600 MB1650 MB1700 MB1200

Condition: used, Empty weight: 1.000 kg Csdpfx Aexh Hb Iobcohd Type number: 1202878483 DEUTZ F2L DEUTZ F2L 43 L/S 8 BAR DEUTZ F2L OEM : 1202878483 Article nr.: W309524004-veiling Used Compressor Atlas Copco 8 BAR

Condition: used, fuel type: gasoline, empty load weight: 85 kg, Year of construction: 2018, Engine: Honda GX160. Petrol. Dimensions: 50 x 40 cm. Impact force: 1500 kg. With wheel set. Price: €500, excl. VAT. Codsxg Dpyjpfx Abcehd

Condition: excellent (used), functionality: fully functional, We currently have over 15 Atlas Copco GA90 units in stock in various configurations. Frequency-controlled. With integrated dryer. Cedjxctxiopfx Abcohd

Condition: new, feed pressure 11 bar intake capacity 480 cm³ Chjdpjvkizgsfx Abced volume capacity 360 Receiver capacity 270 l / bar Number of cylinders 1 Stk. motor 400Volt / 3,0KW V / KW turning speeds 892 U/min weight of the machine ca. 200 kg. range L-W-H 1,6 x 0,7 x 1,2 mm

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, ATLAS COPCO GA50VSD screw compressor, machine after service with frequency inverter Technical specifications: Output: 9.18 m3/min; Motor power: 50 kW; Maximum pressure: 13 bar; Year: 2001 Chodpfsxlpzxox Abcod Operating hours: 18,531h Price: 19,500 net / 23,985 gross Compressor is fully functional, ready for operation, warranty included Service provided. Video link below.

Condition: excellent (used), functionality: fully functional, total length: 1,950 mm, total width: 1,500 mm, total height: 1,500 mm, Selling here a heat recovery system for compressed air systems. Original Atlas Copco. WRG system for compressor. Csdpep N H Hujfx Abcehd Dismantled due to insufficient compressor performance. Was hardly used :( Atlas Copco ER90 energy recovery unit - details attached as PDF. For water-cooled oil-free ZR compressor Turn your water-cooled, oil-free ZR compressor into an energy source for hot water with ER, our energy recovery unit. Power: 90 kw Special equipment: Reserve water pump - redundancy 2nd heat exchanger - Very good condition. Hardly ever used - poor planning! Unfortunately no documents available.

Condition: excellent (used), Year of construction: 2020, Vacuum pump / Vacuum system Chodpsxcb Ixsfx Abcod Airflow: 280 m3/h Motor: 7.5 kW Vacuum tank: 500 L

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, Atlas Copco GA22 SP screw compressor – 22 kW | 7.5 bar | 60 l/s I will sell an industrial screw compressor of the renowned Atlas Copco brand, model GA22 SP, manufactured in 1996. The device is ideal for applications requiring a reliable source of compressed air in various industrial sectors. Technical data: Model: GA22 SP Chsdpfx Aov Dukgobcsd Motor power: 22 kW Maximum operating pressure: 7.5 bar Flow capacity (FAD): 60 l/s (216 m³/h) Shaft speed: 3000 rpm Power supply voltage: 400 V / 50 Hz Noise level: 74 dB(A) Dimensions (L x W x H): 770 x 850 x 1200 mm Weight: 405 kg Condition and use: The compressor is in good technical condition, regularly serviced and ready to work. It was used in controlled industrial conditions, which ensures its reliability and efficiency.

Condition: excellent (used), Year of construction: 2014, operating hours: 25,283 h, functionality: fully functional, Screw compressor Atlas Copco GA90FF. 90 kW with 8.25 bar and 16.48 m3/min. Integrated dryer. Chsdpfx Abjxctmyocsd

Condition: new, feed pressure 10 bar Chedpfsvkiztex Abcsd Effective free air delivery 252 L/min Receiver capacity 90 l / bar Number of cylinders 1 Stk. motor 400Volt / 1,5KW V / KW turning speeds 777 U/min weight of the machine ca. 70 kg. range L-W-H 0,97 x 0,5 x 0,9 mm

Condition: excellent (used), ATLAS COPCO GA37FF screw compressor with air dryer, serviced Csdpfsxlppcjx Abcshd

Condition: good (used), Year of construction: 2000, Atlas Copco ZT30 Air compressor Serial: AIF065086 2000, oil free air cooled screw compressor, operating pressure 8.6Bar, compressor output 69 l/s, motor 30Kw, comes with Ultrafilter International dryer model: HLALD0225 and Abbott air tank Cedpfjvtcw Tjx Abcjhd

Condition: ready for operation (used), functionality: fully functional, Atlas Copco FD 118 – Technical specifications (indicative) Type of device: Compressed air refrigeration dryer Air flow: Approx. 118 l/s (m3/min depending on version) Working pressure range: Usually up to 16 bar Dew point temperature: +3°C Chodpfx Abev Duzfecsd Power supply: 400V / 50Hz (other variants may be available) Refrigerant: R410A or R407C (depending on year) Nominal power: Approx. 1-2 kW Weight: Approx. 100-150 kg

Condition: excellent (used), Year of construction: 2018, operating hours: 27,910 h, functionality: fully functional, Inspected oil-free screw compressor Atlas Copco ZR160VSDFF. 160 kW. Year of manufacture: 2018. Only 27,910 hours. Full service history. Integrated drum dryer. Frequency controlled. Cedpfxexbh Ddo Abcshd

Condition: excellent (used), Year of construction: 2000, ATLAS COPCO GA30FF screw compressor with air dryer, serviced Csdexlpnlopfx Abcjhd Technical data: Capacity: 3.84 m3/min Motor power: 30 kW Max pressure: 13 bar Operating hours: 13,546 h Year: 2000 Price: 14,500 net 17,835 gross Compressor is fully functional. Service support is provided. Video link below.