15 units of Atlas Copco GA90 available from stock!

Atlas Copco GA90

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: API628950, Technical characteristics: Core Specifications Attribute Motor Power Max Operating Pressure Free Air Delivery (FAD) Cooling Type Noise Level Drive Type Integrated Dryer Hodpfx Afsxx Snbj Ssg Voltage Dimensions (L×W×H) Weight Performance & Features Elektronikon® Touch Controller: Advanced microprocessor for monitoring, control, and remote access. RDX Synthetic Oil: Long-life lubrication for reduced maintenance. Energy Efficiency: Specific power as low as 18.9 kW/100 CFM, depending on load. Integrated Refrigerated Dryer: Ensures clean, dry air with minimal pressure drop. Oil-Water Separator: Built-in for environmental compliance and air purity. Reliability & Maintenance IP55-rated motor: Dust and water-resistant for harsh environments. No-loss condensate drain: Prevents compressed air waste and reduces downtime. Sound-insulated bodywork: Minimizes noise and vibration Machine status: WORKING

Condition: used, Plant: lamella separator, lamella clarifier, lamella separator Condition: used, up to 120 m³/h depending on medium Design: robust, powerful design Material: VA on conatin frame, 30 ' container, scraper plates: in PP dimensions: LXBXH 7580X2435X3000 mm Weight: approx. 8000 kg Principle: The dirty water is fed to the inlet of the lamella separator and flows downwards in it. Due to the arrangement of the lamella plates in the lamella separator, the dirty water is diverted below the lamellae and flows upwards through the lamellae. Thus, the solids sink to the bottom of the lamellas. The purified water is transported to the outlet. The solids on the lamellas gradually slide down along the lamella plates. This is where the sludge funnel is located. Scraper: Optionally, we offer the lamella separator with a scraper, which keeps the sludge flowable. Application: Separation of solids and liquids by sedimentation. Lamella separators are often used as a preliminary stage before filter presses or decanters for thickening. By pre-thickening a thin sludge, the filter press can be sized smaller in terms of filter area. Hedpfjppyhtex Af Sjg The plant is in good condition and is available for rent or purchase. An inspection at our plant is possible by arrangement. We also offer new lamella separators with a delivery time of approx. 8 to 10 weeks !

Condition: ready for operation (used), functionality: fully functional, 2900 werkuren!!! Diesel-oil (1) -- Naphte (2) -- Electr (3): electric voltage: 3 x 380V - 50Hz Hsdexl Hxbepfx Af Ssg Low press. (1) High press (2) Screw (3): 12.75 bar screw compressor Volume flow rate: 18.3 m3/min Power imput: 90kW Volume (L): 1500 L

Condition: good (used), Year of construction: 2000, Screw compressor Manufacturer: Atlas Copco Type: GA 90 Hjdpfxovi E Uyj Af Sjg Year of construction: 2000 Power: 94 kW Pressure max: 10 bar Speed: 1,487 rpm

Year of construction: 2023, condition: new, Chillers with different refrigerants and low GWP values can be ordered ex works. Hedpfx Aehtfggjf Sjg We will be happy to advise you on the various refrigerants, application purposes, installation conditions.

Condition: excellent (used), Year of construction: 2006, operating hours: 32,000 h, Compressor in excellent condition, rewound motor. The machine is operational and tested. Technical specifications: Max pressure: 10 bar Hsdpfx Asxn Sw Ief Seg Power: 90 kW - 110 HP Capacity: 16,200 liters/min

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: AIF074692, power: 90 kW (122.37 HP), operating pressure: 9 bar, type of cooling: air, Equipment: compressed air system, compressor, type plate available, The Atlas Copco GA90 FF compressor is a reliable and efficient solution designed to meet demanding industrial requirements. As an oil-lubricated model, it uses oil to ensure optimal performance and enhanced durability. Although this unit is pre-owned, it retains the quality and robustness typical of the Atlas Copco brand. Hodpexnz Naofx Af Ssg With impressive rated power, the GA90 FF is perfectly suited for industrial applications where a consistent and reliable air supply is essential. Its integrated design facilitates easy installation and maintenance, reducing downtime and increasing productivity. Ideal for those seeking performance and reliability, the GA90 FF remains a top choice for industrial environments that require intensive compressor use.

Condition: new, Brand New - One Year Warranty Hedpfsvv R Hzjx Af Sog Max. die cutting size 1100 X 800 mm Working speed 23±2 s/min Max. rule length ≤30 m Motor power 5.5 kW Weight 4500 kg Overall machine dimensions 2080 X 1950 X 1900 mm

Condition: excellent (used), Year of construction: 2015, operating hours: 67,310 h, functionality: fully functional, 90 kW at 7.5 bar and 16.87 m3/min. Hedpfx Afowfckcj Seg Built in 2015 with approximately 67,310 hours.

Year of construction: 2008, condition: ready for operation (used), Operating pressure: 13bar, volume flow: 17.07m³/min, motor power: 90kW, motor speed: 3480rpm, weight: approx. 1750kg. The frequency converter of the machine is defective. An on-site inspection is possible. Hjdpjxmkc Tofx Af Sog

Condition: used, Year of construction: 1992, 2 KKSB submersible waste water pumps Both pumps = 7.5 kW Weight 164 kg Hedeu N E Htspfx Af Ssg *

Condition: excellent (used), Year of construction: 2017, operating hours: 28,625 h, functionality: fully functional, Premium screw compressor Atlas Copco GA90+. 90 kW, 8.5 bar with 16.50 m3/min. Only 28,625 operating hours. Hsdpfx Aeuqanajf Ssg With heat recovery, new compressor oil and new oil filters.

Condition: excellent (used), Year of construction: 2006, Atlas Copco GA 90 FF With integrated refrigerant dryer. Refrigerant R 404a. Hsdpfx Ajrk Nuyjf Sog

Condition: ready for operation (used), Cheap separator without control cabinet requires new belt Hsdpjwl N Hqofx Af Ssg

Condition: like new (used), Year of construction: 2012, operating hours: 11,118 h, functionality: fully functional, Premium second-hand Atlas Copco GA90 7.5 bar 16.21 m3/min Hsdpfxst E I D Ee Af Seg Only 11,118 operating hours