Used Tabe Agb-12 for sale (21,604)

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 917, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Spindle type: Z80-K530.04 Drive type: SIE / HD MACHINE DETAILS Power: 24.5 kW Voltage: 230 / 400 V Ibodpfx Ahjztxgmj Eja Frequency: 50 Hz Motor type: SERVO EQUIPMENT CE marking Measuring probe Tool holders (as shown in the picture)

Condition: ready for operation (used), Year of construction: 2004, machine/vehicle number: 111302, functionality: fully functional, temperature: -75 °C, total length: 1,300 mm, total width: 1,300 mm, total height: 2,000 mm, usable tank capacity: 100 l, The system was professionally dismantled and decommissioned by the manufacturer. The plates were stacked together. TECHNICAL DETAILS Ice condenser volume: 100 l Iedpszrfa Defx Ah Esba Ice condenser capacity: 12 kg Ice condenser output: 8 g/24 h Ice condenser temperature: −75 °C MACHINE DETAILS Platform dimensions: 350 × 450 mm Platform area: 0.48 m² Platform spacing: 111 mm Refrigerant: Isceon 89 Heat transfer fluid: Syltherm HF Electrical equipment: 400 Volt, 3 phases, 50 Hz Dimensions & Weight Space requirement for freeze-drying system: 1,300 × 1,300 × 2,000 mm Space requirement for additional component: 1,800 × 600 × 2,000 mm Weight: approx. 1,500 kg

Condition: used, machine/vehicle number: 008014, Max. panel length: 1250 mm Ibsdpfxswuz S De Ah Eoa Lateral horizontal groups: yes

Condition: used, machine/vehicle number: 007400, Max. panel width: 800 mm Max. panel length: 1250 mm Isdpfx Aet Hmt Ish Esba No of injectors: 1 Positioning of Units by NC: yes Lateral horizontal groups: yes

Condition: new, WAGO 750-323 Profibus DP 12 MBd/ Digital SN 93787 -unused!- ,unused, in sealed original packaging, 100% functional, scope of delivery as per photos Ibedpfx Aozu Htkeh Eea

Condition: ready for operation (used), Tool turret 5603923WZ SN:1285 with 12 stations for EMAG VSC 200 DUO, manufacturer unknown, used, normal signs of wear, 100% fully functional, scope of delivery as per photos. ATTENTION: Please enquire separately for costs of packing and shipping! Ibedpfx Aozu Hvxjh Eoa

Condition: ready for operation (used), Siemens A5E00302096 Panel system NEMA4 Touch 12" TFT SN: LBU9003862, serial number as per photo, used, slight signs of use, 100% functional, scope of delivery as per photos Ibjdpfx Ajzu Em Ash Eja

Condition: ready for operation (used), Siemens SINAMICS 6SL3111-4VE21-6EC1 Combi Power Module, SN: ZVPG4370136, used, in good condition, 100% functional. Delivery as shown in the photos. Professionally fully overhauled and tested with a 12-month warranty. 100% functional, delivery as per photos. The agreed sales discounts do not apply to this item. Please request the price separately! Isdpfx Aezu Ey Aeh Eoba

Condition: ready for operation (used), Tool turret 5603923WZ SN:1286 with 12 stations for EMAG VSC 200 DUO, manufacturer unknown, used, normal signs of wear, 100% functional, scope of delivery as per photos. ATTENTION: Please enquire for packing and shipping costs separately! Iedpozu Hv Ejfx Ah Esba

Condition: ready for operation (used), Trumpf 12-11-59-00/02 Radiation Protection B SN: , used, in good condition, 100% fully functional, scope of delivery as per photos. Ibjdpfszu Hkvsx Ah Esa

Condition: ready for operation (used), Trumpf 12-12-30-A32/09 disc laser S/N 1804667-00097 + power cable, used, minor signs of use, 100% functional, scope of delivery as per photos Iedpfx Aszu Hk Ash Eoba

Condition: new, WAGO 750-323 Profibus DP 12 MBd/ Digital SN 93787 – unused! – unused in opened original packaging, 100% functional, scope of delivery as per photos. Ibodpfozu Htqjx Ah Esa

Condition: ready for operation (used), Tool turret 5603923WZ with 12 stations for EMAG VSC 200 DUO, manufacturer unknown, used, normal signs of wear, 100% functional, scope of delivery as shown in the photos. ATTENTION: Please enquire for charges for packing and transport separately! Ijdpfozu Hvrsx Ah Eeba

Condition: excellent (used), Year of construction: 2019, operating hours: 7 h, ABB 2600-12/1.85 Type B +Trackmotion 2.9 meter,complete as new DTC 7 hours 2019 DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc. Isdpfxeyl Avqs Ah Eeba

Condition: excellent (used), Year of construction: 2016, ABB 2600-12/1.85 Type B Robot Full of options Ibodpfx Aoxq Ttijh Eja DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc.

Condition: used, Veneer machine with direct stacking Manufacturer: Fischer & Rückle Type: FZR15 / DAR 12 Year of manufacture: 2006 / 2014 Cross-feeding splicer For highly efficient cross-gluing of parallel-joined veneer strips into endless or component-specific veneer surfaces. The cut or rotary-cut veneers must be pre-glued with PVAc or urea adhesives. This cross-gluer is the most economical alternative to longitudinal gluers for cross-grain applications. Production Approx. 17-20 joining points/min Technical data Veneer strip length (grain direction): 350-1500 mm Veneer strip width (cross-grain direction): 50-500 mm Veneer strip thickness: 0.3-1.5 mm Equipment Feed device for efficient and convenient semi-automatic feeding of veneer strips. Plate automation for component-specific surfaces with pre-sorted components and a pre-selected number of veneer strips. Features - Perfect bonding of cut or rotary-cut veneer of all wood species, even with wavy or rippled veneer - Unique, tried-and-tested horizontal pressing system that results in fully closed, solid glue joints - Solid, robust construction for high durability, reliable and fail-safe operation - Easy operation thanks to screen, clear symbols, separate manometer with direct access, etc. - Liftable pressure bars for quick and easy access to the heating plates for cleaning - Few wear parts, low costs for service and maintenance Cross cutter Ibjdpezuz Hfsfx Ah Eoa For cutting to a pre-set format width (across the grain). The width is determined by two photoelectric cells that are mounted at the required distance from the cutter. Direct stacking device DAR-22 For outputting and stacking the veneer surface directly after splicing. The spliced surfaces are gently outputted and stacked on this compact direct stacking device without mechanical intervention. Min. veneer sheet length (grain direction): 350 mm Veneer sheet width (across the grain): 250 - 1200 mm Max. stack height approx. (small sheets are not perfectly aligned): 500 mm Max. stack width (across the grain) for discharge to the rear end: 1200 mm Note: The technical data and descriptions are a transcript of the original order confirmation. Data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2015, - X-axis 80 m/min - 18-position tool changer - Drilling head with 30 spindles - 6,000 x 1,550 mm CNC nesting machine Manufacturer: Homag Type: BMG511/60/12/R Year of manufacture: 2015 Ijdszux Tcspfx Ah Esba Technical data - X-axis 80 m/min - 18-position tool changer - Drilling head with 30 spindles - 6,000 x 1,550 mm Workpiece parameters: Length with single workpiece loading: 6,000 mm / with pendulum machining 1,550 - 3,200 mm Widths: Max. 1,550 mm with stop at the rear and milling diameter 25 mm Workpiece thickness 275 mm including clamping device Up to max. 60 mm with standard clamping device Speed Pack: Increase in the max. travel speed of the X-axis to 80 m/min. With tool transfer station, on the left side of the machine bed Rotary tool changer, 18 positions Option for 18 x 130 mm tool diameter or 9 x 180 + 9 x 70 mm. Aggregate length max. 320 mm Machining spindle 12 kW (12 kW in S6 operation, 9.5 kW in S1 operation) Frequency-controlled rotation 0 - 24,000 rpm. C-axis with aggregate interface Drive for all aggregates with pivoting axis, pivoting range without limitation. Interface for FLEX-5 aggregate Drilling head, 30 spindles: V20 / H10 / S360 MPU Multi-Processing Unit with C-axis +/- 185 for drilling and sawing operations at any angle. 20 vertical spindles in HIGH SPEED. Each drilling spindle with a quick-change system. Arrangement of spindles in a U-shape: 3 drilling rows with 11, 3 and 6 spindles, spindle spacing 32 mm 10 horizontal drilling spindles. 4 drilling spindle pairs with a spacing of 32 mm 1 drilling spindle pair spacing 320 mm Grooving and cut-off saw for max. saw blade diameter 200 mm. Basic design, slatted table: Slatted table with grooved aluminum profile Dynamic workpiece positioning on R-table The machine automatically checks the maximum possible part dimension based on the program layout. The vacuum areas are permanently assigned to the machining areas. Machine control POWERCONTROL PC 86 POWERTOUCH with 21.5 Full-HD multi-touch display WoodWop for graphical, dialog-oriented creation of CNC programs. The machine is supplied via an on-site vacuum system. Without its own vacuum pump.

Condition: used, functionality: fully functional, Year of construction: 2009, operating hours: 4,133 h, load capacity: 16,000 kg, lifting height: 5,000 mm, fuel type: diesel, mast type: simplex, construction height: 4,200 mm, drive type: Diesel, Diesel forklift Mast type: Standard Condition: Ready for use and fully functional Technical condition: good Sideshift, fork positioner, Ibsdpfx Ajzuqdyeh Eea 3rd valve, 4th valve, heating, full cab,

Condition: ready for operation (used), Siemens A5E00228005 Panel system NEMA 4 Touch 12" TFT SN: ST-S42025925, serial number as per photo, used, slight signs of use, 100% functional, scope of delivery as per photos Iedpfx Ahexahkus Ejba

Condition: excellent (used), Wire electrode, stainless steel welding wire, welding wire -Large roll -Wire thickness: 1.2 mm Ibedpfx Ahod Elvve Eja -Wire electrode: high-alloy, chemically resistant -Number: 4x casters available Price: per package -Weight: 12 kg

Year of construction: 1998, condition: used, x-travel // mm y-travel / mm z-travel // mm total power requirement / kW weight of the machine ca. 950 KG Isdpfxsig A Ere Ah Esba

Condition: used, BKF 12/120 / 400-2009 400 V 120 A Weight: 10 kg Isdpfezcgicsx Ah Eoba

Condition: used, functionality: fully functional, machine/vehicle number: B40400483, Year of construction: 2018, operating hours: 8,889 h, load capacity: 17,000 kg, lifting height: 4,000 mm, fuel type: diesel, mast type: duplex, motor manufacturer: Cummins, gearing type: automatic, total height: 3,695 mm, Equipment: CE marking, UVV, air conditioning, centralized greasing system, lighting, seat heater, DCG160-12 with a lifting capacity of 17,000 kg. Ibsdpfx Ahezucv Ue Eoa

Condition: used, machine/vehicle number: B40402121, Year of construction: 2023, operating hours: 4,042 h, load capacity: 16,000 kg, lifting height: 5,000 mm, load center: 1,200 mm, fuel type: diesel, mast type: duplex, motor manufacturer: Cummins, fork carriage width: 2,500 mm, fork length: 2,600 mm, turning radius (outer): 5,175 mm, front tire size: 12.00 x 20, rear tire size: 12.00 x 20, total height: 4,195 mm, Equipment: CE marking, UVV, air conditioning, centralized greasing system, lighting, DCG160-12 Iedpfx Aszucqloh Esba B40402121

Condition: used, functionality: fully functional, machine/vehicle number: B40402120, Year of construction: 2023, operating hours: 5,056 h, load capacity: 16,000 kg, lifting height: 5,000 mm, load center: 1,200 mm, fuel type: diesel, mast type: duplex, motor manufacturer: Cummins, fork carriage width: 2,500 mm, fork length: 2,600 mm, turning radius (outer): 5,175 mm, front tire size: 12.00x20, rear tire size: 12.00x20, total height: 4,195 mm, Equipment: CE marking, UVV, air conditioning, cabin, centralized greasing system, lighting, B40402120 Isdjzucn Rjpfx Ah Esba DCG160-12